- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-libosmocore » a2=default,a3=default,a4=default,amd64,io_uring #4219
by jenkins＠lists.osmocom.org 28 Jan '25

28 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> Changes: ------------------------------------------ [...truncated 2.08 MiB...] stepping : 2 microcode : 0x37 cpu MHz : 3502.329 cache size : 24576 KB physical id : 0 siblings : 20 core id : 29 cpu cores : 14 apicid : 58 initial apicid : 58 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 18 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 800.000 cache size : 24576 KB physical id : 0 siblings : 20 core id : 30 cpu cores : 14 apicid : 60 initial apicid : 60 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 19 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 800.000 cache size : 24576 KB physical id : 0 siblings : 20 core id : 31 cpu cores : 14 apicid : 62 initial apicid : 62 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: /bin/bash './testsuite' ENABLE_URING=yes ENABLE_URING_TESTS=yes ## -------------------------------------- ## ## libosmocore 1.10.0.63-d25f test suite. ## ## -------------------------------------- ## Regression tests. 1: a5 ok 2: abis ok 3: ctrl ok 4: kasumi ok 5: bits ok 6: bitvec ok 7: bitcomp ok 8: bitfield ok 9: conv ok 10: conv_gsm0503 ok 11: coding ok 12: msgb ok 13: gea ok 14: msgfile ok 15: sms ok 16: smscb ok 17: smscb_gsm0341 ok 18: smscb_cbsp ok 19: ussd ok 20: auth ok 21: auth_xor2g ok 22: comp128 ok 23: lapd ok 24: gsm0502 ok 25: dtx ok 26: gsm0808 ok 27: gsm29205 ok 28: gsm0408 ok 29: gsm48_rest_octets ok 30: gprs ok 31: logging_stream ok 32: logging_wqueue ok 33: logging_gsmtap ok 34: codec ok 35: codec_ecu_fr ok 36: codec_efr_sid ok 37: codec_fr_sid ok 38: codec_hr_sid ok 39: fr ok 40: loggingrb ok 41: strrb ok 42: vty ok 43: gprs-bssgp ok 44: gprs-bssgp-rim ok 45: gprs-ns ok 46: gprs-ns2 ok 47: utils ok 48: stats ok 49: write_queue ok 50: bssgp-fc ok 51: sim ok 52: timer ok 53: clk_override ok 54: tlv ok 55: gsup ok 56: fsm ok 57: fsm_dealloc ok 58: oap ok 59: oap_client ok 60: socket ok 61: socket_sctp ok 62: osmo-auc-gen ok 63: endian ok 64: sercomm ok 65: prbs ok 66: gsm23003 ok 67: gsm23236 ok 68: tdef ok 69: sockaddr_str ok 70: use_count ok 71: context ok 72: exec ok 73: i460_mux ok 74: bitgen ok 75: gad ok 76: bsslap ok 77: bssmap_le ok 78: it_q ok 79: base64 ok 80: time_cc ok 81: iuup ok 82: v110_frame_test ok 83: v110_ra1_test ok 84: v110_ta_test ok 85: gsm44021_frame_csd_test ok 86: osmo_io ok 87: osmo_io (uring) FAILED (testsuite.at:554) 88: soft_uart ok 89: rlp ok 90: jhash ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 90 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [libosmocore 1.10.0.63-d25f] testsuite: 87 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [Makefile:3594: check-local] Error 1 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:2922: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:2924: check] Error 2 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:747: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:1046: check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/87/testsuite.log # -*- compilation -*- 87. testsuite.at:549: testing osmo_io (uring) ... ./testsuite.at:554: LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test /build/tests/testsuite.dir/at-groups/87/test-source: line 29: 71306 Aborted ( $at_check_trace; LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test ) >> "$at_stdout" 2>> "$at_stderr" 5>&- --- experr 2025-01-27 23:55:47.238536377 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stderr 2025-01-27 23:55:47.242536356 +0000 @@ -0,0 +1 @@ +Assert failed file_bytes_write_compl == sizeof(TESTDATA) osmo_io/osmo_io_test.c:113 --- expout 2025-01-27 23:55:47.238536377 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stdout 2025-01-27 23:55:47.242536356 +0000 @@ -1,18 +1,2 @@ Running test_file Enable write -file-iofd: write() returned rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Enable read -file-iofd: read() msg with rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -file-iofd: read() msg with rc=0 - -Running test_connected -ep1: write() returned rc=0 -ep1: write() returned rc=16 -ep2: read() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Running test_unconnected -ep1: sendto() returned rc=16 -ep2: recvfrom() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 ./testsuite.at:554: exit code was 134, expected 0 87. testsuite.at:549: 87. osmo_io (uring) (testsuite.at:549): FAILED (testsuite.at:554) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1720203 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-hnbgw-test #1116
by jenkins＠lists.osmocom.org 26 Jan '25

26 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/1116/display/redir…>

1 1

Jenkins build became unstable: ttcn3-pgw-test #1036
by jenkins＠lists.osmocom.org 26 Jan '25

26 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pgw-test/1036/display/redirect>

1 1

Build failed in Jenkins: Osmocom-build-tags-against-master #2181
by jenkins＠lists.osmocom.org 26 Jan '25

26 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/2…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/fixeria/fixes Seen branch in repository origin/laforge/dahdi-wip Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/obs Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/centos-install-test Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/fix-python3 Seen branch in repository origin/osmith/gerrit-lint Seen branch in repository origin/osmith/gerrit-mail-on-success Seen branch in repository origin/osmith/ggsn-kernel-mod-test Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/obs-check-builders Seen branch in repository origin/osmith/obs-fixes Seen branch in repository origin/osmith/obs-latest-fix Seen branch in repository origin/osmith/obs-mirror Seen branch in repository origin/osmith/obs-nftables Seen branch in repository origin/osmith/offline-nodes Seen branch in repository origin/osmith/rpm Seen branch in repository origin/osmith/ttcn3-centos Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/osmith/wip-ci-packaging Seen branch in repository origin/osmith/wip-docuum Seen branch in repository origin/osmith/wip-lint-lib-deps Seen branch in repository origin/osmith/wip-manuals Seen branch in repository origin/osmith/wip-obs Seen branch in repository origin/osmith/wip-obs-asan Seen branch in repository origin/osmith/wip-os-6165 Seen branch in repository origin/osmith/wip-repo-install-qemu Seen branch in repository origin/osmith/wip-testenv Seen branch in repository origin/pespin/limesuite-latest Seen branch in repository origin/pespin/master Seen branch in repository origin/pespin/open5gs Seen 37 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision c792b8c79ee92af6a34c4c06ec01a985c8902f94 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f c792b8c79ee92af6a34c4c06ec01a985c8902f94 # timeout=10 Commit message: "coverity: use proper asn1c branch" > git rev-list --no-walk c792b8c79ee92af6a34c4c06ec01a985c8902f94 # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins10693886176038801288.sh + docker run --rm=true -e PARALLEL_MAKE=-j8 -u build -v <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…>:/build -w /build osmocom-build/debian-bookworm-build scripts/osmocom-build-old-tags-against-master.sh Temp dir: /build/_temp Building libraries from current master... * libosmocore c31e0bbe72360cca4f53a8d99092b83cd95b7cd0 --- BUILD FAILED: libosmocore-c31e0bbe72360cca4f53a8d99092b83cd95b7cd0.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [libosmocore 1.10.0.62-c31e0] testsuite: 87 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [Makefile:3594: check-local] Error 1 make[4]: Leaving directory '/build/_deps/libosmocore/tests' make[3]: *** [Makefile:2922: check-am] Error 2 make[3]: Leaving directory '/build/_deps/libosmocore/tests' make[2]: *** [Makefile:2924: check] Error 2 make[2]: Leaving directory '/build/_deps/libosmocore/tests' make[1]: *** [Makefile:747: check-recursive] Error 1 make[1]: Leaving directory '/build/_deps/libosmocore' make: *** [Makefile:1046: check] Error 2 --- Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-libosmocore » a2=default,a3=default,a4=default,amd64,io_uring #4214
by jenkins＠lists.osmocom.org 24 Jan '25

24 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> Changes: ------------------------------------------ [...truncated 2.08 MiB...] stepping : 2 microcode : 0x37 cpu MHz : 3500.752 cache size : 24576 KB physical id : 0 siblings : 20 core id : 29 cpu cores : 14 apicid : 58 initial apicid : 58 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 18 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 3504.218 cache size : 24576 KB physical id : 0 siblings : 20 core id : 30 cpu cores : 14 apicid : 60 initial apicid : 60 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 19 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 3499.311 cache size : 24576 KB physical id : 0 siblings : 20 core id : 31 cpu cores : 14 apicid : 62 initial apicid : 62 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: /bin/bash './testsuite' ENABLE_URING=yes ENABLE_URING_TESTS=yes ## --------------------------------------- ## ## libosmocore 1.10.0.62-c31e0 test suite. ## ## --------------------------------------- ## Regression tests. 1: a5 ok 2: abis ok 3: ctrl ok 4: kasumi ok 5: bits ok 6: bitvec ok 7: bitcomp ok 8: bitfield ok 9: conv ok 10: conv_gsm0503 ok 11: coding ok 12: msgb ok 13: gea ok 14: msgfile ok 15: sms ok 16: smscb ok 17: smscb_gsm0341 ok 18: smscb_cbsp ok 19: ussd ok 20: auth ok 21: auth_xor2g ok 22: comp128 ok 23: lapd ok 24: gsm0502 ok 25: dtx ok 26: gsm0808 ok 27: gsm29205 ok 28: gsm0408 ok 29: gsm48_rest_octets ok 30: gprs ok 31: logging_stream ok 32: logging_wqueue ok 33: logging_gsmtap ok 34: codec ok 35: codec_ecu_fr ok 36: codec_efr_sid ok 37: codec_fr_sid ok 38: codec_hr_sid ok 39: fr ok 40: loggingrb ok 41: strrb ok 42: vty ok 43: gprs-bssgp ok 44: gprs-bssgp-rim ok 45: gprs-ns ok 46: gprs-ns2 ok 47: utils ok 48: stats ok 49: write_queue ok 50: bssgp-fc ok 51: sim ok 52: timer ok 53: clk_override ok 54: tlv ok 55: gsup ok 56: fsm ok 57: fsm_dealloc ok 58: oap ok 59: oap_client ok 60: socket ok 61: socket_sctp ok 62: osmo-auc-gen ok 63: endian ok 64: sercomm ok 65: prbs ok 66: gsm23003 ok 67: gsm23236 ok 68: tdef ok 69: sockaddr_str ok 70: use_count ok 71: context ok 72: exec ok 73: i460_mux ok 74: bitgen ok 75: gad ok 76: bsslap ok 77: bssmap_le ok 78: it_q ok 79: base64 ok 80: time_cc ok 81: iuup ok 82: v110_frame_test ok 83: v110_ra1_test ok 84: v110_ta_test ok 85: gsm44021_frame_csd_test ok 86: osmo_io ok 87: osmo_io (uring) FAILED (testsuite.at:554) 88: soft_uart ok 89: rlp ok 90: jhash ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 90 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [libosmocore 1.10.0.62-c31e0] testsuite: 87 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [Makefile:3594: check-local] Error 1 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:2922: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:2924: check] Error 2 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:747: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:1046: check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/87/testsuite.log # -*- compilation -*- 87. testsuite.at:549: testing osmo_io (uring) ... ./testsuite.at:554: LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test /build/tests/testsuite.dir/at-groups/87/test-source: line 29: 71291 Aborted ( $at_check_trace; LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test ) >> "$at_stdout" 2>> "$at_stderr" 5>&- --- experr 2025-01-23 23:55:48.285599206 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stderr 2025-01-23 23:55:48.285599206 +0000 @@ -0,0 +1 @@ +Assert failed file_read_wr_compl_counter == 1 osmo_io/osmo_io_test.c:105 --- expout 2025-01-23 23:55:48.281599237 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stdout 2025-01-23 23:55:48.285599206 +0000 @@ -1,18 +0,0 @@ -Running test_file -Enable write -file-iofd: write() returned rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Enable read -file-iofd: read() msg with rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -file-iofd: read() msg with rc=0 - -Running test_connected -ep1: write() returned rc=0 -ep1: write() returned rc=16 -ep2: read() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Running test_unconnected -ep1: sendto() returned rc=16 -ep2: recvfrom() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 ./testsuite.at:554: exit code was 134, expected 0 87. testsuite.at:549: 87. osmo_io (uring) (testsuite.at:549): FAILED (testsuite.at:554) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 633709 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-asterisk-ims-ue-test #329
by jenkins＠lists.osmocom.org 24 Jan '25

24 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/329/disp…>

1 1

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #47160
by jenkins＠lists.osmocom.org 24 Jan '25

24 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 799.68 KiB...] logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.1 network network country code 001 mobile network code 01 short name OsmoMSC long name OsmoMSC encryption a5 0 encryption uea 1 2 authentication optional rrlp mode none mm info 1 mgw 0 local-port 2728 remote-ip 127.0.0.1 remote-port 2427 msc mncc internal mncc guard-timeout 180 ncss guard-timeout 30 assign-tmsi cs7-instance-a 0 cs7-instance-iu 0 auth-tuple-max-reuse-count 3 auth-tuple-reuse-on-error 1 mncc-int default-codec tch-f fr default-codec tch-h hr smpp local-tcp-port 2775 policy closed no smpp-first hlr remote-ip 127.0.0.1 remote-port 4222 ipa-name unnamed-MSC sgs local-port 29118 local-ip 0.0.0.0 vlr-name vlr.example.net smsc queue max-pending 20 queue max-failure 1 database delete-delivered 1 database delete-expired 1 validity-period minimum 1 validity-period default 10080 asci disable gcr end [1;33mDMSC[0;m [1;33mNOTICE[0;m Terminating due to signal 15 (msc_main.c:286) full talloc report on 'osmo_msc' (total 19988 bytes in 100 blocks) asn1 contains 0 bytes in 1 blocks (ref 0) 0x55ba228c23a0 struct osmo_ss7_instance contains 5287 bytes in 42 blocks (ref 0) 0x55ba228cb2c0 struct osmo_ss7_user contains 37 bytes in 2 blocks (ref 0) 0x55ba228aa860 SCCP contains 5 bytes in 1 blocks (ref 0) 0x55ba228c6020 struct osmo_sccp_instance contains 927 bytes in 8 blocks (ref 0) 0x55ba228c1650 struct osmo_sccp_user contains 93 bytes in 2 blocks (ref 0) 0x55ba228dba50 OsmoMSC-IuCS contains 13 bytes in 1 blocks (ref 0) 0x55ba228dbb10 struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x55ba228ce620 OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x55ba228db8d0 struct osmo_sccp_user contains 96 bytes in 2 blocks (ref 0) 0x55ba228db790 SCCP Management contains 16 bytes in 1 blocks (ref 0) 0x55ba228db850 sccp_user.c:242 contains 560 bytes in 1 blocks (ref 0) 0x55ba228db4f0 struct osmo_ss7_asp contains 3003 bytes in 19 blocks (ref 0) 0x55ba22778ee0 struct osmo_fsm_inst contains 373 bytes in 4 blocks (ref 0) 0x55ba228db2a0 struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x55ba228c0b30 XUA_ASP(asp-clnt-OsmoMSC-A-Iu)[0x55ba228db2a0] contains 47 bytes in 1 blocks (ref 0) 0x55ba228db450 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55ba228db3d0 struct osmo_stream_cli contains 978 bytes in 4 blocks (ref 0) 0x55ba22757170 localhost contains 10 bytes in 1 blocks (ref 0) 0x55ba228d39b0 localhost contains 10 bytes in 1 blocks (ref 0) 0x55ba228d69e0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55ba228d2710 struct osmo_fsm_inst contains 284 bytes in 4 blocks (ref 0) 0x55ba228a4400 struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x55ba228c10b0 xua_default_lm(asp-clnt-OsmoMSC-A-Iu)[0x55ba228a4400] contains 54 bytes in 1 blocks (ref 0) 0x55ba228ce920 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55ba228a4530 localhost contains 10 bytes in 1 blocks (ref 0) 0x55ba228a4380 localhost contains 10 bytes in 1 blocks (ref 0) 0x55ba228d2570 osmo_ss7_asp.c:564 contains 280 bytes in 1 blocks (ref 0) 0x55ba228a4200 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55ba228a4180 rate_ctr.c:233 contains 302 bytes in 2 blocks (ref 0) 0x55ba228a4000 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55ba228ce6f0 struct osmo_ss7_as contains 868 bytes in 8 blocks (ref 0) 0x55ba227555b0 struct osmo_fsm_inst contains 378 bytes in 4 blocks (ref 0) 0x55ba228aa2b0 struct xua_as_fsm_priv contains 112 bytes in 1 blocks (ref 0) 0x55ba228caa60 XUA_AS(as-clnt-OsmoMSC-A-Iu)[0x55ba228aa2b0] contains 45 bytes in 1 blocks (ref 0) 0x55ba228aa3e0 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55ba228c5dc0 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55ba228c1350 rate_ctr.c:233 contains 221 bytes in 2 blocks (ref 0) 0x55ba228aa180 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55ba228cb4e0 struct osmo_ss7_route_table contains 148 bytes in 4 blocks (ref 0) 0x55ba228c3190 struct osmo_ss7_route contains 85 bytes in 2 blocks (ref 0) 0x55ba228c0a50 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55ba228c1410 system contains 7 bytes in 1 blocks (ref 0) 0x55ba228c5f20 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x55ba228a5440 struct osmo_stream_srv_link contains 1944 bytes in 2 blocks (ref 0) 0x55ba228a3500 0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x55ba228a3d00 struct sgs_state contains 376 bytes in 1 blocks (ref 0) 0x55ba228a3320 struct smsc contains 152 bytes in 1 blocks (ref 0) 0x55ba22752f90 sms.db contains 7 bytes in 1 blocks (ref 0) 0x55ba227bac30 struct sms_queue_config contains 32 bytes in 1 blocks (ref 0) 0x55ba227baba0 struct gsm_network contains 11379 bytes in 32 blocks (ref 0) 0x55ba227557b0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x55ba228db950 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x55ba228c1710 struct gsm_sms_queue contains 776 bytes in 4 blocks (ref 0) 0x55ba2277a800 rate_ctr.c:233 contains 440 bytes in 1 blocks (ref 0) 0x55ba228a6290 stat_item.c:195 contains 104 bytes in 2 blocks (ref 0) 0x55ba228a4db0 struct osmo_stat_item contains 56 bytes in 1 blocks (ref 0) 0x55ba228a4e50 struct gsup_client_mux contains 682 bytes in 6 blocks (ref 0) 0x55ba228a4b70 struct osmo_gsup_client contains 514 bytes in 4 blocks (ref 0) 0x55ba2279dc70 struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x55ba228a4c40 struct ipa_client_conn contains 202 bytes in 2 blocks (ref 0) 0x55ba22757b20 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55ba228a4ce0 struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x55ba228a5760 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x55ba228a4950 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55ba228a5980 struct vlr_instance contains 2496 bytes in 5 blocks (ref 0) 0x55ba22754060 rate_ctr.c:233 contains 2040 bytes in 1 blocks (ref 0) 0x55ba2288d880 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x55ba2288d700 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x55ba2288d7a0 struct osmo_nri_ranges contains 16 bytes in 1 blocks (ref 0) 0x55ba2288d680 struct mgcp_client_conf contains 1088 bytes in 1 blocks (ref 0) 0x55ba227ba6f0 struct mgcp_client_pool contains 2877 bytes in 7 blocks (ref 0) 0x55ba227ba660 struct mgcp_client_pool_member contains 2716 bytes in 4 blocks (ref 0) 0x55ba228a5b90 struct mgcp_client contains 1580 bytes in 3 blocks (ref 0) 0x55ba228a9c00 struct osmo_io_fd contains 284 bytes in 2 blocks (ref 0) 0x55ba227581b0 r=127.0.0.1:2427<->l=127.0.0.1:2728 contains 36 bytes in 1 blocks (ref 0) 0x55ba228c1850 struct cmd_node contains 121 bytes in 2 blocks (ref 0) 0x55ba22755f80 %s(config-mgw)# contains 17 bytes in 1 blocks (ref 0) 0x55ba227dc870 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55ba227b9790 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x55ba227ba4e0 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x55ba22756320 rate_ctr.c:233 contains 2520 bytes in 1 blocks (ref 0) 0x55ba227b9aa0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x55ba227a7440 utils.c:386 contains 203 bytes in 1 blocks (ref 0) 0x55ba226dea20 utils.c:386 contains 46 bytes in 1 blocks (ref 0) 0x55ba226de980 utils.c:386 contains 165 bytes in 1 blocks (ref 0) 0x55ba226de870 utils.c:386 contains 43 bytes in 1 blocks (ref 0) 0x55ba226de7d0 transaction contains 0 bytes in 1 blocks (ref 0) 0x55ba226baa70 gsm_call contains 0 bytes in 1 blocks (ref 0) 0x55ba226baa00 sms contains 0 bytes in 1 blocks (ref 0) 0x55ba226ba990 osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x55ba226ba920 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba228ce840 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba228c5f90 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba228a53b0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba228a54b0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba228a58f0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba228a5a80 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55ba22852fb0 msgb contains 0 bytes in 1 blocks (ref 0) 0x55ba226ba8b0 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x55ba228a5220 signal 15 received Terminating took 0.897s RESULTS: pass: ../../../tests/test_neighbor_ident.vty pass: ../../../tests/test_nodes.vty rm -f ./sms.db* make[8]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[7]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make ctrl-test make[7]: Entering directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make ctrl-python-test make[8]: Entering directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' ../../../tests/ctrl_test_runner.py -w /build/osmo-msc-1.12.1.32-b8e4/_build/sub -v testRateCounters (__main__.TestCtrlMSC.testRateCounters) ... ERROR ====================================================================== ERROR: testRateCounters (__main__.TestCtrlMSC.testRateCounters) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests/../../../tests/ctrl_test_runner.py", line 69, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 1 test in 2.171s FAILED (errors=1) confpath /build/osmo-msc-1.12.1.32-b8e4/tests/.., workdir /build/osmo-msc-1.12.1.32-b8e4/_build/sub Running tests for specific control commands Opening /dev/null Launching: PWD=/build/osmo-msc-1.12.1.32-b8e4/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.32-b8e4/tests/../doc/examples/osmo-msc/osmo-msc.cfg' Connecting to host 127.0.0.1:4255 Sending "GET 1000 rate_ctr.*" Got message: b'ERROR 1000 GET variable contains invalid characters' Decoded replies: {1000: {'mtype': b'ERROR', 'id': 1000, 'var': b'GET', 'value': b'variable contains invalid characters'}} Process returned code: -6 make[8]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[8]: *** [Makefile:747: ctrl-python-test] Error 1 make[7]: *** [Makefile:758: ctrl-test] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[6]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[6]: *** [Makefile:714: python-tests] Error 2 make[5]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[4]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[5]: *** [Makefile:767: check-local] Error 2 make[4]: *** [Makefile:572: check-am] Error 2 make[3]: *** [Makefile:422: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub/tests' make[2]: *** [Makefile:471: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub' make[1]: *** [Makefile:770: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.12.1.32-b8e4/_build/sub' make: *** [Makefile:690: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2452920 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: Osmocom_OBS_sync #535
by jenkins＠lists.osmocom.org 23 Jan '25

23 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_sync/535/display/redire…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_sync/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_sync/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision c792b8c79ee92af6a34c4c06ec01a985c8902f94 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f c792b8c79ee92af6a34c4c06ec01a985c8902f94 # timeout=10 Commit message: "coverity: use proper asn1c branch" > git rev-list --no-walk c792b8c79ee92af6a34c4c06ec01a985c8902f94 # timeout=10 [Osmocom_OBS_sync] $ /bin/sh -xe /tmp/jenkins14496447078292225230.sh + export PYTHONUNBUFFERED=1 + export DISTROS= Debian:10 Debian:11 Debian:12 Debian:Next Raspbian:10 Raspbian:11 Raspbian:12 Ubuntu:22.04 Ubuntu:24.04 Ubuntu:24.10 + ./scripts/obs/sync_obs_projects.py --docker Debian:10 Debian:11 Debian:12 Debian:Next Raspbian:10 Raspbian:11 Raspbian:12 Ubuntu:22.04 Ubuntu:24.04 Ubuntu:24.10 docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_sync/ws/scripts/obs/dat…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_sync/ws/scripts/obs/data']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 579B done #1 DONE 0.1s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.1s #3 [internal] load metadata for docker.io/library/debian:12 #3 DONE 1.3s #4 [1/3] FROM docker.io/library/debian:12@sha256:321341744acb788e251ebd374aecc1a42d60ce65da7bd4ee9207ff6be6686a62 #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed sphinx-common && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:3840005fe0a1f522e3e57d1c633e0efb93486d14c70afb4abb2f5a8922fb04bd done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg done #7 DONE 0.0s docker: running: sync_obs_projects.py inside docker OBS: getting list of projects (https://obs.osmocom.org) Debian:10: getting prjconf Debian:10: getting meta openSUSE.org-mirror:Debian:10: getting prjconf openSUSE.org-mirror:Debian:10: is up-to-date Debian:11: getting prjconf Debian:11: getting meta Traceback (most recent call last): File "/obs/sync_obs_projects.py", line 323, in <module> ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://api.opensuse.org', 'meta', 'prj', 'Debian:11'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 503: Service Unavailable Request: https://api.opensuse.org/source/Debian:11/_meta Headers: Date: Wed, 22 Jan 2025 18:16:10 GMT Server: Apache/2.4.58 (Linux/SUSE) Strict-Transport-Security: max-age=31536000 cache-control: no-cache, no-store, must-revalidate content-length: 189 status: 503 Service Unavailable content-type: text/html; charset=UTF-8 Connection: close *** python trace *** main() File "/obs/sync_obs_projects.py", line 300, in main lib.osc.get_meta(temp_source_meta) File "/obs/lib/osc.py", line 168, in get_meta meta = lib.osc.run_osc(["meta", "prj", proj]).output ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-libosmocore » a2=default,a3=default,a4=default,amd64,io_uring #4212
by jenkins＠lists.osmocom.org 22 Jan '25

22 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> Changes: ------------------------------------------ [...truncated 2.08 MiB...] stepping : 2 microcode : 0x37 cpu MHz : 800.000 cache size : 24576 KB physical id : 0 siblings : 20 core id : 29 cpu cores : 14 apicid : 58 initial apicid : 58 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 18 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 3490.492 cache size : 24576 KB physical id : 0 siblings : 20 core id : 30 cpu cores : 14 apicid : 60 initial apicid : 60 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 19 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 800.000 cache size : 24576 KB physical id : 0 siblings : 20 core id : 31 cpu cores : 14 apicid : 62 initial apicid : 62 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: /bin/bash './testsuite' ENABLE_URING=yes ENABLE_URING_TESTS=yes ## --------------------------------------- ## ## libosmocore 1.10.0.62-c31e0 test suite. ## ## --------------------------------------- ## Regression tests. 1: a5 ok 2: abis ok 3: ctrl ok 4: kasumi ok 5: bits ok 6: bitvec ok 7: bitcomp ok 8: bitfield ok 9: conv ok 10: conv_gsm0503 ok 11: coding ok 12: msgb ok 13: gea ok 14: msgfile ok 15: sms ok 16: smscb ok 17: smscb_gsm0341 ok 18: smscb_cbsp ok 19: ussd ok 20: auth ok 21: auth_xor2g ok 22: comp128 ok 23: lapd ok 24: gsm0502 ok 25: dtx ok 26: gsm0808 ok 27: gsm29205 ok 28: gsm0408 ok 29: gsm48_rest_octets ok 30: gprs ok 31: logging_stream ok 32: logging_wqueue ok 33: logging_gsmtap ok 34: codec ok 35: codec_ecu_fr ok 36: codec_efr_sid ok 37: codec_fr_sid ok 38: codec_hr_sid ok 39: fr ok 40: loggingrb ok 41: strrb ok 42: vty ok 43: gprs-bssgp ok 44: gprs-bssgp-rim ok 45: gprs-ns ok 46: gprs-ns2 ok 47: utils ok 48: stats ok 49: write_queue ok 50: bssgp-fc ok 51: sim ok 52: timer ok 53: clk_override ok 54: tlv ok 55: gsup ok 56: fsm ok 57: fsm_dealloc ok 58: oap ok 59: oap_client ok 60: socket ok 61: socket_sctp ok 62: osmo-auc-gen ok 63: endian ok 64: sercomm ok 65: prbs ok 66: gsm23003 ok 67: gsm23236 ok 68: tdef ok 69: sockaddr_str ok 70: use_count ok 71: context ok 72: exec ok 73: i460_mux ok 74: bitgen ok 75: gad ok 76: bsslap ok 77: bssmap_le ok 78: it_q ok 79: base64 ok 80: time_cc ok 81: iuup ok 82: v110_frame_test ok 83: v110_ra1_test ok 84: v110_ta_test ok 85: gsm44021_frame_csd_test ok 86: osmo_io ok 87: osmo_io (uring) FAILED (testsuite.at:554) 88: soft_uart ok 89: rlp ok 90: jhash ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 90 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [libosmocore 1.10.0.62-c31e0] testsuite: 87 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [Makefile:3594: check-local] Error 1 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:2922: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:2924: check] Error 2 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:747: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:1046: check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/87/testsuite.log # -*- compilation -*- 87. testsuite.at:549: testing osmo_io (uring) ... ./testsuite.at:554: LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test /build/tests/testsuite.dir/at-groups/87/test-source: line 29: 71303 Aborted ( $at_check_trace; LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test ) >> "$at_stdout" 2>> "$at_stderr" 5>&- --- experr 2025-01-21 23:55:47.155153295 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stderr 2025-01-21 23:55:47.187153116 +0000 @@ -0,0 +1 @@ +Assert failed file_read_wr_compl_counter == 1 osmo_io/osmo_io_test.c:105 --- expout 2025-01-21 23:55:47.155153295 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stdout 2025-01-21 23:55:47.179153161 +0000 @@ -1,18 +0,0 @@ -Running test_file -Enable write -file-iofd: write() returned rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Enable read -file-iofd: read() msg with rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -file-iofd: read() msg with rc=0 - -Running test_connected -ep1: write() returned rc=0 -ep1: write() returned rc=16 -ep2: read() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Running test_unconnected -ep1: sendto() returned rc=16 -ep2: recvfrom() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 ./testsuite.at:554: exit code was 134, expected 0 87. testsuite.at:549: 87. osmo_io (uring) (testsuite.at:549): FAILED (testsuite.at:554) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3060311 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-libosmo-sigtran » a1=default,a2=default,a3=default,a4=default,osmocom-master #391
by jenkins＠lists.osmocom.org 21 Jan '25

21 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-libosmo-sigtran/a1=default,a…> Changes: ------------------------------------------ [...truncated 58.38 KiB...] specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src/ctrl' make[3]: Leaving directory '/build/deps/libosmocore/src/ctrl' Making install in pseudotalloc make[3]: Entering directory '/build/deps/libosmocore/src/pseudotalloc' make[4]: Entering directory '/build/deps/libosmocore/src/pseudotalloc' make[4]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc' make[3]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc' Making install in sim make[3]: Entering directory '/build/deps/libosmocore/src/sim' CC core.lo CC reader.lo CC class_tables.lo CC card_fs_sim.lo CC card_fs_usim.lo CC card_fs_uicc.lo CC card_fs_hpsim.lo CC card_fs_isim.lo CC card_fs_tetra.lo CC reader_pcsc.lo CCLD libosmosim.la make[4]: Entering directory '/build/deps/libosmocore/src/sim' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmosim.la' libtool: install: (cd /build/deps/libosmocore/src/sim; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 3:3:1 -no-undefined -o libosmosim.la -rpath /build/deps/install/stow/libosmocore/lib core.lo reader.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_hpsim.lo card_fs_tetra.lo reader_pcsc.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite ) libtool: install: /usr/bin/install -c .libs/libosmosim.so.2.1.3T /build/deps/install/stow/libosmocore/lib/libosmosim.so.2.1.3 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so.2 || { rm -f libosmosim.so.2 && ln -s libosmosim.so.2.1.3 libosmosim.so.2; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.2.1.3 libosmosim.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmosim.lai /build/deps/install/stow/libosmocore/lib/libosmosim.la libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src/sim' make[3]: Leaving directory '/build/deps/libosmocore/src/sim' Making install in usb make[3]: Entering directory '/build/deps/libosmocore/src/usb' CC osmo_libusb.lo CCLD libosmousb.la make[4]: Entering directory '/build/deps/libosmocore/src/usb' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmousb.la' libtool: install: (cd /build/deps/libosmocore/src/usb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 0:1:0 -no-undefined -o libosmousb.la -rpath /build/deps/install/stow/libosmocore/lib osmo_libusb.lo ../../src/core/libosmocore.la -ltalloc -lusb-1.0 ) libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.1T /build/deps/install/stow/libosmocore/lib/libosmousb.so.0.0.1 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.1 libosmousb.so.0; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.1 libosmousb.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmousb.lai /build/deps/install/stow/libosmocore/lib/libosmousb.la libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src/usb' make[3]: Leaving directory '/build/deps/libosmocore/src/usb' make[3]: Entering directory '/build/deps/libosmocore/src' make[4]: Entering directory '/build/deps/libosmocore/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmocore/src' make[3]: Leaving directory '/build/deps/libosmocore/src' make[2]: Leaving directory '/build/deps/libosmocore/src' Making install in utils make[2]: Entering directory '/build/deps/libosmocore/utils' make[3]: Entering directory '/build/deps/libosmocore/utils' CC osmo-arfcn.o CC osmo-auc-gen.o CC osmo-config-merge.o CC osmo-aka-verify.o CC osmo_sim_test-osmo-sim-test.o CC gsmtap-logsend.o CC osmo-ns-dummy.o CC osmo-ns-dummy-vty.o CCLD osmo-arfcn CCLD osmo-auc-gen CCLD osmo-config-merge CCLD osmo-gsmtap-logsend CCLD osmo-sim-test CCLD osmo-aka-verify CCLD osmo-ns-dummy make[4]: Entering directory '/build/deps/libosmocore/utils' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify osmo-gsmtap-logsend '/build/deps/install/stow/libosmocore/bin' libtool: install: /usr/bin/install -c .libs/osmo-arfcn /build/deps/install/stow/libosmocore/bin/osmo-arfcn libtool: install: /usr/bin/install -c .libs/osmo-auc-gen /build/deps/install/stow/libosmocore/bin/osmo-auc-gen libtool: install: /usr/bin/install -c .libs/osmo-config-merge /build/deps/install/stow/libosmocore/bin/osmo-config-merge libtool: install: /usr/bin/install -c .libs/osmo-aka-verify /build/deps/install/stow/libosmocore/bin/osmo-aka-verify libtool: install: /usr/bin/install -c .libs/osmo-gsmtap-logsend /build/deps/install/stow/libosmocore/bin/osmo-gsmtap-logsend make[4]: Leaving directory '/build/deps/libosmocore/utils' make[3]: Leaving directory '/build/deps/libosmocore/utils' make[2]: Leaving directory '/build/deps/libosmocore/utils' Making install in tapset make[2]: Entering directory '/build/deps/libosmocore/tapset' make[3]: Entering directory '/build/deps/libosmocore/tapset' make[3]: Nothing to be done for 'install-exec-am'. make install-data-hook make[4]: Entering directory '/build/deps/libosmocore/tapset' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore/tapset' make[3]: Leaving directory '/build/deps/libosmocore/tapset' make[2]: Leaving directory '/build/deps/libosmocore/tapset' Making install in tests make[2]: Entering directory '/build/deps/libosmocore/tests' GEN conv/gsm0503_test_vectors.c Generating test vectors... Generate 'xcch' test vector Generate 'tch_f24' test vector Generate 'tch_h24' test vector Generate 'tch_f48' test vector Generate 'tch_f96' test vector Generate 'tch_f144' test vector Generate 'rach' test vector Generate 'rach_ext' test vector Generate 'sch' test vector Generate 'cs2' test vector Generate 'cs3' test vector Generate 'cs2_np' test vector Generate 'cs3_np' test vector Generate 'tch_afs_12_2' test vector Generate 'tch_afs_10_2' test vector Generate 'tch_afs_7_95' test vector Generate 'tch_afs_7_4' test vector Generate 'tch_afs_6_7' test vector Generate 'tch_afs_5_9' test vector Generate 'tch_afs_5_15' test vector Generate 'tch_afs_4_75' test vector Generate 'tch_fr' test vector Generate 'tch_hr' test vector Generate 'tch_ahs_7_95' test vector Generate 'tch_ahs_7_4' test vector Generate 'tch_ahs_6_7' test vector Generate 'tch_ahs_5_9' test vector Generate 'tch_ahs_5_15' test vector Generate 'tch_ahs_4_75' test vector Generate 'tch_axs_sid_update' test vector Generate 'mcs1_dl_hdr' test vector Generate 'mcs1_ul_hdr' test vector Generate 'mcs1' test vector Generate 'mcs2' test vector Generate 'mcs3' test vector Generate 'mcs4' test vector Generate 'mcs5_dl_hdr' test vector Generate 'mcs5_ul_hdr' test vector Generate 'mcs5' test vector Generate 'mcs6' test vector Generate 'mcs7_dl_hdr' test vector Generate 'mcs7_ul_hdr' test vector Generate 'mcs7' test vector Generate 'mcs8' test vector Generate 'mcs9' test vector Generation complete. make install-am make[3]: Entering directory '/build/deps/libosmocore/tests' make[4]: Entering directory '/build/deps/libosmocore/tests' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmocore/tests' make[3]: Leaving directory '/build/deps/libosmocore/tests' make[2]: Leaving directory '/build/deps/libosmocore/tests' make[2]: Entering directory '/build/deps/libosmocore' make[3]: Entering directory '/build/deps/libosmocore' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/share/aclocal' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib/pkgconfig' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include' /usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc libosmoisdn.pc '/build/deps/install/stow/libosmocore/lib/pkgconfig' /usr/bin/install -c osmo-release.sh '/build/deps/install/stow/libosmocore/bin' /usr/bin/install -c -m 644 osmo-release.mk '/build/deps/install/stow/libosmocore/include' /usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '/build/deps/install/stow/libosmocore/share/aclocal' make install-data-hook make[4]: Entering directory '/build/deps/libosmocore' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore' make[3]: Leaving directory '/build/deps/libosmocore' make[2]: Leaving directory '/build/deps/libosmocore' make[1]: Leaving directory '/build/deps/libosmocore' + STOW_DIR=/build/deps/install/stow stow --restow libosmocore + osmo-build-dep.sh libosmo-netif =============================== libosmo-netif =============================== + mkdir -p /build/deps + cd /build/deps + osmo-deps.sh libosmo-netif + project=libosmo-netif + branch=master + git branch -a + grep -c remotes/origin/master$ + [ x1 != x0 ] + branch=origin/master + test -d libosmo-netif + osmo_git_clone_url libosmo-netif + echo https://gerrit.osmocom.org/libosmo-netif + git clone https://gerrit.osmocom.org/libosmo-netif libosmo-netif Cloning into 'libosmo-netif'... fatal: unable to access 'https://gerrit.osmocom.org/libosmo-netif/': The requested URL returned error: 500 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 29813 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications