May 2023 - jenkins-notifications

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #21755
by jenkins＠lists.osmocom.org 11 May '23

11 May '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.54 MB...] make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f abisip-find ipaccess-config ipaccess-proxy rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f abis_test test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f acc_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f bsc_test test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f codec_pref_test test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f gsm0408_test test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f handover_test test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f nanobts_omlattr_test test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f paging_test test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bsc_subscr_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build generated/.pdf_shrink_marker rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' make[1]: *** [Makefile:745: distcleancheck] Error 1 make: *** [Makefile:674: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 41180 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #21752
by jenkins＠lists.osmocom.org 11 May '23

11 May '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.51 MB...] make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f abisip-find ipaccess-config ipaccess-proxy test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f abis_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f acc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f bsc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f codec_pref_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f gsm0408_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f handover_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f nanobts_omlattr_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f paging_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bsc_subscr_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build generated/.pdf_shrink_marker rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:745: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' make: *** [Makefile:674: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3580857 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #21747
by jenkins＠lists.osmocom.org 10 May '23

10 May '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.50 MB...] make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f abisip-find ipaccess-config ipaccess-proxy rm -f *.tab.c test -z "" || rm -f test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f abis_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' rm -rf .libs _libs rm -f acc_test rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f bsc_test rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f codec_pref_test rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f gsm0408_test rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' rm -rf .libs _libs rm -f handover_test rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f nanobts_omlattr_test rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' rm -rf .libs _libs rm -f paging_test rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bsc_subscr_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build generated/.pdf_shrink_marker test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../doc" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 test . = "../.." || test -z "" || rm -f rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:745: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' make: *** [Makefile:674: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 506037 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #21745
by jenkins＠lists.osmocom.org 10 May '23

10 May '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.51 MB...] make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f abisip-find ipaccess-config ipaccess-proxy test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f abis_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f acc_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bsc_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f codec_pref_test test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f gsm0408_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f handover_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f nanobts_omlattr_test test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f paging_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f bsc_subscr_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build generated/.pdf_shrink_marker rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:745: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.10.0.162-ef4ce/_build/sub' make: *** [Makefile:674: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 4027362 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: ttcn3-bsc-test-vamos #712
by jenkins＠lists.osmocom.org 05 May '23

05 May '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-vamos/712/display/re…> Changes: ------------------------------------------ [...truncated 50.73 KB...] checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for libosmocore >= 1.8.0... yes checking for libosmovty >= 1.8.0... yes checking for libosmogsm >= 1.8.0... yes checking for libosmoctrl >= 1.8.0... yes checking for libosmocodec >= 1.8.0... yes checking for libosmocoding >= 1.8.0... yes checking for libosmoabis >= 1.4.0... yes checking for libosmotrau >= 1.4.0... yes checking for libosmo-netif >= 1.3.0... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no [91mPackage systemd was not found in the pkg-config search path. Perhaps you should add the directory containing `systemd.pc' to the PKG_CONFIG_PATH environment variable No package 'systemd' found [0mCFLAGS=" -std=gnu11" CPPFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/ber/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.6.0.110-2a60 > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/tmp/osmo-bts' Making install in include make[2]: Entering directory '/tmp/osmo-bts/include' Making install in osmo-bts make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Entering directory '/tmp/osmo-bts/include' make[4]: Entering directory '/tmp/osmo-bts/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include' make[3]: Leaving directory '/tmp/osmo-bts/include' make[2]: Leaving directory '/tmp/osmo-bts/include' Making install in src make[2]: Entering directory '/tmp/osmo-bts/src' Making install in common make[3]: Entering directory '/tmp/osmo-bts/src/common' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/common' CC gsm_data.o CC logging.o CC abis.o CC sysinfo.o CC abis_osmo.o CC oml.o CC bts.o CC osmux.o CC bts_trx.o CC bts_sm.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_channel_fsm.o CC nm_bb_transc_fsm.o CC nm_gprs_cell_fsm.o CC nm_gprs_nse_fsm.o CC nm_gprs_nsvc_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0m AR libl1sched.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0mmake[5]: Entering directory '/tmp/osmo-bts/src/common' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-bts/src/common' make[4]: Leaving directory '/tmp/osmo-bts/src/common' make[3]: Leaving directory '/tmp/osmo-bts/src/common' Making install in osmo-bts-virtual make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' CC main.o CC bts_model.o CC scheduler_virtbts.o CC virtualbts_vty.o CC l1_if.o CC osmo_mcast_sock.o CC virtual_um.o CCLD osmo-bts-virtual make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/usr/local/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-virtual /usr/local/bin/osmo-bts-virtual make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' Making install in osmo-bts-omldummy make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/usr/local/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-omldummy /usr/local/bin/osmo-bts-omldummy make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' Making install in osmo-bts-trx make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' CC main.o CC l1_if.o CC trx_if.o CC scheduler_trx.o CC sched_lchan_rach.o CC sched_lchan_fcch_sch.o CC sched_lchan_xcch.o CC sched_lchan_pdtch.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC trx_provision_fsm.o CC trx_vty.o CC amr_loop.o [91msched_lchan_tchh.c: In function 'rx_tchh_fn': sched_lchan_tchh.c:187:13: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function) 187 | if (rc == GSM_HR_BYTES_RTP_RFC5993) { /* only for valid *speech* frames */ | ^~~~~~~~~~~~~~~~~~~~~~~~ sched_lchan_tchh.c:187:13: note: each undeclared identifier is reported only once for each function it appears in [0m[91msched_lchan_tchf.c: In function 'tch_dl_dequeue': [0m[91msched_lchan_tchf.c:417:11: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function) 417 | len = GSM_HR_BYTES_RTP_RFC5993; | ^~~~~~~~~~~~~~~~~~~~~~~~ sched_lchan_tchf.c:417:11: note: each undeclared identifier is reported only once for each function it appears in [0m[91mmake[4]: *** [Makefile:529: sched_lchan_tchh.o] Error 1 make[4]: *** Waiting for unfinished jobs.... [0m[91mmake[4]: *** [Makefile:529: sched_lchan_tchf.o] Error 1 [0mmake[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' [91mmake[3]: *** [Makefile:649: install] Error 2 [0mmake[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' [91mmake[2]: *** [Makefile:391: install-recursive] Error 1 [0mmake[2]: Leaving directory '/tmp/osmo-bts/src' [91mmake[1]: *** [Makefile:446: install-recursive] Error 1 [0mmake[1]: Leaving directory '/tmp/osmo-bts' [91mmake: *** [Makefile:751: install] Error 2 [0mThe command '/bin/sh -c cd osmo-bts && git fetch && git checkout $OSMO_BTS_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-vamos/ws/osmo-bts-ma…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Jenkins build became unstable: ttcn3-gbproxy-test-fr #879
by jenkins＠lists.osmocom.org 05 May '23

05 May '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-fr/879/display/r…>

1 1

Build failed in Jenkins: ttcn3-bsc-test #2108
by jenkins＠lists.osmocom.org 05 May '23

05 May '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test/2108/display/redirect> Changes: ------------------------------------------ [...truncated 155.34 KB...] checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for libosmocore >= 1.8.0... yes checking for libosmovty >= 1.8.0... yes checking for libosmogsm >= 1.8.0... yes checking for libosmoctrl >= 1.8.0... yes checking for libosmocodec >= 1.8.0... yes checking for libosmocoding >= 1.8.0... yes checking for libosmoabis >= 1.4.0... yes checking for libosmotrau >= 1.4.0... yes checking for libosmo-netif >= 1.3.0... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no [91mPackage systemd was not found in the pkg-config search path. Perhaps you should add the directory containing `systemd.pc' to the PKG_CONFIG_PATH environment variable No package 'systemd' found [0mCFLAGS=" -std=gnu11" CPPFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/ber/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.6.0.110-2a60 > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/tmp/osmo-bts' Making install in include make[2]: Entering directory '/tmp/osmo-bts/include' Making install in osmo-bts make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Entering directory '/tmp/osmo-bts/include' make[4]: Entering directory '/tmp/osmo-bts/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include' make[3]: Leaving directory '/tmp/osmo-bts/include' make[2]: Leaving directory '/tmp/osmo-bts/include' Making install in src make[2]: Entering directory '/tmp/osmo-bts/src' Making install in common make[3]: Entering directory '/tmp/osmo-bts/src/common' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC bts.o CC osmux.o CC bts_sm.o CC rsl.o CC bts_trx.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_gprs_cell_fsm.o CC nm_gprs_nse_fsm.o CC nm_gprs_nsvc_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0m AR libl1sched.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0mmake[5]: Entering directory '/tmp/osmo-bts/src/common' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-bts/src/common' make[4]: Leaving directory '/tmp/osmo-bts/src/common' make[3]: Leaving directory '/tmp/osmo-bts/src/common' Making install in osmo-bts-virtual make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/usr/local/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-virtual /usr/local/bin/osmo-bts-virtual make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' Making install in osmo-bts-omldummy make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/usr/local/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-omldummy /usr/local/bin/osmo-bts-omldummy make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' Making install in osmo-bts-trx make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' CC trx_if.o CC l1_if.o CC main.o CC scheduler_trx.o CC sched_lchan_fcch_sch.o CC sched_lchan_xcch.o CC sched_lchan_pdtch.o CC sched_lchan_rach.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC trx_provision_fsm.o CC trx_vty.o CC amr_loop.o [91msched_lchan_tchf.c: In function 'tch_dl_dequeue': sched_lchan_tchf.c:417:11: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function) 417 | len = GSM_HR_BYTES_RTP_RFC5993; | ^~~~~~~~~~~~~~~~~~~~~~~~ sched_lchan_tchf.c:417:11: note: each undeclared identifier is reported only once for each function it appears in [0m[91mmake[4]: *** [Makefile:530: sched_lchan_tchf.o] Error 1 make[4]: *** Waiting for unfinished jobs.... [0m[91msched_lchan_tchh.c: In function 'rx_tchh_fn': sched_lchan_tchh.c:187:13: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function) 187 | if (rc == GSM_HR_BYTES_RTP_RFC5993) { /* only for valid *speech* frames */ | ^~~~~~~~~~~~~~~~~~~~~~~~ sched_lchan_tchh.c:187:13: note: each undeclared identifier is reported only once for each function it appears in [0m[91mmake[4]: *** [Makefile:529: sched_lchan_tchh.o] Error 1 [0mmake[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' [91mmake[3]: *** [Makefile:649: install] Error 2 [0mmake[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' [91mmake[2]: *** [Makefile:391: install-recursive] Error 1 [0mmake[2]: Leaving directory '/tmp/osmo-bts/src' [91mmake[1]: *** [Makefile:446: install-recursive] Error 1 [0mmake[1]: Leaving directory '/tmp/osmo-bts' [91mmake: *** [Makefile:751: install] Error 2 [0mThe command '/bin/sh -c cd osmo-bts && git fetch && git checkout $OSMO_BTS_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test/ws/osmo-bts-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: TTCN3-centos-bsc-test #1082
by jenkins＠lists.osmocom.org 05 May '23

05 May '23

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/1082/display/…> Changes: ------------------------------------------ [...truncated 152.35 KB...] checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... [91m./configure: line 6570: cmp: command not found [0m[91m./configure: line 6570: cmp: command not found [0m checking how to truncate binary pipes... /usr/bin/sed -e 4q [91m./configure: line 6747: /usr/bin/file: No such file or directory [0mchecking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... [91m./configure: line 8499: diff: command not found [0mno checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11" CPPFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/ber/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.6.0.110-2a60 > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/tmp/osmo-bts' Making install in include make[2]: Entering directory '/tmp/osmo-bts/include' Making install in osmo-bts make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Entering directory '/tmp/osmo-bts/include' make[4]: Entering directory '/tmp/osmo-bts/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include' make[3]: Leaving directory '/tmp/osmo-bts/include' make[2]: Leaving directory '/tmp/osmo-bts/include' Making install in src make[2]: Entering directory '/tmp/osmo-bts/src' Making install in common make[3]: Entering directory '/tmp/osmo-bts/src/common' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC oml.o CC abis_osmo.o CC osmux.o CC bts.o CC bts_sm.o CC bts_trx.o CC vty.o CC rsl.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC pcu_sock.o CC load_indication.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_gprs_cell_fsm.o CC nm_gprs_nse_fsm.o CC nm_gprs_nsvc_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a AR libl1sched.a make[5]: Entering directory '/tmp/osmo-bts/src/common' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-bts/src/common' make[4]: Leaving directory '/tmp/osmo-bts/src/common' make[3]: Leaving directory '/tmp/osmo-bts/src/common' Making install in osmo-bts-virtual make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' CC main.o CC bts_model.o CC l1_if.o CC virtualbts_vty.o CC scheduler_virtbts.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/usr/local/bin' /bin/sh ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-virtual /usr/local/bin/osmo-bts-virtual make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' Making install in osmo-bts-omldummy make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/usr/local/bin' /bin/sh ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-omldummy /usr/local/bin/osmo-bts-omldummy make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' Making install in osmo-bts-trx make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' CC trx_if.o CC main.o CC l1_if.o CC scheduler_trx.o CC sched_lchan_xcch.o CC sched_lchan_fcch_sch.o CC sched_lchan_rach.o CC sched_lchan_pdtch.o CC sched_lchan_tchh.o CC sched_lchan_tchf.o CC trx_vty.o CC trx_provision_fsm.o CC amr_loop.o [91msched_lchan_tchh.c: In function 'rx_tchh_fn': sched_lchan_tchh.c:187:13: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function); did you mean 'GSM_HR_BYTES'? if (rc == GSM_HR_BYTES_RTP_RFC5993) { /* only for valid *speech* frames */ ^~~~~~~~~~~~~~~~~~~~~~~~ GSM_HR_BYTES sched_lchan_tchh.c:187:13: note: each undeclared identifier is reported only once for each function it appears in [0m[91msched_lchan_tchf.c: In function 'tch_dl_dequeue': sched_lchan_tchf.c:417:11: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function); did you mean 'GSM_HR_BYTES'? len = GSM_HR_BYTES_RTP_RFC5993; ^~~~~~~~~~~~~~~~~~~~~~~~ GSM_HR_BYTES sched_lchan_tchf.c:417:11: note: each undeclared identifier is reported only once for each function it appears in [0m[91mmake[4]: *** [Makefile:528: sched_lchan_tchh.o] Error 1 make[4]: *** Waiting for unfinished jobs.... [0m[91mmake[4]: *** [Makefile:529: sched_lchan_tchf.o] Error 1 [0mmake[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' [91mmake[3]: *** [Makefile:648: install] Error 2 [0m[91mmake[2]: *** [Makefile:390: install-recursive] Error 1 [0mmake[2]: Leaving directory '/tmp/osmo-bts/src' [91mmake[1]: *** [Makefile:443: install-recursive] Error 1 [0mmake[1]: Leaving directory '/tmp/osmo-bts' [91mmake: *** [Makefile:742: install] Error 2 [0mThe command '/bin/sh -c cd osmo-bts && git fetch && git checkout $OSMO_BTS_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/ws/osmo-bts-m…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: ttcn3-bts-test #2012
by jenkins＠lists.osmocom.org 04 May '23

04 May '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/2012/display/redirect> Changes: ------------------------------------------ [...truncated 82.10 KB...] checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for libosmocore >= 1.8.0... yes checking for libosmovty >= 1.8.0... yes checking for libosmogsm >= 1.8.0... yes checking for libosmoctrl >= 1.8.0... yes checking for libosmocodec >= 1.8.0... yes checking for libosmocoding >= 1.8.0... yes checking for libosmoabis >= 1.4.0... yes checking for libosmotrau >= 1.4.0... yes checking for libosmo-netif >= 1.3.0... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no [91mPackage systemd was not found in the pkg-config search path. Perhaps you should add the directory containing `systemd.pc' to the PKG_CONFIG_PATH environment variable No package 'systemd' found [0mCFLAGS=" -std=gnu11" CPPFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/ber/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.6.0.110-2a60 > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/tmp/osmo-bts' Making install in include make[2]: Entering directory '/tmp/osmo-bts/include' Making install in osmo-bts make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Entering directory '/tmp/osmo-bts/include' make[4]: Entering directory '/tmp/osmo-bts/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include' make[3]: Leaving directory '/tmp/osmo-bts/include' make[2]: Leaving directory '/tmp/osmo-bts/include' Making install in src make[2]: Entering directory '/tmp/osmo-bts/src' Making install in common make[3]: Entering directory '/tmp/osmo-bts/src/common' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_sm.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_gprs_cell_fsm.o CC nm_gprs_nse_fsm.o CC nm_gprs_nsvc_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0m AR libl1sched.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0mmake[5]: Entering directory '/tmp/osmo-bts/src/common' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-bts/src/common' make[4]: Leaving directory '/tmp/osmo-bts/src/common' make[3]: Leaving directory '/tmp/osmo-bts/src/common' Making install in osmo-bts-virtual make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/usr/local/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-virtual /usr/local/bin/osmo-bts-virtual make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' Making install in osmo-bts-omldummy make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/usr/local/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/usr/local/bin' libtool: install: /usr/bin/install -c osmo-bts-omldummy /usr/local/bin/osmo-bts-omldummy make[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' make[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-omldummy' Making install in osmo-bts-trx make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/osmo-bts-trx' CC main.o CC l1_if.o CC trx_if.o CC scheduler_trx.o CC sched_lchan_fcch_sch.o CC sched_lchan_rach.o CC sched_lchan_xcch.o CC sched_lchan_pdtch.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC trx_provision_fsm.o CC trx_vty.o CC amr_loop.o [91msched_lchan_tchh.c: In function 'rx_tchh_fn': [0m[91msched_lchan_tchh.c:187:13: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function) 187 | if (rc == GSM_HR_BYTES_RTP_RFC5993) { /* only for valid *speech* frames */ | ^~~~~~~~~~~~~~~~~~~~~~~~ [0m[91msched_lchan_tchh.c:187:13: note: each undeclared identifier is reported only once for each function it appears in [0m[91msched_lchan_tchf.c: In function 'tch_dl_dequeue': [0m[91msched_lchan_tchf.c:417:11: error: 'GSM_HR_BYTES_RTP_RFC5993' undeclared (first use in this function) 417 | len = GSM_HR_BYTES_RTP_RFC5993; | ^~~~~~~~~~~~~~~~~~~~~~~~ [0m[91msched_lchan_tchf.c:417:11: note: each undeclared identifier is reported only once for each function it appears in [0m[91mmake[4]: *** [Makefile:530: sched_lchan_tchh.o] Error 1 make[4]: *** Waiting for unfinished jobs.... [0m[91mmake[4]: *** [Makefile:529: sched_lchan_tchf.o] Error 1 [0mmake[4]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' [91mmake[3]: *** [Makefile:649: install] Error 2 [0mmake[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-trx' make[2]: Leaving directory '/tmp/osmo-bts/src' [91mmake[2]: *** [Makefile:391: install-recursive] Error 1 [0m[91mmake[1]: *** [Makefile:446: install-recursive] Error 1 [0mmake[1]: Leaving directory '/tmp/osmo-bts' [91mmake: *** [Makefile:751: install] Error 2 [0mThe command '/bin/sh -c cd osmo-bts && git fetch && git checkout $OSMO_BTS_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/ws/osmo-bts-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 2

Build failed in Jenkins: registry-rebuild-upload-titan #1343
by jenkins＠lists.osmocom.org 04 May '23

04 May '23

See <https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/1343/…> Changes: ------------------------------------------ [...truncated 94.14 KB...] [0mcd titan.ProtocolModules.LLC_v7.1.0 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.LLC_v7.1.0 && git fetch cd titan.ProtocolModules.M3UA && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M3UA && git fetch cd titan.ProtocolModules.MobileL3_v13.4.0 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.MobileL3_v13… && git fetch origin/54219599037626c675610d3a44433d01af264fbb [91m+ git checkout -q -f 54219599037626c675610d3a44433d01af264fbb [0mb3687da06a0080e52d5d8cc558dbd86236780019 [91m+ git checkout -q -f origin/R.35.B-6-gb3687da [0morigin/R.7.B [91m+ git checkout -q -f R.7.B [0mcd titan.ProtocolModules.SMPP && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SMPP && git fetch cd titan.ProtocolModules.TCP && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.TCP && git fetch origin/ffd939595a08da1b8c8176aaa1f8578bfe02a912 [91m+ git checkout -q -f ffd939595a08da1b8c8176aaa1f8578bfe02a912 [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.L2TP.git/ [0m654c446e18e1f98fa9a9ff7f364923f8e8460d37 [91m+ git checkout -q -f origin/R.2.A-5-g654c446 [0mcd titan.ProtocolModules.UDP && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.UDP && git fetch cd titan.ProtocolModules.RTP && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.RTP && git fetch cd titan.ProtocolModules.M2PA && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M2PA && git fetch origin/e49d9fb9f7de637b4bf4803dc6b6e911a8661640 origin/46f4d9b6e1e3c794294a92588401a81e4881dd27 [91m+ git checkout -q -f e49d9fb9f7de637b4bf4803dc6b6e911a8661640 [0m[91m+ [0m[91mgit checkout -q -f 46f4d9b6e1e3c794294a92588401a81e4881dd27 [0mcd titan.ProtocolModules.ROSE && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ROSE && git fetch cd titan.ProtocolModules.SCTP && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SCTP && git fetch cd titan.ProtocolModules.SDP && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SDP && git fetch cd titan.ProtocolModules.ISUP_Q.762 && git fetch && if git rev-parse "origin/R.8.A-5-g42d428b" 2>/dev/null; then set -x && git checkout -q -f "origin/R.8.A-5-g42d428b"; else set -x && git checkout -q -f "R.8.A-5-g42d428b"; fi cd titan.ProtocolModules.JSON_v07_2006 && git fetch && if git rev-parse "origin/R.1.A" 2>/dev/null; then set -x && git checkout -q -f "origin/R.1.A"; else set -x && git checkout -q -f "R.1.A"; fi origin/1be86705f39ae38f3c04b2109806ee20d25e91d0 [91m+ git checkout -q -f 1be86705f39ae38f3c04b2109806ee20d25e91d0 [0mcd titan.ProtocolModules.SUA && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SUA && git fetch cd titan.ProtocolModules.L2TP && git fetch && if git rev-parse "origin/17e76d3662bd0bb815158e8a9de1ec413f21b530" 2>/dev/null; then set -x && git checkout -q -f "origin/17e76d3662bd0bb815158e8a9de1ec413f21b530"; else set -x && git checkout -q -f "17e76d3662bd0bb815158e8a9de1ec413f21b530"; fi cd titan.ProtocolModules.NAS_EPS_15.2.0.1 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.NAS_EPS_15.2… && git fetch [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M3UA.git/ warning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.MobileL3_v13… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.LLC_v7.1.0.g… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.TCP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SMPP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.UDP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SCTP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SDP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.RTP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M2PA.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ROSE.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ISUP_Q.762.g… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.JSON_v07_200… [0mcd titan.ProtocolModules.MobileL3_v13.4.0 && git fetch && if git rev-parse "origin/badbad680df216b3211260d56b14734eeb2c9028" 2>/dev/null; then set -x && git checkout -q -f "origin/badbad680df216b3211260d56b14734eeb2c9028"; else set -x && git checkout -q -f "badbad680df216b3211260d56b14734eeb2c9028"; fi cd titan.ProtocolModules.M3UA && git fetch && if git rev-parse "origin/c496d298876fed55c2b730278b7ee77982555563" 2>/dev/null; then set -x && git checkout -q -f "origin/c496d298876fed55c2b730278b7ee77982555563"; else set -x && git checkout -q -f "c496d298876fed55c2b730278b7ee77982555563"; fi cd titan.ProtocolModules.LLC_v7.1.0 && git fetch && if git rev-parse "origin/09817f113255d7fb56f1d45d3dd629a093d9248d" 2>/dev/null; then set -x && git checkout -q -f "origin/09817f113255d7fb56f1d45d3dd629a093d9248d"; else set -x && git checkout -q -f "09817f113255d7fb56f1d45d3dd629a093d9248d"; fi cd titan.ProtocolModules.TCP && git fetch && if git rev-parse "origin/R.3.A-5-g39e5f45" 2>/dev/null; then set -x && git checkout -q -f "origin/R.3.A-5-g39e5f45"; else set -x && git checkout -q -f "R.3.A-5-g39e5f45"; fi [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SUA.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.L2TP.git/ [0mcd titan.ProtocolModules.SMPP && git fetch && if git rev-parse "origin/R.2.A-5-gf2c9017" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-5-gf2c9017"; else set -x && git checkout -q -f "R.2.A-5-gf2c9017"; fi [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.NAS_EPS_15.2… [0mcd titan.ProtocolModules.UDP && git fetch && if git rev-parse "origin/R.4.A-5-geea8aa3" 2>/dev/null; then set -x && git checkout -q -f "origin/R.4.A-5-geea8aa3"; else set -x && git checkout -q -f "R.4.A-5-geea8aa3"; fi cd titan.ProtocolModules.RTP && git fetch && if git rev-parse "origin/R.5.A-4-g83ee83a" 2>/dev/null; then set -x && git checkout -q -f "origin/R.5.A-4-g83ee83a"; else set -x && git checkout -q -f "R.5.A-4-g83ee83a"; fi cd titan.ProtocolModules.M2PA && git fetch && if git rev-parse "origin/R.2.A-5-ga75b589" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-5-ga75b589"; else set -x && git checkout -q -f "R.2.A-5-ga75b589"; fi cd titan.ProtocolModules.SCTP && git fetch && if git rev-parse "origin/R.2.A-5-g556ef3f" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-5-g556ef3f"; else set -x && git checkout -q -f "R.2.A-5-g556ef3f"; fi cd titan.ProtocolModules.SDP && git fetch && if git rev-parse "origin/R.14.A-6-g7f00ea0" 2>/dev/null; then set -x && git checkout -q -f "origin/R.14.A-6-g7f00ea0"; else set -x && git checkout -q -f "R.14.A-6-g7f00ea0"; fi 42d428b44462fb5b44bc773b72571d28a1e09910 [91m+ git checkout -q -f origin/R.8.A-5-g42d428b [0morigin/R.1.A [91m+ git checkout -q -f R.1.A [0mcd titan.ProtocolModules.ROSE && git fetch && if git rev-parse "origin/R.1.C-5-g0f6774c" 2>/dev/null; then set -x && git checkout -q -f "origin/R.1.C-5-g0f6774c"; else set -x && git checkout -q -f "R.1.C-5-g0f6774c"; fi cd titan.ProtocolModules.NS_v7.3.0 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.NS_v7.3.0 && git fetch cd titan.ProtocolModules.SGsAP_13.2.0 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SGsAP_13.2.0 && git fetch cd titan.ProtocolModules.SUA && git fetch && if git rev-parse "origin/R.5.A-5-gcf1137a" 2>/dev/null; then set -x && git checkout -q -f "origin/R.5.A-5-gcf1137a"; else set -x && git checkout -q -f "R.5.A-5-gcf1137a"; fi origin/17e76d3662bd0bb815158e8a9de1ec413f21b530 [91m+ git checkout -q -f 17e76d3662bd0bb815158e8a9de1ec413f21b530 [0mcd titan.ProtocolModules.NAS_EPS_15.2.0.1 && git fetch && if git rev-parse "origin/R.1.A-2-g2ba853c" 2>/dev/null; then set -x && git checkout -q -f "origin/R.1.A-2-g2ba853c"; else set -x && git checkout -q -f "R.1.A-2-g2ba853c"; fi cd titan.ProtocolModules.SNDCP_v7.0.0 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SNDCP_v7.0.0 && git fetch [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M3UA.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.MobileL3_v13… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.TCP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.LLC_v7.1.0.g… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.UDP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SMPP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.RTP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M2PA.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SDP.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SCTP.git/ [0morigin/c496d298876fed55c2b730278b7ee77982555563 [91m+ git checkout -q -f c496d298876fed55c2b730278b7ee77982555563 [0morigin/badbad680df216b3211260d56b14734eeb2c9028 [91m+ git checkout -q -f badbad680df216b3211260d56b14734eeb2c9028 [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SUA.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.NAS_EPS_15.2… [0mcd titan.ProtocolModules.PFCP_v15.1.0 && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.PFCP_v15.1.0 && git fetch cd titan.TestPorts.Common_Components.Socket-API && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.Common_Components.… && git fetch 39e5f45f1ad1055ab7af373338b0d0365bf9814e [91m+ git checkout -q -f origin/R.3.A-5-g39e5f45 [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.NS_v7.3.0.gi… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ROSE.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SGsAP_13.2.0… [0morigin/09817f113255d7fb56f1d45d3dd629a093d9248d [91m+ git checkout -q -f 09817f113255d7fb56f1d45d3dd629a093d9248d [0mcd titan.TestPorts.Common_Components.Abstract_Socket && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.Common_Components.… && git fetch cd titan.TestPorts.HTTPmsg && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.HTTPmsg && git fetch [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SNDCP_v7.0.0… [0mf2c901795e2fd42f2d9fdd437210d3078e20557e [91m+ git checkout -q -f origin/R.2.A-5-gf2c9017 [0meea8aa3b7f525e5d3d422f3734f9e2e77c243ccb [91m+ git checkout -q -f origin/R.4.A-5-geea8aa3 [0mcd titan.TestPorts.IPL4asp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.IPL4asp && git fetch cd titan.TestPorts.LANL2asp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.LANL2asp && git fetch 83ee83aa58ec30a5af420972662acb562c2e839f [91m+ git checkout -q -f origin/R.5.A-4-g83ee83a [0ma75b58983f46814974470d1089387d3f351cd60b [91m+ git checkout -q -f origin/R.2.A-5-ga75b589 [0mcd titan.TestPorts.PCAPasp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.PCAPasp && git fetch cd titan.TestPorts.PIPEasp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.PIPEasp && git fetch 7f00ea0fa4d07fa2bbf6d99dd41180a377e8e4bd 556ef3fdae2e42cdefc1ca60e0bc155676cfc47e [91m+ git checkout+ -q -f origin/R.14.A-6-g7f00ea0git checkout -q -f origin/R.2.A-5-g556ef3f [0mcd titan.TestPorts.SIPmsg && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.SIPmsg && git fetch 2ba853c7d197f7f39d97b76fca4726a7143fb4ad [91m+ git checkout -q -f origin/R.1.A-2-g2ba853c [0mcd titan.TestPorts.TELNETasp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TELNETasp && git fetch cd titan.TestPorts.TCPasp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TCPasp && git fetch cd titan.ProtocolModules.NS_v7.3.0 && git fetch && if git rev-parse "origin/R.2.A-6-gf73f195" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-6-gf73f195"; else set -x && git checkout -q -f "R.2.A-6-gf73f195"; fi cd titan.ProtocolModules.SGsAP_13.2.0 && git fetch && if git rev-parse "origin/R.1.B-3-g5ccaeab" 2>/dev/null; then set -x && git checkout -q -f "origin/R.1.B-3-g5ccaeab"; else set -x && git checkout -q -f "R.1.B-3-g5ccaeab"; fi cf1137ac84627f85fc97c7fcdbd7841fb0441e31 [91m+ git checkout -q -f origin/R.5.A-5-gcf1137a [0m0f6774c6d146bf03d5e222d33bd911f7981a1b3c [91m+ [0m[91mgit checkout[0m[91m -q -f[0m[91m origin/R.1.C-5-g0f6774c[0m[91m [0mcd titan.TestPorts.UDPasp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UDPasp && git fetch cd titan.TestPorts.UNIX_DOMAIN_SOCKETasp && git remote set-url origin https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UNIX_DOMAIN_SOCKET… && git fetch cd titan.ProtocolModules.SNDCP_v7.0.0 && git fetch && if git rev-parse "origin/R.2.A-5-gd0f0ce6" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-5-gd0f0ce6"; else set -x && git checkout -q -f "R.2.A-5-gd0f0ce6"; fi [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.PFCP_v15.1.0… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.Common_Components.… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.Common_Components.… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.IPL4asp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.HTTPmsg.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.LANL2asp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.PIPEasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.PCAPasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TCPasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.SIPmsg.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.NS_v7.3.0.gi… [0mcd titan.TestPorts.Common_Components.Socket-API && git fetch && if git rev-parse "origin/R.6.A-6-gf4380d0" 2>/dev/null; then set -x && git checkout -q -f "origin/R.6.A-6-gf4380d0"; else set -x && git checkout -q -f "R.6.A-6-gf4380d0"; fi cd titan.TestPorts.Common_Components.Abstract_Socket && git fetch && if git rev-parse "origin/R.9.B-4-gbd41994" 2>/dev/null; then set -x && git checkout -q -f "origin/R.9.B-4-gbd41994"; else set -x && git checkout -q -f "R.9.B-4-gbd41994"; fi cd titan.ProtocolModules.PFCP_v15.1.0 && git fetch && if git rev-parse "origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18" 2>/dev/null; then set -x && git checkout -q -f "origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18"; else set -x && git checkout -q -f "d550ad9ddb6f9c823c9a555254cd76cf0e738d18"; fi [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UDPasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TELNETasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SNDCP_v7.0.0… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.SGsAP_13.2.0… [0mcd titan.TestPorts.IPL4asp && git fetch && if git rev-parse "origin/R.30.E-7-g029bccb" 2>/dev/null; then set -x && git checkout -q -f "origin/R.30.E-7-g029bccb"; else set -x && git checkout -q -f "R.30.E-7-g029bccb"; fi cd titan.TestPorts.HTTPmsg && git fetch && if git rev-parse "origin/R.9.B-4-g9a0dfde" 2>/dev/null; then set -x && git checkout -q -f "origin/R.9.B-4-g9a0dfde"; else set -x && git checkout -q -f "R.9.B-4-g9a0dfde"; fi [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UNIX_DOMAIN_SOCKET… [0mcd titan.TestPorts.PIPEasp && git fetch && if git rev-parse "origin/R.7.D-3-g8b01154" 2>/dev/null; then set -x && git checkout -q -f "origin/R.7.D-3-g8b01154"; else set -x && git checkout -q -f "R.7.D-3-g8b01154"; fi cd titan.TestPorts.LANL2asp && git fetch && if git rev-parse "origin/R.8.C-3-gb07c265" 2>/dev/null; then set -x && git checkout -q -f "origin/R.8.C-3-gb07c265"; else set -x && git checkout -q -f "R.8.C-3-gb07c265"; fi cd titan.TestPorts.SIPmsg && git fetch && if git rev-parse "origin/R.15.A-1-ge4f9dd0" 2>/dev/null; then set -x && git checkout -q -f "origin/R.15.A-1-ge4f9dd0"; else set -x && git checkout -q -f "R.15.A-1-ge4f9dd0"; fi cd titan.TestPorts.PCAPasp && git fetch && if git rev-parse "origin/R.8.A-3-g9ad320f" 2>/dev/null; then set -x && git checkout -q -f "origin/R.8.A-3-g9ad320f"; else set -x && git checkout -q -f "R.8.A-3-g9ad320f"; fi cd titan.TestPorts.TCPasp && git fetch && if git rev-parse "origin/R.9.A-5-g2c91bc6" 2>/dev/null; then set -x && git checkout -q -f "origin/R.9.A-5-g2c91bc6"; else set -x && git checkout -q -f "R.9.A-5-g2c91bc6"; fi f73f1952ae180145465ba4b17f197c502d31d1ce [91m+ git checkout -q -f origin/R.2.A-6-gf73f195 [0mcd titan.TestPorts.SCTPasp && git remote set-url origin https://github.com/osmocom/titan.TestPorts.SCTPasp && git fetch cd titan.TestPorts.TELNETasp && git fetch && if git rev-parse "origin/873fe539642542cd9a901c208f1ec11c6d2f5387" 2>/dev/null; then set -x && git checkout -q -f "origin/873fe539642542cd9a901c208f1ec11c6d2f5387"; else set -x && git checkout -q -f "873fe539642542cd9a901c208f1ec11c6d2f5387"; fi cd titan.TestPorts.UDPasp && git fetch && if git rev-parse "origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c" 2>/dev/null; then set -x && git checkout -q -f "origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c"; else set -x && git checkout -q -f "54176e95850654e5e8b0ffa2f1b5f35c412b949c"; fi d0f0ce6c06f91922c5fdf6c56b9b99a3472ee775 [91m+ git checkout -q -f origin/R.2.A-5-gd0f0ce6 [0mcd titan.TestPorts.MTP3asp && git remote set-url origin https://github.com/osmocom/titan.TestPorts.MTP3asp && git fetch cd titan.TestPorts.UNIX_DOMAIN_SOCKETasp && git fetch && if git rev-parse "origin/R.2.A-13-gd34ab71" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-13-gd34ab71"; else set -x && git checkout -q -f "R.2.A-13-gd34ab71"; fi 5ccaeab7b3093e2bd8e88eee73c8362d1a2e4f32 [91m+ git checkout -q -f origin/R.1.B-3-g5ccaeab [0mcd titan.ProtocolEmulations.SCCP && git remote set-url origin https://github.com/osmocom/titan.ProtocolEmulations.SCCP && git fetch [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.Common_Components.… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.Common_Components.… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.IPL4asp.git/ warning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.PFCP_v15.1.0… [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.HTTPmsg.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.PIPEasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.PCAPasp.git/ [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.LANL2asp.git/ [0mf4380d0dabc61a482a647e5caa66fb7f4b26b86a [91m+ git checkout -q -f origin/R.6.A-6-gf4380d0 [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TCPasp.git/ [0mcd titan.ProtocolModules.BSSGP_v13.0.0 && git remote set-url origin https://github.com/osmocom/titan.ProtocolModules.BSSGP_v13.0.0 && git fetch [91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TELNETasp.git/ warning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.SIPmsg.git/ [0mbd41994ab31af385c0b87a8074bf9f768c28c514 [91m+ git checkout -q -f origin/R.9.B-4-gbd41994 [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UNIX_DOMAIN_SOCKET… [0mcd titan.ProtocolModules.BSSMAP && git remote set-url origin https://gerrit.osmocom.org/titan.ProtocolModules.BSSMAP && git fetch 9a0dfdecfd33cf083890aa537015de718f960642 [91m+ git checkout -q -f origin/R.9.B-4-g9a0dfde [0m[91mwarning: redirecting to https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UDPasp.git/ [0mcd osmo-uecups && git remote set-url origin https://gerrit.osmocom.org/osmo-uecups && git fetch origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18 [91m+ git checkout -q -f d550ad9ddb6f9c823c9a555254cd76cf0e738d18 [0m029bccbdfcdf865f59123e8ca3f550c1fe4de5a8 [91m+ git checkout -q -f origin/R.30.E-7-g029bccb [0mcd titan.ProtocolModules.MAP && git remote set-url origin https://gitea.osmocom.org/ttcn3/titan.ProtocolModules.MAP && git fetch cd titan.TestPorts.USB && git remote set-url origin https://gitea.osmocom.org/ttcn3/titan.TestPorts.USB && git fetch 8b01154b10a1c5b04dd0fb7f6e0ac84aed7f78af [91m+ git checkout -q -f origin/R.7.D-3-g8b01154 [0m9ad320fb679f8bf7a826442fad3aad5d75c6571b [91m+ git checkout -q -f origin/R.8.A-3-g9ad320f [0mcd titan.TestPorts.AF_PACKET && git remote set-url origin https://gitea.osmocom.org/ttcn3/titan.TestPorts.AF_PACKET && git fetch 2c91bc600ec6fa2fcf0bb353a58ca05c1dd9b9b8 [91m+ git checkout -q -f origin/R.9.A-5-g2c91bc6 [0mb07c265526573250e693d430413bc07f9245d81c [91m+ git checkout -q -f origin/R.8.C-3-gb07c265 [0morigin/873fe539642542cd9a901c208f1ec11c6d2f5387 [91m+ git checkout -q -f 873fe539642542cd9a901c208f1ec11c6d2f5387 [0me4f9dd056b4103b4f298eb3201d7e18df909886f [91m+ git checkout -q -f origin/R.15.A-1-ge4f9dd0 [0md34ab71f36fc08c9a6dc8c4a8d34fc307c8a39aa [91m+ git checkout -q -f origin/R.2.A-13-gd34ab71 [0mcd titan.ProtocolModules.BSSMAP && git fetch && if git rev-parse "origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772" 2>/dev/null; then set -x && git checkout -q -f "origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772"; else set -x && git checkout -q -f "24f967b2f77bfdd2e6eabf1e82fa76239095f772"; fi cd osmo-uecups && git fetch && if git rev-parse "origin/8362efef7c6fa341eb947a75786878e0685767b7" 2>/dev/null; then set -x && git checkout -q -f "origin/8362efef7c6fa341eb947a75786878e0685767b7"; else set -x && git checkout -q -f "8362efef7c6fa341eb947a75786878e0685767b7"; fi cd titan.ProtocolModules.MAP && git fetch && if git rev-parse "origin/R.2.A-1-g79c6a3d" 2>/dev/null; then set -x && git checkout -q -f "origin/R.2.A-1-g79c6a3d"; else set -x && git checkout -q -f "R.2.A-1-g79c6a3d"; fi origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c [91m+ git checkout -q -f 54176e95850654e5e8b0ffa2f1b5f35c412b949c [0mcd titan.TestPorts.USB && git fetch && if git rev-parse "origin/a9470fdc99c82fbf988f4508c3161118c9106e28" 2>/dev/null; then set -x && git checkout -q -f "origin/a9470fdc99c82fbf988f4508c3161118c9106e28"; else set -x && git checkout -q -f "a9470fdc99c82fbf988f4508c3161118c9106e28"; fi cd titan.TestPorts.AF_PACKET && git fetch && if git rev-parse "origin/0.1-5-g89ebea6" 2>/dev/null; then set -x && git checkout -q -f "origin/0.1-5-g89ebea6"; else set -x && git checkout -q -f "0.1-5-g89ebea6"; fi origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772 [91m+ git checkout -q -f 24f967b2f77bfdd2e6eabf1e82fa76239095f772 [0m[91mfatal: reference is not a tree: 24f967b2f77bfdd2e6eabf1e82fa76239095f772 [0m[91mmake[1]: *** [Makefile:197: titan.ProtocolModules.BSSMAP/update] Error 128 make[1]: *** Waiting for unfinished jobs.... [0morigin/8362efef7c6fa341eb947a75786878e0685767b7 [91m+ git checkout -q -f 8362efef7c6fa341eb947a75786878e0685767b7 [0m79c6a3db8dcf25d39023b2b3bec9928f63482ad3 [91m+ git checkout -q -f origin/R.2.A-1-g79c6a3d [0morigin/a9470fdc99c82fbf988f4508c3161118c9106e28 [91m+ git checkout -q -f a9470fdc99c82fbf988f4508c3161118c9106e28 [0m89ebea61e8de46c3df0a1549bf8dd49505ddbcd5 [91m+ git checkout -q -f origin/0.1-5-g89ebea6 [0mcd titan.TestPorts.SCTPasp && git fetch && if git rev-parse "origin/R.11.A-8-g2e911c3" 2>/dev/null; then set -x && git checkout -q -f "origin/R.11.A-8-g2e911c3"; else set -x && git checkout -q -f "R.11.A-8-g2e911c3"; fi cd titan.ProtocolEmulations.SCCP && git fetch && if git rev-parse "origin/17a894fc6620a0df11d0d98c897fb66168276b16" 2>/dev/null; then set -x && git checkout -q -f "origin/17a894fc6620a0df11d0d98c897fb66168276b16"; else set -x && git checkout -q -f "17a894fc6620a0df11d0d98c897fb66168276b16"; fi cd titan.TestPorts.MTP3asp && git fetch && if git rev-parse "origin/1cecdad6f3641a5f19b3833703bff6e5005eff11" 2>/dev/null; then set -x && git checkout -q -f "origin/1cecdad6f3641a5f19b3833703bff6e5005eff11"; else set -x && git checkout -q -f "1cecdad6f3641a5f19b3833703bff6e5005eff11"; fi cd titan.ProtocolModules.BSSGP_v13.0.0 && git fetch && if git rev-parse "origin/e97d92a8b66bec399babea52f593771b76cb175a" 2>/dev/null; then set -x && git checkout -q -f "origin/e97d92a8b66bec399babea52f593771b76cb175a"; else set -x && git checkout -q -f "e97d92a8b66bec399babea52f593771b76cb175a"; fi 2e911c3f2cec63694ccae75a28909c9cefa03f3d [91m+ git checkout -q -f origin/R.11.A-8-g2e911c3 [0morigin/17a894fc6620a0df11d0d98c897fb66168276b16 [91m+ git checkout -q -f 17a894fc6620a0df11d0d98c897fb66168276b16 [0morigin/1cecdad6f3641a5f19b3833703bff6e5005eff11 [91m+ git checkout -q -f 1cecdad6f3641a5f19b3833703bff6e5005eff11 [0morigin/e97d92a8b66bec399babea52f593771b76cb175a [91m+ git checkout -q -f e97d92a8b66bec399babea52f593771b76cb175a [0mmake[1]: Leaving directory '/osmo-ttcn3-hacks/deps' [91mmake: *** [Makefile:70: deps] Error 2 [0mmake: Leaving directory '/osmo-ttcn3-hacks' The command '/bin/sh -c git clone https://gerrit.osmocom.org/osmo-ttcn3-hacks && make -j8 -C /osmo-ttcn3-hacks deps' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/ws/de…'> Build step 'Execute shell' marked build as failure

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications May 2023