November 2022 - jenkins-notifications

Build failed in Jenkins: master-osmo-trx » --with-neon,0,a3=default,a4=default,rpi4-raspbian11 #4760
by jenkins＠lists.osmocom.org 07 Nov '22

07 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> Changes: ------------------------------------------ [...truncated 100.36 KB...] checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether byte ordering is bigendian... no checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODING... yes checking boost/config.hpp usability... yes checking boost/config.hpp presence... yes checking for boost/config.hpp... yes checking for USRP... yes checking for LMS... yes checking for UHD... yes checking for UHD... yes checking whether gcc has __builtin_cpu_supports built-in... no configure: WARNING: Runtime SIMD detection will be disabled checking whether gcc has __sync_fetch_and_and built-in... yes checking whether gcc has __sync_or_and_fetch built-in... yes checking for LIBUSB... yes checking for FFTWF... yes CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CXXFLAGS="-g -O2" LDFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating CommonLibs/Makefile config.status: creating GSM/Makefile config.status: creating Transceiver52M/Makefile config.status: creating Transceiver52M/arch/Makefile config.status: creating Transceiver52M/arch/common/Makefile config.status: creating Transceiver52M/arch/arm/Makefile config.status: creating Transceiver52M/arch/x86/Makefile config.status: creating Transceiver52M/device/Makefile config.status: creating Transceiver52M/device/common/Makefile config.status: creating Transceiver52M/device/uhd/Makefile config.status: creating Transceiver52M/device/usrp1/Makefile config.status: creating Transceiver52M/device/lms/Makefile config.status: creating Transceiver52M/device/ipc/Makefile config.status: creating tests/Makefile config.status: creating tests/CommonLibs/Makefile config.status: creating tests/Transceiver52M/Makefile config.status: creating utils/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/osmo-trx.spec config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in CommonLibs make[2]: Entering directory '/build/CommonLibs' CXX LinkedLists.lo CXX Threads.lo CXX Timeval.lo CXX BitVector.lo CXX Logger.lo CXX Utils.lo CXX trx_rate_ctr.lo CC trx_vty.lo CC debug.lo CXXLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/CommonLibs' Making all in GSM make[2]: Entering directory '/build/GSM' CXX GSMCommon.lo CXXLD libGSM.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/GSM' Making all in Transceiver52M make[2]: Entering directory '/build/Transceiver52M' Making all in arch make[3]: Entering directory '/build/Transceiver52M/arch' Making all in common make[4]: Entering directory '/build/Transceiver52M/arch/common' CC convert_base.lo CC convolve_base.lo CC fft.lo CCLD libarch_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/common' Making all in arm make[4]: Entering directory '/build/Transceiver52M/arch/arm' CC convert.lo CPPAS convert_neon.lo CC convolve.lo CPPAS convolve_neon.lo CC scale.lo CPPAS scale_neon.lo CC mult.lo CPPAS mult_neon.lo CCLD libarch.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/arm' make[4]: Entering directory '/build/Transceiver52M/arch' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/arch' make[3]: Leaving directory '/build/Transceiver52M/arch' Making all in device make[3]: Entering directory '/build/Transceiver52M/device' Making all in common make[4]: Entering directory '/build/Transceiver52M/device/common' CXX smpl_buf.lo CXXLD libdevice_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/common' Making all in ipc make[4]: Entering directory '/build/Transceiver52M/device/ipc' echo "#include \"../uhd/UHDDevice.cpp\"" >uhddev_ipc.cpp L/build/deps/install/stow/libosmocore/lib -losmocore -ltalloc \ /bin/bash: L/build/deps/install/stow/libosmocore/lib: No such file or directory make[4]: [Makefile:966: uhddev_ipc.cpp] Error 127 (ignored) make all-am make[5]: Entering directory '/build/Transceiver52M/device/ipc' CC ipc_driver_test-ipc-driver-test.o CXX ipc_driver_test-uhdwrap.o CC ipc_driver_test-ipc_shm.o CC ipc_driver_test-ipc_chan.o CC ipc_driver_test-ipc_sock.o CXX ipc_driver_test-uhddev_ipc.o CC shm.lo CXX libdevice_la-IPCDevice.lo CC ipc_shm.lo CC ipc_chan.lo CC ipc_sock.lo In file included from /usr/include/c++/8/map:60, from ../uhd/UHDDevice.cpp:26, from uhddev_ipc.cpp:1: /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, int, int>; _Val = std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, int, int> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, int, int>, std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >, std::less<std::tuple<uhd_dev_type, int, int> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >’} changed in GCC 7.1 _Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>:: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, gsm_band>; _Val = std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, gsm_band> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, gsm_band>, std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >, std::less<std::tuple<uhd_dev_type, gsm_band> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >’} changed in GCC 7.1 CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') CXXLD ipc-driver-test make[5]: Leaving directory '/build/Transceiver52M/device/ipc' make[4]: Leaving directory '/build/Transceiver52M/device/ipc' Making all in usrp1 make[4]: Entering directory '/build/Transceiver52M/device/usrp1' CXX USRPDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/usrp1' Making all in uhd make[4]: Entering directory '/build/Transceiver52M/device/uhd' CXX UHDDevice.lo In file included from /usr/include/c++/8/map:60, from UHDDevice.cpp:26: /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, int, int>; _Val = std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, int, int> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, int, int>, std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >, std::less<std::tuple<uhd_dev_type, int, int> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >’} changed in GCC 7.1 _Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>:: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, gsm_band>; _Val = std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, gsm_band> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, gsm_band>, std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >, std::less<std::tuple<uhd_dev_type, gsm_band> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >’} changed in GCC 7.1 CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/uhd' Making all in lms make[4]: Entering directory '/build/Transceiver52M/device/lms' CXX LMSDevice.lo In file included from /usr/include/c++/8/map:60, from LMSDevice.cpp:24: /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = lms_dev_type; _Val = std::pair<const lms_dev_type, dev_desc>; _KeyOfValue = std::_Select1st<std::pair<const lms_dev_type, dev_desc> >; _Compare = std::less<lms_dev_type>; _Alloc = std::allocator<std::pair<const lms_dev_type, dev_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<lms_dev_type, std::pair<const lms_dev_type, dev_desc>, std::_Select1st<std::pair<const lms_dev_type, dev_desc> >, std::less<lms_dev_type>, std::allocator<std::pair<const lms_dev_type, dev_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const lms_dev_type, dev_desc> >’} changed in GCC 7.1 _Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>:: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<lms_dev_type, gsm_band>; _Val = std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >; _Compare = std::less<std::tuple<lms_dev_type, gsm_band> >; _Alloc = std::allocator<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<lms_dev_type, gsm_band>, std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc>, std::_Select1st<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >, std::less<std::tuple<lms_dev_type, gsm_band> >, std::allocator<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >’} changed in GCC 7.1 CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/lms' make[4]: Entering directory '/build/Transceiver52M/device' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/device' make[3]: Leaving directory '/build/Transceiver52M/device' make[3]: Entering directory '/build/Transceiver52M' CXX radioInterface.lo CXX osmo_trx_uhd-osmo-trx.o CXX radioVector.lo CXX radioClock.lo In file included from osmo-trx.cpp:45: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:10:32: error: option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [-Werror=pragmas] #pragma GCC diagnostic ignored "-Wstrict-prototypes" ^~~~~~~~~~~~~~~~~~~~~ CXX radioBuffer.lo CXX sigProcLib.lo CXX signalVector.lo CXX Transceiver.lo cc1plus: all warnings being treated as errors CXX ChannelizerBase.lo make[3]: *** [Makefile:820: osmo_trx_uhd-osmo-trx.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/Transceiver52M' make[2]: Leaving directory '/build/Transceiver52M' make[2]: *** [Makefile:860: all-recursive] Error 1 make[1]: Leaving directory '/build' make[1]: *** [Makefile:520: all-recursive] Error 1 make: *** [Makefile:451: all] Error 2 Build step 'Execute shell' marked build as failure Archiving artifacts

1 4

Build failed in Jenkins: master-osmo-trx » --with-neon-vfpv4,0,a3=default,a4=default,rpi4-raspbian11 #4760
by jenkins＠lists.osmocom.org 07 Nov '22

07 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> Changes: ------------------------------------------ [...truncated 100.38 KB...] checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether byte ordering is bigendian... no checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODING... yes checking boost/config.hpp usability... yes checking boost/config.hpp presence... yes checking for boost/config.hpp... yes checking for USRP... yes checking for LMS... yes checking for UHD... yes checking for UHD... yes checking whether gcc has __builtin_cpu_supports built-in... no configure: WARNING: Runtime SIMD detection will be disabled checking whether gcc has __sync_fetch_and_and built-in... yes checking whether gcc has __sync_or_and_fetch built-in... yes checking for LIBUSB... yes checking for FFTWF... yes CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CXXFLAGS="-g -O2" LDFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating CommonLibs/Makefile config.status: creating GSM/Makefile config.status: creating Transceiver52M/Makefile config.status: creating Transceiver52M/arch/Makefile config.status: creating Transceiver52M/arch/common/Makefile config.status: creating Transceiver52M/arch/arm/Makefile config.status: creating Transceiver52M/arch/x86/Makefile config.status: creating Transceiver52M/device/Makefile config.status: creating Transceiver52M/device/common/Makefile config.status: creating Transceiver52M/device/uhd/Makefile config.status: creating Transceiver52M/device/usrp1/Makefile config.status: creating Transceiver52M/device/lms/Makefile config.status: creating Transceiver52M/device/ipc/Makefile config.status: creating tests/Makefile config.status: creating tests/CommonLibs/Makefile config.status: creating tests/Transceiver52M/Makefile config.status: creating utils/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/osmo-trx.spec config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in CommonLibs make[2]: Entering directory '/build/CommonLibs' CXX BitVector.lo CXX LinkedLists.lo CXX Threads.lo CXX Timeval.lo CXX Logger.lo CXX Utils.lo CXX trx_rate_ctr.lo CC trx_vty.lo CC debug.lo CXXLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/CommonLibs' Making all in GSM make[2]: Entering directory '/build/GSM' CXX GSMCommon.lo CXXLD libGSM.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/GSM' Making all in Transceiver52M make[2]: Entering directory '/build/Transceiver52M' Making all in arch make[3]: Entering directory '/build/Transceiver52M/arch' Making all in common make[4]: Entering directory '/build/Transceiver52M/arch/common' CC convolve_base.lo CC convert_base.lo CC fft.lo CCLD libarch_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/common' Making all in arm make[4]: Entering directory '/build/Transceiver52M/arch/arm' CC convert.lo CPPAS convert_neon.lo CC convolve.lo CPPAS convolve_neon.lo CC scale.lo CPPAS scale_neon.lo CC mult.lo CPPAS mult_neon.lo CCLD libarch.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/arm' make[4]: Entering directory '/build/Transceiver52M/arch' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/arch' make[3]: Leaving directory '/build/Transceiver52M/arch' Making all in device make[3]: Entering directory '/build/Transceiver52M/device' Making all in common make[4]: Entering directory '/build/Transceiver52M/device/common' CXX smpl_buf.lo CXXLD libdevice_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/common' Making all in ipc make[4]: Entering directory '/build/Transceiver52M/device/ipc' echo "#include \"../uhd/UHDDevice.cpp\"" >uhddev_ipc.cpp L/build/deps/install/stow/libosmocore/lib -losmocore -ltalloc \ /bin/bash: L/build/deps/install/stow/libosmocore/lib: No such file or directory make all-am make[4]: [Makefile:966: uhddev_ipc.cpp] Error 127 (ignored) make[5]: Entering directory '/build/Transceiver52M/device/ipc' CC ipc_driver_test-ipc-driver-test.o CXX ipc_driver_test-uhdwrap.o CC ipc_driver_test-ipc_shm.o CC ipc_driver_test-ipc_chan.o CC ipc_driver_test-ipc_sock.o CXX ipc_driver_test-uhddev_ipc.o CC shm.lo CXX libdevice_la-IPCDevice.lo CC ipc_shm.lo CC ipc_chan.lo CC ipc_sock.lo In file included from /usr/include/c++/8/map:60, from ../uhd/UHDDevice.cpp:26, from uhddev_ipc.cpp:1: /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, int, int>; _Val = std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, int, int> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, int, int>, std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >, std::less<std::tuple<uhd_dev_type, int, int> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >’} changed in GCC 7.1 _Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>:: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, gsm_band>; _Val = std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, gsm_band> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, gsm_band>, std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >, std::less<std::tuple<uhd_dev_type, gsm_band> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >’} changed in GCC 7.1 CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') CXXLD ipc-driver-test make[5]: Leaving directory '/build/Transceiver52M/device/ipc' make[4]: Leaving directory '/build/Transceiver52M/device/ipc' Making all in usrp1 make[4]: Entering directory '/build/Transceiver52M/device/usrp1' CXX USRPDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/usrp1' Making all in uhd make[4]: Entering directory '/build/Transceiver52M/device/uhd' CXX UHDDevice.lo In file included from /usr/include/c++/8/map:60, from UHDDevice.cpp:26: /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, int, int>; _Val = std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, int, int> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, int, int>, std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >, std::less<std::tuple<uhd_dev_type, int, int> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, int, int>, dev_desc> >’} changed in GCC 7.1 _Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>:: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<uhd_dev_type, gsm_band>; _Val = std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >; _Compare = std::less<std::tuple<uhd_dev_type, gsm_band> >; _Alloc = std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<uhd_dev_type, gsm_band>, std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc>, std::_Select1st<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >, std::less<std::tuple<uhd_dev_type, gsm_band> >, std::allocator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<uhd_dev_type, gsm_band>, dev_band_desc> >’} changed in GCC 7.1 CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/uhd' Making all in lms make[4]: Entering directory '/build/Transceiver52M/device/lms' CXX LMSDevice.lo In file included from /usr/include/c++/8/map:60, from LMSDevice.cpp:24: /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = lms_dev_type; _Val = std::pair<const lms_dev_type, dev_desc>; _KeyOfValue = std::_Select1st<std::pair<const lms_dev_type, dev_desc> >; _Compare = std::less<lms_dev_type>; _Alloc = std::allocator<std::pair<const lms_dev_type, dev_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<lms_dev_type, std::pair<const lms_dev_type, dev_desc>, std::_Select1st<std::pair<const lms_dev_type, dev_desc> >, std::less<lms_dev_type>, std::allocator<std::pair<const lms_dev_type, dev_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const lms_dev_type, dev_desc> >’} changed in GCC 7.1 _Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>:: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/c++/8/bits/stl_tree.h: In member function ‘std::pair<std::_Rb_tree_node_base*, std::_Rb_tree_node_base*> std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_get_insert_hint_unique_pos(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::const_iterator, const key_type&) [with _Key = std::tuple<lms_dev_type, gsm_band>; _Val = std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc>; _KeyOfValue = std::_Select1st<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >; _Compare = std::less<std::tuple<lms_dev_type, gsm_band> >; _Alloc = std::allocator<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >]’: /usr/include/c++/8/bits/stl_tree.h:2146:5: note: parameter passing for argument of type ‘std::_Rb_tree<std::tuple<lms_dev_type, gsm_band>, std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc>, std::_Select1st<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >, std::less<std::tuple<lms_dev_type, gsm_band> >, std::allocator<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> > >::const_iterator’ {aka ‘std::_Rb_tree_const_iterator<std::pair<const std::tuple<lms_dev_type, gsm_band>, dev_band_desc> >’} changed in GCC 7.1 CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/lms' make[4]: Entering directory '/build/Transceiver52M/device' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/device' make[3]: Leaving directory '/build/Transceiver52M/device' make[3]: Entering directory '/build/Transceiver52M' CXX radioInterface.lo CXX osmo_trx_uhd-osmo-trx.o CXX radioClock.lo CXX radioVector.lo In file included from osmo-trx.cpp:45: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:10:32: error: option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [-Werror=pragmas] #pragma GCC diagnostic ignored "-Wstrict-prototypes" ^~~~~~~~~~~~~~~~~~~~~ CXX radioBuffer.lo CXX sigProcLib.lo CXX signalVector.lo CXX Transceiver.lo cc1plus: all warnings being treated as errors make[3]: *** [Makefile:820: osmo_trx_uhd-osmo-trx.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/Transceiver52M' make[2]: Leaving directory '/build/Transceiver52M' make[2]: *** [Makefile:860: all-recursive] Error 1 make[1]: *** [Makefile:520: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:451: all] Error 2 Build step 'Execute shell' marked build as failure Archiving artifacts

1 4

Build failed in Jenkins: update-osmo-ci-on-slaves » build2-deb9build-ansible #1330
by jenkins＠lists.osmocom.org 07 Nov '22

07 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> Changes: ------------------------------------------ [...truncated 10.97 KB...] Step 4/32 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" ---> Using cache ---> 2b6014824388 Step 5/32 : ARG OSMOCOM_REPO_PATH="packages/osmocom:" ---> Using cache ---> e04ecad49207 Step 6/32 : ARG DEBIAN_VERSION ---> Using cache ---> 887479f811fa Step 7/32 : ARG LLVM_VERSION="14.0.0" ---> Using cache ---> ca3800d81ad5 Step 8/32 : RUN [ "$(arch)" = "x86_64" ] && dpkg --add-architecture i386; DEBIAN_FRONTEND=noninteractive apt-get update && DEBIAN_FRONTEND=noninteractive apt-get upgrade -y && DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive automake bc bison bzip2 ca-certificates cmake coccinelle cppcheck dahdi-source dblatex dbus debhelper devscripts dh-autoreconf dh-systemd docbook5-xml doxygen flex g++ gawk gcc gcc-arm-none-eabi git git-buildpackage graphviz htop inkscape latexmk lcov libaio-dev libasound2-dev libboost-all-dev libc-ares-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client osc patchelf pkg-config python-pip python-setuptools python-yaml python2.7 python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo systemd tcpdump tex-gyre texinfo unzip wget xsltproc ---> Using cache ---> 82b90172d9d1 Step 9/32 : RUN set -x && [ "$(arch)" = "x86_64" ] || exit 0; wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-${LLVM_VERSION} /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets ---> Using cache ---> 5f4ee1aa5d46 Step 10/32 : RUN pip3 install 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pylint' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' 'swig' ---> Using cache ---> 5fb09ee9c365 Step 11/32 : ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt ---> Using cache ---> f85729e610b9 Step 12/32 : RUN pip3 install -r /tmp/pysim_requirements.txt ---> Using cache ---> 48b75fc46c9c Step 13/32 : RUN useradd --uid=1000 build ---> Using cache ---> aa50b82f3ab4 Step 14/32 : RUN mkdir /build ---> Using cache ---> 88733f198af7 Step 15/32 : RUN chown build:build /build ---> Using cache ---> 7a144f548557 Step 16/32 : ARG OSMO_PYTHON2_TESTS_COMMIT=fb4b813d4df62b7b2445bdced961eb1847267eed ---> Using cache ---> 4e776c73aeda Step 17/32 : ADD http://git.osmocom.org/python/osmo-python-tests/patch/?id=$OSMO_PYTHON2_TES… /tmp/osmo-python-tests2-commit ---> Using cache ---> 82b0fdb215bb Step 18/32 : RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests2 && cd osmo-python-tests2 && git checkout $OSMO_PYTHON2_TESTS_COMMIT && python2 setup.py clean build install ---> Using cache ---> ea53d3442dcb Step 19/32 : ADD http://git.osmocom.org/python/osmo-python-tests/patch /tmp/osmo-python-tests3-commit ---> Using cache ---> 233d87c0f9cd Step 20/32 : RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests3 && cd osmo-python-tests3 && python3 setup.py clean build install ---> Using cache ---> 9c18f7d062f1 Step 21/32 : ADD http://git.osmocom.org/osmo-ci/patch /tmp/osmo-ci-commit ---> Using cache ---> 316d823f691e Step 22/32 : RUN git clone https://gerrit.osmocom.org/osmo-ci osmo-ci && cp -v $(find osmo-ci/scripts -maxdepth 1 -type f ) /usr/local/bin ---> Using cache ---> b195892c6fb6 Step 23/32 : ADD http://git.osmocom.org/osmo-gsm-manuals/patch /tmp/osmo-gsm-manuals-commit ---> Using cache ---> 9f99b52e2b73 Step 24/32 : RUN git -C /opt clone https://gerrit.osmocom.org/osmo-gsm-manuals ---> Using cache ---> 801afc3aeeb3 Step 25/32 : RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && dpkg-reconfigure --frontend=noninteractive locales && update-locale LANG=en_US.UTF-8 ---> Using cache ---> f2be2849aee7 Step 26/32 : ENV LANG en_US.UTF-8 ---> Using cache ---> 83178359a8c0 Step 27/32 : ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/nightly/Debian_10/" ---> Using cache ---> 60391d3a7336 Step 28/32 : COPY .common/Release.key /tmp/Release.key ---> Using cache ---> 2fce187258d6 Step 29/32 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key && echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-nightly.list ---> Using cache ---> c35acf910986 Step 30/32 : ADD $OSMOCOM_REPO/Release /tmp/Release ---> Using cache ---> 526ed6563aa7 Step 31/32 : RUN apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean ---> Using cache ---> 460cf854800f Step 32/32 : RUN chown -R build:build /usr/local ---> Using cache ---> afdda008d36e [Warning] One or more build-args [LIBOSMOCORE_BRANCH OSMOCOM_REPO_VERSION OSMO_UECUPS_BRANCH OSMO_HNBGW_BRANCH OSMO_HNODEB_BRANCH OSMO_MSC_BRANCH OPEN5GS_BRANCH OSMO_BSC_BRANCH OSMO_HLR_BRANCH OSMO_SGSN_BRANCH OSMO_SIP_BRANCH UPSTREAM_DISTRO OSMO_CBC_BRANCH OSMO_GBPROXY_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_TTCN3_BRANCH UID OSMO_PCU_BRANCH OSMO_STP_BRANCH DISTRO OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_BB_BRANCH OSMO_GGSN_BRANCH OSMO_IUH_BRANCH OSMO_MGW_BRANCH OSMO_BTS_BRANCH OSMO_NITB_BRANCH USER] were not consumed Successfully built afdda008d36e Successfully tagged osmocom-build/debian-buster-jenkins:latest rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…'> + docker_image_exists debian-buster-jenkins + docker images -q osmocom-build/debian-buster-jenkins + test -n afdda008d36e + list_osmo_packages debian-buster debian-buster-jenkins + local distro=debian-buster + local image=debian-buster-jenkins + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-buster-jenkins -c + [ -n ] + return + ret=0 + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + return 0 + arch + [ x86_64 = x86_64 ] + docker_images_require debian-bullseye-erlang debian-bullseye-jenkins + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + [ -L _docker_playground ] + [ -d _docker_playground ] + git -C _docker_playground fetch + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at df4522a hnbgw: Only build with_pfcp on master + cd debian-bullseye-erlang + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> ] + [ xjenkins-update-osmo-ci-on-slaves-label=build2-deb9build-ansible-1330 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> + SUITE_NAME=debian-bullseye-erlang + NET_NAME=debian-bullseye-erlang + docker_images_require debian-bullseye-erlang debian-bullseye-jenkins + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-bullseye-erlang + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bullseye-erlang + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-bullseye-erlang + echo debian:bullseye + upstream_distro_arg=debian:bullseye + docker_dir_from_image_name debian-bullseye-erlang + echo debian-bullseye-erlang + dir=debian-bullseye-erlang + pull_arg=--pull + grep ^FROM ../debian-bullseye-erlang/Dockerfile + from_line=FROM ${REGISTRY}/debian:bullseye + echo FROM ${REGISTRY}/debian:bullseye + grep -q $USER + echo Building image: debian-bullseye-erlang (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-bullseye-erlang (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bullseye-erlang BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bullseye DISTRO=debian-bullseye IMAGE=osmocom-build/debian-bullseye-erlang make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…'> awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bullseye \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bullseye-erlang:latest . Sending build context to Docker daemon 25.6kB Step 1/18 : ARG REGISTRY=docker.io Step 2/18 : FROM ${REGISTRY}/debian:bullseye bullseye: Pulling from library/debian Digest: sha256:bfe6615d017d1eebe19f349669de58cda36c668ef916e618be78071513c690e5 Status: Image is up to date for debian:bullseye ---> d8cacd17cfdc Step 3/18 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" ---> Using cache ---> f2fc64b71313 Step 4/18 : ARG OSMOCOM_REPO_PATH="packages/osmocom:" ---> Using cache ---> 48e52fd4510d Step 5/18 : ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/latest/Debian_11/" ---> Using cache ---> a52837c20d59 Step 6/18 : RUN apt-get update && apt-get upgrade -y && apt-get -y install erlang rebar ---> Using cache ---> 868293ca343d Step 7/18 : ARG REBAR3_VERSION="3.18.0" ---> Using cache ---> e8d6093da618 Step 8/18 : ADD https://github.com/erlang/rebar3/archive/refs/tags/${REBAR3_VERSION}.tar.gz /tmp/rebar3.tar.gz ADD failed: Get https://github.com/erlang/rebar3/archive/refs/tags/3.18.0.tar.gz: net/http: TLS handshake timeout ../make/Makefile:90: recipe for target 'docker-build' failed make: *** [docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=buil…'> + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-trx » --without-sse,1,a3=default,a4=default,osmocom-master-debian9 #4760
by jenkins＠lists.osmocom.org 07 Nov '22

07 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--without-sse…> Changes: ------------------------------------------ [...truncated 100.15 KB...] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether byte ordering is bigendian... no checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODING... yes checking boost/config.hpp usability... yes checking boost/config.hpp presence... yes checking for boost/config.hpp... yes checking for USRP... yes checking for LMS... yes checking for UHD... yes checking for UHD... yes checking whether gcc has __builtin_cpu_supports built-in... yes checking whether gcc has __sync_fetch_and_and built-in... yes checking whether gcc has __sync_or_and_fetch built-in... yes checking for LIBUSB... yes checking for FFTWF... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CXXFLAGS="-g -O2" LDFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating CommonLibs/Makefile config.status: creating GSM/Makefile config.status: creating Transceiver52M/Makefile config.status: creating Transceiver52M/arch/Makefile config.status: creating Transceiver52M/arch/common/Makefile config.status: creating Transceiver52M/arch/arm/Makefile config.status: creating Transceiver52M/arch/x86/Makefile config.status: creating Transceiver52M/device/Makefile config.status: creating Transceiver52M/device/common/Makefile config.status: creating Transceiver52M/device/uhd/Makefile config.status: creating Transceiver52M/device/usrp1/Makefile config.status: creating Transceiver52M/device/lms/Makefile config.status: creating Transceiver52M/device/ipc/Makefile config.status: creating tests/Makefile config.status: creating tests/CommonLibs/Makefile config.status: creating tests/Transceiver52M/Makefile config.status: creating utils/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/osmo-trx.spec config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in CommonLibs make[2]: Entering directory '/build/CommonLibs' CXX BitVector.lo CXX Threads.lo CXX LinkedLists.lo CXX Timeval.lo CXX Logger.lo CXX Utils.lo CXX trx_rate_ctr.lo CC trx_vty.lo CC debug.lo CXXLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/CommonLibs' Making all in GSM make[2]: Entering directory '/build/GSM' CXX GSMCommon.lo CXXLD libGSM.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/GSM' Making all in Transceiver52M make[2]: Entering directory '/build/Transceiver52M' Making all in arch make[3]: Entering directory '/build/Transceiver52M/arch' Making all in common make[4]: Entering directory '/build/Transceiver52M/arch/common' CC convolve_base.lo CC convert_base.lo CC fft.lo CCLD libarch_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/common' Making all in x86 make[4]: Entering directory '/build/Transceiver52M/arch/x86' CC convert.lo CC convolve.lo CCLD libarch_sse_3.la CCLD libarch_sse_4_1.la ar: `u' modifier ignored since `D' is the default (see `U') ar: `u' modifier ignored since `D' is the default (see `U') CCLD libarch.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/x86' make[4]: Entering directory '/build/Transceiver52M/arch' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/arch' make[3]: Leaving directory '/build/Transceiver52M/arch' Making all in device make[3]: Entering directory '/build/Transceiver52M/device' Making all in common make[4]: Entering directory '/build/Transceiver52M/device/common' CXX smpl_buf.lo CXXLD libdevice_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/common' Making all in ipc make[4]: Entering directory '/build/Transceiver52M/device/ipc' echo "#include \"../uhd/UHDDevice.cpp\"" >uhddev_ipc.cpp L/build/deps/install/stow/libosmocore/lib -losmocore -ltalloc \ /bin/bash: L/build/deps/install/stow/libosmocore/lib: No such file or directory make[4]: [Makefile:966: uhddev_ipc.cpp] Error 127 (ignored) make all-am make[5]: Entering directory '/build/Transceiver52M/device/ipc' CC ipc_driver_test-ipc-driver-test.o CXX ipc_driver_test-uhdwrap.o CC ipc_driver_test-ipc_shm.o CC ipc_driver_test-ipc_chan.o CC ipc_driver_test-ipc_sock.o CXX ipc_driver_test-uhddev_ipc.o CC shm.lo CXX libdevice_la-IPCDevice.lo CC ipc_shm.lo CC ipc_chan.lo CC ipc_sock.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') CXXLD ipc-driver-test make[5]: Leaving directory '/build/Transceiver52M/device/ipc' make[4]: Leaving directory '/build/Transceiver52M/device/ipc' Making all in usrp1 make[4]: Entering directory '/build/Transceiver52M/device/usrp1' CXX USRPDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/usrp1' Making all in uhd make[4]: Entering directory '/build/Transceiver52M/device/uhd' CXX UHDDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/uhd' Making all in lms make[4]: Entering directory '/build/Transceiver52M/device/lms' CXX LMSDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/lms' make[4]: Entering directory '/build/Transceiver52M/device' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/device' make[3]: Leaving directory '/build/Transceiver52M/device' make[3]: Entering directory '/build/Transceiver52M' CXX osmo_trx_uhd-osmo-trx.o CXX radioVector.lo CXX radioInterface.lo CXX radioClock.lo In file included from osmo-trx.cpp:45: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:10:32: error: option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [-Werror=pragmas] #pragma GCC diagnostic ignored "-Wstrict-prototypes" ^~~~~~~~~~~~~~~~~~~~~ CXX radioBuffer.lo CXX sigProcLib.lo CXX signalVector.lo CXX Transceiver.lo cc1plus: all warnings being treated as errors make[3]: *** [Makefile:820: osmo_trx_uhd-osmo-trx.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/Transceiver52M' make[2]: *** [Makefile:860: all-recursive] Error 1 make[2]: Leaving directory '/build/Transceiver52M' make[1]: *** [Makefile:520: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:451: all] Error 2 Build step 'Execute shell' marked build as failure Archiving artifacts

1 4

Build failed in Jenkins: master-osmo-trx » --with-sse,0,a3=default,a4=default,osmocom-master-debian9 #4760
by jenkins＠lists.osmocom.org 07 Nov '22

07 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> Changes: ------------------------------------------ [...truncated 100.70 KB...] checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether byte ordering is bigendian... no checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODING... yes checking boost/config.hpp usability... yes checking boost/config.hpp presence... yes checking for boost/config.hpp... yes checking for USRP... yes checking for LMS... yes checking for UHD... yes checking for UHD... yes checking whether C++ compiler accepts -msse3... yes checking whether C++ compiler accepts -msse4.1... yes checking whether gcc has __builtin_cpu_supports built-in... yes checking whether gcc has __sync_fetch_and_and built-in... yes checking whether gcc has __sync_or_and_fetch built-in... yes checking for LIBUSB... yes checking for FFTWF... yes CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CXXFLAGS="-g -O2" LDFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating CommonLibs/Makefile config.status: creating GSM/Makefile config.status: creating Transceiver52M/Makefile config.status: creating Transceiver52M/arch/Makefile config.status: creating Transceiver52M/arch/common/Makefile config.status: creating Transceiver52M/arch/arm/Makefile config.status: creating Transceiver52M/arch/x86/Makefile config.status: creating Transceiver52M/device/Makefile config.status: creating Transceiver52M/device/common/Makefile config.status: creating Transceiver52M/device/uhd/Makefile config.status: creating Transceiver52M/device/usrp1/Makefile config.status: creating Transceiver52M/device/lms/Makefile config.status: creating Transceiver52M/device/ipc/Makefile config.status: creating tests/Makefile config.status: creating tests/CommonLibs/Makefile config.status: creating tests/Transceiver52M/Makefile config.status: creating utils/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/osmo-trx.spec config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 make all-recursive make[1]: Entering directory '/build' Making all in CommonLibs make[2]: Entering directory '/build/CommonLibs' CXX BitVector.lo CXX LinkedLists.lo CXX Threads.lo CXX Timeval.lo CXX Logger.lo CXX Utils.lo CC trx_vty.lo CXX trx_rate_ctr.lo CC debug.lo CXXLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/CommonLibs' Making all in GSM make[2]: Entering directory '/build/GSM' CXX GSMCommon.lo CXXLD libGSM.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/build/GSM' Making all in Transceiver52M make[2]: Entering directory '/build/Transceiver52M' Making all in arch make[3]: Entering directory '/build/Transceiver52M/arch' Making all in common make[4]: Entering directory '/build/Transceiver52M/arch/common' CC convolve_base.lo CC convert_base.lo CC fft.lo CCLD libarch_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/common' Making all in x86 make[4]: Entering directory '/build/Transceiver52M/arch/x86' CC convert.lo CC convolve.lo CC libarch_sse_3_la-convert_sse_3.lo CC libarch_sse_3_la-convolve_sse_3.lo CC libarch_sse_4_1_la-convert_sse_4_1.lo CCLD libarch_sse_4_1.la CCLD libarch_sse_3.la ar: `u' modifier ignored since `D' is the default (see `U') ar: `u' modifier ignored since `D' is the default (see `U') CCLD libarch.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/arch/x86' make[4]: Entering directory '/build/Transceiver52M/arch' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/arch' make[3]: Leaving directory '/build/Transceiver52M/arch' Making all in device make[3]: Entering directory '/build/Transceiver52M/device' Making all in common make[4]: Entering directory '/build/Transceiver52M/device/common' CXX smpl_buf.lo CXXLD libdevice_common.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/common' Making all in ipc make[4]: Entering directory '/build/Transceiver52M/device/ipc' echo "#include \"../uhd/UHDDevice.cpp\"" >uhddev_ipc.cpp L/build/deps/install/stow/libosmocore/lib -losmocore -ltalloc \ /bin/bash: L/build/deps/install/stow/libosmocore/lib: No such file or directory make[4]: [Makefile:966: uhddev_ipc.cpp] Error 127 (ignored) make all-am make[5]: Entering directory '/build/Transceiver52M/device/ipc' CXX ipc_driver_test-uhdwrap.o CC ipc_driver_test-ipc-driver-test.o CC ipc_driver_test-ipc_shm.o CC ipc_driver_test-ipc_chan.o CC ipc_driver_test-ipc_sock.o CXX ipc_driver_test-uhddev_ipc.o CC shm.lo CXX libdevice_la-IPCDevice.lo CC ipc_shm.lo CC ipc_chan.lo CC ipc_sock.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') CXXLD ipc-driver-test make[5]: Leaving directory '/build/Transceiver52M/device/ipc' make[4]: Leaving directory '/build/Transceiver52M/device/ipc' Making all in usrp1 make[4]: Entering directory '/build/Transceiver52M/device/usrp1' CXX USRPDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/usrp1' Making all in uhd make[4]: Entering directory '/build/Transceiver52M/device/uhd' CXX UHDDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/uhd' Making all in lms make[4]: Entering directory '/build/Transceiver52M/device/lms' CXX LMSDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/Transceiver52M/device/lms' make[4]: Entering directory '/build/Transceiver52M/device' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/Transceiver52M/device' make[3]: Leaving directory '/build/Transceiver52M/device' make[3]: Entering directory '/build/Transceiver52M' CXX osmo_trx_uhd-osmo-trx.o CXX radioInterface.lo CXX radioVector.lo CXX radioClock.lo CXX radioBuffer.lo CXX sigProcLib.lo CXX signalVector.lo CXX Transceiver.lo In file included from osmo-trx.cpp:45: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:10:32: error: option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [-Werror=pragmas] #pragma GCC diagnostic ignored "-Wstrict-prototypes" ^~~~~~~~~~~~~~~~~~~~~ CXX ChannelizerBase.lo CXX Channelizer.lo CXX Synthesis.lo CC proto_trxd.lo CXX Resampler.lo CXX radioInterfaceResamp.lo CXX radioInterfaceMulti.lo CXX osmo_trx_usrp1-osmo-trx.o In file included from osmo-trx.cpp:45: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:10:32: error: option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [-Werror=pragmas] #pragma GCC diagnostic ignored "-Wstrict-prototypes" ^~~~~~~~~~~~~~~~~~~~~ CXX osmo_trx_lms-osmo-trx.o In file included from osmo-trx.cpp:45: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:10:32: error: option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [-Werror=pragmas] #pragma GCC diagnostic ignored "-Wstrict-prototypes" ^~~~~~~~~~~~~~~~~~~~~ cc1plus: all warnings being treated as errors make[3]: *** [Makefile:820: osmo_trx_uhd-osmo-trx.o] Error 1 make[3]: *** Waiting for unfinished jobs.... cc1plus: all warnings being treated as errors make[3]: *** [Makefile:834: osmo_trx_usrp1-osmo-trx.o] Error 1 cc1plus: all warnings being treated as errors make[3]: *** [Makefile:806: osmo_trx_lms-osmo-trx.o] Error 1 make[3]: Leaving directory '/build/Transceiver52M' make[2]: *** [Makefile:860: all-recursive] Error 1 make[2]: Leaving directory '/build/Transceiver52M' make[1]: *** [Makefile:520: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:451: all] Error 2 Build step 'Execute shell' marked build as failure Archiving artifacts

1 4

Build failed in Jenkins: Osmocom-build-tags-against-master #1355
by jenkins＠lists.osmocom.org 07 Nov '22

07 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/1…> Changes: [Oliver Smith] obs: build_binpkg: add --run-shell-on-error arg [Oliver Smith] jobs/obs: don't upload to build.opensuse.org [Oliver Smith] jobs/master-builds: add timeout_cmd [Oliver Smith] jobs: osmo-e1-hardware: split into job types [Oliver Smith] lint: enable FUNCTION_WITHOUT_ARGS [laforge] ggsn-kernel-gtp: Use new OBS package feed, not old obs.opensuse.org [laforge] ggsn-kernel-gtp: Use my current SSH public key [laforge] obs: check_builders: at least 10, fail on error ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 osmocom-gerrit repo-install-test coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/fixeria/fixes Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/obs Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/centos-install-test Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/fix-python3 Seen branch in repository origin/osmith/gerrit-lint Seen branch in repository origin/osmith/gerrit-mail-on-success Seen branch in repository origin/osmith/ggsn-kernel-mod-test Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/obs-check-builders Seen branch in repository origin/osmith/obs-fixes Seen branch in repository origin/osmith/obs-latest-fix Seen branch in repository origin/osmith/obs-mirror Seen branch in repository origin/osmith/obs-nftables Seen branch in repository origin/osmith/rpm Seen branch in repository origin/osmith/ttcn3-centos Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-ci-packaging Seen branch in repository origin/osmith/wip-docuum Seen branch in repository origin/osmith/wip-obs Seen branch in repository origin/osmith/wip-obs-asan Seen branch in repository origin/pespin/limesuite-latest Seen branch in repository origin/pespin/open5gs Seen 28 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 288fa2d51ef6ea2891965b0c7508ab62d3e4cc43 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 288fa2d51ef6ea2891965b0c7508ab62d3e4cc43 # timeout=10 Commit message: "obs: check_builders: at least 10, fail on error" > git rev-list --no-walk 13b76cced118be670b00d364a9f8c9f701462639 # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins2845433278793286917.sh + PARALLEL_MAKE=-j8 scripts/osmocom-build-old-tags-against-master.sh Temp dir: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> Building libraries from current master... * libosmocore de4e8daf7debb508ed4af7d4e5e51a7438f7bb96 * libosmo-abis 35c109fd8b9dc7f725a172dcbdf897c1f25d7bb9 * libosmo-netif 6bca110e3f0423aa7587dbfc269fef435f536d27 * libosmo-sccp 71fc3224314dad9aa5d4c204c199e75f715f0801 * libsmpp34 6613063fba3380c1ed7d1cf704e6815697f2943c * libasn1c 71cb3d49a888ed14ce1fa53123b587705e053f9d * osmo-ggsn 9f1f747d8ee89743951eae1db6cda2de5e5b9848 * osmo-iuh a9c380afaede9a0a744a5e5a5603e8d609b02797 * osmo-hlr 7a4765325d1f6accdbad3b74abddc2760f014c11 * osmo-mgw 9befdeb673a985f0f9fa0d60f7e86ac5a0e1da22 Building legacy libraries... * osmo-mgw 1.4.0 (provides libosmo-legacy-mgcp) --- BUILD FAILED: osmo-mgw-1.4.0.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- ^~~~~~~ mgcp_main.c: In function ‘main’: mgcp_main.c:263:2: error: too many arguments to function ‘logging_vty_add_cmds’ logging_vty_add_cmds(NULL); ^~~~~~~~~~~~~~~~~~~~ In file included from mgcp_main.c:48:0: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…>:9:6: note: declared here void logging_vty_add_cmds(void); ^~~~~~~~~~~~~~~~~~~~ Makefile:451: recipe for target 'mgcp_main.o' failed make[3]: *** [mgcp_main.o] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:405: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:503: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:802: recipe for target 'install' failed make: *** [install] Error 2 --- Build step 'Execute shell' marked build as failure Archiving artifacts

1 2

Build failed in Jenkins: master-osmo-e1-recorder » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #1081
by jenkins＠lists.osmocom.org 06 Nov '22

06 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-e1-recorder/a1=default,…> Changes: ------------------------------------------ [...truncated 101.67 KB...] CC ipa_proxy.lo CC subchan_demux.lo CC trau_frame.lo CC input/e1d.lo CC input/ipa.lo CC input/ipa_keepalive.lo CC input/ipaccess.lo CC input/lapd.lo CC input/lapd_pcap.lo CC input/misdn.lo CC input/rs232.lo CC input/unixsocket.lo CC input/dahdi.lo CC trau/libosmotrau_la-osmo_ortp.lo CC trau/libosmotrau_la-trau_frame.lo CC trau/libosmotrau_la-trau_sync.lo trau/osmo_ortp.c:232:9: note: #pragma message: Using internal ortp API: rtp_session_rtcp_rec #pragma message ("Using internal ortp API: rtp_session_rtcp_rec") ^~~~~~~ CC trau/libosmotrau_la-trau_rtp_conv.lo CCLD libosmoabis.la CCLD libosmotrau.la ar: `u' modifier ignored since `D' is the default (see `U') ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Entering directory '/build/deps/libosmo-abis/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libosmoabis.la libosmotrau.la '/build/deps/install/stow/libosmo-abis/lib' libtool: install: /usr/bin/install -c .libs/libosmoabis.so.10.1.1 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.so.10.1.1 libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.10.1.1 libosmoabis.so.10 || { rm -f libosmoabis.so.10 && ln -s libosmoabis.so.10.1.1 libosmoabis.so.10; }; }) libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.10.1.1 libosmoabis.so || { rm -f libosmoabis.so && ln -s libosmoabis.so.10.1.1 libosmoabis.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmoabis.lai /build/deps/install/stow/libosmo-abis/lib/libosmoabis.la libtool: install: /usr/bin/install -c .libs/libosmotrau.so.2.5.0 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.so.2.5.0 libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.2.5.0 libosmotrau.so.2 || { rm -f libosmotrau.so.2 && ln -s libosmotrau.so.2.5.0 libosmotrau.so.2; }; }) libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.2.5.0 libosmotrau.so || { rm -f libosmotrau.so && ln -s libosmotrau.so.2.5.0 libosmotrau.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmotrau.lai /build/deps/install/stow/libosmo-abis/lib/libosmotrau.la libtool: install: /usr/bin/install -c .libs/libosmoabis.a /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a libtool: install: /usr/bin/install -c .libs/libosmotrau.a /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a libtool: finish: PATH="/build/deps/install/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmo-abis/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmo-abis/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmo-abis/src' make[2]: Leaving directory '/build/deps/libosmo-abis/src' Making install in tests make[2]: Entering directory '/build/deps/libosmo-abis/tests' make[3]: Entering directory '/build/deps/libosmo-abis/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/deps/libosmo-abis/tests' make[2]: Leaving directory '/build/deps/libosmo-abis/tests' make[2]: Entering directory '/build/deps/libosmo-abis' make[3]: Entering directory '/build/deps/libosmo-abis' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib/pkgconfig' /usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/deps/install/stow/libosmo-abis/lib/pkgconfig' make[3]: Leaving directory '/build/deps/libosmo-abis' make[2]: Leaving directory '/build/deps/libosmo-abis' make[1]: Leaving directory '/build/deps/libosmo-abis' + STOW_DIR=/build/deps/install/stow stow --restow libosmo-abis + CONFIG= + '[' 1 = 1 ']' + CONFIG=--enable-manuals + set +x =============================== osmo-e1-recorder =============================== + cd /build + autoreconf --install --force aclocal: warning: couldn't open directory 'm4': No such file or directory libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. configure.ac:23: installing './compile' configure.ac:25: installing './config.guess' configure.ac:25: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' src/Makefile.am: installing './depcomp' + ./configure --enable-sanitize --enable-external-tests --enable-werror --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOABIS... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether to enable code coverage support... no checking for python2... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating tests/Makefile config.status: creating doc/examples/Makefile config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 0.2.25-be5f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in doc make[2]: Entering directory '/build/doc' Making all in examples make[3]: Entering directory '/build/doc/examples' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/doc/examples' make[3]: Entering directory '/build/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/doc' make[2]: Leaving directory '/build/doc' Making all in src make[2]: Entering directory '/build/src' CC e1_recorder.o CC storage.o CC vty.o CC e1cap_dump.o e1_recorder.c: In function ‘main’: e1_recorder.c:190:2: error: too many arguments to function ‘logging_vty_add_cmds’ logging_vty_add_cmds(&info); ^~~~~~~~~~~~~~~~~~~~ In file included from e1_recorder.c:10: /build/deps/install/stow/libosmocore/include/osmocom/vty/logging.h:9:6: note: declared here void logging_vty_add_cmds(void); ^~~~~~~~~~~~~~~~~~~~ make[2]: *** [Makefile:506: e1_recorder.o] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/src' make[1]: Leaving directory '/build' make[1]: *** [Makefile:430: all-recursive] Error 1 make: *** [Makefile:362: all] Error 2 Build step 'Execute shell' marked build as failure Archiving artifacts

1 2

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #8669
by jenkins＠lists.osmocom.org 05 Nov '22

05 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 206.99 KB...] 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011ec50 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c000000160 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c0000000a0 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c000032da0 RESULTS: pass: ./test_nodes.vty pass: ./test_subscr_create_on_demand.vty pass: ./test_subscriber.vty rm -f hlr_vty_test.db hlr_vty_test.db-* make[6]: Leaving directory '/build/tests' make ctrl-test make[6]: Entering directory '/build/tests' rm -f hlr_ctrl_test.db sqlite3 hlr_ctrl_test.db < ../sql/hlr.sql sqlite3 hlr_ctrl_test.db < ./test_subscriber.sql osmo_verify_transcript_ctrl.py -v \ -p 4259 \ -r "../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db" \ ./*.ctrl 20221105160800842 [1;33mDMAIN[0;m [1;33mNOTICE[0;m hlr starting (hlr.c:791) [1;31m20221105160800842 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m using database: hlr_ctrl_test.db (db.c:558) [0;mLaunching: cd '/build/tests'; ../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db Terminating took 3.400s Traceback (most recent call last): File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 356, in verify_application interact.connect() File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/ctrl.py", line 64, in connect super().connect() File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 88, in connect self.socket.connect((self.host, int(self.port))) ConnectionRefusedError: [Errno 111] Connection refused 20221105160807925 [1;33mDMAIN[0;m [1;33mNOTICE[0;m hlr starting (hlr.c:791) [1;31m20221105160807925 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m using database: hlr_ctrl_test.db (db.c:558) [0;m[1;31m20221105160808396 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database 'hlr_ctrl_test.db' has HLR DB schema version 6 (db.c:636) [0;m20221105160808398 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4258 (telnet_interface.c:100) [38;5;33m20221105160808398 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4259 (control_if.c:1013) [0;mLaunching: cd '/build/tests'; ../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db GET 1 invalid ERROR 1 Command not found SET 2 invalid nonsense ERROR 2 Command not found GET 3 subscriber.by-imsi-nonsense.info ERROR 3 Invalid value part of 'by-xxx-value' selector. GET 4 subscriber.by-msisdn-nonsense.info ERROR 4 Invalid value part of 'by-xxx-value' selector. GET 5 subscriber.by-id-nonsense.info ERROR 5 Invalid value part of 'by-xxx-value' selector. GET 6 subscriber ERROR 6 Command not present. GET 7 subscriber. ERROR 7 Command not present. GET 8 subscriber.by-nonsense ERROR 8 Command not present. GET 9 subscriber.by-nonsense- ERROR 9 Command not present. GET 10 subscriber.by-nonsense-123456 ERROR 10 Command not present. GET 11 subscriber.by-nonsense-123456. ERROR 11 Command not present. GET 12 subscriber.by-imsi- ERROR 12 Command not present. GET 13 subscriber.by-imsi-. ERROR 13 Command not present. GET 14 subscriber.by-imsi-901990000000003 ERROR 14 Command not present. GET 15 subscriber.by-imsi-901990000000003. ERROR 15 Command not present. GET 16 subscriber.by-nonsense-123456.info ERROR 16 Not a known subscriber 'by-xxx-' selector. GET 17 subscriber.by-123456.info ERROR 17 Not a known subscriber 'by-xxx-' selector. GET 18 subscriber.by-imsi-.info ERROR 18 Invalid value part of 'by-xxx-value' selector. GET 19 subscriber.by-imsi--.info ERROR 19 Invalid value part of 'by-xxx-value' selector. GET 20 subscriber.by-imsi-12345678901234567.info ERROR 20 Invalid value part of 'by-xxx-value' selector. GET 21 subscriber.by-imsi-12345.info ERROR 21 Invalid value part of 'by-xxx-value' selector. GET 22 subscriber.by-imsi-1234567890123456.info ERROR 22 Invalid value part of 'by-xxx-value' selector. GET 23 subscriber.by-id-99999999999999999999999999.info ERROR 23 Invalid value part of 'by-xxx-value' selector. GET 24 subscriber.by-id-9223372036854775807.info ERROR 24 No such subscriber. GET 25 subscriber.by-id-9223372036854775808.info ERROR 25 Invalid value part of 'by-xxx-value' selector. GET 26 subscriber.by-id--1.info ERROR 26 No such subscriber. GET 27 subscriber.by-id--9223372036854775808.info ERROR 27 No such subscriber. GET 28 subscriber.by-id--9223372036854775809.info ERROR 28 Invalid value part of 'by-xxx-value' selector. GET 29 subscriber.by-id-1+1.info [38;5;33m20221105160808411 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-1+1.info" (control_cmd.c:405) [0;mERROR 29 GET variable contains invalid characters GET 30 subscriber.by-id--.info ERROR 30 Invalid value part of 'by-xxx-value' selector. GET 31 subscriber.by-id-+1.info [38;5;33m20221105160808412 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+1.info" (control_cmd.c:405) [0;mERROR 31 GET variable contains invalid characters GET 32 subscriber.by-id-+-1.info [38;5;33m20221105160808412 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+-1.info" (control_cmd.c:405) [0;mERROR 32 GET variable contains invalid characters GET 33 subscriber.by-id--+1.info [38;5;33m20221105160808412 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id--+1.info" (control_cmd.c:405) [0;mERROR 33 GET variable contains invalid characters GET 34 subscriber.by-id-++1.info [38;5;33m20221105160808412 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-++1.info" (control_cmd.c:405) [0;mERROR 34 GET variable contains invalid characters GET 35 subscriber.by-id---1.info ERROR 35 Invalid value part of 'by-xxx-value' selector. GET 36 subscriber.by-id- 1.info [38;5;33m20221105160808412 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET with trailing characters: "1.info" (control_cmd.c:414) [0;mERROR 36 GET with trailing characters GET 37 subscriber.by-id-+ 1.info [38;5;33m20221105160808412 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+" (control_cmd.c:405) [0;mERROR 37 GET variable contains invalid characters GET 38 subscriber.by-id-- 1.info [38;5;33m20221105160808413 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET with trailing characters: "1.info" (control_cmd.c:414) [0;mERROR 38 GET with trailing characters SET 39 subscriber.by-imsi-901990000000001.info foo ERROR 39 Read Only attribute SET 40 subscriber.by-imsi-901990000000001.info-aud foo ERROR 40 Read Only attribute SET 41 subscriber.by-imsi-901990000000001.info-all foo ERROR 41 Read Only attribute SET 42 subscriber.by-imsi-901990000000001.ps-enabled nonsense ERROR 42 Value failed verification. SET 43 subscriber.by-imsi-901990000000001.cs-enabled nonsense ERROR 43 Value failed verification. SET 44 subscriber.by-imsi-901990000000001.ps-enabled [38;5;33m20221105160808413 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m SET Command incomplete (control_cmd.c:425) [0;mERROR 44 SET incomplete SET 45 subscriber.by-imsi-901990000000001.cs-enabled [38;5;33m20221105160808413 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m SET Command incomplete (control_cmd.c:425) [0;mERROR 45 SET incomplete GET 46 subscriber.by-imsi-1234567890123456.ps-enabled ERROR 46 Invalid value part of 'by-xxx-value' selector. GET 47 subscriber.by-imsi-1234567890123456.cs-enabled ERROR 47 Invalid value part of 'by-xxx-value' selector. GET 48 subscriber.by-id-0x0123.info ERROR 48 Invalid value part of 'by-xxx-value' selector. SET 49 subscriber.create zzz ERROR 49 Invalid IMSI value. SET 50 subscriber.create 901990000000001 [1;31m20221105160808414 [1;31mDDB[0;m[1;31m [1;31mERROR[0;m[1;31m (2067) abort at 20 in [INSERT INTO subscriber (imsi, nam_cs, nam_ps) VALUES ($imsi, $nam_cs, $nam_ps)]: UNIQUE constraint failed: subscriber.imsi (db.c:103) [0;m[1;33m20221105160808414 [1;31mDAUC[0;m[1;33m [1;31mERROR[0;m[1;33m IMSI='901990000000001': Cannot create subscriber: SQL error: (2067) UNIQUE constraint failed: subscriber.imsi (db_hlr.c:76) [0;mERROR 50 Subscriber already exists. SET 51 subscriber.by-imsi-1234567890123456.msisdn hellobadmsisdn ERROR 51 Value failed verification. SET 52 subscriber.delete 100000 ERROR 52 Subscriber doesn't exist. SET 53 subscriber.delete zzz ERROR 53 Invalid IMSI value. SET 54 subscriber.by-imsi-901990000000003.aud2g foobar ERROR 54 Value failed verification. SET 55 subscriber.by-imsi-901990000000003.aud2g foobar,2134 ERROR 55 Unknown auth algorithm. SET 56 subscriber.by-imsi-901990000000003.aud2g xor,2134 ERROR 56 Invalid KI. SET 57 subscriber.by-imsi-901990000000003.aud3g foobar ERROR 57 Value failed verification. SET 58 subscriber.by-imsi-901990000000003.aud3g foobar,2134 ERROR 58 Unknown auth algorithm. SET 60 subscriber.by-imsi-901990000000003.aud3g milenage,2134 ERROR 60 Invalid KI. SET 61 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,AAA ERROR 61 Invalid format. SET 62 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,OPC ERROR 62 Invalid format. SET 63 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,OPC,zzz ERROR 63 Invalid OP/OPC. SET 64 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,OPC,fb2a3d1b360f599abab99db8669f8308, ERROR 64 Invalid format. 20221105160808416 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Terminating due to signal=15 (hlr.c:719) full talloc report on 'OsmoHLR' (total 799 bytes in 17 blocks) telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b0001277e0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011dde0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f000001f90 dgsm contains 40 bytes in 2 blocks (ref 0) 0x608000000200 struct osmo_mslookup_client contains 40 bytes in 1 blocks (ref 0) 0x60d000025770 struct hlr contains 675 bytes in 10 blocks (ref 0) 0x6160000000e0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x610000001ea0 hlr_ctrl_test.db contains 17 bytes in 1 blocks (ref 0) 0x60c000030520 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d000022780 *#101# contains 7 bytes in 1 blocks (ref 0) 0x60b00011fcd0 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d0000226b0 *#100# contains 7 bytes in 1 blocks (ref 0) 0x60b00011f490 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011ec50 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c000000160 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c0000000a0 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c000032f20 RESULTS: FAIL: ./test_subscriber.ctrl pass: ./test_subscriber_errors.ctrl make[6]: *** [Makefile:726: ctrl-test] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:697: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:738: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:555: check-am] Error 2 make[2]: *** [Makefile:404: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:487: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:781: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-e1-hardware » software,a1=default,a3=default,a4=default,osmocom-master-debian9 #744
by jenkins＠lists.osmocom.org 04 Nov '22

04 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-e1-hardware/JOB_TYPE=so…> Changes: ------------------------------------------ Started by upstream project "master-osmo-e1-hardware" build number 744 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 osmocom-gerrit repo-install-test coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-osmo-e1-hardware/JOB_TYPE=so…> The recommended git tool is: NONE No credentials specified Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-e1-hardware > git init <https://jenkins.osmocom.org/jenkins/job/master-osmo-e1-hardware/JOB_TYPE=so…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-e1-hardware > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- https://gerrit.osmocom.org/osmo-e1-hardware +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-e1-hardware # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision da46ef882fb3951dc4e04536e8a3126302e71de3 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f da46ef882fb3951dc4e04536e8a3126302e71de3 # timeout=10 Commit message: "gitreview: new file" First time build. Skipping changelog. > git remote # timeout=10 > git submodule init # timeout=10 > git submodule sync # timeout=10 > git config --get remote.origin.url # timeout=10 > git submodule init # timeout=10 > git config -f .gitmodules --get-regexp ^submodule\.(.+)\.url # timeout=10 > git config --get submodule.gateware/build.url # timeout=10 > git config -f .gitmodules --get submodule.gateware/build.path # timeout=10 > git config --get submodule.gateware/cores/no2e1.url # timeout=10 > git config -f .gitmodules --get submodule.gateware/cores/no2e1.path # timeout=10 > git config --get submodule.gateware/cores/no2ice40.url # timeout=10 > git config -f .gitmodules --get submodule.gateware/cores/no2ice40.path # timeout=10 > git config --get submodule.gateware/cores/no2misc.url # timeout=10 > git config -f .gitmodules --get submodule.gateware/cores/no2misc.path # timeout=10 > git config --get submodule.gateware/cores/no2usb.url # timeout=10 > git config -f .gitmodules --get submodule.gateware/cores/no2usb.path # timeout=10 > git submodule update --init --recursive gateware/build # timeout=10 > git submodule update --init --recursive gateware/cores/no2e1 # timeout=10 > git submodule update --init --recursive gateware/cores/no2ice40 # timeout=10 > git submodule update --init --recursive gateware/cores/no2misc # timeout=10 > git submodule update --init --recursive gateware/cores/no2usb # timeout=10 [osmocom-master-debian9] $ /bin/sh -xe /tmp/jenkins5907108448148183562.sh + DOCKER_IMG=osmocom-build/debian-buster-jenkins + ARTIFACT_STORE=/home/osmocom-build/jenkins_build_artifact_store + mkdir -p /home/osmocom-build/jenkins_build_artifact_store + docker run --rm=true --cap-add SYS_PTRACE -e ARTIFACT_STORE=/artifact_store -e ASCIIDOC_WARNINGS_CHECK=1 -e HOME=/build -e JOB_NAME=master-osmo-e1-hardware/JOB_TYPE=software,a1=default,a3=default,a4=default,label=osmocom-master-debian9 -e MAKE=make -e OSMOPY_DEBUG_TCP_SOCKETS=1 -e OSMO_GSM_MANUALS_DIR=/opt/osmo-gsm-manuals -e PARALLEL_MAKE=-j 8 -e PUBLISH=1 -e WITH_MANUALS=1 -w /build -i -u build -v <https://jenkins.osmocom.org/jenkins/job/master-osmo-e1-hardware/JOB_TYPE=so…>:/build -v /home/osmocom-build/jenkins_build_artifact_store:/artifact_store -v /home/osmocom-build/.ssh:/home/build/.ssh:ro -e JOB_TYPE=software osmocom-build/debian-buster-jenkins /usr/bin/timeout 30m /build/contrib/jenkins.sh --publish + chmod -R +w . + git checkout -f HEAD + git clean -dxf + [ -d /build/deps ] + [ -d layer1-headers ] =============== firmware/ice40-riscv/e1-tracer FIRMWARE ============== make: Entering directory '/build/firmware/ice40-riscv/e1-tracer' rm -f *.bin *.hex *.elf *.o *.gen.h /build/gateware/cores/no2usb/fw/usb_gen_strings.py usb_str_app.txt usb_str_app.gen.h e1-tracer riscv-none-embed-gcc -Wall -Wextra -Wno-unused -Os -march=rv32i -mabi=ilp32 -ffreestanding -flto -nostartfiles -fomit-frame-pointer -Wl,--gc-section --specs=nano.specs -DBOARD_E1_TRACER -I. -I../common -I/build/gateware/cores/no2usb/fw/v0/include -Wl,-Bstatic,-T,../common/lnk-app.lds,--strip-debug -o e1_tracer-fw-0.1-144-gda46ef8.elf ../common/../common/start.S ../common/console.c ../common/dma.c ../common/led.c ../common/mini-printf.c ../common/spi.c ../common/utils.c /build/gateware/cores/no2usb/fw/v0/src/usb.c /build/gateware/cores/no2usb/fw/v0/src/usb_ctrl_ep0.c /build/gateware/cores/no2usb/fw/v0/src/usb_ctrl_std.c /build/gateware/cores/no2usb/fw/v0/src/usb_dfu.c /build/gateware/cores/no2usb/fw/v0/src/usb_dfu_rt.c /build/gateware/cores/no2usb/fw/v0/src/usb_dfu_vendor.c /build/gateware/cores/no2usb/fw/v0/src/usb_msos20.c e1.c fw_app.c idt82v2081.c idt82v2081_no2spi.c misc.c usb_desc_app.c usb_e1.c make: Leaving directory '/build/firmware/ice40-riscv/e1-tracer' make: riscv-none-embed-gcc: Command not found make: *** [Makefile:71: e1_tracer-fw-0.1-144-gda46ef8.elf] Error 127 Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-pcu » master,0,rpi4-raspbian11,none,False #5269
by jenkins＠lists.osmocom.org 04 Nov '22

04 Nov '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: [Pau Espin Pedrol] Improve TBF logging [Pau Espin Pedrol] Improve MS logging [Pau Espin Pedrol] Disable logging fsm addresses ------------------------------------------ [...truncated 130.77 KB...] make[2]: Leaving directory '/build/osmo-pcu-1.1.0.61-38a9a/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.1.0.61-38a9a/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-1.1.0.61-38a9a/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-1.1.0.61-38a9a/_build/sub' if test -d "osmo-pcu-1.1.0.61-38a9a"; then find "osmo-pcu-1.1.0.61-38a9a" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.1.0.61-38a9a" || { sleep 5 && rm -rf "osmo-pcu-1.1.0.61-38a9a"; }; else :; fi ========================================================= osmo-pcu-1.1.0.61-38a9a archives ready for distribution: osmo-pcu-1.1.0.61-38a9a.tar.gz osmo-pcu-1.1.0.61-38a9a.tar.bz2 ========================================================= + [ 0 = 1 ] + make -j 4 maintainer-clean Making maintainer-clean in include make[1]: Entering directory '/build/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[1]: Leaving directory '/build/include' Making maintainer-clean in src make[1]: Entering directory '/build/src' rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f osmo-pcu rm -f *.o rm -f *.lo rm -f *.tab.c rm -f osmo-bts-litecell15/*.o rm -f ./so_locations rm -f osmo-bts-oc2g/*.o test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f osmo-bts-sysmo/*.o test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f osmo-bts-litecell15/.deps/.dirstamp rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -f ./.deps/bts.Plo rm -f ./.deps/bts_pch_timer.Plo rm -f ./.deps/coding_scheme.Plo rm -f ./.deps/csn1.Plo rm -f ./.deps/csn1_dec.Plo rm -f ./.deps/csn1_enc.Plo rm -f ./.deps/decoding.Plo rm -f ./.deps/egprs_rlc_compression.Plo rm -f ./.deps/encoding.Plo rm -f ./.deps/gprs_bssgp_pcu.Plo rm -f ./.deps/gprs_bssgp_rim.Plo rm -f ./.deps/gprs_codel.Plo rm -f ./.deps/gprs_debug.Plo rm -f ./.deps/gprs_ms.Plo rm -f ./.deps/gprs_ms_storage.Plo rm -f ./.deps/gprs_pcu.Plo rm -f ./.deps/gprs_rlcmac.Plo rm -f ./.deps/gprs_rlcmac_meas.Plo rm -f ./.deps/gprs_rlcmac_sched.Plo rm -f ./.deps/gprs_rlcmac_ts_alloc.Plo rm -f ./.deps/gsm_rlcmac.Plo rm -f ./.deps/llc.Plo rm -f ./.deps/mslot_class.Plo rm -f ./.deps/nacc_fsm.Plo rm -f ./.deps/neigh_cache.Plo rm -f ./.deps/osmobts_sock.Plo rm -f ./.deps/pcu_l1_if.Plo rm -f ./.deps/pcu_main.Po rm -f ./.deps/pcu_vty.Plo rm -f ./.deps/pcu_vty_functions.Plo rm -f ./.deps/pdch.Plo rm -f ./.deps/pdch_ul_controller.Plo rm -f ./.deps/rlc.Plo rm -f ./.deps/sba.Plo rm -f ./.deps/tbf.Plo rm -f ./.deps/tbf_dl.Plo rm -f ./.deps/tbf_dl_ass_fsm.Plo rm -f ./.deps/tbf_fsm.Plo rm -f ./.deps/tbf_ul.Plo rm -f ./.deps/tbf_ul_ack_fsm.Plo rm -f ./.deps/tbf_ul_ass_fsm.Plo rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po rm -f osmo-bts-litecell15/.deps/lc15bts.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po rm -f osmo-bts-oc2g/.deps/oc2gbts.Po rm -f osmo-bts-sysmo/.deps/femtobts.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po rm -f Makefile make[1]: Leaving directory '/build/src' Making maintainer-clean in doc make[1]: Entering directory '/build/doc' Making maintainer-clean in examples make[2]: Entering directory '/build/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f This command is intended for maintainers to use test . = "." || test -z "" || rm -f it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/examples' Making maintainer-clean in manuals make[2]: Entering directory '/build/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/manuals' make[2]: Entering directory '/build/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. make[2]: Leaving directory '/build/doc' rm -f Makefile make[1]: Leaving directory '/build/doc' Making maintainer-clean in tests make[1]: Entering directory '/build/tests' rm -rf .libs _libs test ! -f './testsuite' || \ /bin/bash './testsuite' --clean rm -rf alloc/.libs alloc/_libs rm -f emu/pcu_emu rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest rm -rf app_info/.libs app_info/_libs rm -f *.o rm -f *.lo rm -rf bitcomp/.libs bitcomp/_libs rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f rm -rf codel/.libs codel/_libs rm -f alloc/.dirstamp rm -rf edge/.libs edge/_libs rm -f app_info/.dirstamp This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -rf emu/.libs emu/_libs rm -f bitcomp/.dirstamp rm -f codel/.dirstamp rm -f edge/.dirstamp rm -f emu/.dirstamp rm -rf fn/.libs fn/_libs rm -rf llc/.libs llc/_libs rm -f fn/.dirstamp rm -rf llist/.libs llist/_libs rm -f llc/.dirstamp rm -f llist/.dirstamp rm -rf ms/.libs ms/_libs rm -f ms/.dirstamp rm -rf rlcmac/.libs rlcmac/_libs rm -f rlcmac/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f tbf/.dirstamp rm -rf types/.libs types/_libs rm -f types/.dirstamp rm -rf ulc/.libs ulc/_libs rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig rm -f ./.deps/AllocTest.Po rm -f ./.deps/AppInfoTest.Po rm -f ./.deps/BitcompTest.Po rm -f ./.deps/EdgeTest.Po rm -f ./.deps/FnTest.Po rm -f ./.deps/LListTest.Po rm -f ./.deps/LlcTest.Po rm -f ./.deps/MsTest.Po rm -f ./.deps/MslotTest.Po rm -f ./.deps/PdchUlcTest.Po rm -f ./.deps/RLCMACTest.Po rm -f ./.deps/TbfTest.Po rm -f ./.deps/TypesTest.Po rm -f ./.deps/codel_test.Po rm -f ./.deps/egprs_rlc_compression.Po rm -f ./.deps/openbsc_clone.Po rm -f ./.deps/pcu_emu.Po rm -f ./.deps/test_pdp_activation.Po rm -f ./.deps/test_replay_gprs_attach.Po rm -f Makefile make[1]: Leaving directory '/build/tests' Making maintainer-clean in contrib make[1]: Entering directory '/build/contrib' Making maintainer-clean in systemd make[2]: Entering directory '/build/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f This command is intended for maintainers to use test . = "." || test -z "" || rm -f it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/contrib/systemd' make[2]: Entering directory '/build/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-pcu.spec" || rm -f osmo-pcu.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. make[2]: Leaving directory '/build/contrib' rm -f Makefile make[1]: Leaving directory '/build/contrib' make[1]: Entering directory '/build' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt test . = "." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags This command is intended for maintainers to use rm -f cscope.out cscope.in.out cscope.po.out cscope.files it deletes files that may require special tools to rebuild. test -z "./.version" || rm -f ./.version make[1]: Leaving directory '/build' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -rf ./autom4te.cache rm -f Makefile + osmo-clean-workspace.sh + chmod -R +w . + git checkout -f HEAD Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications November 2022