February 2021 - jenkins-notifications

Build failed in Jenkins: Coverity-Upload (jenkins-job-builder) #1143

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/1143/display/redir…> Changes: ------------------------------------------ [...truncated 1.61 MB...] config.status: creating Makefile config.status: executing depfiles commands make -C host/trxcon make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' echo 0.0.0 > .version-t && mv .version-t .version make all-am make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' CC l1ctl_link.o CC l1ctl.o CC trx_if.o CC logging.o CC trxcon.o CC sched_lchan_common.o CC sched_lchan_pdtch.o CC sched_lchan_desc.o CC sched_lchan_xcch.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC sched_lchan_rach.o CC sched_lchan_sch.o CC sched_mframe.o CC sched_clck.o CC sched_prim.o CC sched_trx.o CCLD trxcon make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' cd host/gsmmap && autoreconf -i configure.ac:13: installing './compile' configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' Makefile.am:10: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Makefile.am:15: warning: source file '../layer23/src/common/sysinfo.c' is in a subdirectory, Makefile.am:15: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Makefile.am:15: warning: source file '../layer23/src/common/networks.c' is in a subdirectory, Makefile.am:15: but option 'subdir-objects' is disabled Makefile.am:15: warning: source file '../layer23/src/common/logging.c' is in a subdirectory, Makefile.am:15: but option 'subdir-objects' is disabled Makefile.am: installing './depcomp' cd host/gsmmap && ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands make -C host/gsmmap make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' echo 0.0.0.2584-5c3c > .version-t && mv .version-t .version make all-am make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' CC gsmmap.o gsmmap.c:22:2: warning: #warning todo bsic [-Wcpp] #warning todo bsic ^~~~~~~ CC geo.o CC locate.o CC log.o CC sysinfo.o CC networks.o CC logging.o CCLD gsmmap make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' cd host/gprsdecode && autoreconf -i configure.ac:13: installing './compile' configure.ac:3: installing './install-sh' configure.ac:3: installing './missing' Makefile.am: installing './depcomp' cd host/gprsdecode && ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for ranlib... ranlib checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCODING... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating tests/Makefile config.status: executing tests/atconfig commands config.status: executing depfiles commands make -C host/gprsdecode make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' Making all in tests make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode/tests' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode/tests' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' CC gsmtap.o CC rlcmac.o CC gprs.o CC main.o CCLD gprsdecode make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' cd host/virt_phy && autoreconf -i configure.ac:11: installing './compile' configure.ac:4: installing './install-sh' configure.ac:4: installing './missing' src/Makefile.am: installing './depcomp' cd host/virt_phy && ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands make -C host/virt_phy make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make all-recursive make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' Making all in include make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/include' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/include' Making all in src make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/src' CC virtphy.o CC l1ctl_sock.o CC gsmtapl1_if.o CC l1ctl_sap.o l1ctl_sap.c:599:12: warning: ‘get_osmo_cs_by_l1ctl’ defined but not used [-Wunused-function] static int get_osmo_cs_by_l1ctl(enum l1ctl_coding_scheme l1) ^~~~~~~~~~~~~~~~~~~~ CC virt_prim_pm.o CC virt_prim_fbsb.o CC virt_prim_rach.o CC virt_prim_data.o CC virt_prim_traffic.o CC virt_l1_sched_simple.o CC logging.o CC virt_l1_model.o CC shared/virtual_um.o CC shared/osmo_mcast_sock.o CCLD virtphy $AM_CPPFLAGS is [ -I../include -I../../layer23/include] make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/src' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' + popd ~/osmo-ci/coverity/source-Osmocom Emitted 2723 C/C++ compilation units (100%) successfully 2723 C/C++ compilation units (100%) are ready for analysis The cov-build utility completed successfully. + cd /home/osmocom-build/osmo-ci/coverity/source-Osmocom + rm -f Osmocom.tgz + tar czf Osmocom.tgz cov-int + set +x curl \ --form token="$token" \ --form email=holger(a)freyther.de --form file=(a)Osmocom.tgz \ --form version=Version --form description=AutoUpload \ https://scan.coverity.com/builds?project=Osmocom % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:02 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:03 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:04 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:05 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:06 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:07 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:08 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:09 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:10 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:11 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:12 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:13 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:14 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:15 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:16 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:17 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:18 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:19 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:20 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:21 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:22 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:23 --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- 0:00:24 --:--:-- 0curl: (6) Could not resolve host: scan.coverity.com Build step 'Execute shell' marked build as failure

4 years, 4 months

1
1
0 0

Build failed in Jenkins: Osmocom_OBS_nightly #795

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/795/display/red…> Changes: ------------------------------------------ [...truncated 27.76 KB...] + local name=osmo-ggsn + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-ggsn ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-ggsn + url=https://gerrit.osmocom.org/osmo-ggsn + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-ggsn + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:31 + git clone https://gerrit.osmocom.org/osmo-ggsn Cloning into 'osmo-ggsn'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-sgsn + local name=osmo-sgsn + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-sgsn ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-sgsn + url=https://gerrit.osmocom.org/osmo-sgsn + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-sgsn + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:31 + git clone https://gerrit.osmocom.org/osmo-sgsn Cloning into 'osmo-sgsn'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-pcap + local name=osmo-pcap + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-pcap ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-pcap + url=https://gerrit.osmocom.org/osmo-pcap + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-pcap + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:32 + git clone https://gerrit.osmocom.org/osmo-pcap Cloning into 'osmo-pcap'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-trx + local name=osmo-trx + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-trx ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-trx + url=https://gerrit.osmocom.org/osmo-trx + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-trx + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:32 + git clone https://gerrit.osmocom.org/osmo-trx Cloning into 'osmo-trx'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-sip-connector + local name=osmo-sip-connector + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-sip-connector ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-sip-connector + url=https://gerrit.osmocom.org/osmo-sip-connector + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-sip-connector + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:32 + git clone https://gerrit.osmocom.org/osmo-sip-connector Cloning into 'osmo-sip-connector'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-bts + local name=osmo-bts + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-bts ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-bts + url=https://gerrit.osmocom.org/osmo-bts + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-bts + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:32 + git clone https://gerrit.osmocom.org/osmo-bts Cloning into 'osmo-bts'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-pcu + local name=osmo-pcu + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-pcu ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-pcu + url=https://gerrit.osmocom.org/osmo-pcu + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-pcu + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:33 + git clone https://gerrit.osmocom.org/osmo-pcu Cloning into 'osmo-pcu'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-hlr + local name=osmo-hlr + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-hlr ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-hlr + url=https://gerrit.osmocom.org/osmo-hlr + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-hlr + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:34 + git clone https://gerrit.osmocom.org/osmo-hlr Cloning into 'osmo-hlr'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-mgw + local name=osmo-mgw + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-mgw ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-mgw + url=https://gerrit.osmocom.org/osmo-mgw + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-mgw + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:34 + git clone https://gerrit.osmocom.org/osmo-mgw Cloning into 'osmo-mgw'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-msc + local name=osmo-msc + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-msc ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-msc + url=https://gerrit.osmocom.org/osmo-msc + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-msc + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:35 + git clone https://gerrit.osmocom.org/osmo-msc Cloning into 'osmo-msc'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout osmo-bsc + local name=osmo-bsc + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url osmo-bsc ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-bsc + url=https://gerrit.osmocom.org/osmo-bsc + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/osmo-bsc + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:36 + git clone https://gerrit.osmocom.org/osmo-bsc Cloning into 'osmo-bsc'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout python/osmo-python-tests + local name=python/osmo-python-tests + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url python/osmo-python-tests ++ case "$1" in ++ echo https://gerrit.osmocom.org/python/osmo-python-tests + url=https://gerrit.osmocom.org/python/osmo-python-tests + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://gerrit.osmocom.org/python/osmo-python-tests + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:37 + git clone https://gerrit.osmocom.org/python/osmo-python-tests Cloning into 'osmo-python-tests'... + '[' nightly = next ']' + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + checkout rtl-sdr + local name=rtl-sdr + local url= + local branch= + '[' -z '' ']' ++ osmo_git_clone_url rtl-sdr ++ case "$1" in ++ echo https://git.osmocom.org/rtl-sdr + url=https://git.osmocom.org/rtl-sdr + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…> + '[' -n '' ']' + osmo_git_clone_date https://git.osmocom.org/rtl-sdr + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:38 + git clone https://git.osmocom.org/rtl-sdr Cloning into 'rtl-sdr'... error: garbage at end of loose object '6bbbb452a5cf460a44c4f74a438831ff725103ad' fatal: loose object 6bbbb452a5cf460a44c4f74a438831ff725103ad (stored in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_E…)> is corrupt + date '+%Y-%m-%d %H:%M:%S' 2021-02-21 01:27:40 + exit 1 Build step 'Execute shell' marked build as failure

4 years, 4 months

1
1
0 0

Build failed in Jenkins: Osmocom-repo-install-debian9 » nightly,repo-install-test #25

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian9/feed=n…> Changes: ------------------------------------------ [...truncated 348.47 KB...] Feb 17 10:43:53 ea033645555f osmo-pcap-client[15461]: <0005> telnet_interface.c:104 Available via telnet 127.0.0.1 4237 Feb 17 10:43:53 ea033645555f systemd[1]: osmo-pcap-client.service: Failed to reset devices.list: Operation not permitted Feb 17 10:43:53 ea033645555f systemd[1]: Started PCAP Client for the PCAP aggregation. Feb 17 10:43:53 ea033645555f osmo-pcap-client[15461]: <0001> osmo_client_network.c:78 Lost connection on read conn=default Feb 17 10:43:55 ea033645555f osmo-pcap-client[15461]: <0001> osmo_client_network.c:78 Lost connection on read conn=default + systemctl --no-pager -l -n 200 status osmo-sip-connector ● osmo-sip-connector.service - Osmo SIP Connector Loaded: loaded (/lib/systemd/system/osmo-sip-connector.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2021-02-17 10:43:53 UTC; 2s ago Main PID: 15462 (osmo-sip-connec) Tasks: 1 (limit: 4915) CGroup: /docker/ea033645555f84c2eb962f8786c25ff0275716b9d1d8b5ae767673da0fd08527/system.slice/osmo-sip-connector.service └─15462 /usr/bin/osmo-sip-connector -c /etc/osmocom/osmo-sip-connector.cfg Feb 17 10:43:53 ea033645555f osmo-sip-connector[15462]: <0004> telnet_interface.c:104 Available via telnet 127.0.0.1 4256 Feb 17 10:43:53 ea033645555f osmo-sip-connector[15462]: <0001> mncc.c:1054 Scheduling MNCC connect Feb 17 10:43:53 ea033645555f osmo-sip-connector[15462]: <0000> sip.c:679 su_source_port_create() returns 0x5650e33fab60 Feb 17 10:43:53 ea033645555f systemd[1]: osmo-sip-connector.service: Failed to reset devices.list: Operation not permitted Feb 17 10:43:53 ea033645555f osmo-sip-connector[15462]: <0001> mncc.c:946 Failed to connect(/tmp/msc_mncc). Retrying Feb 17 10:43:53 ea033645555f systemd[1]: Started Osmo SIP Connector. + systemctl --no-pager -l -n 200 status osmo-stp ● osmo-stp.service - Osmocom STP (Signal Transfer Point) Loaded: loaded (/lib/systemd/system/osmo-stp.service; disabled; vendor preset: enabled) Active: active (running) since Wed 2021-02-17 10:43:53 UTC; 2s ago Docs: https://osmocom.org/projects/osmo-stp/wiki Main PID: 15463 (osmo-stp) Tasks: 1 (limit: 4915) CGroup: /docker/ea033645555f84c2eb962f8786c25ff0275716b9d1d8b5ae767673da0fd08527/system.slice/osmo-stp.service └─15463 /usr/bin/osmo-stp -c /etc/osmocom/osmo-stp.cfg Feb 17 10:43:53 ea033645555f systemd[1]: osmo-stp.service: Failed to reset devices.list: Operation not permitted Feb 17 10:43:53 ea033645555f systemd[1]: Started Osmocom STP (Signal Transfer Point). Feb 17 10:43:53 ea033645555f osmo-stp[15463]: DLGLOBAL <0000> telnet_interface.c:104 Available via telnet 127.0.0.1 4239 Feb 17 10:43:53 ea033645555f osmo-stp[15463]: DLSS7 <000c> osmo_ss7.c:1495 0: asp-asp-dyn-0: ASP Restart for server not implemented yet! Feb 17 10:43:53 ea033645555f osmo-stp[15463]: DLSS7 <000c> osmo_ss7.c:1495 0: asp-asp-dyn-1: ASP Restart for server not implemented yet! Feb 17 10:43:53 ea033645555f osmo-stp[15463]: DLSS7 <000c> osmo_ss7.c:1495 0: asp-asp-dyn-2: ASP Restart for server not implemented yet! + systemctl --no-pager -l -n 200 status osmo-pcap-server ● osmo-pcap-server.service - PCAP Server for the PCAP aggregation Loaded: loaded (/lib/systemd/system/osmo-pcap-server.service; disabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2021-02-17 10:43:55 UTC; 43ms ago Process: 15471 ExecStart=/usr/bin/osmo-pcap-server -c /etc/osmocom/osmo-pcap-server.cfg (code=exited, status=1/FAILURE) Main PID: 15471 (code=exited, status=1/FAILURE) Feb 17 10:43:55 ea033645555f osmo-pcap-server[15471]: <0005> socket.c:912 unable to bind socket:127.0.0.1:4238: Address already in use Feb 17 10:43:55 ea033645555f osmo-pcap-server[15471]: <0005> socket.c:923 no suitable addr found for: 127.0.0.1:4238 Feb 17 10:43:55 ea033645555f osmo-pcap-server[15471]: <0005> telnet_interface.c:100 Cannot bind telnet at 127.0.0.1 4238 Feb 17 10:43:55 ea033645555f osmo-pcap-server[15471]: <0001> osmo_server_main.c:233 Failed to bind telnet interface Feb 17 10:43:55 ea033645555f systemd[1]: Stopped PCAP Server for the PCAP aggregation. Feb 17 10:43:55 ea033645555f osmo-pcap-server[15471]: Feb 17 10:43:55 ea033645555f systemd[1]: osmo-pcap-server.service: Failed to reset devices.list: Operation not permitted Feb 17 10:43:55 ea033645555f systemd[1]: Started PCAP Server for the PCAP aggregation. Feb 17 10:43:55 ea033645555f systemd[1]: osmo-pcap-server.service: Main process exited, code=exited, status=1/FAILURE Feb 17 10:43:55 ea033645555f systemd[1]: osmo-pcap-server.service: Unit entered failed state. Feb 17 10:43:55 ea033645555f systemd[1]: osmo-pcap-server.service: Failed with result 'exit-code'. + failed= osmo-pcap-server + systemctl --no-pager -l -n 200 status osmo-sgsn ● osmo-sgsn.service - Osmocom SGSN (Serving GPRS Support Node) Loaded: loaded (/lib/systemd/system/osmo-sgsn.service; disabled; vendor preset: enabled) Active: active (running) since Wed 2021-02-17 10:43:53 UTC; 2s ago Main PID: 15467 (osmo-sgsn) Tasks: 1 (limit: 4915) CGroup: /docker/ea033645555f84c2eb962f8786c25ff0275716b9d1d8b5ae767673da0fd08527/system.slice/osmo-sgsn.service └─15467 /usr/bin/osmo-sgsn -c /etc/osmocom/osmo-sgsn.cfg Feb 17 10:43:53 ea033645555f systemd[1]: Started Osmocom SGSN (Serving GPRS Support Node). Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0014> telnet_interface.c:104 Available via telnet 127.0.0.1 4245 Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <001b> control_if.c:916 CTRL at 127.0.0.1 4251 Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <001c> gtp.c:902 GTP: gtp_newgsn() started at 127.0.0.1 Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <001c> gtp.c:859 State information file (.//gsn_restart) not found. Creating new file. Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0004> sgsn_libgtp.c:777 Created GTP on 127.0.0.1 Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0004> sgsn_main.c:447 libGTP v1.6.0.16-02a8 initialized Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <001e> gsup_client.c:75 GSUP connecting to 127.0.0.1:4222 Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:521 OsmoSGSN: Creating SS7 instance Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:548 OsmoSGSN: Using SS7 instance 0, pc:0.23.4 Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:555 OsmoSGSN: Creating AS instance Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:566 OsmoSGSN: Using AS instance as-clnt-OsmoSGSN Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:571 OsmoSGSN: Creating default route Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:611 OsmoSGSN: No unassociated ASP for m3ua, creating new ASP asp-clnt-OsmoSGSN Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0021> sccp_user.c:638 OsmoSGSN: Using ASP instance asp-clnt-OsmoSGSN Feb 17 10:43:53 ea033645555f osmo-sgsn[15467]: <0020> osmo_ss7.c:447 0: Creating SCCP instance Feb 17 10:43:54 ea033645555f osmo-sgsn[15467]: <001e> gsup_client.c:75 GSUP connecting to 127.0.0.1:4222 Feb 17 10:43:54 ea033645555f osmo-sgsn[15467]: <0016> input/ipa.c:128 127.0.0.1:4222 connection done Feb 17 10:43:54 ea033645555f osmo-sgsn[15467]: <0016> input/ipaccess.c:895 received ID_GET for unit ID 0/0/0 Feb 17 10:43:55 ea033645555f osmo-sgsn[15467]: <0023> m3ua.c:622 0: asp-asp-clnt-OsmoSGSN: Received NOTIFY Type State Change:AS Inactive () Feb 17 10:43:55 ea033645555f osmo-sgsn[15467]: <0020> xua_default_lm_fsm.c:354 xua_default_lm(asp-clnt-OsmoSGSN)[0x555d233c8d20]{ACTIVE}: Ignoring primitive M-ASP_ACTIVE.confirm Feb 17 10:43:55 ea033645555f osmo-sgsn[15467]: <0023> m3ua.c:622 0: asp-asp-clnt-OsmoSGSN: Received NOTIFY Type State Change:AS Active () + systemctl --no-pager -l -n 200 status osmo-pcu ● osmo-pcu.service - Osmocom osmo-pcu Loaded: loaded (/lib/systemd/system/osmo-pcu.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2021-02-17 10:43:53 UTC; 2s ago Main PID: 15466 (osmo-pcu) Tasks: 1 (limit: 4915) CGroup: /docker/ea033645555f84c2eb962f8786c25ff0275716b9d1d8b5ae767673da0fd08527/system.slice/osmo-pcu.service └─15466 /usr/bin/osmo-pcu -c /etc/osmocom/osmo-pcu.cfg Feb 17 10:43:53 ea033645555f systemd[1]: Started Osmocom osmo-pcu. Feb 17 10:43:53 ea033645555f osmo-pcu[15466]: <000f> telnet_interface.c:104 Available via telnet 127.0.0.1 4240 Feb 17 10:43:53 ea033645555f osmo-pcu[15466]: <0001> osmobts_sock.c:234 osmo-bts PCU socket /tmp/pcu_bts has been connected Feb 17 10:43:53 ea033645555f osmo-pcu[15466]: <0001> pcu_l1_if.cpp:901 Received message for new BTS0 Feb 17 10:43:53 ea033645555f osmo-pcu[15466]: <0001> pcu_l1_if.cpp:606 BTS not available + systemctl --no-pager -l -n 200 status osmo-hnbgw ● osmo-hnbgw.service - Osmocom Home Nodeb Gateway (OsmoHNBGW) Loaded: loaded (/lib/systemd/system/osmo-hnbgw.service; disabled; vendor preset: enabled) Active: active (running) since Wed 2021-02-17 10:43:53 UTC; 2s ago Main PID: 15465 (osmo-hnbgw) Tasks: 1 (limit: 4915) CGroup: /docker/ea033645555f84c2eb962f8786c25ff0275716b9d1d8b5ae767673da0fd08527/system.slice/osmo-hnbgw.service └─15465 /usr/bin/osmo-hnbgw -c /etc/osmocom/osmo-hnbgw.cfg Feb 17 10:43:53 ea033645555f systemd[1]: Started Osmocom Home Nodeb Gateway (OsmoHNBGW). Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLGLOBAL <0004> telnet_interface.c:104 Available via telnet 127.0.0.1 4261 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLCTRL <000b> control_if.c:916 CTRL at 127.0.0.1 4262 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DMAIN <0000> hnbgw_cn.c:461 IuCS remote addr not configured, using default: RI=SSN_PC,PC=0.23.1,SSN=RANAP Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DMAIN <0000> hnbgw_cn.c:461 IuPS remote addr not configured, using default: RI=SSN_PC,PC=0.23.4,SSN=RANAP Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DRANAP <0003> hnbgw_cn.c:512 No cs7 instance configured for IuCS nor IuPS, creating default instance Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:376 0: Creating SS7 Instance Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:676 0: Creating Route Table system Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DRANAP <0003> hnbgw_cn.c:525 Local SCCP addr: RI=SSN_PC,PC=0.23.5,SSN=RANAP Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:548 OsmoHNBGW: Using SS7 instance 0, pc:0.23.5 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:555 OsmoHNBGW: Creating AS instance Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> fsm.c:461 XUA_AS(as-clnt-OsmoHNBGW)[0x564a93ec6f40]{AS_DOWN}: Allocated Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:978 0: as-as-clnt-OsmoHNBGW: Created AS Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:566 OsmoHNBGW: Using AS instance as-clnt-OsmoHNBGW Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:571 OsmoHNBGW: Creating default route Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:800 0: Creating route: pc=0=0.0.0 mask=0x0 via AS 'as-clnt-OsmoHNBGW' Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:611 OsmoHNBGW: No unassociated ASP for m3ua, creating new ASP asp-clnt-OsmoHNBGW Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:998 0: as-as-clnt-OsmoHNBGW: Adding ASP asp-clnt-OsmoHNBGW to AS Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> fsm.c:461 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{IDLE}: Allocated Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:1447 0: asp-asp-clnt-OsmoHNBGW: Restarting ASP asp-clnt-OsmoHNBGW, r=localhost:2905<->l=localhost:0 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> fsm.c:461 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_DOWN}: Allocated Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:638 OsmoHNBGW: Using ASP instance asp-clnt-OsmoHNBGW Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:447 0: Creating SCCP instance Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:107 Binding user 'SCCP Maangement' to SSN=1 PC=(no PC) Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:471 registering user=SCCP for SI 3 with priv 0x564a93ecb2b0 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSCCP <0011> sccp_user.c:107 Binding user 'OsmoHNBGW' to SSN=142 PC=0.23.5 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DRANAP <0003> hnbgw_cn.c:550 Remote SCCP addr: IuCS: RI=SSN_PC,PC=0.23.1,SSN=RANAP Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DRANAP <0003> hnbgw_cn.c:552 Remote SCCP addr: IuPS: RI=SSN_PC,PC=0.23.4,SSN=RANAP Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DHNBAP <0001> hnbgw.c:624 Using RNC-Id 23 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DMAIN <0000> hnbgw.c:629 Listening for Iuh at 0.0.0.0 29169 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:396 [CONNECTING] osmo_stream_cli_fd_cb(): connection done. Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:114 sizes of 'struct sctp_event_subscribe': compile-time 10, kernel: 13 Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:1706 0: asp-asp-clnt-OsmoHNBGW: Client connected (r=::1:2905<->l=::1:52831) Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{IDLE}: Received primitive M-SCTP_ESTABLISH.indication Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{IDLE}: Received Event SCTP-ESTABLISH.ind Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:142 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{IDLE}: state_chg to WAIT_ASP_UP Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:143 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_DOWN}: Received Event M-ASP_UP.req Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:350 [CONNECTED] osmo_stream_cli_write(): sending 8 bytes of data Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 8 (flags=0x80) Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (ASPSM:UP-ACK) Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> m3ua.c:674 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_DOWN}: Received Event ASPSM-ASP_UP_ACK Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_asp_fsm.c:352 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_DOWN}: T(ack) stopped Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_asp_fsm.c:401 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_DOWN}: state_chg to ASP_INACTIVE Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_asp_fsm.c:450 XUA_AS(as-clnt-OsmoHNBGW)[0x564a93ec6f40]{AS_DOWN}: Received Event ASPAS-ASP_INACTIVE.ind Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_as_fsm.c:289 XUA_AS(as-clnt-OsmoHNBGW)[0x564a93ec6f40]{AS_DOWN}: state_chg to AS_INACTIVE Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_ASP_UP}: Received primitive M-ASP_UP.confirm Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_ASP_UP}: Received Event ASP-UP.conf Feb 17 10:43:53 ea033645555f osmo-hnbgw[15465]: 20210217104353234 DLSS7 <0010> xua_default_lm_fsm.c:154 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_ASP_UP}: state_chg to WAIT_NOTIFY Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355105 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355105 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355105 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 148 (flags=0x8080) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355105 DLSS7 <0010> osmo_ss7.c:1575 0: asp-asp-clnt-OsmoHNBGW: xUA CLNT SCTP NOTIFICATION 32770 flags=0x0 Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355105 DLSS7 <0010> osmo_ss7.c:1588 0: asp-asp-clnt-OsmoHNBGW: xUA CLNT PEER_ADDR_CHANGE Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLSS7 <0010> fsm.c:322 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_NOTIFY}: Timeout of T1 Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLSS7 <0010> xua_default_lm_fsm.c:176 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_NOTIFY}: state_chg to RKM_REG Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLSS7 <0010> xua_rkm.c:559 0: asp-asp-clnt-OsmoHNBGW: Received XUA Layer Manager Primitive: M-RK_REG.request) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLINP <0006> stream.c:350 [CONNECTED] osmo_stream_cli_write(): sending 44 bytes of data Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355234 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 36 (flags=0x80) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (RKM:REG-RESP) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_rkm.c:435 0: asp-asp-clnt-OsmoHNBGW: Received RKM REG RES rctx=1 status=SUCCESS Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{RKM_REG}: Received primitive M-RK_REG.confirm Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{RKM_REG}: Received Event RKM_REG.conf Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:249 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{RKM_REG}: state_chg to WAIT_NOTIFY Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (MGMT:NOTIFY) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLM3UA <0013> m3ua.c:622 0: asp-asp-clnt-OsmoHNBGW: Received NOTIFY Type State Change:AS Inactive () Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_NOTIFY}: Received primitive M-NOTIFY.indication Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_NOTIFY}: Received Event NOTIFY.ind Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:215 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{WAIT_NOTIFY}: state_chg to ACTIVE Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:216 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_INACTIVE}: Received Event M-ASP_ACTIVE.req Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:350 [CONNECTED] osmo_stream_cli_write(): sending 16 bytes of data Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 16 (flags=0x80) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (ASPTM:ACTIVE-ACK) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> m3ua.c:674 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_INACTIVE}: Received Event ASPTM-ASP_AC_ACK Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_asp_fsm.c:352 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_INACTIVE}: T(ack) stopped Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_asp_fsm.c:484 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564a93ecaf90]{ASP_INACTIVE}: state_chg to ASP_ACTIVE Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_asp_fsm.c:450 XUA_AS(as-clnt-OsmoHNBGW)[0x564a93ec6f40]{AS_INACTIVE}: Received Event ASPAS-ASP_ACTIVE.ind Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_as_fsm.c:369 XUA_AS(as-clnt-OsmoHNBGW)[0x564a93ec6f40]{AS_INACTIVE}: state_chg to AS_ACTIVE Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{ACTIVE}: Received primitive M-ASP_ACTIVE.confirm Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:354 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{ACTIVE}: Ignoring primitive M-ASP_ACTIVE.confirm Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (MGMT:NOTIFY) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLM3UA <0013> m3ua.c:622 0: asp-asp-clnt-OsmoHNBGW: Received NOTIFY Type State Change:AS Active () Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{ACTIVE}: Received primitive M-NOTIFY.indication Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355235 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564a93ec7490]{ACTIVE}: Received Event NOTIFY.ind Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (SNM:DAVA) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLM3UA <0013> xua_snm.c:356 0: asp-asp-clnt-OsmoHNBGW: Rx DAVA() for 0.23.4/0, Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLSCCP <0011> sccp_user.c:175 Delivering N-PCSTATE.indication to SCCP User 'SCCP Maangement' Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLSCCP <0011> sccp_scmg.c:299 unsupported SCCP user primitive N-PCSTATE.indication Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DLSCCP <0011> sccp_user.c:175 Delivering N-PCSTATE.indication to SCCP User 'OsmoHNBGW' Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DMAIN <0000> hnbgw_cn.c:401 sccp_sap_up(N-PCSTATE.indication) Feb 17 10:43:55 ea033645555f osmo-hnbgw[15465]: 20210217104355240 DMAIN <0000> hnbgw_cn.c:434 Received unknown prim 2562 from SCCP USER SAP + systemctl --no-pager -l -n 200 status osmo-bts-virtual ● osmo-bts-virtual.service - Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP Loaded: loaded (/lib/systemd/system/osmo-bts-virtual.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2021-02-17 10:43:53 UTC; 2s ago Main PID: 15464 (osmo-bts-virtua) Tasks: 1 (limit: 4915) CGroup: /docker/ea033645555f84c2eb962f8786c25ff0275716b9d1d8b5ae767673da0fd08527/system.slice/osmo-bts-virtual.service └─15464 /usr/bin/osmo-bts-virtual -s -c /etc/osmocom/osmo-bts-virtual.cfg Feb 17 10:43:53 ea033645555f systemd[1]: osmo-bts-virtual.service: Failed to reset devices.list: Operation not permitted Feb 17 10:43:53 ea033645555f systemd[1]: Started Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP. Feb 17 10:43:53 ea033645555f osmo-bts-virtual[15464]: ((*)) Feb 17 10:43:53 ea033645555f osmo-bts-virtual[15464]: | Feb 17 10:43:53 ea033645555f osmo-bts-virtual[15464]: / \ OsmoBTS Feb 17 10:43:53 ea033645555f osmo-bts-virtual[15464]: % Command 'uplink-power-target <-110-0>' has been deprecated. Feb 17 10:43:53 ea033645555f osmo-bts-virtual[15464]: % MS/BS Power control parameters should be configured in osmo-bsc: use 'rxlev-thresh lower 35 upper 35'. + systemctl stop osmo-bsc osmo-gbproxy osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + [ -n osmo-pcap-server ] + set +x ERROR: services failed to start: osmo-pcap-server + ret=1 + [ -n ] + docker container kill debian9-repo-install-test-nightly debian9-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

4 years, 4 months

1
1
0 0

Build failed in Jenkins: Osmocom-repo-install-debian10 » nightly,repo-install-test #18

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian10/feed=…> Changes: ------------------------------------------ [...truncated 38.33 KB...] Preparing to unpack .../06-libosmocoding0_1.4.0.487.c318_amd64.deb ... Unpacking libosmocoding0:amd64 (1.4.0.487.c318) ... Selecting previously unselected package libosmovty4:amd64. Preparing to unpack .../07-libosmovty4_1.4.0.487.c318_amd64.deb ... Unpacking libosmovty4:amd64 (1.4.0.487.c318) ... Selecting previously unselected package libosmogb11:amd64. Preparing to unpack .../08-libosmogb11_1.4.0.487.c318_amd64.deb ... Unpacking libosmogb11:amd64 (1.4.0.487.c318) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../09-libosmoctrl0_1.4.0.487.c318_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.4.0.487.c318) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../10-libpcsclite1_1.8.24-1_amd64.deb ... Unpacking libpcsclite1:amd64 (1.8.24-1) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../11-libosmosim2_1.4.0.487.c318_amd64.deb ... Unpacking libosmosim2:amd64 (1.4.0.487.c318) ... Selecting previously unselected package libusb-1.0-0:amd64. Preparing to unpack .../12-libusb-1.0-0_2%3a1.0.22-2_amd64.deb ... Unpacking libusb-1.0-0:amd64 (2:1.0.22-2) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../13-libosmousb0_1.4.0.487.c318_amd64.deb ... Unpacking libosmousb0:amd64 (1.4.0.487.c318) ... Selecting previously unselected package libosmocore. Preparing to unpack .../14-libosmocore_1.4.0.487.c318_amd64.deb ... Unpacking libosmocore (1.4.0.487.c318) ... Setting up osmocom-nightly (1.0.0.202102110126) ... Setting up libtalloc2:amd64 (2.1.14-2) ... Setting up libpcsclite1:amd64 (1.8.24-1) ... Setting up libsctp1:amd64 (1.0.18+dfsg-1) ... Setting up libusb-1.0-0:amd64 (2:1.0.22-2) ... Setting up libosmocore16:amd64 (1.4.0.487.c318) ... Setting up libosmousb0:amd64 (1.4.0.487.c318) ... Setting up libosmocodec0:amd64 (1.4.0.487.c318) ... Setting up libosmovty4:amd64 (1.4.0.487.c318) ... Setting up libosmogsm15:amd64 (1.4.0.487.c318) ... Setting up libosmocoding0:amd64 (1.4.0.487.c318) ... Setting up libosmosim2:amd64 (1.4.0.487.c318) ... Setting up libosmogb11:amd64 (1.4.0.487.c318) ... Setting up libosmoctrl0:amd64 (1.4.0.487.c318) ... Setting up libosmocore (1.4.0.487.c318) ... Processing triggers for libc-bin (2.28-10) ... + configure_osmocom_repo_debian_remove network:osmocom:nightly + local proj=network:osmocom:nightly + rm /etc/apt/sources.list.d/network:osmocom:nightly.list + configure_osmocom_repo_debian network:osmocom:latest + local proj=network:osmocom:latest + proj_with_slashes network:osmocom:latest + echo network:osmocom:latest + sed s.:.:/.g + local obs_repo=download.opensuse.org/repositories/network:/osmocom:/latest/Debian… + local release_key=/var/cache/apt/network:osmocom:latest_Release.key + echo Configuring Osmocom repository Configuring Osmocom repository + echo deb http://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_1… ./ + [ -e /var/cache/apt/network:osmocom:latest_Release.key ] + apt install -y wget WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... wget is already the newest version (1.20.1-1.1). 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. + wget -O /var/cache/apt/network:osmocom:latest_Release.key https://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_… --2021-02-11 10:38:31-- https://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_… Resolving download.opensuse.org (download.opensuse.org)... 195.135.221.134, 2001:67c:2178:8::13 Connecting to download.opensuse.org (download.opensuse.org)|195.135.221.134|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1080 (1.1K) Saving to: '/var/cache/apt/network:osmocom:latest_Release.key' 0K . 100% 28.5M=0s 2021-02-11 10:38:31 (28.5 MB/s) - '/var/cache/apt/network:osmocom:latest_Release.key' saved [1080/1080] + apt-key add /var/cache/apt/network:osmocom:latest_Release.key Warning: apt-key output should not be parsed (stdout is not a terminal) OK + apt-get update Get:1 http://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10 ./ InRelease [1607 B] Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 http://security.debian.org/debian-security buster/updates InRelease Get:5 http://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10 ./ Packages [116 kB] Fetched 118 kB in 0s (243 kB/s) Reading package lists... + apt-get -y install osmo-mgw + tee /tmp/out Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: osmo-mgw : Depends: osmocom-latest but it is not going to be installed Depends: libosmonetif8 but it is not going to be installed E: Unable to correct problems, you have held broken packages. + [ -e /tmp/fail ] + find_patterns_or_exit /tmp/out requested an impossible situation ^The following packages have unmet dependencies: Depends: osmocom- but it is not going to be installed + local file=/tmp/out + local pattern + shift + grep -q requested an impossible situation /tmp/out + continue + grep -q ^The following packages have unmet dependencies: /tmp/out + continue + grep -q Depends: osmocom- /tmp/out + continue + grep -q but it is not going to be installed /tmp/out + continue + configure_osmocom_repo_debian_remove network:osmocom:latest + local proj=network:osmocom:latest + rm /etc/apt/sources.list.d/network:osmocom:latest.list + configure_osmocom_repo_debian network:osmocom:nightly + local proj=network:osmocom:nightly + proj_with_slashes network:osmocom:nightly + echo network:osmocom:nightly + sed s.:.:/.g + local obs_repo=download.opensuse.org/repositories/network:/osmocom:/nightly/Debia… + local release_key=/var/cache/apt/network:osmocom:nightly_Release.key + echo Configuring Osmocom repository Configuring Osmocom repository + echo deb http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ + [ -e /var/cache/apt/network:osmocom:nightly_Release.key ] + apt-key add /var/cache/apt/network:osmocom:nightly_Release.key Warning: apt-key output should not be parsed (stdout is not a terminal) OK + apt-get update Get:1 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ InRelease [1592 B] Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 http://security.debian.org/debian-security buster/updates InRelease Get:5 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ Packages [137 kB] Fetched 139 kB in 0s (287 kB/s) Reading package lists... + set +x + set +x + install_repo_packages + install_repo_packages_debian + local obs=obs://build.opensuse.org/network:osmocom:nightly/Debian_10 + echo Installing all repository packages ### Test successful: test_conflict ### ### Running test: install_repo_packages ### Installing all repository packages + aptitude search -F%p ?origin(obs://build.opensuse.org/network:osmocom:nightly/Debian_10) ?architecture(native) + sort + filter_packages_txt + grep -v ^# /repo-install-test/blacklist_debian10.txt + sort -u + comm -23 osmocom_packages_all.txt blacklist.txt + cat osmocom_packages.txt + apt install -y abisip-find libasn1c-dbg libasn1c-dev libasn1c1 libgtp-dbg libgtp-dev libgtp6 libgtpnl-dbg libgtpnl-dev libgtpnl0 libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym liblimesuite-dev liblimesuite20.01-1 liblimesuite20.01-1-dbgsym liborcania-dev liborcania1.2 liborcania1.2-dbgsym libosmo-abis libosmo-abis-dbg libosmo-abis-dev libosmo-e1d-dev libosmo-e1d0 libosmo-e1d0-dbgsym libosmo-fl2k-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-gsup-client-dev libosmo-gsup-client0 libosmo-mgcp-client-dev libosmo-mgcp-client6 libosmo-mgcp-client6-dbgsym libosmo-mslookup-dev libosmo-mslookup0 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-ranap-dbg libosmo-ranap-dev libosmo-ranap3 libosmo-rspro-dev libosmo-rspro1 libosmo-rspro1-dbgsym libosmo-sabp-dbg libosmo-sabp-dev libosmo-sabp0 libosmo-sccp-dev libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmo-sigtran5 libosmo-simtrace2-0 libosmo-simtrace2-0-dbgsym libosmo-simtrace2-dev libosmoabis9 libosmocodec-doc libosmocodec0 libosmocoding-doc libosmocoding0 libosmocore libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmocore16 libosmoctrl-doc libosmoctrl0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmodsp0 libosmogb-doc libosmogb11 libosmogsm-doc libosmogsm15 libosmonetif8 libosmosim2 libosmotrau2 libosmousb0 libosmovty-doc libosmovty4 librtlsdr-dev librtlsdr0 libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libulfius-dev libulfius2.5 libulfius2.5-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym libusrp1 libusrp1-dbgsym libyder-dev libyder2.0 libyder2.0-dbgsym limesuite limesuite-dbgsym limesuite-images limesuite-images20.01 limesuite-udev neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmocom-nightly python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libosmocodec0 is already the newest version (1.4.0.487.c318). libosmocodec0 set to manually installed. libosmocoding0 is already the newest version (1.4.0.487.c318). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.4.0.487.c318). libosmocore16 is already the newest version (1.4.0.487.c318). libosmocore16 set to manually installed. libosmoctrl0 is already the newest version (1.4.0.487.c318). libosmoctrl0 set to manually installed. libosmogb11 is already the newest version (1.4.0.487.c318). libosmogb11 set to manually installed. libosmogsm15 is already the newest version (1.4.0.487.c318). libosmogsm15 set to manually installed. libosmosim2 is already the newest version (1.4.0.487.c318). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.4.0.487.c318). libosmousb0 set to manually installed. libosmovty4 is already the newest version (1.4.0.487.c318). libosmovty4 set to manually installed. osmocom-nightly is already the newest version (1.0.0.202102110126). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmo-netif-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmo-ranap-dbg : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed libosmo-ranap-dev : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed libosmo-ranap3 : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed libosmo-sabp-dbg : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed libosmo-sabp-dev : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed libosmo-sabp0 : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed libosmo-sigtran-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmocodec-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmocoding-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmocore-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmoctrl-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmodsp-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmogb-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmogsm-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libosmovty-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed libusrp-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-bsc-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-bts-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-cbc-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-gbproxy-dbg : Depends: osmo-gbproxy (= 0.0.1.12.1c57) but 1.3.0-2 is to be installed osmo-gbproxy-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-ggsn-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-gsm-manuals-dev : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-gtphub : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-gtphub-dbg : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-hlr-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-hnbgw : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-hnbgw-dbg : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-hnbgw-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-mgw-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-msc : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-msc-dbg : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-msc-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-pcu-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-remsim-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-sgsn : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-sgsn-dbg : Depends: osmocom-nightly (= 1.0.0.202102100126) but 1.0.0.202102110126 is to be installed osmo-sgsn-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-sip-connector-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-smlc-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-stp-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-trx : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed osmo-trx-doc : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed python3-osmopy-libs : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed python3-osmopy-utils : Depends: osmocom-nightly (= 1.0.0.202102110923) but 1.0.0.202102110126 is to be installed E: Unable to correct problems, you have held broken packages. + ret=1 + [ -n ] + docker container kill debian10-repo-install-test-nightly debian10-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

4 years, 4 months

1
8
0 0

Build failed in Jenkins: master-osmo-sgsn » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #24119

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--enable-iu,WIT…> Changes: ------------------------------------------ [...truncated 703.17 KB...] > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 3954 5.0 0.0 54172 21300 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 3977 0.0 0.0 0 0 ? R 09:11 0:00 [osmo-sgsn] build 3985 0.0 0.0 4280 744 ? S 09:11 0:00 /bin/sh -c ps xua | grep osmo build 3987 0.0 0.0 12784 956 ? R 09:11 0:00 grep osmo Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Socket: closing 127.0.0.1:4245 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 51414)> (0 sockets open) Verifying src/gtphub/osmo-gtphub -c /build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg, test verify_doc Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg' > ls -l /proc/3954/fd total 0 lr-x------ 1 build build 64 Feb 12 09:11 0 -> pipe:[1669860855] l-wx------ 1 build build 64 Feb 12 09:11 1 -> pipe:[1669860856] l-wx------ 1 build build 64 Feb 12 09:11 2 -> pipe:[1669860857] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn Failed to verify src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfgz8dqpbc1 Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoSGSN (1.6.0.154-901e) configuration saved from vty !! ! log stderr logging filter all 1 logging color 1 logging print category-hex 1 logging print category 0 logging timestamp 0 logging print file 1 logging level mm notice logging level pag notice logging level meas notice logging level ref notice logging level gprs notice logging level ns notice logging level llc notice logging level sndcp notice logging level slhc notice logging level ranap notice logging level sua notice logging level v42bis notice logging level gtp notice logging level rim notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice ! stats interval 5 ! line vty no login ! ns timer tns-block 3 timer tns-block-retries 3 timer tns-reset 3 timer tns-reset-retries 3 timer tns-test 30 timer tns-alive 3 timer tns-alive-retries 10 timer tsns-prov 3 timer tsns-size-retries 3 timer tsns-config-retries 3 bind udp local listen 127.0.0.1 23000 accept-ipaccess ip-sns signalling-weight 1 data-weight 1 bssgp cs7 instance 0 point-code 0.23.4 sgsn gtp state-dir ./ gtp local-ip 127.0.0.1 ggsn 0 remote-ip 127.0.0.2 ggsn 0 gtp-version 1 ggsn 0 echo-interval 60 gsup remote-ip 127.0.0.1 gsup remote-port 4222 auth-policy remote gsup oap-id 0 ! apn * ggsn 0 no cdr filename no cdr trap cdr interval 600 no compression rfc1144 no compression v42bis cs7-instance-iu 0 State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 3954 2.6 0.0 54172 21364 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 3988 0.0 0.0 21474968360 14704 ? S 09:12 0:00 src/gtphub/osmo-gtphub -c /build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg build 3995 0.0 0.0 4280 756 ? S 09:12 0:00 /bin/sh -c ps xua | grep osmo build 3997 0.0 0.0 12784 944 ? S 09:12 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 46982), raddr=('127.0.0.1', 4253)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 46982), raddr=('127.0.0.1', 4253)> (0 sockets open) Verifying src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgzpgptqxy, test write_config Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/writtenconfig/osmo-gtphub-1iface.cfgzpgptqxy' > ls -l /proc/3954/fd total 0 lr-x------ 1 build build 64 Feb 12 09:11 0 -> pipe:[1669860855] l-wx------ 1 build build 64 Feb 12 09:11 1 -> pipe:[1669860856] l-wx------ 1 build build 64 Feb 12 09:11 2 -> pipe:[1669860857] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 3954 2.1 0.0 54172 21364 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 3999 0.0 0.0 21474968360 14360 ? S 09:12 0:00 src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgzpgptqxy build 4006 0.0 0.0 4280 744 ? S 09:12 0:00 /bin/sh -c ps xua | grep osmo build 4008 0.0 0.0 12784 1028 ? S 09:12 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 46988), raddr=('127.0.0.1', 4253)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 46988), raddr=('127.0.0.1', 4253)> (0 sockets open) Verifying src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgzpgptqxy, test token_vty_command Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/writtenconfig/osmo-gtphub-1iface.cfgzpgptqxy' > ls -l /proc/3954/fd total 0 lr-x------ 1 build build 64 Feb 12 09:11 0 -> pipe:[1669860855] l-wx------ 1 build build 64 Feb 12 09:11 1 -> pipe:[1669860856] l-wx------ 1 build build 64 Feb 12 09:11 2 -> pipe:[1669860857] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4253 *:* > ps xua | grep osmo build 3954 1.8 0.0 54172 21364 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 4010 0.0 0.0 21474968360 14612 ? S 09:12 0:00 src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgzpgptqxy build 4017 0.0 0.0 4280 716 ? S 09:12 0:00 /bin/sh -c ps xua | grep osmo build 4019 0.0 0.0 12784 984 ? S 09:12 0:00 grep osmo ERRORS: 1 Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 46994), raddr=('127.0.0.1', 4253)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 46994), raddr=('127.0.0.1', 4253)> (0 sockets open) make[7]: *** [vty-python-test] Error 1 Makefile:710: recipe for target 'vty-python-test' failed make[7]: Leaving directory '/build/tests' make[6]: *** [vty-test] Error 2 Makefile:727: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' Makefile:704: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 2 make[4]: *** [check-local] Error 2 Makefile:735: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:564: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' Makefile:416: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:461: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '/build' Makefile:752: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

4 years, 4 months

1
9
0 0

Build failed in Jenkins: master-osmo-sgsn » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #24119

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--disable-iu,WI…> Changes: ------------------------------------------ [...truncated 302.26 KB...] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 9198 1.8 0.0 54028 21232 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 9221 0.0 0.0 21474976964 18260 ? R 09:11 0:00 src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfg06gfnq8l build 9228 0.0 0.0 4280 732 ? S 09:11 0:00 /bin/sh -c ps xua | grep osmo build 9230 0.0 0.0 12784 976 ? S 09:11 0:00 grep osmo Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Socket: closing 127.0.0.1:4245 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 50272)> (0 sockets open) Verifying src/gtphub/osmo-gtphub -c /build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg, test verify_doc Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg' > ls -l /proc/9198/fd total 0 lr-x------ 1 build build 64 Feb 12 09:11 0 -> pipe:[765860088] l-wx------ 1 build build 64 Feb 12 09:11 1 -> pipe:[765860089] l-wx------ 1 build build 64 Feb 12 09:11 2 -> pipe:[765860090] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn Failed to verify src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfg06gfnq8l Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoSGSN (1.6.0.154-901e) configuration saved from vty !! ! log stderr logging filter all 1 logging color 1 logging print category-hex 1 logging print category 0 logging timestamp 0 logging print file 1 logging level mm notice logging level pag notice logging level meas notice logging level ref notice logging level gprs notice logging level ns notice logging level llc notice logging level sndcp notice logging level slhc notice logging level ranap notice logging level sua notice logging level v42bis notice logging level gtp notice logging level rim notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice ! stats interval 5 ! line vty no login ! ns timer tns-block 3 timer tns-block-retries 3 timer tns-reset 3 timer tns-reset-retries 3 timer tns-test 30 timer tns-alive 3 timer tns-alive-retries 10 timer tsns-prov 3 timer tsns-size-retries 3 timer tsns-config-retries 3 bind udp local listen 127.0.0.1 23000 accept-ipaccess ip-sns signalling-weight 1 data-weight 1 bssgp sgsn gtp state-dir ./ gtp local-ip 127.0.0.1 ggsn 0 remote-ip 127.0.0.2 ggsn 0 gtp-version 1 ggsn 0 echo-interval 60 gsup remote-ip 127.0.0.1 gsup remote-port 4222 auth-policy remote gsup oap-id 0 ! apn * ggsn 0 no cdr filename no cdr trap cdr interval 600 no compression rfc1144 no compression v42bis State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4253 *:* > ps xua | grep osmo build 9198 1.4 0.0 54028 21232 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 9232 0.0 0.0 21474963864 14380 ? S 09:11 0:00 src/gtphub/osmo-gtphub -c /build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg build 9239 0.0 0.0 4280 736 ? S 09:11 0:00 /bin/sh -c ps xua | grep osmo build 9241 0.0 0.0 12784 956 ? S 09:11 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41182), raddr=('127.0.0.1', 4253)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41182), raddr=('127.0.0.1', 4253)> (0 sockets open) Verifying src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgceyz6s55, test write_config Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/writtenconfig/osmo-gtphub-1iface.cfgceyz6s55' > ls -l /proc/9198/fd total 0 lr-x------ 1 build build 64 Feb 12 09:11 0 -> pipe:[765860088] l-wx------ 1 build build 64 Feb 12 09:11 1 -> pipe:[765860089] l-wx------ 1 build build 64 Feb 12 09:11 2 -> pipe:[765860090] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 9198 1.3 0.0 54028 21232 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 9243 0.0 0.0 21474963864 14368 ? S 09:11 0:00 src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgceyz6s55 build 9250 0.0 0.0 4280 736 ? S 09:11 0:00 /bin/sh -c ps xua | grep osmo build 9252 0.0 0.0 12784 968 ? S 09:11 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41184), raddr=('127.0.0.1', 4253)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41184), raddr=('127.0.0.1', 4253)> (0 sockets open) Verifying src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgceyz6s55, test token_vty_command Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/writtenconfig/osmo-gtphub-1iface.cfgceyz6s55' > ls -l /proc/9198/fd total 0 lr-x------ 1 build build 64 Feb 12 09:11 0 -> pipe:[765860088] l-wx------ 1 build build 64 Feb 12 09:11 1 -> pipe:[765860089] l-wx------ 1 build build 64 Feb 12 09:11 2 -> pipe:[765860090] l-wx------ 1 build build 64 Feb 12 09:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4253 *:* > ps xua | grep osmo build 9198 1.0 0.0 54028 21232 ? S 09:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 9254 0.0 0.0 21474963864 14224 ? S 09:11 0:00 src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfgceyz6s55 build 9261 0.0 0.0 4280 708 ? S 09:11 0:00 /bin/sh -c ps xua | grep osmo build 9263 0.0 0.0 12784 972 ? S 09:11 0:00 grep osmo ERRORS: 1 Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41186), raddr=('127.0.0.1', 4253)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41186), raddr=('127.0.0.1', 4253)> (0 sockets open) Makefile:710: recipe for target 'vty-python-test' failed make[7]: Leaving directory '/build/tests' make[7]: *** [vty-python-test] Error 1 Makefile:727: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' make[6]: *** [vty-test] Error 2 make[5]: *** [python-tests] Error 2 Makefile:704: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' Makefile:735: recipe for target 'check-local' failed make[4]: *** [check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:564: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:416: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[1]: *** [check-recursive] Error 1 Makefile:461: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' Makefile:752: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

4 years, 4 months

1
9
0 0

Build failed in Jenkins: master-osmo-gbproxy » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #25

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-gbproxy/a1=default,a2=d…> Changes: ------------------------------------------ [...truncated 134.69 KB...] ok test_unknown_command (__main__.TestVTY) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56308), raddr=('127.0.0.1', 4246)> (1 sockets open) Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56308), raddr=('127.0.0.1', 4246)> (0 sockets open) Terminating took 0.897s Launch: ./src/osmo-gbproxy -c /build/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build Launching: PWD=/build './src/osmo-gbproxy' '-c' '/build/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg' > ls -l /proc/14909/fd total 0 lr-x------ 1 build build 64 Feb 12 09:06 0 -> pipe:[765691133] l-wx------ 1 build build 64 Feb 12 09:06 1 -> pipe:[765691134] l-wx------ 1 build build 64 Feb 12 09:06 2 -> pipe:[765691135] l-wx------ 1 build build 64 Feb 12 09:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 14909 5.3 0.0 53720 20964 ? S 09:06 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 14932 0.0 0.0 21474964116 15524 ? S 09:06 0:00 ./src/osmo-gbproxy -c /build/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg build 14939 0.0 0.0 4280 700 ? S 09:06 0:00 /bin/sh -c ps xua | grep osmo build 14941 0.0 0.0 12784 984 ? S 09:06 0:00 grep osmo ok ---------------------------------------------------------------------- Ran 3 tests in 4.313s OK Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56312), raddr=('127.0.0.1', 4246)> (1 sockets open) Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56312), raddr=('127.0.0.1', 4246)> (0 sockets open) Terminating took 0.897s osmotestconfig.py -p /build -w /build -v Verifying src/osmo-gbproxy -c /build/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg, test verify_doc Opening /dev/null Launching: PWD=/build 'src/osmo-gbproxy' '-c' '/build/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg' > ls -l /proc/14943/fd total 0 lr-x------ 1 build build 64 Feb 12 09:06 0 -> pipe:[765691133] l-wx------ 1 build build 64 Feb 12 09:06 1 -> pipe:[765691134] l-wx------ 1 build build 64 Feb 12 09:06 2 -> pipe:[765691135] l-wx------ 1 build build 64 Feb 12 09:06 3 -> /dev/null Warning: doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg is not being tested Warning: doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg is not being tested > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 14943 0.0 0.0 53804 20612 ? S 09:06 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 14944 0.0 0.0 21474964116 15520 ? S 09:06 0:00 src/osmo-gbproxy -c /build/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg build 14951 0.0 0.0 4280 768 ? S 09:06 0:00 /bin/sh -c ps xua | grep osmo build 14953 0.0 0.0 12784 972 ? S 09:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56318), raddr=('127.0.0.1', 4246)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56318), raddr=('127.0.0.1', 4246)> (0 sockets open) Verifying src/osmo-gbproxy -c /build/writtenconfig/osmo-gbproxy.cfgvot_m26h, test write_config Launching: PWD=/build 'src/osmo-gbproxy' '-c' '/build/writtenconfig/osmo-gbproxy.cfgvot_m26h' > ls -l /proc/14943/fd total 0 lr-x------ 1 build build 64 Feb 12 09:06 0 -> pipe:[765691133] l-wx------ 1 build build 64 Feb 12 09:06 1 -> pipe:[765691134] l-wx------ 1 build build 64 Feb 12 09:06 2 -> pipe:[765691135] l-wx------ 1 build build 64 Feb 12 09:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 14943 15.0 0.0 53948 20928 ? S 09:06 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 14955 0.0 0.0 21474964116 15408 ? S 09:06 0:00 src/osmo-gbproxy -c /build/writtenconfig/osmo-gbproxy.cfgvot_m26h build 14962 0.0 0.0 4280 736 ? S 09:06 0:00 /bin/sh -c ps xua | grep osmo build 14964 0.0 0.0 12784 932 ? S 09:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56322), raddr=('127.0.0.1', 4246)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 56322), raddr=('127.0.0.1', 4246)> (0 sockets open) Verifying src/osmo-gbproxy -c /build/writtenconfig/osmo-gbproxy.cfgvot_m26h, test token_vty_command Launching: PWD=/build 'src/osmo-gbproxy' '-c' '/build/writtenconfig/osmo-gbproxy.cfgvot_m26h' > ls -l /proc/14943/fd total 0 lr-x------ 1 build build 64 Feb 12 09:06 0 -> pipe:[765691133] l-wx------ 1 build build 64 Feb 12 09:06 1 -> pipe:[765691134] l-wx------ 1 build build 64 Feb 12 09:06 2 -> pipe:[765691135] l-wx------ 1 build build 64 Feb 12 09:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 14943 2.0 0.0 53948 20928 ? S 09:06 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 14966 0.0 0.0 0 0 ? Z 09:06 0:00 [osmo-gbproxy] <defunct> build 14974 0.0 0.0 4280 704 ? S 09:06 0:00 /bin/sh -c ps xua | grep osmo build 14976 0.0 0.0 12784 932 ? S 09:06 0:00 grep osmo Failed to verify src/osmo-gbproxy -c /build/writtenconfig/osmo-gbproxy.cfgvot_m26h Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoGbProxy (0.0.1.13-4499) configuration saved from vty !! ! log stderr logging filter all 1 logging color 1 logging print category-hex 1 logging print category 0 logging timestamp 0 logging print file 1 logging level gprs debug logging level ns info logging level obj notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice ! stats interval 5 ! line vty no login ! ns timer tns-block 3 timer tns-block-retries 3 timer tns-reset 3 timer tns-reset-retries 3 timer tns-test 30 timer tns-alive 3 timer tns-alive-retries 10 timer tsns-prov 3 timer tsns-size-retries 3 timer tsns-config-retries 3 bind udp local listen 127.0.0.100 23000 accept-ipaccess ip-sns signalling-weight 1 data-weight 1 nse 101 nsvc ipa local 192.168.100.239 7777 nsvci 101 gbproxy nri bitlen 0 sgsn nsei 101 name main allow-attach ERRORS: 1 Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Socket: closing 127.0.0.1:4246 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 56386)> (0 sockets open) make[7]: *** [vty-python-test] Error 1 Makefile:685: recipe for target 'vty-python-test' failed make[7]: Leaving directory '/build/tests' make[6]: *** [vty-test] Error 2 Makefile:706: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' Makefile:679: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 2 Makefile:714: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[4]: *** [check-local] Error 2 Makefile:539: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 make[2]: *** [check-recursive] Error 1 Makefile:391: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[1]: *** [check-recursive] Error 1 Makefile:444: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make: *** [check] Error 2 Makefile:735: recipe for target 'check' failed + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

4 years, 4 months

1
2
0 0

Build failed in Jenkins: Osmocom-repo-install-centos8 » next,repo-install-test #83

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-centos8/feed=n…> Changes: ------------------------------------------ [...truncated 10.83 KB...] Checking feed: next + echo 'Checking project: network:osmocom:next' + '[' -n network:osmocom:nightly ']' + echo 'Checking conflicting project: network:osmocom:nightly' Checking project: network:osmocom:next Checking conflicting project: network:osmocom:nightly + '[' -n centos8 ']' + echo 'Linux distribution: centos8' Linux distribution: centos8 + '[' -n ' test_conflict install_repo_packages test_binaries services_check ' ']' + echo 'Enabled tests: test_conflict install_repo_packages test_binaries services_check ' Enabled tests: test_conflict install_repo_packages test_binaries services_check + configure_keep_cache + '[' -z '' ']' + return + configure_osmocom_repo network:osmocom:next + case "$DISTRO" in + configure_osmocom_repo_centos network:osmocom:next + local proj=network:osmocom:next ++ proj_with_slashes network:osmocom:next ++ echo network:osmocom:next ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/next/C… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:next ++ echo network:osmocom:next ++ tr : _ + for test in $TESTS + set +x + case "$test" in + test_conflict + case "$DISTRO" in + test_conflict_centos ### Running test: test_conflict ### + dnf -y install libosmocore-devel CentOS Linux 8 - PowerTools 1.2 MB/s | 2.0 MB 00:01 network:osmocom:next 700 kB/s | 220 kB 00:00 Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libosmocore-devel x86_64 1.4.0.487.c318-1.1 network_osmocom_next 70 k Installing dependencies: libosmocore16 x86_64 1.4.0.487.c318-1.1 network_osmocom_next 97 k libpkgconf x86_64 1.4.2-1.el8 baseos 35 k libtalloc x86_64 2.3.1-2.el8 baseos 49 k libtalloc-devel x86_64 2.3.1-2.el8 baseos 63 k lksctp-tools x86_64 1.0.18-3.el8 baseos 100 k osmocom-next x86_64 1.0.0.202102110140-1.1 network_osmocom_next 6.9 k pkgconf x86_64 1.4.2-1.el8 baseos 38 k pkgconf-m4 noarch 1.4.2-1.el8 baseos 17 k pkgconf-pkg-config x86_64 1.4.2-1.el8 baseos 15 k Transaction Summary ================================================================================ Install 10 Packages Total download size: 491 k Installed size: 1.0 M Downloading Packages: (1/10): libpkgconf-1.4.2-1.el8.x86_64.rpm 895 kB/s | 35 kB 00:00 (2/10): libtalloc-2.3.1-2.el8.x86_64.rpm 961 kB/s | 49 kB 00:00 (3/10): libtalloc-devel-2.3.1-2.el8.x86_64.rpm 1.1 MB/s | 63 kB 00:00 (4/10): lksctp-tools-1.0.18-3.el8.x86_64.rpm 3.7 MB/s | 100 kB 00:00 (5/10): pkgconf-1.4.2-1.el8.x86_64.rpm 2.6 MB/s | 38 kB 00:00 (6/10): pkgconf-m4-1.4.2-1.el8.noarch.rpm 1.3 MB/s | 17 kB 00:00 (7/10): pkgconf-pkg-config-1.4.2-1.el8.x86_64.r 826 kB/s | 15 kB 00:00 (8/10): osmocom-next-1.0.0.202102110140-1.1.x86 27 kB/s | 6.9 kB 00:00 (9/10): libosmocore-devel-1.4.0.487.c318-1.1.x8 235 kB/s | 70 kB 00:00 (10/10): libosmocore16-1.4.0.487.c318-1.1.x86_6 285 kB/s | 97 kB 00:00 -------------------------------------------------------------------------------- Total 1.0 MB/s | 491 kB 00:00 warning: /var/cache/dnf/network_osmocom_next-12117ca76ed4f12d/packages/libosmocore-devel-1.4.0.487.c318-1.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 17280ddf: NOKEY network:osmocom:next 25 kB/s | 1.1 kB 00:00 Importing GPG key 0x17280DDF: Userid : "network OBS Project <network(a)build.opensuse.org>" Fingerprint: 0080 689B E757 A876 CB7D C269 62EB 1A09 1728 0DDF From : https://download.opensuse.org/repositories/network:/osmocom:/next/CentOS_8/… Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : osmocom-next-1.0.0.202102110140-1.1.x86_64 1/10 Installing : libtalloc-2.3.1-2.el8.x86_64 2/10 Installing : pkgconf-m4-1.4.2-1.el8.noarch 3/10 Installing : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Running scriptlet: lksctp-tools-1.0.18-3.el8.x86_64 4/10 Installing : libosmocore16-1.4.0.487.c318-1.1.x86_64 5/10 Running scriptlet: libosmocore16-1.4.0.487.c318-1.1.x86_64 5/10 Installing : libpkgconf-1.4.2-1.el8.x86_64 6/10 Installing : pkgconf-1.4.2-1.el8.x86_64 7/10 Installing : pkgconf-pkg-config-1.4.2-1.el8.x86_64 8/10 Installing : libtalloc-devel-2.3.1-2.el8.x86_64 9/10 Installing : libosmocore-devel-1.4.0.487.c318-1.1.x86_64 10/10 Running scriptlet: libosmocore-devel-1.4.0.487.c318-1.1.x86_64 10/10 Verifying : libpkgconf-1.4.2-1.el8.x86_64 1/10 Verifying : libtalloc-2.3.1-2.el8.x86_64 2/10 Verifying : libtalloc-devel-2.3.1-2.el8.x86_64 3/10 Verifying : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Verifying : pkgconf-1.4.2-1.el8.x86_64 5/10 Verifying : pkgconf-m4-1.4.2-1.el8.noarch 6/10 Verifying : pkgconf-pkg-config-1.4.2-1.el8.x86_64 7/10 Verifying : libosmocore-devel-1.4.0.487.c318-1.1.x86_64 8/10 Verifying : libosmocore16-1.4.0.487.c318-1.1.x86_64 9/10 Verifying : osmocom-next-1.0.0.202102110140-1.1.x86_64 10/10 Installed: libosmocore-devel-1.4.0.487.c318-1.1.x86_64 libosmocore16-1.4.0.487.c318-1.1.x86_64 libpkgconf-1.4.2-1.el8.x86_64 libtalloc-2.3.1-2.el8.x86_64 libtalloc-devel-2.3.1-2.el8.x86_64 lksctp-tools-1.0.18-3.el8.x86_64 osmocom-next-1.0.0.202102110140-1.1.x86_64 pkgconf-1.4.2-1.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch pkgconf-pkg-config-1.4.2-1.el8.x86_64 Complete! + configure_osmocom_repo_centos_remove network:osmocom:next + local proj=network:osmocom:next + rm /etc/yum.repos.d/network:osmocom:next.repo + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ echo network:osmocom:nightly ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightl… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + dnf -y install osmo-mgw + tee /tmp/out network:osmocom:nightly 677 kB/s | 219 kB 00:00 Error: Problem: package osmo-mgw-1.7.0.137.a340-7.1.x86_64 requires osmocom-nightly = 1.0.0.202102110126, but none of the providers can be installed - package osmocom-next-1.0.0.202102110140-1.1.x86_64 conflicts with osmocom-nightly provided by osmocom-nightly-1.0.0.202102110126-1.1.x86_64 - package osmocom-nightly-1.0.0.202102110126-1.1.x86_64 conflicts with osmocom-next provided by osmocom-next-1.0.0.202102110140-1.1.x86_64 - cannot install the best candidate for the job - problem with installed package osmocom-next-1.0.0.202102110140-1.1.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + '[' -e /tmp/fail ']' + find_patterns_or_exit /tmp/out '^Error:' 'but none of the providers can be installed' 'conflicts with osmocom-' + local file=/tmp/out + local pattern + shift + for pattern in "$@" + grep -q '^Error:' /tmp/out + continue + for pattern in "$@" + grep -q 'but none of the providers can be installed' /tmp/out + continue + for pattern in "$@" + grep -q 'conflicts with osmocom-' /tmp/out + continue + configure_osmocom_repo_centos_remove network:osmocom:nightly + local proj=network:osmocom:nightly + rm /etc/yum.repos.d/network:osmocom:nightly.repo + configure_osmocom_repo_centos network:osmocom:next + local proj=network:osmocom:next ++ proj_with_slashes network:osmocom:next ++ echo network:osmocom:next ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/next/C… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:next ++ echo network:osmocom:next ++ tr : _ + set +x + for test in $TESTS + set +x ### Test successful: test_conflict ### ### Running test: install_repo_packages ### + case "$test" in + install_repo_packages + case "$DISTRO" in + install_repo_packages_centos + echo 'Installing all repository packages' Installing all repository packages ++ proj_with_underscore network:osmocom:next ++ echo network:osmocom:next ++ tr : _ + LANG=C.UTF-8 + repoquery --quiet --repoid=network_osmocom_next --archlist=x86_64,noarch '--qf=%{name}' + filter_packages_txt + grep -v '^#' /repo-install-test/blacklist_centos8.txt + sort -u + comm -23 osmocom_packages_all.txt blacklist.txt ++ cat osmocom_packages.txt + dnf install -y fdupes fdupes-debuginfo fdupes-debugsource libasn1c-debugsource libasn1c-devel libasn1c1 libasn1c1-debuginfo libcsv-debugsource libcsv-devel libcsv3 libcsv3-debuginfo libdbi libdbi-dbd-mysql libdbi-dbd-mysql-debuginfo libdbi-dbd-pgsql libdbi-dbd-pgsql-debuginfo libdbi-dbd-sqlite libdbi-dbd-sqlite-debuginfo libdbi-debuginfo libdbi-debugsource libdbi-devel libdbi-doc libdbi-drivers libdbi-drivers-debuginfo libdbi-drivers-debugsource libgtp-devel libgtp6 libgtp6-debuginfo libgtpnl-debugsource libgtpnl-devel libgtpnl0 libgtpnl0-debuginfo libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-debuginfo liborcania2_1 liborcania2_1-debuginfo libortp9 libortp9-debuginfo libosmo-abis-debuginfo libosmo-abis-debugsource libosmo-gsup-client-devel libosmo-gsup-client-devel-debuginfo libosmo-gsup-client0 libosmo-gsup-client0-debuginfo libosmo-mgcp-client-devel libosmo-mgcp-client6 libosmo-mgcp-client6-debuginfo libosmo-mgcp-devel libosmo-mslookup-devel libosmo-mslookup0 libosmo-mslookup0-debuginfo libosmo-mtp-devel libosmo-netif-debugsource libosmo-ranap-devel libosmo-ranap3 libosmo-ranap3-debuginfo libosmo-rspro-devel libosmo-rspro1 libosmo-rspro1-debuginfo libosmo-sabp-devel libosmo-sabp0 libosmo-sabp0-debuginfo libosmo-sccp-debuginfo libosmo-sccp-debugsource libosmo-sccp-devel libosmo-sigtran-devel libosmo-sigtran5 libosmo-sigtran5-debuginfo libosmo-simtrace2-0 libosmo-simtrace2-0-debuginfo libosmo-simtrace2-devel libosmo-xua-devel libosmoabis-devel libosmoabis9 libosmoabis9-debuginfo libosmocodec-devel libosmocodec0 libosmocodec0-debuginfo libosmocoding-devel libosmocoding0 libosmocoding0-debuginfo libosmocore-debuginfo libosmocore-debugsource libosmocore-devel libosmocore-tools libosmocore-tools-debuginfo libosmocore16 libosmocore16-debuginfo libosmoctrl-devel libosmoctrl0 libosmoctrl0-debuginfo libosmogb-devel libosmogb11 libosmogb11-debuginfo libosmogsm-devel libosmogsm15 libosmogsm15-debuginfo libosmonetif-devel libosmonetif8 libosmonetif8-debuginfo libosmosim-devel libosmosim2 libosmosim2-debuginfo libosmotrau-devel libosmotrau2 libosmotrau2-debuginfo libosmousb-devel libosmousb0 libosmousb0-debuginfo libosmovty-devel libosmovty4 libosmovty4-debuginfo libpgm-5_2-0 libpgm-5_2-0-debuginfo libsmpp34-1 libsmpp34-1-debuginfo libsmpp34-1-devel libsmpp34-debugsource libsodium-debugsource libsodium-devel libsodium23 libsodium23-debuginfo libsofia-sip-ua-glib3 libsofia-sip-ua-glib3-debuginfo libsofia-sip-ua0 libsofia-sip-ua0-debuginfo libulfius2_7 libulfius2_7-debuginfo libunwind libunwind-debuginfo libunwind-debugsource libunwind-devel libyder1_4 libyder1_4-debuginfo libzmq5 libzmq5-debuginfo openpgm-debugsource openpgm-devel orcania-debugsource orcania-devel ortp-debugsource ortp-devel osmo-bsc osmo-bsc-abisip-find osmo-bsc-abisip-find-debuginfo osmo-bsc-bs11-utils osmo-bsc-bs11-utils-debuginfo osmo-bsc-debuginfo osmo-bsc-debugsource osmo-bsc-ipaccess-utils osmo-bsc-ipaccess-utils-debuginfo osmo-bsc-meas-utils osmo-bsc-meas-utils-debuginfo osmo-bts osmo-bts-debuginfo osmo-bts-debugsource osmo-bts-omldummy osmo-bts-omldummy-debuginfo osmo-bts-virtual osmo-bts-virtual-debuginfo osmo-cbc osmo-cbc-debuginfo osmo-cbc-debugsource osmo-cbc-utils osmo-gbproxy osmo-gbproxy-debuginfo osmo-gbproxy-debugsource osmo-ggsn osmo-ggsn-debuginfo osmo-ggsn-debugsource osmo-gtphub osmo-gtphub-debuginfo osmo-hlr osmo-hlr-debuginfo osmo-hlr-debugsource osmo-iuh osmo-iuh-debuginfo osmo-iuh-debugsource osmo-mgw osmo-mgw-debuginfo osmo-mgw-debugsource osmo-msc osmo-msc-debuginfo osmo-msc-debugsource osmo-mslookup-client osmo-mslookup-client-debuginfo osmo-pcap osmo-pcap-debuginfo osmo-pcap-debugsource osmo-pcu osmo-pcu-debuginfo osmo-pcu-debugsource osmo-remsim-bankd osmo-remsim-bankd-debuginfo osmo-remsim-client-shell osmo-remsim-client-shell-debuginfo osmo-remsim-client-st2 osmo-remsim-client-st2-debuginfo osmo-remsim-debuginfo osmo-remsim-debugsource osmo-remsim-server osmo-remsim-server-debuginfo osmo-sgsn osmo-sgsn-debuginfo osmo-sgsn-debugsource osmo-sip-connector osmo-sip-connector-debuginfo osmo-sip-connector-debugsource osmo-smlc osmo-smlc-debuginfo osmo-smlc-debugsource osmo-stp osmo-stp-debuginfo osmo-trx osmo-trx-debuginfo osmo-trx-debugsource osmo-trx-ipc osmo-trx-ipc-debuginfo osmo-trx-ipc-test osmo-trx-ipc-test-debuginfo osmo-trx-uhd osmo-trx-uhd-debuginfo osmocom-next simtrace2 simtrace2-debuginfo simtrace2-debugsource sofia-sip sofia-sip-debuginfo sofia-sip-debugsource sofia-sip-devel uhd uhd-debuginfo uhd-debugsource uhd-devel uhd-doc uhd-firmware uhd-tools uhd-tools-debuginfo ulfius-debuginfo ulfius-debugsource uwsc uwsc-debuginfo yder-debugsource yder-devel zeromq-debuginfo zeromq-debugsource zeromq-devel zeromq-tools zeromq-tools-debuginfo Package libosmocore-devel-1.4.0.487.c318-1.1.x86_64 is already installed. Package libosmocore16-1.4.0.487.c318-1.1.x86_64 is already installed. Package osmocom-next-1.0.0.202102110140-1.1.x86_64 is already installed. Error: Problem 1: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by libosmo-ranap-devel-0.6.0.41.f05c-7.1.x86_64 Problem 2: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by libosmo-ranap3-0.6.0.41.f05c-7.1.x86_64 Problem 3: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by libosmo-sabp-devel-0.6.0.41.f05c-7.1.x86_64 Problem 4: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by libosmo-sabp0-0.6.0.41.f05c-7.1.x86_64 Problem 5: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by osmo-gtphub-1.6.0.154.901e-2.1.x86_64 Problem 6: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by osmo-iuh-0.6.0.41.f05c-7.1.x86_64 Problem 7: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by osmo-msc-1.6.1.94.dbb3-2.1.x86_64 Problem 8: cannot install the best candidate for the job - nothing provides osmocom-next = 1.0.0.202102100140 needed by osmo-sgsn-1.6.0.154.901e-2.1.x86_64 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + ret=1 + [ -n ] + docker container kill centos8-repo-install-test-next centos8-repo-install-test-next + exit 1 Build step 'Execute shell' marked build as failure

4 years, 4 months

1
2
0 0

Build failed in Jenkins: registry-rebuild-upload-titan #1

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/1/dis…> Changes: ------------------------------------------ Started by user Oliver Smith Running as SYSTEM Building remotely on host2-deb9build-ansible (ttcn3 osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/ws/> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/ws/> # timeout=10 Fetching upstream changes from git://git.osmocom.org/docker-playground > git --version # timeout=10 > git fetch --tags --progress -- git://git.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/docker-playground # timeout=10 Fetching upstream changes from git://git.osmocom.org/docker-playground > git fetch --tags --progress -- git://git.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 1927b88800ff486a360b71d849626927fe4b4cfc (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 1927b88800ff486a360b71d849626927fe4b4cfc # timeout=10 Commit message: "osmo-sip-master: Don't install packages not required" First time build. Skipping changelog. [registry-rebuild-upload-titan] $ /bin/sh -xe /tmp/jenkins8836497988477424083.sh + REGISTRY=registry.osmocom.org + make -C debian-stretch-titan make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/ws/de…'> docker build \ --build-arg USER=osmocom-build \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:stretch \ --build-arg DISTRO=debian-stretch \ --build-arg OSMOCOM_REPO_MIRROR=http://download.opensuse.org \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ -t docker.io/osmocom-build/debian-stretch-titan:latest . Sending build context to Docker daemon 7.68kB Step 1/15 : ARG REGISTRY=docker.io Step 2/15 : ARG UPSTREAM_DISTRO=debian:stretch Step 3/15 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} ---> f00be68857e6 Step 4/15 : ARG OSMOCOM_REPO_MIRROR="http://download.opensuse.org" ---> Using cache ---> 5dfc21f54096 Step 5/15 : MAINTAINER Harald Welte <laforge(a)gnumonks.org> ---> Using cache ---> 2390de086d0a Step 6/15 : ARG OSMOCOM_REPO="$OSMOCOM_REPO_MIRROR/repositories/network:/osmocom:/latest/Debian_9.0/" ---> Using cache ---> 51bdd726a2a0 Step 7/15 : RUN apt-get update && apt-get install -y gnupg ---> Using cache ---> beaaac324f74 Step 8/15 : COPY Release.key /tmp/Release.key ---> Using cache ---> 1f9842ab86fe Step 9/15 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key && echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-latest.list ---> Using cache ---> 71ee4c46c55a Step 10/15 : ADD $OSMOCOM_REPO/Release /tmp/Release ---> Using cache ---> 52023ee99bc7 Step 11/15 : RUN apt-get update && apt-get install -y --no-install-recommends --no-install-suggests eclipse-titan ---> Using cache ---> badd7af14050 Step 12/15 : RUN apt-get update && apt-get upgrade -y && DEBIAN_FRONTEND='noninteractive' apt-get install -y --no-install-recommends --no-install-suggests build-essential git procps tcpdump wireshark-common vim netcat-openbsd && apt-get clean ---> Using cache ---> e85b9d18e4d7 Step 13/15 : RUN sed -i 's/^#error/\/\/#error/' /usr/include/titan/cversion.h ---> Using cache ---> f10ffff2c8fb Step 14/15 : RUN apt-get update && apt-get -y install wget ---> Using cache ---> f09c79bbcb36 Step 15/15 : RUN DPKG_ARCH="$(dpkg --print-architecture)" && export $DPKG_ARCH && wget https://ftp.osmocom.org/binaries/libfftranscode/libfftranscode0_0.3_${DPKG_… && wget https://ftp.osmocom.org/binaries/libfftranscode/libfftranscode-dev_0.3_${DP… && dpkg -i ./libfftranscode0_0.3_${DPKG_ARCH}.deb ./libfftranscode-dev_0.3_${DPKG_ARCH}.deb && apt install --fix-broken && rm libfftranscode*.deb ---> Using cache ---> 9b4c753ce14e [Warning] One or more build-args [DISTRO LIBOSMOCORE_BRANCH OSMO_BSC_BRANCH OSMO_HLR_BRANCH OSMO_PCU_BRANCH OSMO_SIP_BRANCH OSMO_TTCN3_BRANCH OSMO_BB_BRANCH OSMO_GBPROXY_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_MSC_BRANCH OSMO_SGSN_BRANCH OSMO_STP_BRANCH OSMOCOM_REPO_VERSION OSMO_BTS_BRANCH OSMO_IUH_BRANCH OSMO_GGSN_BRANCH OSMO_MGW_BRANCH OSMO_NITB_BRANCH USER] were not consumed Successfully built 9b4c753ce14e Successfully tagged osmocom-build/debian-stretch-titan:latest make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/registry-rebuild-upload-titan/ws/de…'> + docker push registry.osmocom.org/osmocom-build/debian-stretch-titan The push refers to repository [registry.osmocom.org/osmocom-build/debian-stretch-titan] An image does not exist locally with the tag: registry.osmocom.org/osmocom-build/debian-stretch-titan Build step 'Execute shell' marked build as failure

4 years, 4 months

1
1
0 0

Build failed in Jenkins: Osmocom-repo-install-centos8 » nightly,repo-install-test #83

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-centos8/feed=n…> Changes: ------------------------------------------ [...truncated 11.18 KB...] + echo 'Checking conflicting project: network:osmocom:next' Checking project: network:osmocom:nightly Checking conflicting project: network:osmocom:next Linux distribution: centos8 + '[' -n centos8 ']' + echo 'Linux distribution: centos8' + '[' -n ' test_conflict install_repo_packages test_binaries services_check ' ']' + echo 'Enabled tests: test_conflict install_repo_packages test_binaries services_check ' Enabled tests: test_conflict install_repo_packages test_binaries services_check + configure_keep_cache + '[' -z '' ']' + return + configure_osmocom_repo network:osmocom:nightly + case "$DISTRO" in + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ sed s.:.:/.g ++ echo network:osmocom:nightly + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightl… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + for test in $TESTS + set +x + case "$test" in + test_conflict ### Running test: test_conflict ### + case "$DISTRO" in + test_conflict_centos + dnf -y install libosmocore-devel CentOS Linux 8 - AppStream 105 kB/s | 4.3 kB 00:00 CentOS Linux 8 - BaseOS 14 kB/s | 3.9 kB 00:00 CentOS Linux 8 - Extras 30 kB/s | 1.5 kB 00:00 CentOS Linux 8 - PowerTools 6.3 MB/s | 2.0 MB 00:00 network:osmocom:nightly 710 kB/s | 219 kB 00:00 Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libosmocore-devel x86_64 1.4.0.487.c318-1.1 network_osmocom_nightly 70 k Installing dependencies: libosmocore16 x86_64 1.4.0.487.c318-1.1 network_osmocom_nightly 97 k libpkgconf x86_64 1.4.2-1.el8 baseos 35 k libtalloc x86_64 2.3.1-2.el8 baseos 49 k libtalloc-devel x86_64 2.3.1-2.el8 baseos 63 k lksctp-tools x86_64 1.0.18-3.el8 baseos 100 k osmocom-nightly x86_64 1.0.0.202102110126-1.1 network_osmocom_nightly 6.9 k pkgconf x86_64 1.4.2-1.el8 baseos 38 k pkgconf-m4 noarch 1.4.2-1.el8 baseos 17 k pkgconf-pkg-config x86_64 1.4.2-1.el8 baseos 15 k Transaction Summary ================================================================================ Install 10 Packages Total download size: 491 k Installed size: 1.0 M Downloading Packages: (1/10): libpkgconf-1.4.2-1.el8.x86_64.rpm 797 kB/s | 35 kB 00:00 (2/10): libtalloc-2.3.1-2.el8.x86_64.rpm 902 kB/s | 49 kB 00:00 (3/10): libtalloc-devel-2.3.1-2.el8.x86_64.rpm 1.1 MB/s | 63 kB 00:00 (4/10): pkgconf-1.4.2-1.el8.x86_64.rpm 2.8 MB/s | 38 kB 00:00 (5/10): pkgconf-m4-1.4.2-1.el8.noarch.rpm 1.3 MB/s | 17 kB 00:00 (6/10): lksctp-tools-1.0.18-3.el8.x86_64.rpm 3.8 MB/s | 100 kB 00:00 (7/10): pkgconf-pkg-config-1.4.2-1.el8.x86_64.r 987 kB/s | 15 kB 00:00 (8/10): osmocom-nightly-1.0.0.202102110126-1.1. 31 kB/s | 6.9 kB 00:00 (9/10): libosmocore16-1.4.0.487.c318-1.1.x86_64 390 kB/s | 97 kB 00:00 (10/10): libosmocore-devel-1.4.0.487.c318-1.1.x 261 kB/s | 70 kB 00:00 -------------------------------------------------------------------------------- Total 763 kB/s | 491 kB 00:00 warning: /var/cache/dnf/network_osmocom_nightly-8d6c2c122a187e40/packages/libosmocore-devel-1.4.0.487.c318-1.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 17280ddf: NOKEY network:osmocom:nightly 20 kB/s | 1.1 kB 00:00 Importing GPG key 0x17280DDF: Userid : "network OBS Project <network(a)build.opensuse.org>" Fingerprint: 0080 689B E757 A876 CB7D C269 62EB 1A09 1728 0DDF From : https://download.opensuse.org/repositories/network:/osmocom:/nightly/CentOS… Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : osmocom-nightly-1.0.0.202102110126-1.1.x86_64 1/10 Installing : libtalloc-2.3.1-2.el8.x86_64 2/10 Installing : pkgconf-m4-1.4.2-1.el8.noarch 3/10 Installing : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Running scriptlet: lksctp-tools-1.0.18-3.el8.x86_64 4/10 Installing : libosmocore16-1.4.0.487.c318-1.1.x86_64 5/10 Running scriptlet: libosmocore16-1.4.0.487.c318-1.1.x86_64 5/10 Installing : libpkgconf-1.4.2-1.el8.x86_64 6/10 Installing : pkgconf-1.4.2-1.el8.x86_64 7/10 Installing : pkgconf-pkg-config-1.4.2-1.el8.x86_64 8/10 Installing : libtalloc-devel-2.3.1-2.el8.x86_64 9/10 Installing : libosmocore-devel-1.4.0.487.c318-1.1.x86_64 10/10 Running scriptlet: libosmocore-devel-1.4.0.487.c318-1.1.x86_64 10/10 Verifying : libpkgconf-1.4.2-1.el8.x86_64 1/10 Verifying : libtalloc-2.3.1-2.el8.x86_64 2/10 Verifying : libtalloc-devel-2.3.1-2.el8.x86_64 3/10 Verifying : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Verifying : pkgconf-1.4.2-1.el8.x86_64 5/10 Verifying : pkgconf-m4-1.4.2-1.el8.noarch 6/10 Verifying : pkgconf-pkg-config-1.4.2-1.el8.x86_64 7/10 Verifying : libosmocore-devel-1.4.0.487.c318-1.1.x86_64 8/10 Verifying : libosmocore16-1.4.0.487.c318-1.1.x86_64 9/10 Verifying : osmocom-nightly-1.0.0.202102110126-1.1.x86_64 10/10 Installed: libosmocore-devel-1.4.0.487.c318-1.1.x86_64 libosmocore16-1.4.0.487.c318-1.1.x86_64 libpkgconf-1.4.2-1.el8.x86_64 libtalloc-2.3.1-2.el8.x86_64 libtalloc-devel-2.3.1-2.el8.x86_64 lksctp-tools-1.0.18-3.el8.x86_64 osmocom-nightly-1.0.0.202102110126-1.1.x86_64 pkgconf-1.4.2-1.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch pkgconf-pkg-config-1.4.2-1.el8.x86_64 Complete! + configure_osmocom_repo_centos_remove network:osmocom:nightly + local proj=network:osmocom:nightly + rm /etc/yum.repos.d/network:osmocom:nightly.repo + configure_osmocom_repo_centos network:osmocom:next + local proj=network:osmocom:next ++ proj_with_slashes network:osmocom:next ++ echo network:osmocom:next ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/next/C… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:next ++ echo network:osmocom:next ++ tr : _ + dnf -y install osmo-mgw + tee /tmp/out network:osmocom:next 676 kB/s | 220 kB 00:00 Error: Problem: package osmo-mgw-1.7.0.137.a340-7.1.x86_64 requires osmocom-next = 1.0.0.202102110140, but none of the providers can be installed - package osmocom-nightly-1.0.0.202102110126-1.1.x86_64 conflicts with osmocom-next provided by osmocom-next-1.0.0.202102110140-1.1.x86_64 - package osmocom-next-1.0.0.202102110140-1.1.x86_64 conflicts with osmocom-nightly provided by osmocom-nightly-1.0.0.202102110126-1.1.x86_64 - cannot install the best candidate for the job - problem with installed package osmocom-nightly-1.0.0.202102110126-1.1.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + '[' -e /tmp/fail ']' + find_patterns_or_exit /tmp/out '^Error:' 'but none of the providers can be installed' 'conflicts with osmocom-' + local file=/tmp/out + local pattern + shift + for pattern in "$@" + grep -q '^Error:' /tmp/out + continue + for pattern in "$@" + grep -q 'but none of the providers can be installed' /tmp/out + continue + for pattern in "$@" + grep -q 'conflicts with osmocom-' /tmp/out + continue + configure_osmocom_repo_centos_remove network:osmocom:next + local proj=network:osmocom:next + rm /etc/yum.repos.d/network:osmocom:next.repo + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ echo network:osmocom:nightly ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightl… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:nightly ++ tr : _ ++ echo network:osmocom:nightly + set +x ### Test successful: test_conflict ### + for test in $TESTS + set +x ### Running test: install_repo_packages ### + case "$test" in + install_repo_packages + case "$DISTRO" in + install_repo_packages_centos + echo 'Installing all repository packages' Installing all repository packages ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + LANG=C.UTF-8 + repoquery --quiet --repoid=network_osmocom_nightly --archlist=x86_64,noarch '--qf=%{name}' + filter_packages_txt + grep -v '^#' /repo-install-test/blacklist_centos8.txt + sort -u + comm -23 osmocom_packages_all.txt blacklist.txt ++ cat osmocom_packages.txt + dnf install -y fdupes fdupes-debuginfo fdupes-debugsource libasn1c-debugsource libasn1c-devel libasn1c1 libasn1c1-debuginfo libcsv-debugsource libcsv-devel libcsv3 libcsv3-debuginfo libdbi libdbi-dbd-mysql libdbi-dbd-mysql-debuginfo libdbi-dbd-pgsql libdbi-dbd-pgsql-debuginfo libdbi-dbd-sqlite libdbi-dbd-sqlite-debuginfo libdbi-debuginfo libdbi-debugsource libdbi-devel libdbi-doc libdbi-drivers libdbi-drivers-debuginfo libdbi-drivers-debugsource libgtp-devel libgtp6 libgtp6-debuginfo libgtpnl-debugsource libgtpnl-devel libgtpnl0 libgtpnl0-debuginfo libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-debuginfo liborcania2_1 liborcania2_1-debuginfo libortp9 libortp9-debuginfo libosmo-abis-debuginfo libosmo-abis-debugsource libosmo-gsup-client-devel libosmo-gsup-client-devel-debuginfo libosmo-gsup-client0 libosmo-gsup-client0-debuginfo libosmo-mgcp-client-devel libosmo-mgcp-client6 libosmo-mgcp-client6-debuginfo libosmo-mgcp-devel libosmo-mslookup-devel libosmo-mslookup0 libosmo-mslookup0-debuginfo libosmo-mtp-devel libosmo-netif-debugsource libosmo-ranap-devel libosmo-ranap3 libosmo-ranap3-debuginfo libosmo-rspro-devel libosmo-rspro1 libosmo-rspro1-debuginfo libosmo-sabp-devel libosmo-sabp0 libosmo-sabp0-debuginfo libosmo-sccp-debuginfo libosmo-sccp-debugsource libosmo-sccp-devel libosmo-sigtran-devel libosmo-sigtran5 libosmo-sigtran5-debuginfo libosmo-simtrace2-0 libosmo-simtrace2-0-debuginfo libosmo-simtrace2-devel libosmo-xua-devel libosmoabis-devel libosmoabis9 libosmoabis9-debuginfo libosmocodec-devel libosmocodec0 libosmocodec0-debuginfo libosmocoding-devel libosmocoding0 libosmocoding0-debuginfo libosmocore-debuginfo libosmocore-debugsource libosmocore-devel libosmocore-tools libosmocore-tools-debuginfo libosmocore16 libosmocore16-debuginfo libosmoctrl-devel libosmoctrl0 libosmoctrl0-debuginfo libosmogb-devel libosmogb11 libosmogb11-debuginfo libosmogsm-devel libosmogsm15 libosmogsm15-debuginfo libosmonetif-devel libosmonetif8 libosmonetif8-debuginfo libosmosim-devel libosmosim2 libosmosim2-debuginfo libosmotrau-devel libosmotrau2 libosmotrau2-debuginfo libosmousb-devel libosmousb0 libosmousb0-debuginfo libosmovty-devel libosmovty4 libosmovty4-debuginfo libpgm-5_2-0 libpgm-5_2-0-debuginfo libsmpp34-1 libsmpp34-1-debuginfo libsmpp34-1-devel libsmpp34-debugsource libsodium-debugsource libsodium-devel libsodium23 libsodium23-debuginfo libsofia-sip-ua-glib3 libsofia-sip-ua-glib3-debuginfo libsofia-sip-ua0 libsofia-sip-ua0-debuginfo libulfius2_7 libulfius2_7-debuginfo libunwind libunwind-debuginfo libunwind-debugsource libunwind-devel libyder1_4 libyder1_4-debuginfo libzmq5 libzmq5-debuginfo openpgm-debugsource openpgm-devel orcania-debugsource orcania-devel ortp-debugsource ortp-devel osmo-bsc osmo-bsc-abisip-find osmo-bsc-abisip-find-debuginfo osmo-bsc-bs11-utils osmo-bsc-bs11-utils-debuginfo osmo-bsc-debuginfo osmo-bsc-debugsource osmo-bsc-ipaccess-utils osmo-bsc-ipaccess-utils-debuginfo osmo-bsc-meas-utils osmo-bsc-meas-utils-debuginfo osmo-bts osmo-bts-debuginfo osmo-bts-debugsource osmo-bts-omldummy osmo-bts-omldummy-debuginfo osmo-bts-virtual osmo-bts-virtual-debuginfo osmo-cbc osmo-cbc-debuginfo osmo-cbc-debugsource osmo-cbc-utils osmo-gbproxy osmo-gbproxy-debuginfo osmo-gbproxy-debugsource osmo-ggsn osmo-ggsn-debuginfo osmo-ggsn-debugsource osmo-gtphub osmo-gtphub-debuginfo osmo-hlr osmo-hlr-debuginfo osmo-hlr-debugsource osmo-iuh osmo-iuh-debuginfo osmo-iuh-debugsource osmo-mgw osmo-mgw-debuginfo osmo-mgw-debugsource osmo-msc osmo-msc-debuginfo osmo-msc-debugsource osmo-mslookup-client osmo-mslookup-client-debuginfo osmo-pcap osmo-pcap-debuginfo osmo-pcap-debugsource osmo-pcu osmo-pcu-debuginfo osmo-pcu-debugsource osmo-remsim-bankd osmo-remsim-bankd-debuginfo osmo-remsim-client-shell osmo-remsim-client-shell-debuginfo osmo-remsim-client-st2 osmo-remsim-client-st2-debuginfo osmo-remsim-debuginfo osmo-remsim-debugsource osmo-remsim-server osmo-remsim-server-debuginfo osmo-sgsn osmo-sgsn-debuginfo osmo-sgsn-debugsource osmo-sip-connector osmo-sip-connector-debuginfo osmo-sip-connector-debugsource osmo-smlc osmo-smlc-debuginfo osmo-smlc-debugsource osmo-stp osmo-stp-debuginfo osmo-trx osmo-trx-debuginfo osmo-trx-debugsource osmo-trx-ipc osmo-trx-ipc-debuginfo osmo-trx-ipc-test osmo-trx-ipc-test-debuginfo osmo-trx-uhd osmo-trx-uhd-debuginfo osmocom-nightly simtrace2 simtrace2-debuginfo simtrace2-debugsource sofia-sip sofia-sip-debuginfo sofia-sip-debugsource sofia-sip-devel uhd uhd-debuginfo uhd-debugsource uhd-devel uhd-doc uhd-firmware uhd-tools uhd-tools-debuginfo ulfius-debuginfo ulfius-debugsource uwsc uwsc-debuginfo yder-debugsource yder-devel zeromq-debuginfo zeromq-debugsource zeromq-devel zeromq-tools zeromq-tools-debuginfo Package libosmocore-devel-1.4.0.487.c318-1.1.x86_64 is already installed. Package libosmocore16-1.4.0.487.c318-1.1.x86_64 is already installed. Package osmocom-nightly-1.0.0.202102110126-1.1.x86_64 is already installed. Error: Problem 1: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by libosmo-ranap-devel-0.6.0.41.f05c-7.1.x86_64 Problem 2: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by libosmo-ranap3-0.6.0.41.f05c-7.1.x86_64 Problem 3: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by libosmo-sabp-devel-0.6.0.41.f05c-7.1.x86_64 Problem 4: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by libosmo-sabp0-0.6.0.41.f05c-7.1.x86_64 Problem 5: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by osmo-gtphub-1.6.0.154.901e-2.1.x86_64 Problem 6: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by osmo-iuh-0.6.0.41.f05c-7.1.x86_64 Problem 7: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by osmo-msc-1.6.1.94.dbb3-2.1.x86_64 Problem 8: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202102100126 needed by osmo-sgsn-1.6.0.154.901e-2.1.x86_64 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + ret=1 + [ -n ] + docker container kill centos8-repo-install-test-nightly centos8-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

4 years, 4 months

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications February 2021