jenkins-notifications December 2021

jenkins-notifications@lists.osmocom.org

1 participants
17 discussions

Build failed in Jenkins: Osmocom_OBS_nightly #1099

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/1099/display/re…> Changes: ------------------------------------------ [...truncated 270.73 KB...] + echo '%postun %service_del_postun osmo-hnbgw.service' + case "$line" in + IFS= + read -r line + echo %endif + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo %files + case "$line" in + IFS= + read -r line + echo '%license COPYING' + case "$line" in + IFS= + read -r line + echo '%doc README.md' + case "$line" in + IFS= + read -r line + echo '%dir %{_docdir}/%{name}/examples' + case "$line" in + IFS= + read -r line + echo '%{_docdir}/%{name}/examples/osmo-hnbgw.cfg' + case "$line" in + IFS= + read -r line + echo '%{_bindir}/osmo-hnbgw' + case "$line" in + IFS= + read -r line + echo '%dir %{_sysconfdir}/osmocom' + case "$line" in + IFS= + read -r line + echo '%config %{_sysconfdir}/osmocom/osmo-hnbgw.cfg' + case "$line" in + IFS= + read -r line + echo '%{_unitdir}/osmo-hnbgw.service' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-hnbap0' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-hnbap.so.0*' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-hnbap-devel' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/hnbap/' + case "$line" in + IFS= + read -r line + echo '%{_includedir}/osmocom/hnbap/*' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-hnbap.so' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/pkgconfig/libosmo-hnbap.pc' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-ranap5' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-ranap.so.5*' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-ranap-devel' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/ranap/' + case "$line" in + IFS= + read -r line + echo '%{_includedir}/osmocom/ranap/*' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-ranap.so' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/pkgconfig/libosmo-ranap.pc' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-rua0' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-rua.so.0*' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-rua-devel' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/rua/' + case "$line" in + IFS= + read -r line + echo '%{_includedir}/osmocom/rua/*' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-rua.so' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/pkgconfig/libosmo-rua.pc' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-sabp1' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-sabp.so.1*' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo '%files -n libosmo-sabp-devel' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/' + case "$line" in + IFS= + read -r line + echo '%dir %{_includedir}/osmocom/sabp/' + case "$line" in + IFS= + read -r line + echo '%{_includedir}/osmocom/sabp/*' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/libosmo-sabp.so' + case "$line" in + IFS= + read -r line + echo '%{_libdir}/pkgconfig/libosmo-sabp.pc' + case "$line" in + IFS= + read -r line + echo '' + case "$line" in + IFS= + read -r line + echo %changelog + case "$line" in + IFS= + read -r line + mv <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh.spec.new <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh.spec ++ cut -d: -f2- ++ grep '^Version: ' <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh_1.1.0.1.9b4d.202112180026.dsc ++ xargs + version=1.1.0.1.9b4d.202112180026 + case $version in + '[' -n '' ']' + sed -i 's/^Version:.*/Version: 1.1.0.1.9b4d.202112180026/g' <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh.spec ++ cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh ++ ls -1 osmo-iuh_1.1.0.1.9b4d.202112180026.tar.xz + tarball=osmo-iuh_1.1.0.1.9b4d.202112180026.tar.xz + sed -i 's/^Source:.*/Source: osmo-iuh_1.1.0.1.9b4d.202112180026.tar.xz/g' <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh.spec + osc add <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh.spec A <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_R…>:osmocom:nightly/osmo-iuh/osmo-iuh.spec + osc ci -m 'Snapshot osmo-iuh 202112180026' --noservice Sending osmo-iuh.spec Deleting osmo-iuh_1.1.0.1.9b4d.202112170026.dsc Deleting osmo-iuh_1.1.0.1.9b4d.202112170026.tar.xz Sending osmo-iuh_1.1.0.1.9b4d.202112180026.tar.xz Sending osmo-iuh_1.1.0.1.9b4d.202112180026.dsc Transmitting file data ...Server returned an error: HTTP Error 503: Service Unavailable Request: https://api.opensuse.org/source/network:osmocom:nightly/osmo-iuh/osmo-iuh_1… Headers: status: 503 Service Unavailable content-length: 189 strict-transport-security: max-age=31536000 server: Apache/2.4.43 (Linux/SUSE) connection: close cache-control: no-cache, no-store, must-revalidate date: Sat, 18 Dec 2021 00:29:50 GMT content-type: text/html; charset=UTF-8 Build step 'Execute shell' marked build as failure

3 years, 7 months

Build failed in Jenkins: Coverity-Upload (jenkins-job-builder) #1447

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/1447/display/redir…> Changes: [Oliver Smith] jobs/ttcn3-testsuites: adjust cmd for centos7 [Oliver Smith] jobs/registry-update-base-images: add centos7 [Oliver Smith] osmocom-release-tarballs: fix missing st2 clone [Oliver Smith] lint: checkpatch: tweak FSF_MAILING_ADDRESS error [Oliver Smith] jobs/octsim_osmo-ccid-firmware: new job ------------------------------------------ [...truncated 1.18 MB...] configure.ac:20: installing './compile' configure.ac:22: installing './config.guess' configure.ac:22: installing './config.sub' configure.ac:8: installing './install-sh' configure.ac:8: installing './missing' lib/Makefile.am: installing './depcomp' + ./configure --prefix=/home/osmocom-build/osmo-ci/coverity/install-Osmocom --with-systemdsystemunitdir=no --disable-doxygen configure: WARNING: unrecognized options: --with-systemdsystemunitdir, --disable-doxygen checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking if gcc supports -fvisibility=hidden... yes checking for LIBOSMOCORE... yes checking for LIBOSMOSIM... yes checking for LIBOSMOUSB... yes checking for LIBUSB... yes CFLAGS="-g -O2 -Wall" CPPFLAGS=" -Wall" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmo-simtrace2.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating lib/Makefile config.status: creating contrib/Makefile config.status: creating contrib/simtrace2.spec config.status: creating Makefile config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-systemdsystemunitdir, --disable-doxygen + make -j 8 echo 0.8.1.2-f721 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' Making all in include make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/include' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/include' Making all in lib make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/lib' CC apdu_dispatch.lo CC gsmtap.lo CC usb_util.lo CC simtrace2_api.lo CCLD libosmo-simtrace2.la ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/lib' Making all in src make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/src' CC simtrace2-cardem-pcsc.o CC simtrace2_usb.o CC simtrace2-sniff.o CC simtrace2-tool.o CCLD simtrace2-list CCLD simtrace2-tool CCLD simtrace2-cardem-pcsc CCLD simtrace2-sniff make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/src' Making all in contrib make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/contrib' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/contrib' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' + make install make install-recursive make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' Making install in include make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/include' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/include' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/include' /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/osmocom/simtrace2' /usr/bin/install -c -m 644 osmocom/simtrace2/apdu_dispatch.h osmocom/simtrace2/simtrace2_api.h osmocom/simtrace2/simtrace_usb.h osmocom/simtrace2/simtrace_prot.h osmocom/simtrace2/usb_util.h osmocom/simtrace2/gsmtap.h '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/osmocom/simtrace2' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/include' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/include' Making install in lib make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/lib' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/lib' /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libosmo-simtrace2.la '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib' libtool: install: /usr/bin/install -c .libs/libosmo-simtrace2.so.1.0.0 /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/libosmo-simtrace2.so.1.0.0 libtool: install: (cd /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib && { ln -s -f libosmo-simtrace2.so.1.0.0 libosmo-simtrace2.so.1 || { rm -f libosmo-simtrace2.so.1 && ln -s libosmo-simtrace2.so.1.0.0 libosmo-simtrace2.so.1; }; }) libtool: install: (cd /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib && { ln -s -f libosmo-simtrace2.so.1.0.0 libosmo-simtrace2.so || { rm -f libosmo-simtrace2.so && ln -s libosmo-simtrace2.so.1.0.0 libosmo-simtrace2.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmo-simtrace2.lai /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/libosmo-simtrace2.la libtool: install: /usr/bin/install -c .libs/libosmo-simtrace2.a /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/libosmo-simtrace2.a libtool: install: chmod 644 /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/libosmo-simtrace2.a libtool: install: ranlib /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/libosmo-simtrace2.a libtool: finish: PATH="/home/osmocom-build/osmo-ci/coverity/cov-analysis-linux64-8.5.0/bin/:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/opt/coverity/current/bin:/sbin" ldconfig -n /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/lib' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/lib' Making install in src make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/src' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/src' /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c simtrace2-cardem-pcsc simtrace2-list simtrace2-sniff simtrace2-tool '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin' libtool: install: /usr/bin/install -c .libs/simtrace2-cardem-pcsc /home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin/simtrace2-cardem-pcsc libtool: install: /usr/bin/install -c .libs/simtrace2-list /home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin/simtrace2-list libtool: install: /usr/bin/install -c .libs/simtrace2-sniff /home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin/simtrace2-sniff libtool: install: /usr/bin/install -c .libs/simtrace2-tool /home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin/simtrace2-tool make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/src' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/src' Making install in contrib make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/contrib' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/contrib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/contrib' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host/contrib' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/pkgconfig' /usr/bin/install -c -m 644 libosmo-simtrace2.pc '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/lib/pkgconfig' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/simtrace2/host' + popd ~/osmo-ci/coverity/source-Osmocom Emitted 3093 C/C++ compilation units (100%) successfully 3093 C/C++ compilation units (100%) are ready for analysis The cov-build utility completed successfully. + cd /home/osmocom-build/osmo-ci/coverity/source-Osmocom + rm -f Osmocom.tgz + tar czf Osmocom.tgz cov-int + set +x curl \ --form token="$token" \ --form email=holger(a)freyther.de --form file=(a)Osmocom.tgz \ --form version=Version --form description=AutoUpload \ https://scan.coverity.com/builds?project=Osmocom % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (60) SSL certificate problem: unable to get local issuer certificate More details here: https://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option. Build step 'Execute shell' marked build as failure

3 years, 7 months

Build failed in Jenkins: master-asn1c » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #1434

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-asn1c/a1=default,a2=default,…> Changes: ------------------------------------------ [...truncated 3.18 KB...] checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs mkdir .libs mkdir: cannot create directory '.libs': File exists gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/libasn1parser' make[1]: *** [all-recursive] Error 1 Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:212: recipe for target 'all' failed Build step 'Execute shell' marked build as failure

3 years, 7 months

Build failed in Jenkins: Osmocom-release-tarballs #920

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/920/displa…> Changes: [Oliver Smith] OSMO_RELEASE_REPOS: sort [Oliver Smith] OSMO_RELEASE_REPOS: sync with Nov 2021 releases [Oliver Smith] OSMO_RELEASE_REPOS: add simtrace2, osmo-remsim ------------------------------------------ [...truncated 250.03 KB...] if test -d "osmo-gsm-manuals-0.1.1"; then find "osmo-gsm-manuals-0.1.1" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-gsm-manuals-0.1.1" || { sleep 5 && rm -rf "osmo-gsm-manuals-0.1.1"; }; else :; fi + set +x osmo-gsm-manuals-0.2.0.tar.bz2 (creating) + prepare_repo osmo-gsm-manuals 0.2.0 + local repo=osmo-gsm-manuals + local tag=0.2.0 + [ -d /osmo-ci/_temp/repos/osmo-gsm-manuals ] + cd /osmo-ci/_temp/repos/osmo-gsm-manuals + git clean -qdxf + git reset --hard HEAD HEAD is now at 001c578 Bump version: 0.1.0.8-09689 → 0.1.1 + git checkout -q 0.2.0 + prepare_depends osmo-gsm-manuals + cd /osmo-ci/_temp/repos/osmo-gsm-manuals + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:17: installing './compile' configure.ac:17: installing './config.guess' configure.ac:17: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes All dependencies installed! checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating osmo-gsm-manuals.pc config.status: creating Makefile config.status: creating tests/Makefile config.status: executing depfiles commands config.status: executing libtool commands + fix_repo osmo-gsm-manuals + make dist-bzip2 echo 0.2.0 > .version-t && mv .version-t .version if test -d "osmo-gsm-manuals-0.2.0"; then find "osmo-gsm-manuals-0.2.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-gsm-manuals-0.2.0" || { sleep 5 && rm -rf "osmo-gsm-manuals-0.2.0"; }; else :; fi test -d "osmo-gsm-manuals-0.2.0" || mkdir "osmo-gsm-manuals-0.2.0" (cd tests && make top_distdir=../osmo-gsm-manuals-0.2.0 distdir=../osmo-gsm-manuals-0.2.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[1]: Entering directory '/osmo-ci/_temp/repos/osmo-gsm-manuals/tests' make[1]: Leaving directory '/osmo-ci/_temp/repos/osmo-gsm-manuals/tests' make \ top_distdir="osmo-gsm-manuals-0.2.0" distdir="osmo-gsm-manuals-0.2.0" \ dist-hook make[1]: Entering directory '/osmo-ci/_temp/repos/osmo-gsm-manuals' echo 0.2.0 > osmo-gsm-manuals-0.2.0/.tarball-version make[1]: Leaving directory '/osmo-ci/_temp/repos/osmo-gsm-manuals' test -n "" \ || find "osmo-gsm-manuals-0.2.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /osmo-ci/_temp/repos/osmo-gsm-manuals/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "osmo-gsm-manuals-0.2.0" tardir=osmo-gsm-manuals-0.2.0 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-gsm-manuals-0.2.0.tar.bz2 if test -d "osmo-gsm-manuals-0.2.0"; then find "osmo-gsm-manuals-0.2.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-gsm-manuals-0.2.0" || { sleep 5 && rm -rf "osmo-gsm-manuals-0.2.0"; }; else :; fi + set +x osmo-gsm-manuals-0.3.0.tar.bz2 (creating) + prepare_repo osmo-gsm-manuals 0.3.0 + local repo=osmo-gsm-manuals + local tag=0.3.0 + [ -d /osmo-ci/_temp/repos/osmo-gsm-manuals ] + cd /osmo-ci/_temp/repos/osmo-gsm-manuals + git clean -qdxf + git reset --hard HEAD HEAD is now at 2333c9f Bump version: 0.1.1.9-5275 → 0.2.0 + git checkout -q 0.3.0 + prepare_depends osmo-gsm-manuals + cd /osmo-ci/_temp/repos/osmo-gsm-manuals + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:17: installing './compile' configure.ac:17: installing './config.guess' configure.ac:17: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes Binary 'packetdiag3' not found in path, please install python3-nwdiag. configure: error: "missing dependencies!" Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 27312 killed; [ssh-agent] Stopped.

3 years, 7 months

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #7155

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 202.17 KB...] OsmoHLR# subscriber imsi 123456789023000 update network-access-mode none OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none CS disabled PS disabled OsmoHLR# subscriber imsi 123456789023000 update network-access-mode cs OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none PS disabled OsmoHLR# subscriber imsi 123456789023000 update network-access-mode ps OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none CS disabled OsmoHLR# subscriber imsi 123456789023000 update network-access-mode cs+ps OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none OsmoHLR# subscriber imsi 123456789023000 delete % Deleted subscriber for IMSI '123456789023000' 20211211160752021 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Terminating due to signal=15 (hlr.c:719) full talloc report on 'OsmoHLR' (total 798 bytes in 17 blocks) telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b00012d770 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b000116640 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f00000d2a0 dgsm contains 40 bytes in 2 blocks (ref 0) 0x60800000be80 struct osmo_mslookup_client contains 40 bytes in 1 blocks (ref 0) 0x60d00002a570 struct hlr contains 674 bytes in 10 blocks (ref 0) 0x61600000fce0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x6100000063a0 hlr_vty_test.db contains 16 bytes in 1 blocks (ref 0) 0x60b0001146a0 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d00002c450 *#101# contains 7 bytes in 1 blocks (ref 0) 0x60b000114750 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d00002c520 *#100# contains 7 bytes in 1 blocks (ref 0) 0x60b000114f90 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001157d0 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c00000bf20 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c00000bfe0 msgb contains 0 bytes in 1 blocks (ref 0) 0x60800000bf00 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c0000332e0 RESULTS: pass: ./test_nodes.vty pass: ./test_subscr_create_on_demand.vty pass: ./test_subscriber.vty rm -f hlr_vty_test.db hlr_vty_test.db-* make[6]: Leaving directory '/build/tests' make ctrl-test make[6]: Entering directory '/build/tests' rm -f hlr_ctrl_test.db sqlite3 hlr_ctrl_test.db < ../sql/hlr.sql sqlite3 hlr_ctrl_test.db < ./test_subscriber.sql osmo_verify_transcript_ctrl.py -v \ -p 4259 \ -r "../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db" \ ./*.ctrl 20211211160753067 [1;33mDMAIN[0;m [1;33mNOTICE[0;m hlr starting (hlr.c:791) [1;31m20211211160753067 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m using database: hlr_ctrl_test.db (db.c:558) [0;m Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 356, in verify_application interact.connect() File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/ctrl.py", line 64, in connect super().connect() File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 88, in connect self.socket.connect((self.host, int(self.port))) ConnectionRefusedError: [Errno 111] Connection refused Launching: cd '/build/tests'; ../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db Terminating took 1.415s 20211211160757999 [1;33mDMAIN[0;m [1;33mNOTICE[0;m hlr starting (hlr.c:791) [1;31m20211211160757999 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m using database: hlr_ctrl_test.db (db.c:558) [0;m [1;31m20211211160758322 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database 'hlr_ctrl_test.db' has HLR DB schema version 6 (db.c:636) [0;m 20211211160758325 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4258 (telnet_interface.c:104) [38;5;33m20211211160758325 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4259 (control_if.c:1017) [0;m Launching: cd '/build/tests'; ../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db GET 1 invalid ERROR 1 Command not found SET 2 invalid nonsense ERROR 2 Command not found GET 3 subscriber.by-imsi-nonsense.info ERROR 3 Invalid value part of 'by-xxx-value' selector. GET 4 subscriber.by-msisdn-nonsense.info ERROR 4 Invalid value part of 'by-xxx-value' selector. GET 5 subscriber.by-id-nonsense.info ERROR 5 Invalid value part of 'by-xxx-value' selector. GET 6 subscriber ERROR 6 Command not present. GET 7 subscriber. ERROR 7 Command not present. GET 8 subscriber.by-nonsense ERROR 8 Command not present. GET 9 subscriber.by-nonsense- ERROR 9 Command not present. GET 10 subscriber.by-nonsense-123456 ERROR 10 Command not present. GET 11 subscriber.by-nonsense-123456. ERROR 11 Command not present. GET 12 subscriber.by-imsi- ERROR 12 Command not present. GET 13 subscriber.by-imsi-. ERROR 13 Command not present. GET 14 subscriber.by-imsi-901990000000003 ERROR 14 Command not present. GET 15 subscriber.by-imsi-901990000000003. ERROR 15 Command not present. GET 16 subscriber.by-nonsense-123456.info ERROR 16 Not a known subscriber 'by-xxx-' selector. GET 17 subscriber.by-123456.info ERROR 17 Not a known subscriber 'by-xxx-' selector. GET 18 subscriber.by-imsi-.info ERROR 18 Invalid value part of 'by-xxx-value' selector. GET 19 subscriber.by-imsi--.info ERROR 19 Invalid value part of 'by-xxx-value' selector. GET 20 subscriber.by-imsi-12345678901234567.info ERROR 20 Invalid value part of 'by-xxx-value' selector. GET 21 subscriber.by-imsi-12345.info ERROR 21 Invalid value part of 'by-xxx-value' selector. GET 22 subscriber.by-imsi-1234567890123456.info ERROR 22 Invalid value part of 'by-xxx-value' selector. GET 23 subscriber.by-id-99999999999999999999999999.info ERROR 23 Invalid value part of 'by-xxx-value' selector. GET 24 subscriber.by-id-9223372036854775807.info ERROR 24 No such subscriber. GET 25 subscriber.by-id-9223372036854775808.info ERROR 25 Invalid value part of 'by-xxx-value' selector. GET 26 subscriber.by-id--1.info ERROR 26 No such subscriber. GET 27 subscriber.by-id--9223372036854775808.info ERROR 27 No such subscriber. GET 28 subscriber.by-id--9223372036854775809.info ERROR 28 Invalid value part of 'by-xxx-value' selector. GET 29 subscriber.by-id-1+1.info [38;5;33m20211211160758384 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-1+1.info" (control_cmd.c:409) [0;m ERROR 29 GET variable contains invalid characters GET 30 subscriber.by-id--.info ERROR 30 Invalid value part of 'by-xxx-value' selector. GET 31 subscriber.by-id-+1.info [38;5;33m20211211160758384 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+1.info" (control_cmd.c:409) [0;m ERROR 31 GET variable contains invalid characters GET 32 subscriber.by-id-+-1.info [38;5;33m20211211160758385 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+-1.info" (control_cmd.c:409) [0;m ERROR 32 GET variable contains invalid characters GET 33 subscriber.by-id--+1.info [38;5;33m20211211160758385 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id--+1.info" (control_cmd.c:409) [0;m ERROR 33 GET variable contains invalid characters GET 34 subscriber.by-id-++1.info [38;5;33m20211211160758385 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-++1.info" (control_cmd.c:409) [0;m ERROR 34 GET variable contains invalid characters GET 35 subscriber.by-id---1.info ERROR 35 Invalid value part of 'by-xxx-value' selector. GET 36 subscriber.by-id- 1.info [38;5;33m20211211160758385 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET with trailing characters: "1.info" (control_cmd.c:418) [0;m ERROR 36 GET with trailing characters GET 37 subscriber.by-id-+ 1.info [38;5;33m20211211160758385 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+" (control_cmd.c:409) [0;m ERROR 37 GET variable contains invalid characters GET 38 subscriber.by-id-- 1.info [38;5;33m20211211160758386 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET with trailing characters: "1.info" (control_cmd.c:418) [0;m ERROR 38 GET with trailing characters SET 39 subscriber.by-imsi-901990000000001.info foo ERROR 39 Read Only attribute SET 40 subscriber.by-imsi-901990000000001.info-aud foo ERROR 40 Read Only attribute SET 41 subscriber.by-imsi-901990000000001.info-all foo ERROR 41 Read Only attribute SET 42 subscriber.by-imsi-901990000000001.ps-enabled nonsense ERROR 42 Value failed verification. SET 43 subscriber.by-imsi-901990000000001.cs-enabled nonsense ERROR 43 Value failed verification. SET 44 subscriber.by-imsi-901990000000001.ps-enabled [38;5;33m20211211160758387 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m SET Command incomplete (control_cmd.c:429) [0;m ERROR 44 SET incomplete SET 45 subscriber.by-imsi-901990000000001.cs-enabled [38;5;33m20211211160758387 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m SET Command incomplete (control_cmd.c:429) [0;m ERROR 45 SET incomplete GET 46 subscriber.by-imsi-1234567890123456.ps-enabled ERROR 46 Invalid value part of 'by-xxx-value' selector. GET 47 subscriber.by-imsi-1234567890123456.cs-enabled ERROR 47 Invalid value part of 'by-xxx-value' selector. 20211211160758387 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Terminating due to signal=15 (hlr.c:719) full talloc report on 'OsmoHLR' (total 799 bytes in 17 blocks) telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b00012d8d0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b000116640 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f00000d2a0 dgsm contains 40 bytes in 2 blocks (ref 0) 0x60800000be80 struct osmo_mslookup_client contains 40 bytes in 1 blocks (ref 0) 0x60d00002a570 struct hlr contains 675 bytes in 10 blocks (ref 0) 0x61600000fce0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x6100000063a0 hlr_ctrl_test.db contains 17 bytes in 1 blocks (ref 0) 0x60c000036a60 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d00002c450 *#101# contains 7 bytes in 1 blocks (ref 0) 0x60b000114750 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d00002c520 *#100# contains 7 bytes in 1 blocks (ref 0) 0x60b000114f90 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001157d0 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c00000bf20 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c00000bfe0 msgb contains 0 bytes in 1 blocks (ref 0) 0x60800000bf00 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c000033160 RESULTS: FAIL: ./test_subscriber.ctrl pass: ./test_subscriber_errors.ctrl make[6]: *** [ctrl-test] Error 1 Makefile:717: recipe for target 'ctrl-test' failed make[6]: Leaving directory '/build/tests' Makefile:693: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 2 Makefile:731: recipe for target 'check-local' failed make[4]: *** [check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:552: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' Makefile:404: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:487: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [check-recursive] Error 1 Makefile:778: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure

3 years, 7 months

Build failed in Jenkins: Osmocom-repo-install-centos8 » nightly,repo-install-test #394

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-centos8/feed=n…> Changes: ------------------------------------------ [...truncated 12.29 KB...] install_repo_packages test_binaries services_check ' ']' + echo 'Enabled tests: test_conflict install_repo_packages test_binaries services_check ' + configure_keep_cache Enabled tests: test_conflict install_repo_packages test_binaries services_check + '[' -z '' ']' + return + configure_osmocom_repo network:osmocom:nightly + case "$DISTRO" in + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ echo network:osmocom:nightly ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightl… + echo 'Configuring Osmocom repository' Configuring Osmocom repository + cat ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + for test in $TESTS + set +x + case "$test" in + test_conflict ### Running test: test_conflict ### + case "$DISTRO" in + test_conflict_centos + dnf -y install libosmocore-devel CentOS Linux 8 - AppStream 104 kB/s | 4.3 kB 00:00 CentOS Linux 8 - AppStream 39 MB/s | 8.2 MB 00:00 CentOS Linux 8 - BaseOS 17 kB/s | 3.9 kB 00:00 CentOS Linux 8 - BaseOS 20 MB/s | 3.5 MB 00:00 CentOS Linux 8 - Extras 29 kB/s | 1.5 kB 00:00 CentOS Linux 8 - Extras 121 kB/s | 10 kB 00:00 CentOS Linux 8 - PowerTools 8.2 MB/s | 2.3 MB 00:00 network:osmocom:nightly 510 kB/s | 228 kB 00:00 Dependencies resolved. ============================================================================================ Package Arch Version Repository Size ============================================================================================ Installing: libosmocore-devel x86_64 1.6.0.17.63e1b.202112100026-1.1 network_osmocom_nightly 74 k Installing dependencies: libosmocore18 x86_64 1.6.0.17.63e1b.202112100026-1.1 network_osmocom_nightly 102 k libpkgconf x86_64 1.4.2-1.el8 baseos 35 k libtalloc x86_64 2.3.2-1.el8 baseos 49 k libtalloc-devel x86_64 2.3.2-1.el8 baseos 63 k lksctp-tools x86_64 1.0.18-3.el8 baseos 100 k osmocom-nightly x86_64 1.0.0.202112100026-1.1 network_osmocom_nightly 7.0 k pkgconf x86_64 1.4.2-1.el8 baseos 38 k pkgconf-m4 noarch 1.4.2-1.el8 baseos 17 k pkgconf-pkg-config x86_64 1.4.2-1.el8 baseos 15 k Transaction Summary ============================================================================================ Install 10 Packages Total download size: 500 k Installed size: 1.0 M Downloading Packages: (1/10): libpkgconf-1.4.2-1.el8.x86_64.rpm 905 kB/s | 35 kB 00:00 (2/10): libtalloc-2.3.2-1.el8.x86_64.rpm 974 kB/s | 49 kB 00:00 (3/10): libtalloc-devel-2.3.2-1.el8.x86_64.rpm 1.2 MB/s | 63 kB 00:00 (4/10): pkgconf-1.4.2-1.el8.x86_64.rpm 2.2 MB/s | 38 kB 00:00 (5/10): lksctp-tools-1.0.18-3.el8.x86_64.rpm 3.2 MB/s | 100 kB 00:00 (6/10): pkgconf-m4-1.4.2-1.el8.noarch.rpm 958 kB/s | 17 kB 00:00 (7/10): pkgconf-pkg-config-1.4.2-1.el8.x86_64.r 1.2 MB/s | 15 kB 00:00 (8/10): libosmocore-devel-1.6.0.17.63e1b.202112 982 kB/s | 74 kB 00:00 (9/10): osmocom-nightly-1.0.0.202112100026-1.1. 108 kB/s | 7.0 kB 00:00 (10/10): libosmocore18-1.6.0.17.63e1b.202112100 1.2 MB/s | 102 kB 00:00 -------------------------------------------------------------------------------- Total 2.7 MB/s | 500 kB 00:00 warning: /var/cache/dnf/network_osmocom_nightly-8d6c2c122a187e40/packages/libosmocore-devel-1.6.0.17.63e1b.202112100026-1.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 17280ddf: NOKEY network:osmocom:nightly 22 kB/s | 1.1 kB 00:00 Importing GPG key 0x17280DDF: Userid : "network OBS Project <network(a)build.opensuse.org>" Fingerprint: 0080 689B E757 A876 CB7D C269 62EB 1A09 1728 0DDF From : https://download.opensuse.org/repositories/network:/osmocom:/nightly/CentOS… Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : osmocom-nightly-1.0.0.202112100026-1.1.x86_64 1/10 Installing : libtalloc-2.3.2-1.el8.x86_64 2/10 Installing : pkgconf-m4-1.4.2-1.el8.noarch 3/10 Installing : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Running scriptlet: lksctp-tools-1.0.18-3.el8.x86_64 4/10 Installing : libosmocore18-1.6.0.17.63e1b.202112100026-1.1.x86_ 5/10 Running scriptlet: libosmocore18-1.6.0.17.63e1b.202112100026-1.1.x86_ 5/10 Installing : libpkgconf-1.4.2-1.el8.x86_64 6/10 Installing : pkgconf-1.4.2-1.el8.x86_64 7/10 Installing : pkgconf-pkg-config-1.4.2-1.el8.x86_64 8/10 Installing : libtalloc-devel-2.3.2-1.el8.x86_64 9/10 Installing : libosmocore-devel-1.6.0.17.63e1b.202112100026-1.1. 10/10 Running scriptlet: libosmocore-devel-1.6.0.17.63e1b.202112100026-1.1. 10/10 Verifying : libpkgconf-1.4.2-1.el8.x86_64 1/10 Verifying : libtalloc-2.3.2-1.el8.x86_64 2/10 Verifying : libtalloc-devel-2.3.2-1.el8.x86_64 3/10 Verifying : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Verifying : pkgconf-1.4.2-1.el8.x86_64 5/10 Verifying : pkgconf-m4-1.4.2-1.el8.noarch 6/10 Verifying : pkgconf-pkg-config-1.4.2-1.el8.x86_64 7/10 Verifying : libosmocore-devel-1.6.0.17.63e1b.202112100026-1.1. 8/10 Verifying : libosmocore18-1.6.0.17.63e1b.202112100026-1.1.x86_ 9/10 Verifying : osmocom-nightly-1.0.0.202112100026-1.1.x86_64 10/10 Installed: libosmocore-devel-1.6.0.17.63e1b.202112100026-1.1.x86_64 libosmocore18-1.6.0.17.63e1b.202112100026-1.1.x86_64 libpkgconf-1.4.2-1.el8.x86_64 libtalloc-2.3.2-1.el8.x86_64 libtalloc-devel-2.3.2-1.el8.x86_64 lksctp-tools-1.0.18-3.el8.x86_64 osmocom-nightly-1.0.0.202112100026-1.1.x86_64 pkgconf-1.4.2-1.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch pkgconf-pkg-config-1.4.2-1.el8.x86_64 Complete! + configure_osmocom_repo_centos_remove network:osmocom:nightly + local proj=network:osmocom:nightly + rm /etc/yum.repos.d/network:osmocom:nightly.repo + configure_osmocom_repo_centos network:osmocom:next + local proj=network:osmocom:next ++ proj_with_slashes network:osmocom:next ++ echo network:osmocom:next ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/next/C… + echo 'Configuring Osmocom repository' Configuring Osmocom repository + cat ++ proj_with_underscore network:osmocom:next ++ echo network:osmocom:next ++ tr : _ + dnf -y install osmo-mgw + tee /tmp/out network:osmocom:next 623 kB/s | 229 kB 00:00 Error: Problem: package osmo-mgw-1.9.0.5.7c0fe3.202111220040-1.1.x86_64 requires osmocom-next = 1.0.0.202111220040, but none of the providers can be installed - package osmocom-nightly-1.0.0.202112100026-1.1.x86_64 conflicts with osmocom-next provided by osmocom-next-1.0.0.202111220040-1.1.x86_64 - package osmocom-next-1.0.0.202111220040-1.1.x86_64 conflicts with osmocom-nightly provided by osmocom-nightly-1.0.0.202112100026-1.1.x86_64 - cannot install the best candidate for the job - problem with installed package osmocom-nightly-1.0.0.202112100026-1.1.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + '[' -e /tmp/fail ']' + find_patterns_or_exit /tmp/out '^Error:' 'but none of the providers can be installed' 'conflicts with osmocom-' + local file=/tmp/out + local pattern + shift + for pattern in "$@" + grep -q '^Error:' /tmp/out + continue + for pattern in "$@" + grep -q 'but none of the providers can be installed' /tmp/out + continue + for pattern in "$@" + grep -q 'conflicts with osmocom-' /tmp/out + continue + configure_osmocom_repo_centos_remove network:osmocom:next + local proj=network:osmocom:next + rm /etc/yum.repos.d/network:osmocom:next.repo + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ echo network:osmocom:nightly ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightl… + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + set +x + for test in $TESTS ### Test successful: test_conflict ### + set +x ### Running test: install_repo_packages ### + case "$test" in + install_repo_packages + case "$DISTRO" in + install_repo_packages_centos Installing all repository packages + echo 'Installing all repository packages' ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + LANG=C.UTF-8 + repoquery --quiet --repoid=network_osmocom_nightly --archlist=x86_64,noarch '--qf=%{name}' + filter_packages_txt + grep -v '^#' /repo-install-test/blacklist_centos8.txt + sort -u + comm -23 osmocom_packages_all.txt blacklist.txt ++ cat osmocom_packages.txt + dnf install -y fdupes fdupes-debuginfo fdupes-debugsource gtp-echo-responder gtp-echo-responder-debuginfo libasn1c-debugsource libasn1c-devel libasn1c1 libasn1c1-debuginfo libcsv-debugsource libcsv-devel libcsv3 libcsv3-debuginfo libdbi libdbi-dbd-mysql libdbi-dbd-mysql-debuginfo libdbi-dbd-pgsql libdbi-dbd-pgsql-debuginfo libdbi-dbd-sqlite libdbi-dbd-sqlite-debuginfo libdbi-debuginfo libdbi-debugsource libdbi-devel libdbi-doc libdbi-drivers libdbi-drivers-debuginfo libdbi-drivers-debugsource libgtp-devel libgtp6 libgtp6-debuginfo libgtpnl-debuginfo libgtpnl-debugsource libgtpnl-devel libgtpnl-tools libgtpnl-tools-debuginfo libgtpnl0 libgtpnl0-debuginfo libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-debuginfo liborcania2_2 liborcania2_2-debuginfo libortp9 libortp9-debuginfo libosmo-abis-debuginfo libosmo-abis-debugsource libosmo-gsup-client-devel libosmo-gsup-client-devel-debuginfo libosmo-gsup-client0 libosmo-gsup-client0-debuginfo libosmo-hnbap-devel libosmo-hnbap0 libosmo-hnbap0-debuginfo libosmo-mgcp-client-devel libosmo-mgcp-client9 libosmo-mgcp-client9-debuginfo libosmo-mgcp-devel libosmo-mslookup-devel libosmo-mslookup0 libosmo-mslookup0-debuginfo libosmo-mtp-devel libosmo-netif-debugsource libosmo-ranap-devel libosmo-ranap5 libosmo-ranap5-debuginfo libosmo-rspro-devel libosmo-rspro1 libosmo-rspro1-debuginfo libosmo-rua-devel libosmo-rua0 libosmo-rua0-debuginfo libosmo-sabp-devel libosmo-sabp1 libosmo-sabp1-debuginfo libosmo-sccp-debuginfo libosmo-sccp-debugsource libosmo-sccp-devel libosmo-sigtran-devel libosmo-sigtran7 libosmo-sigtran7-debuginfo libosmo-simtrace2-0 libosmo-simtrace2-0-debuginfo libosmo-simtrace2-devel libosmo-xua-devel libosmoabis-devel libosmoabis10 libosmoabis10-debuginfo libosmocodec-devel libosmocodec0 libosmocodec0-debuginfo libosmocoding-devel libosmocoding0 libosmocoding0-debuginfo libosmocore-debuginfo libosmocore-debugsource libosmocore-devel libosmocore-tools libosmocore-tools-debuginfo libosmocore18 libosmocore18-debuginfo libosmoctrl-devel libosmoctrl0 libosmoctrl0-debuginfo libosmogb-devel libosmogb12 libosmogb12-debuginfo libosmogsm-devel libosmogsm17 libosmogsm17-debuginfo libosmonetif-devel libosmonetif8 libosmonetif8-debuginfo libosmosim-devel libosmosim2 libosmosim2-debuginfo libosmotrau-devel libosmotrau2 libosmotrau2-debuginfo libosmousb-devel libosmousb0 libosmousb0-debuginfo libosmovty-devel libosmovty9 libosmovty9-debuginfo libpgm-5_2-0 libpgm-5_2-0-debuginfo libsmpp34-1 libsmpp34-1-debuginfo libsmpp34-1-devel libsmpp34-debugsource libsodium-debugsource libsodium-devel libsodium23 libsodium23-debuginfo libsofia-sip-ua-glib3 libsofia-sip-ua-glib3-debuginfo libsofia-sip-ua0 libsofia-sip-ua0-debuginfo libulfius2_7 libulfius2_7-debuginfo libunwind libunwind-debuginfo libunwind-debugsource libunwind-devel libyder1_4 libyder1_4-debuginfo libzmq5 libzmq5-debuginfo openpgm-debugsource openpgm-devel orcania-debuginfo orcania-debugsource orcania-devel orcania-devel-debuginfo ortp-debugsource ortp-devel osmo-bsc osmo-bsc-abisip-find osmo-bsc-abisip-find-debuginfo osmo-bsc-bs11-utils osmo-bsc-bs11-utils-debuginfo osmo-bsc-debuginfo osmo-bsc-debugsource osmo-bsc-ipaccess-utils osmo-bsc-ipaccess-utils-debuginfo osmo-bsc-meas-utils osmo-bsc-meas-utils-debuginfo osmo-bts osmo-bts-debuginfo osmo-bts-debugsource osmo-bts-omldummy osmo-bts-omldummy-debuginfo osmo-bts-virtual osmo-bts-virtual-debuginfo osmo-cbc osmo-cbc-debuginfo osmo-cbc-debugsource osmo-cbc-utils osmo-gbproxy osmo-gbproxy-debuginfo osmo-gbproxy-debugsource osmo-ggsn osmo-ggsn-debuginfo osmo-ggsn-debugsource osmo-gtphub osmo-gtphub-debuginfo osmo-hlr osmo-hlr-debuginfo osmo-hlr-debugsource osmo-hnodeb osmo-hnodeb-debuginfo osmo-hnodeb-debugsource osmo-iuh osmo-iuh-debuginfo osmo-iuh-debugsource osmo-mgw osmo-mgw-debuginfo osmo-mgw-debugsource osmo-msc osmo-msc-debuginfo osmo-msc-debugsource osmo-mslookup-client osmo-mslookup-client-debuginfo osmo-pcap osmo-pcap-debuginfo osmo-pcap-debugsource osmo-pcu osmo-pcu-debuginfo osmo-pcu-debugsource osmo-remsim-bankd osmo-remsim-bankd-debuginfo osmo-remsim-client-shell osmo-remsim-client-shell-debuginfo osmo-remsim-client-st2 osmo-remsim-client-st2-debuginfo osmo-remsim-debuginfo osmo-remsim-debugsource osmo-remsim-server osmo-remsim-server-debuginfo osmo-sgsn osmo-sgsn-debuginfo osmo-sgsn-debugsource osmo-sip-connector osmo-sip-connector-debuginfo osmo-sip-connector-debugsource osmo-smlc osmo-smlc-debuginfo osmo-smlc-debugsource osmo-stp osmo-stp-debuginfo osmo-trx osmo-trx-debuginfo osmo-trx-debugsource osmo-trx-ipc osmo-trx-ipc-debuginfo osmo-trx-ipc-test osmo-trx-ipc-test-debuginfo osmo-trx-uhd osmo-trx-uhd-debuginfo osmocom-nightly simtrace2 simtrace2-debuginfo simtrace2-debugsource sofia-sip sofia-sip-debuginfo sofia-sip-debugsource sofia-sip-devel uhd uhd-debuginfo uhd-debugsource uhd-devel uhd-doc uhd-firmware uhd-tools uhd-tools-debuginfo ulfius-debuginfo ulfius-debugsource uwsc uwsc-debuginfo yder-debugsource yder-devel zeromq-debuginfo zeromq-debugsource zeromq-devel zeromq-tools zeromq-tools-debuginfo Last metadata expiration check: 0:00:01 ago on Fri Dec 10 10:04:23 2021. Package libosmocore-devel-1.6.0.17.63e1b.202112100026-1.1.x86_64 is already installed. Package libosmocore18-1.6.0.17.63e1b.202112100026-1.1.x86_64 is already installed. Package osmocom-nightly-1.0.0.202112100026-1.1.x86_64 is already installed. Error: Problem 1: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by libifd-osmo-remsim-client0-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 2: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by libosmo-rspro-devel-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 3: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by libosmo-rspro1-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 4: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by libosmo-simtrace2-0-0.7.0.166.61b4.202112090026-1.1.x86_64 Problem 5: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by libosmo-simtrace2-devel-0.7.0.166.61b4.202112090026-1.1.x86_64 Problem 6: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by osmo-remsim-bankd-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 7: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by osmo-remsim-client-shell-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 8: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by osmo-remsim-client-st2-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 9: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by osmo-remsim-server-0.2.2.122.4612.202112090026-1.1.x86_64 Problem 10: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202112090026 needed by simtrace2-0.7.0.166.61b4.202112090026-1.1.x86_64 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + ret=1 + [ -n ] + docker container kill centos8-repo-install-test-nightly centos8-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

3 years, 7 months

Build failed in Jenkins: master-osmo-pcu » master,0,rpi4-raspbian10,none,False #4445

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 106.91 KB...] CC gprs_bssgp_pcu.lo CC gprs_bssgp_rim.lo CXX gprs_rlcmac.lo CXX gprs_rlcmac_sched.lo CXX gprs_rlcmac_meas.lo CXX gprs_rlcmac_ts_alloc.lo CC gprs_ms.lo CXX gprs_ms_storage.lo CC gprs_pcu.lo CXX pcu_l1_if.lo CC pcu_vty.lo CXX pcu_vty_functions.lo CC mslot_class.lo CC nacc_fsm.lo CC neigh_cache.lo CXX tbf.lo CC tbf_fsm.lo CXX tbf_ul.lo CC tbf_ul_ack_fsm.lo CC tbf_ul_ass_fsm.lo CXX tbf_dl.lo CC tbf_dl_ass_fsm.lo CXX bts.lo CC bts_pch_timer.lo CXX pdch.lo CC pdch_ul_controller.lo CXX encoding.lo CC sba.lo CXX decoding.lo CXX llc.lo CXX rlc.lo CC osmobts_sock.lo CC gprs_codel.lo CC coding_scheme.lo CXX egprs_rlc_compression.lo CXX pcu_main.o CXXLD libgprs.la copying selected object files to avoid basename conflicts... ar: `u' modifier ignored since `D' is the default (see `U') CXXLD osmo-pcu make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/src' Making all in doc make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc' Making all in examples make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc/examples' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc/examples' Making all in manuals make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc/manuals' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc' Making all in tests make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/tests' CXX pcu_emu.o CXX test_replay_gprs_attach.o CC openbsc_clone.o CXX test_pdp_activation.o CXXLD emu/pcu_emu make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/tests' Making all in contrib make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' Making all in systemd make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/contrib/systemd' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub' make[1]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub' Making dvi in include make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/include' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/include' Making dvi in src make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/src' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/src' Making dvi in doc make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc' Making dvi in examples make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc/examples' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc/examples' Making dvi in manuals make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc/manuals' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc' make[3]: Nothing to be done for 'dvi-am'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc' Making dvi in tests make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/tests' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/tests' Making dvi in contrib make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' Making dvi in systemd make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/contrib/systemd' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' make[3]: Nothing to be done for 'dvi-am'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub' make[2]: Nothing to be done for 'dvi-am'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub' make[1]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub' Making check in include make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/include' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/include' Making check in src make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/src' Making check in doc make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc' Making check in examples make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc/examples' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc/examples' Making check in manuals make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc/manuals' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/doc' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/doc' Making check in tests make[2]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/tests' make rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/tests' CXX RLCMACTest.o CXX AllocTest.o CXX MslotTest.o CXX TbfTest.o CXX TypesTest.o CXX MsTest.o CXX LListTest.o CXX LlcTest.o CC codel_test.o CXX EdgeTest.o CXX BitcompTest.o CXX egprs_rlc_compression.o CXX FnTest.o CXX AppInfoTest.o CXX PdchUlcTest.o CXXLD rlcmac/RLCMACTest CXXLD alloc/AllocTest CXXLD alloc/MslotTest CXXLD tbf/TbfTest CXXLD types/TypesTest CXXLD ms/MsTest CXXLD llist/LListTest CXXLD llc/LlcTest CCLD codel/codel_test CXXLD edge/EdgeTest CXXLD bitcomp/BitcompTest CXXLD fn/FnTest CXXLD app_info/AppInfoTest CXXLD ulc/PdchUlcTest make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/tests' make check-local make[3]: Entering directory '/build/osmo-pcu-1.0.0/_build/sub/tests' /bin/bash '../../../tests/testsuite' ## -------------------------- ## ## osmo-pcu 1.0.0 test suite. ## ## -------------------------- ## Regression tests 1: rlcmac ok 2: multi_slot ok 3: ts_alloc ok 4: tbf FAILED (testsuite.at:28) 5: bitcomp ok 6: edge ok 7: types ok 8: ms ok 9: llc ok 10: llist ok 11: codel ok 12: fn ok 13: app_info ok 14: ulc ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 14 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <osmocom-net-gprs(a)lists.osmocom.org> Subject: [osmo-pcu 1.0.0] testsuite: 4 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:1400: recipe for target 'check-local' failed make[3]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/tests' make[3]: *** [check-local] Error 1 make[2]: *** [check-am] Error 2 Makefile:1193: recipe for target 'check-am' failed make[2]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub/tests' make[1]: *** [check-recursive] Error 1 Makefile:419: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build/osmo-pcu-1.0.0/_build/sub' make: *** [distcheck] Error 1 Makefile:624: recipe for target 'distcheck' failed + cat-testlogs.sh ======================== ./osmo-pcu-1.0.0/_build/sub/tests/testsuite.dir/04/testsuite.log # -*- compilation -*- 4. testsuite.at:25: testing tbf ... ../../../tests/testsuite.at:28: $OSMO_QEMU $abs_top_builddir/tests/tbf/TbfTest --- experr 2021-12-02 00:05:10.378021819 +0000 +++ /build/osmo-pcu-1.0.0/_build/sub/tests/testsuite.dir/at-groups/4/stderr 2021-12-02 00:05:12.447969747 +0000 @@ -9154,4 +9154,5 @@ TBF(UL-TFI_-1){ASSIGN}: Deallocated UL_ASS_TBF(UL-TFI_-1){NONE}: Deallocated DL_ASS_TBF(UL-TFI_-1){NONE}: Deallocated +TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) LLC receive timeout, requesting DL ACK === end test_packet_access_rej_prr_no_other_tbfs === stdout: 4. testsuite.at:25: 4. tbf (testsuite.at:25): FAILED (testsuite.at:28) Build step 'Execute shell' marked build as failure

3 years, 7 months

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications December 2021