jenkins-notifications September 2020

jenkins-notifications@lists.osmocom.org

2 participants
34 discussions

Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #19491
by jenkins＠lists.osmocom.org 09 Sep '20

09 Sep '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 736.84 KB...] mgw remote-port <0-65535> mgw endpoint-domain NAME iu rab-assign-addr-enc (x213|v4raw) asn1 debug (1|0) asn1 xer-print (1|0) Error during transcript step 14: [ OsmoMSC(config-msc)# list ... sms-database PATH assign-tmsi mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> paging response-timer (default|<1-65535>) emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip A.B.C.D mgw local-port <0-65535> mgw remote-ip A.B.C.D mgw remote-port <0-65535> ... ] Error while verifying transcript file './test_nodes.vty' <0006> msc_main.c:260 Terminating due to signal 15 [0;mfull talloc report on 'osmo_msc' (total 10448 bytes in 73 blocks) asn1 contains 0 bytes in 1 blocks (ref 0) 0x608000009580 struct osmo_ss7_instance contains 3593 bytes in 31 blocks (ref 0) 0x61400000daa0 struct osmo_sccp_instance contains 359 bytes in 5 blocks (ref 0) 0x612000000ca0 struct osmo_sccp_user contains 93 bytes in 2 blocks (ref 0) 0x60f000008e30 OsmoMSC-IuCS contains 13 bytes in 1 blocks (ref 0) 0x60b0001a0890 struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x60f000008f20 OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x60b0001a0940 struct osmo_ss7_asp contains 2159 bytes in 15 blocks (ref 0) 0x6180000060e0 struct osmo_fsm_inst contains 373 bytes in 4 blocks (ref 0) 0x612000000e20 struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x611000000fa0 XUA_ASP(asp-clnt-OsmoMSC-A-Iu)[0x612000000e20] contains 47 bytes in 1 blocks (ref 0) 0x60d000024c10 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c0000588a0 struct osmo_stream_cli contains 748 bytes in 3 blocks (ref 0) 0x618000005ce0 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001a09f0 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001a0aa0 struct osmo_fsm_inst contains 284 bytes in 4 blocks (ref 0) 0x612000000fa0 struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x60b0001a0b50 xua_default_lm(asp-clnt-OsmoMSC-A-Iu)[0x612000000fa0] contains 54 bytes in 1 blocks (ref 0) 0x60e000032e60 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c000058a20 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001a0c00 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001a0cb0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c000058ae0 struct osmo_ss7_as contains 631 bytes in 6 blocks (ref 0) 0x6130000054a0 struct osmo_fsm_inst contains 370 bytes in 4 blocks (ref 0) 0x612000001120 struct xua_as_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x6110000010e0 XUA_AS(as-clnt-OsmoMSC-A-Iu)[0x612000001120] contains 45 bytes in 1 blocks (ref 0) 0x60d000024ce0 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c000058d20 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c000058de0 struct osmo_ss7_route_table contains 148 bytes in 4 blocks (ref 0) 0x60e000033020 struct osmo_ss7_route contains 85 bytes in 2 blocks (ref 0) 0x60e000032f40 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c000058c60 system contains 7 bytes in 1 blocks (ref 0) 0x60b0001a0d60 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b0001a41a0 struct osmo_stream_srv_link contains 344 bytes in 2 blocks (ref 0) 0x61400000dea0 0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x60b0001a9e70 struct sgs_state contains 376 bytes in 1 blocks (ref 0) 0x61500000f360 struct smsc contains 152 bytes in 1 blocks (ref 0) 0x611000002260 struct gsm_network contains 5629 bytes in 22 blocks (ref 0) 0x6190000055e0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x611000000d20 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x611000000e60 struct mgcp_client contains 680 bytes in 1 blocks (ref 0) 0x6180000064e0 struct gsm_sms_queue contains 216 bytes in 1 blocks (ref 0) 0x612000003820 struct gsup_client_mux contains 666 bytes in 6 blocks (ref 0) 0x6100000061a0 struct osmo_gsup_client contains 514 bytes in 4 blocks (ref 0) 0x613000008220 struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x60d000025df0 struct ipa_client_conn contains 202 bytes in 2 blocks (ref 0) 0x612000008320 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001a31d0 struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x60e0000331e0 struct ctrl_handle contains 80 bytes in 1 blocks (ref 0) 0x60f00000c1c0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001a5900 OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x60b0001a73d0 OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x60b0001a7a00 struct vlr_instance contains 264 bytes in 2 blocks (ref 0) 0x613000009720 struct osmo_nri_ranges contains 16 bytes in 1 blocks (ref 0) 0x60b00017de70 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0000cdd10 stat_item.c:96 contains 144 bytes in 2 blocks (ref 0) 0x60d000011b60 stat_item.c:118 contains 96 bytes in 1 blocks (ref 0) 0x6100000068a0 rate_ctr.c:234 contains 2352 bytes in 1 blocks (ref 0) 0x61e00000f0e0 sms.db contains 7 bytes in 1 blocks (ref 0) 0x60b0000cdf20 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f00000d930 transaction contains 0 bytes in 1 blocks (ref 0) 0x60800000bd00 gsm_call contains 0 bytes in 1 blocks (ref 0) 0x60800000bd80 sms contains 0 bytes in 1 blocks (ref 0) 0x60800000be00 osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x60800000be80 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d000024a70 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d000024b40 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d000024f50 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d000025020 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d000026610 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d0000266e0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002a710 msgb contains 0 bytes in 1 blocks (ref 0) 0x60800000bf00 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c00003cca0 signal 15 received Terminating took 2.679s RESULTS: pass: ./test_neighbor_ident.vty FAIL: ./test_nodes.vty Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 200, in verify_transcript % (match_result, step, step.command_str(), '\n'.join(res))) Exception: Result mismatch: Mismatch: Expect: ' mgw local-ip A.B.C.D' Got: ' mgw local-ip (A.B.C.D|X:X::X:X)' Expected: [ OsmoMSC(config-msc)# list ... sms-database PATH assign-tmsi mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> paging response-timer (default|<1-65535>) emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip A.B.C.D mgw local-port <0-65535> mgw remote-ip A.B.C.D mgw remote-port <0-65535> ... ] Got: [ OsmoMSC(config-msc)# list help list write terminal write file [PATH] write memory write show running-config exit end sms-database PATH assign-tmsi mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> paging response-timer (default|<1-65535>) emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip (A.B.C.D|X:X::X:X) mgw local-port <0-65535> mgw remote-ip (A.B.C.D|X:X::X:X) mgw remote-port <0-65535> mgw endpoint-domain NAME iu rab-assign-addr-enc (x213|v4raw) asn1 debug (1|0) asn1 xer-print (1|0) ] Makefile:732: recipe for target 'vty-transcript-test' failed make[7]: Leaving directory '/build/tests' make[7]: *** [vty-transcript-test] Error 1 make[6]: *** [vty-test] Error 2 Makefile:740: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' Makefile:710: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 2 make[4]: *** [check-local] Error 2 Makefile:763: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:569: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:421: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[1]: *** [check-recursive] Error 1 Makefile:469: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make: *** [check] Error 2 Makefile:760: recipe for target 'check' failed + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 15

Build failed in Jenkins: master-asn1c » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #970
by jenkins＠lists.osmocom.org 08 Sep '20

08 Sep '20

See <https://jenkins.osmocom.org/jenkins/job/master-asn1c/a1=default,a2=default,…> Changes: ------------------------------------------ [...truncated 3.04 KB...] checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 8 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... Makefile:299: recipe for target 'asn1p_y.lo' failed gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 make[2]: Leaving directory '/build/libasn1parser' make[1]: *** [all-recursive] Error 1 Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:212: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 2

Build failed in Jenkins: master-osmo-bts » trx,master,0,default,rpi4-deb9build-ansible #4146
by jenkins＠lists.osmocom.org 07 Sep '20

07 Sep '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> Changes: ------------------------------------------ [...truncated 1.96 KB...] at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to connect to git.osmocom.org: git.osmocom.org[0: 78.46.96.155]: errno=No route to host git.osmocom.org[1: 2a01:4f8:120:8470::2]: errno=Network is unreachable at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2430) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2044) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$500(CliGitAPIImpl.java:81) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:569) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:161) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:154) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:369) at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72) at java.util.concurrent.FutureTask.run(FutureTask.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at java.lang.Thread.run(Thread.java:748) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-deb9build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1788) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:998) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:146) at sun.reflect.GeneratedMethodAccessor280.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:132) at com.sun.proxy.$Proxy58.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:907) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) ERROR: Error fetching remote repo 'origin' Retrying after 10 seconds No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-bts # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-bts > git --version # timeout=10 > git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from git://git.osmocom.org/osmo-bts at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:909) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to connect to git.osmocom.org: git.osmocom.org[0: 78.46.96.155]: errno=Connection timed out git.osmocom.org[1: 2a01:4f8:120:8470::2]: errno=Network is unreachable at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2430) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2044) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$500(CliGitAPIImpl.java:81) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:569) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:161) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:154) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:369) at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72) at java.util.concurrent.FutureTask.run(FutureTask.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at java.lang.Thread.run(Thread.java:748) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-deb9build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1788) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:998) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:146) at sun.reflect.GeneratedMethodAccessor280.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:132) at com.sun.proxy.$Proxy58.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:907) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) ERROR: Error fetching remote repo 'origin' Retrying after 10 seconds No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-bts # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-bts > git --version # timeout=10 > git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from git://git.osmocom.org/osmo-bts at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:909) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to connect to git.osmocom.org: git.osmocom.org[0: 78.46.96.155]: errno=No route to host git.osmocom.org[1: 2a01:4f8:120:8470::2]: errno=Network is unreachable at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2430) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2044) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$500(CliGitAPIImpl.java:81) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:569) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:161) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:154) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:369) at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72) at java.util.concurrent.FutureTask.run(FutureTask.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at java.lang.Thread.run(Thread.java:748) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-deb9build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1788) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:998) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:146) at sun.reflect.GeneratedMethodAccessor280.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:132) at com.sun.proxy.$Proxy58.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:907) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) ERROR: Error fetching remote repo 'origin' Retrying after 10 seconds No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-bts # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-bts > git --version # timeout=10 > git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from git://git.osmocom.org/osmo-bts at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:909) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to connect to git.osmocom.org: git.osmocom.org[0: 78.46.96.155]: errno=Connection timed out git.osmocom.org[1: 2a01:4f8:120:8470::2]: errno=Network is unreachable at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2430) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2044) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$500(CliGitAPIImpl.java:81) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:569) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:161) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:154) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:369) at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72) at java.util.concurrent.FutureTask.run(FutureTask.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at java.lang.Thread.run(Thread.java:748) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-deb9build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1788) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:998) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:146) at sun.reflect.GeneratedMethodAccessor280.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:132) at com.sun.proxy.$Proxy58.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:907) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) ERROR: Error fetching remote repo 'origin' [WARNINGS] Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-bts » trx,master,0,default,rpi4-deb9build-ansible #4123
by jenkins＠lists.osmocom.org 01 Sep '20

01 Sep '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> Changes: ------------------------------------------ Started by upstream project "master-osmo-bts" build number 4123 originally caused by: Started by upstream project "master-libosmo-abis" build number 2676 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-deb9build-ansible in workspace /home/osmocom-build/jenkins/workspace/master-osmo-bts/BTS_MODEL/trx/FIRMWARE_VERSION/master/WITH_MANUALS/0/a4/default/label/rpi4-deb9build-ansible FATAL: java.io.IOException: Unexpected termination of the channel java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2736) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3211) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:896) at java.io.ObjectInputStream.<init>(ObjectInputStream.java:358) at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:63) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:77) Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-deb9build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1788) at hudson.remoting.Request.call(Request.java:202) at hudson.remoting.Channel.call(Channel.java:997) at hudson.FilePath.act(FilePath.java:1069) at hudson.FilePath.act(FilePath.java:1058) at org.jenkinsci.plugins.gitclient.Git.getClient(Git.java:122) at hudson.plugins.git.GitSCM.createClient(GitSCM.java:835) at hudson.plugins.git.GitSCM.createClient(GitSCM.java:826) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1156) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1880) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) Caused: hudson.remoting.RequestAbortedException at hudson.remoting.Request.abort(Request.java:340) at hudson.remoting.Channel.terminate(Channel.java:1081) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:94) ERROR: Step ‘[Deprecated] Scan for compiler warnings’ failed: no workspace for master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-deb9build-ansible #4123

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications September 2020