June 2019 - jenkins-notifications

Build failed in Jenkins: master-osmo-sgsn » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #11504

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--enable-iu,WIT…> ------------------------------------------ [...truncated 834.77 KB...] ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^ ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct Member { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^ CC RUA_InitiatingMessage.o In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:14, from RUA_CriticalityDiagnostics-IE-List.c:7: ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:23: warning: ‘struct Member’ declared inside parameter list A_SEQUENCE_OF(struct Member { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^ ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct Member { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../../include/osmocom/rua/RUA_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^ CC RUA_SuccessfulOutcome.o CC RUA_UnsuccessfulOutcome.o CC RUA_Connect.o CC RUA_DirectTransfer.o CC RUA_Disconnect.o CC RUA_ConnectionlessTransfer.o CC RUA_ErrorIndication.o CC RUA_PrivateMessage.o CC RUA_IE.o AR libosmo-asn1-rua.a make[5]: Entering directory '/build/deps/osmo-iuh/src/rua' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/osmo-iuh/src/rua' make[4]: Leaving directory '/build/deps/osmo-iuh/src/rua' Making install in ranap make[4]: Entering directory '/build/deps/osmo-iuh/src/ranap' CC RANAP_Presence.lo CC RANAP_Criticality.lo CC RANAP_PrivateIE-ID.lo CC RANAP_ProcedureCode.lo CC RANAP_TriggeringMessage.lo CC RANAP_IE-Extensions.lo CC RANAP_ProtocolExtensionID.lo CC RANAP_ProtocolIE-ID.lo CC RANAP_AccuracyFulfilmentIndicator.lo CC RANAP_AllocationOrRetentionPriority.lo CC RANAP_Alt-RAB-Parameters.lo CC RANAP_Alt-RAB-Parameter-ExtendedGuaranteedBitrateInf.lo CC RANAP_Alt-RAB-Parameter-ExtendedGuaranteedBitrates.lo CC RANAP_Alt-RAB-Parameter-ExtendedGuaranteedBitrateList.lo CC RANAP_Alt-RAB-Parameter-GuaranteedBitrateInf.lo CC RANAP_Alt-RAB-Parameter-GuaranteedBitrateType.lo CC RANAP_Alt-RAB-Parameter-GuaranteedBitrates.lo CC RANAP_Alt-RAB-Parameter-GuaranteedBitrateList.lo CC RANAP_Alt-RAB-Parameter-SupportedGuaranteedBitrateInf.lo CC RANAP_Alt-RAB-Parameter-SupportedGuaranteedBitrates.lo CC RANAP_Alt-RAB-Parameter-ExtendedMaxBitrateInf.lo CC RANAP_Alt-RAB-Parameter-ExtendedMaxBitrates.lo CC RANAP_Alt-RAB-Parameter-ExtendedMaxBitrateList.lo CC RANAP_Alt-RAB-Parameter-MaxBitrateInf.lo CC RANAP_Alt-RAB-Parameter-MaxBitrateType.lo CC RANAP_Alt-RAB-Parameter-MaxBitrates.lo CC RANAP_Alt-RAB-Parameter-MaxBitrateList.lo CC RANAP_Alt-RAB-Parameter-SupportedMaxBitrateInf.lo CC RANAP_Alt-RAB-Parameter-SupportedMaxBitrates.lo CC RANAP_AlternativeRABConfigurationRequest.lo CC RANAP_APN.lo CC RANAP_AreaIdentity.lo CC RANAP_Ass-RAB-Parameters.lo CC RANAP_Ass-RAB-Parameter-ExtendedGuaranteedBitrateList.lo CC RANAP_Ass-RAB-Parameter-ExtendedMaxBitrateList.lo CC RANAP_Ass-RAB-Parameter-GuaranteedBitrateList.lo In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_IE-Extensions.h:15, from ../../include/osmocom/ranap/RANAP_SAI.h:17, from ../../include/osmocom/ranap/RANAP_AreaIdentity.h:14, from RANAP_AreaIdentity.c:7: ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:23: warning: 'struct Member' declared inside parameter list A_SEQUENCE_OF(struct Member { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct Member { ^ ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct Member { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct Member { ^ CC RANAP_Ass-RAB-Parameter-MaxBitrateList.lo CC RANAP_AuthorisedPLMNs.lo CC RANAP_AuthorisedSNAs.lo CC RANAP_BindingID.lo CC RANAP_BroadcastAssistanceDataDecipheringKeys.lo CC RANAP_Cause.lo CC RANAP_CauseMisc.lo CC RANAP_CauseNAS.lo In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:14, from RANAP_AuthorisedPLMNs.c:7: ../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:27:23: warning: 'struct MemberC' declared inside parameter list A_SEQUENCE_OF(struct MemberC { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:27:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberC { ^ ../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:27:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct MemberC { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:27:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberC { ^ CC RANAP_CauseProtocol.lo CC RANAP_CauseRadioNetwork.lo CC RANAP_CauseRadioNetworkExtension.lo CC RANAP_CauseNon-Standard.lo CC RANAP_CauseTransmissionNetwork.lo CC RANAP_Cell-Access-Mode.lo CC RANAP_CellBased.lo CC RANAP_CellIdList.lo CC RANAP_Cell-Id.lo CC RANAP_Cell-Capacity-Class-Value.lo CC RANAP_CellLoadInformation.lo CC RANAP_CellLoadInformationGroup.lo CC RANAP_CellType.lo CC RANAP_ClientType.lo CC RANAP_CriticalityDiagnostics.lo CC RANAP_CriticalityDiagnostics-IE-List.lo In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:14, from ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics.h:17, from RANAP_CriticalityDiagnostics.c:7: ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:23: warning: 'struct MemberG' declared inside parameter list A_SEQUENCE_OF(struct MemberG { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberG { ^ ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct MemberG { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberG { ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:14, from RANAP_CriticalityDiagnostics-IE-List.c:7: ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:23: warning: 'struct MemberG' declared inside parameter list A_SEQUENCE_OF(struct MemberG { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberG { ^ ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct MemberG { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberG { ^ CC RANAP_MessageStructure.lo CC RANAP_CGI.lo CC RANAP_ChosenEncryptionAlgorithm.lo CC RANAP_ChosenIntegrityProtectionAlgorithm.lo CC RANAP_CI.lo CC RANAP_ClassmarkInformation2.lo CC RANAP_ClassmarkInformation3.lo In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_MessageStructure.h:14, from RANAP_MessageStructure.c:7: ../../include/osmocom/ranap/RANAP_MessageStructure.h:27:23: warning: 'struct MemberL' declared inside parameter list A_SEQUENCE_OF(struct MemberL { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_MessageStructure.h:27:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberL { ^ ../../include/osmocom/ranap/RANAP_MessageStructure.h:27:23: warning: its scope is only this definition or declaration, which is probably not what you want A_SEQUENCE_OF(struct MemberL { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro 'A_SET_OF' void (*free)(type *); \ ^ ../../include/osmocom/ranap/RANAP_MessageStructure.h:27:2: note: in expansion of macro 'A_SEQUENCE_OF' A_SEQUENCE_OF(struct MemberL { ^ CC RANAP_CN-DomainIndicator.lo CC RANAP_CN-ID.lo CC RANAP_Correlation-ID.lo CC RANAP_CSFB-Information.lo CC RANAP_CSG-Id.lo /bin/bash: line 1: 11281 Illegal instruction (core dumped) /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"osmo-iuh\" -DPACKAGE_TARNAME=\"osmo-iuh\" -DPACKAGE_VERSION=\"0.4.0.8-11b1\" -DPACKAGE_STRING=\"osmo-iuh\ 0.4.0.8-11b1\" -DPACKAGE_BUGREPORT=\"openbsc(a)lists.osmocom.org\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE=\"osmo-iuh\" -DVERSION=\"0.4.0.8-11b1\" -DSTDC_HEADERS=1 -I. -Wall -I../../include -I/build/deps/install/stow/libasn1c/include/ -I/build/deps/install/stow/libasn1c/include/asn1c -I/build/deps/install/stow/libosmocore/include/ -g -O2 -Wall -MT RANAP_CSG-Id.lo -MD -MP -MF .deps/RANAP_CSG-Id.Tpo -c -o RANAP_CSG-Id.lo RANAP_CSG-Id.c Makefile:2495: recipe for target 'RANAP_CSG-Id.lo' failed make[4]: *** [RANAP_CSG-Id.lo] Error 132 make[4]: *** Waiting for unfinished jobs.... make[4]: Leaving directory '/build/deps/osmo-iuh/src/ranap' Makefile:631: recipe for target 'install-recursive' failed make[3]: Leaving directory '/build/deps/osmo-iuh/src' make[3]: *** [install-recursive] Error 1 make[2]: *** [install] Error 2 Makefile:790: recipe for target 'install' failed make[2]: Leaving directory '/build/deps/osmo-iuh/src' Makefile:446: recipe for target 'install-recursive' failed make[1]: Leaving directory '/build/deps/osmo-iuh' make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 Makefile:745: recipe for target 'install' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 12 months

1
1
0 0

Build failed in Jenkins: master-osmo-sgsn » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #11502

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--disable-iu,WI…> ------------------------------------------ [...truncated 24.12 KB...] CC crc32gen.lo CC crc64gen.lo CC macaddr.lo CC stat_item.lo CC stats_statsd.lo CC stats.lo CC prim.lo CC conv_acc.lo CC conv_acc_generic.lo CC sercomm.lo CC prbs.lo CC isdnhdlc.lo CC tdef.lo CC sockaddr_str.lo CC use_count.lo CC conv_acc_sse.lo CC conv_acc_sse_avx.lo CC plugin.lo CC msgfile.lo CC serial.lo CCLD libosmocore.la make[4]: Entering directory '/build/deps/libosmocore/src' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '/build/deps/install/stow/libosmocore/lib' libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.1.0 /build/deps/install/stow/libosmocore/lib/libosmocore.so.12.1.0 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocore.so.12.1.0 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.1.0 libosmocore.so.12; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocore.so.12.1.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.1.0 libosmocore.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocore.lai /build/deps/install/stow/libosmocore/lib/libosmocore.la libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/build_bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src' make[3]: Leaving directory '/build/deps/libosmocore/src' make[2]: Leaving directory '/build/deps/libosmocore/src' Making install in src/vty make[2]: Entering directory '/build/deps/libosmocore/src/vty' CC command.lo CC vty.lo CC utils.lo CC telnet_interface.lo CC buffer.lo CC stats_vty.lo CC vector.lo CC logging_vty.lo utils.c: In function 'handle_counter': utils.c:317:3: warning: 'osmo_counter_get' is deprecated (declared at ../../include/osmocom/core/counter.h:35): Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^ CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '/build/deps/libosmocore/src/vty' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '/build/deps/install/stow/libosmocore/lib' libtool: install: warning: relinking `libosmovty.la' libtool: install: (cd /build/deps/libosmocore/src/vty; /bin/bash /build/deps/libosmocore/libtool --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 7:0:3 -no-undefined -o libosmovty.la -rpath /build/deps/install/stow/libosmocore/lib buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.3.0T /build/deps/install/stow/libosmocore/lib/libosmovty.so.4.3.0 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmovty.so.4.3.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.3.0 libosmovty.so.4; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmovty.so.4.3.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.3.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai /build/deps/install/stow/libosmocore/lib/libosmovty.la libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/build_bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmocore/src/vty' make[2]: Leaving directory '/build/deps/libosmocore/src/vty' Making install in src/codec make[2]: Entering directory '/build/deps/libosmocore/src/codec' CC gsm610.lo CC gsm620.lo CC ecu_fr.lo CC gsm690.lo CC gsm660.lo CCLD libosmocodec.la make[3]: Entering directory '/build/deps/libosmocore/src/codec' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '/build/deps/install/stow/libosmocore/lib' libtool: install: warning: relinking `libosmocodec.la' libtool: install: (cd /build/deps/libosmocore/src/codec; /bin/bash /build/deps/libosmocore/libtool --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath /build/deps/install/stow/libosmocore/lib gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T /build/deps/install/stow/libosmocore/lib/libosmocodec.so.0.1.1 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai /build/deps/install/stow/libosmocore/lib/libosmocodec.la libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/build_bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmocore/src/codec' make[2]: Leaving directory '/build/deps/libosmocore/src/codec' Making install in src/gsm make[2]: Entering directory '/build/deps/libosmocore/src/gsm' GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '/build/deps/libosmocore/src/gsm' CC rxlev_stat.lo CC a5.lo CC tlv_parser.lo CC rsl.lo CC gsm_utils.lo CC comp128v23.lo CC comp128.lo CC gsm48.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^ CC gsm48_arfcn_range_encode.lo CC gsm0808.lo CC gsm48_ie.lo CC sysinfo.lo gsm48_ie.c: In function 'gsm48_decode_called': gsm48_ie.c:411:2: warning: 'gsm48_decode_bcd_number' is deprecated (declared at gsm48_ie.c:54): Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^ gsm48_ie.c: In function 'gsm48_decode_callerid': gsm48_ie.c:466:2: warning: 'gsm48_decode_bcd_number' is deprecated (declared at gsm48_ie.c:54): Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^ CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC abis_nm.lo CC gsm0411_utils.lo CC gsm0502.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo CC milenage/aes-internal.lo CC milenage/aes-internal-enc.lo CC milenage/milenage.lo CC gan.lo CC ipa.lo CC gsm0341.lo CC apn.lo /bin/bash: line 2: 6370 Segmentation fault (core dumped) /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT ipa.lo -MD -MP -MF $depbase.Tpo -c -o ipa.lo ipa.c Makefile:589: recipe for target 'ipa.lo' failed make[3]: *** [ipa.lo] Error 139 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/deps/libosmocore/src/gsm' Makefile:694: recipe for target 'install' failed make[2]: Leaving directory '/build/deps/libosmocore/src/gsm' make[2]: *** [install] Error 2 Makefile:614: recipe for target 'install-recursive' failed make[1]: Leaving directory '/build/deps/libosmocore' make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 Makefile:913: recipe for target 'install' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 12 months

1
1
0 0

Build failed in Jenkins: Coverity-Upload (jenkins-job-builder) #515

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/515/display/redire…> ------------------------------------------ [...truncated 1.41 MB...] checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands make -C host/trxcon make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' echo 0.0.0 > .version-t && mv .version-t .version make all-am make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' CC l1ctl_link.o CC l1ctl.o CC trx_if.o CC logging.o CC trxcon.o CC sched_lchan_common.o CC sched_lchan_pdtch.o CC sched_lchan_desc.o CC sched_lchan_xcch.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC sched_lchan_rach.o CC sched_lchan_sch.o CC sched_mframe.o CC sched_clck.o CC sched_prim.o CC sched_trx.o CCLD trxcon make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/trxcon' cd host/gsmmap && autoreconf -i configure.ac:13: installing './compile' configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' Makefile.am:10: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Makefile.am:15: warning: source file '../layer23/src/common/sysinfo.c' is in a subdirectory, Makefile.am:15: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Makefile.am:15: warning: source file '../layer23/src/common/networks.c' is in a subdirectory, Makefile.am:15: but option 'subdir-objects' is disabled Makefile.am:15: warning: source file '../layer23/src/common/logging.c' is in a subdirectory, Makefile.am:15: but option 'subdir-objects' is disabled Makefile.am: installing './depcomp' cd host/gsmmap && ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands make -C host/gsmmap make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' echo 0.0.0.2375-924d > .version-t && mv .version-t .version make all-am make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' CC gsmmap.o gsmmap.c:22:2: warning: #warning todo bsic [-Wcpp] #warning todo bsic ^~~~~~~ CC geo.o CC locate.o CC log.o CC sysinfo.o CC networks.o CC logging.o CCLD gsmmap make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gsmmap' cd host/gprsdecode && autoreconf -i configure.ac:13: installing './compile' configure.ac:3: installing './install-sh' configure.ac:3: installing './missing' Makefile.am: installing './depcomp' cd host/gprsdecode && ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for ranlib... ranlib checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCODING... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating tests/Makefile config.status: executing tests/atconfig commands config.status: executing depfiles commands make -C host/gprsdecode make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' Making all in tests make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode/tests' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode/tests' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' CC gsmtap.o CC rlcmac.o CC gprs.o CC main.o CCLD gprsdecode make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/gprsdecode' cd host/virt_phy && autoreconf -i configure.ac:11: installing './compile' configure.ac:4: installing './install-sh' configure.ac:4: installing './missing' src/Makefile.am: installing './depcomp' cd host/virt_phy && ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands make -C host/virt_phy make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make all-recursive make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' Making all in include make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/include' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/include' Making all in src make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/src' CC virtphy.o CC l1ctl_sock.o CC gsmtapl1_if.o CC l1ctl_sap.o l1ctl_sap.c:597:12: warning: ‘get_osmo_cs_by_l1ctl’ defined but not used [-Wunused-function] static int get_osmo_cs_by_l1ctl(enum l1ctl_coding_scheme l1) ^~~~~~~~~~~~~~~~~~~~ CC virt_prim_pm.o CC virt_prim_fbsb.o CC virt_prim_rach.o CC virt_prim_data.o CC virt_prim_traffic.o CC virt_l1_sched_simple.o CC logging.o CC virt_l1_model.o CC shared/virtual_um.o CC shared/osmo_mcast_sock.o CCLD virtphy $AM_CPPFLAGS is [ -I../include -I../../layer23/include] make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy/src' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmocom-bb/src/host/virt_phy' + popd ~/osmo-ci/coverity/source-Osmocom Emitted 2459 C/C++ compilation units (100%) successfully 2459 C/C++ compilation units (100%) are ready for analysis The cov-build utility completed successfully. + cd /home/osmocom-build/osmo-ci/coverity/source-Osmocom + rm -f Osmocom.tgz + tar czf Osmocom.tgz cov-int + set +x curl \ --form token="$token" \ --form email=holger(a)freyther.de --form file=(a)Osmocom.tgz \ --form version=Version --form description=AutoUpload \ https://scan.coverity.com/builds?project=Osmocom ./jenkins.sh: line 39: curl: command not found Build step 'Execute shell' marked build as failure

5 years, 12 months

1
6
0 0

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #1153

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 109.75 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel timer.c:45: warning 158: overflow in implicit constant conversion usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier isr.c:73: warning 94: comparison is always false due to limited range of data type isr.c:100: warning 94: comparison is always false due to limited range of data type -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c ../common/fpga_load.c:139: warning 85: sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c in function clock_out_config_byte unreferenced function argument : 'bits' srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h ../common/fpga_load.c:181: warning 126: unreachable code board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom chmod +x burn-usrp2-eeprom chmod +x burn-usrp4-eeprom usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years

1
1
0 0

Build failed in Jenkins: Osmocom_OBS_nightly #133

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/133/display/red…> ------------------------------------------ [...truncated 3.11 KB...] A network:osmocom:nightly/libasn1c/libasn1c_0.9.31.3.5e00.dsc A network:osmocom:nightly/libasn1c/libasn1c_0.9.31.3.5e00.tar.xz At revision 710. A network:osmocom:nightly/libgtpnl A network:osmocom:nightly/libgtpnl/libgtpnl_1.2.0.1.bc71.dsc A network:osmocom:nightly/libgtpnl/libgtpnl_1.2.0.1.bc71.tar.gz At revision 679. A network:osmocom:nightly/libosmo-abis A network:osmocom:nightly/libosmo-abis/libosmo-abis_0.6.0.8.3e03.dsc A network:osmocom:nightly/libosmo-abis/libosmo-abis_0.6.0.8.3e03.tar.xz At revision 1227. A network:osmocom:nightly/libosmo-dsp A network:osmocom:nightly/libosmo-dsp/libosmodsp_0.4.0.dsc A network:osmocom:nightly/libosmo-dsp/libosmodsp_0.4.0.tar.xz At revision 221. A network:osmocom:nightly/libosmo-netif A network:osmocom:nightly/libosmo-netif/libosmo-netif_0.5.0.1.f0f1.dsc A network:osmocom:nightly/libosmo-netif/libosmo-netif_0.5.0.1.f0f1.tar.xz At revision 1229. A network:osmocom:nightly/libosmo-sccp A network:osmocom:nightly/libosmo-sccp/libosmo-sccp_1.0.0.22.abcb.dsc A network:osmocom:nightly/libosmo-sccp/libosmo-sccp_1.0.0.22.abcb.tar.xz At revision 1227. A network:osmocom:nightly/libosmocore A network:osmocom:nightly/libosmocore/libosmocore_1.1.0.71.18e0.dsc A network:osmocom:nightly/libosmocore/libosmocore_1.1.0.71.18e0.tar.xz At revision 1228. A network:osmocom:nightly/libsmpp34 A network:osmocom:nightly/libsmpp34/libsmpp34_1.13.0.5.6b36.dsc A network:osmocom:nightly/libsmpp34/libsmpp34_1.13.0.5.6b36.tar.xz At revision 1227. A network:osmocom:nightly/libusrp A network:osmocom:nightly/libusrp/libusrp_3.4.2.20190620.dsc A network:osmocom:nightly/libusrp/libusrp_3.4.2.20190620.tar.xz At revision 499. A network:osmocom:nightly/limesuite A network:osmocom:nightly/limesuite/limesuite_19.04.0-1.debian.tar.xz A network:osmocom:nightly/limesuite/limesuite_19.04.0-1.dsc A network:osmocom:nightly/limesuite/limesuite_19.04.0.orig.tar.gz At revision 639. A network:osmocom:nightly/openbsc A network:osmocom:nightly/openbsc/openbsc_1.2.0.20190620.dsc A network:osmocom:nightly/openbsc/openbsc_1.2.0.20190620.tar.xz At revision 1226. A network:osmocom:nightly/orcania A network:osmocom:nightly/orcania/orcania_1.2.9-5.debian.tar.xz A network:osmocom:nightly/orcania/orcania_1.2.9-5.dsc A network:osmocom:nightly/orcania/orcania_1.2.9-5_amd64.buildinfo A network:osmocom:nightly/orcania/orcania_1.2.9.orig.tar.gz At revision 1. A network:osmocom:nightly/osmo-bsc A network:osmocom:nightly/osmo-bsc/osmo-bsc_1.4.0.91.1626f.dsc A network:osmocom:nightly/osmo-bsc/osmo-bsc_1.4.0.91.1626f.tar.xz At revision 687. A network:osmocom:nightly/osmo-bts A network:osmocom:nightly/osmo-bts/osmo-bts_0.8.1.327.876e.dsc A network:osmocom:nightly/osmo-bts/osmo-bts_0.8.1.327.876e.tar.xz At revision 1212. A network:osmocom:nightly/osmo-fl2k A network:osmocom:nightly/osmo-fl2k/osmo-fl2k_0.1.1.12.df33.dsc A network:osmocom:nightly/osmo-fl2k/osmo-fl2k_0.1.1.12.df33.tar.xz At revision 465. A network:osmocom:nightly/osmo-ggsn A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.3.0.33.e589.dsc A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.3.0.33.e589.tar.xz At revision 713. A network:osmocom:nightly/osmo-gsm-manuals A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.1.1.dsc A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.1.1.tar.xz At revision 85. A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.1.1.1.b6c6.dsc A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.1.1.1.b6c6.tar.xz At revision 44. A network:osmocom:nightly/osmo-hlr A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.0.0.38.9ac4.dsc A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.0.0.38.9ac4.tar.xz At revision 881. A network:osmocom:nightly/osmo-iuh A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.4.0.8.11b1.dsc A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.4.0.8.11b1.tar.xz At revision 710. A network:osmocom:nightly/osmo-mgw A network:osmocom:nightly/osmo-mgw/osmo-mgw_1.5.0.62.ef94.dsc A network:osmocom:nightly/osmo-mgw/osmo-mgw_1.5.0.62.ef94.tar.xz At revision 688. A network:osmocom:nightly/osmo-msc A network:osmocom:nightly/osmo-msc/osmo-msc_1.3.1.171.718f32.dsc A network:osmocom:nightly/osmo-msc/osmo-msc_1.3.1.171.718f32.tar.xz At revision 688. A network:osmocom:nightly/osmo-pcap A network:osmocom:nightly/osmo-pcap/osmo-pcap_0.0.6.98.407f.dsc A network:osmocom:nightly/osmo-pcap/osmo-pcap_0.0.6.98.407f.tar.xz At revision 1226. A network:osmocom:nightly/osmo-pcu A network:osmocom:nightly/osmo-pcu/osmo-pcu_0.6.0.68.79c6c.dsc A network:osmocom:nightly/osmo-pcu/osmo-pcu_0.6.0.68.79c6c.tar.xz At revision 1211. A network:osmocom:nightly/osmo-python-tests A network:osmocom:nightly/osmo-python-tests/osmo-python-tests_0.0.9.20190620.dsc A network:osmocom:nightly/osmo-python-tests/osmo-python-tests_0.0.9.20190620.tar.xz At revision 437. A network:osmocom:nightly/osmo-remsim A network:osmocom:nightly/osmo-remsim/osmo-remsim_0.1.0.19.293c.dsc A network:osmocom:nightly/osmo-remsim/osmo-remsim_0.1.0.19.293c.tar.gz At revision 111. A network:osmocom:nightly/osmo-sgsn A network:osmocom:nightly/osmo-sgsn/osmo-sgsn_1.4.0.27.43c5.dsc A network:osmocom:nightly/osmo-sgsn/osmo-sgsn_1.4.0.27.43c5.tar.xz At revision 712. A network:osmocom:nightly/osmo-sip-connector A network:osmocom:nightly/osmo-sip-connector/osmo-sip-connector_1.2.0.8.a137.dsc A network:osmocom:nightly/osmo-sip-connector/osmo-sip-connector_1.2.0.8.a137.tar.xz At revision 1215. A network:osmocom:nightly/osmo-sysmon A network:osmocom:nightly/osmo-sysmon/osmo-sysmon_0.1.0.2.9784.dsc A network:osmocom:nightly/osmo-sysmon/osmo-sysmon_0.1.0.2.9784.tar.xz At revision 135. A network:osmocom:nightly/osmo-trx A network:osmocom:nightly/osmo-trx/osmo-trx_1.0.0.46.ac04.dsc A network:osmocom:nightly/osmo-trx/osmo-trx_1.0.0.46.ac04.tar.xz At revision 1224. A network:osmocom:nightly/osmo-trx-debian8-jessie A network:osmocom:nightly/osmo-trx-debian8-jessie/osmo-trx_1.0.0.47.2817.dsc A network:osmocom:nightly/osmo-trx-debian8-jessie/osmo-trx_1.0.0.47.2817.tar.xz At revision 388. A network:osmocom:nightly/osmocom-nightly A network:osmocom:nightly/osmocom-nightly/osmocom-nightly_0.0.0.20190620.dsc A network:osmocom:nightly/osmocom-nightly/osmocom-nightly_0.0.0.20190620.tar.xz At revision 2. A network:osmocom:nightly/rtl-sdr A network:osmocom:nightly/rtl-sdr/rtl-sdr_0.5.4.12.f68b.dsc A network:osmocom:nightly/rtl-sdr/rtl-sdr_0.5.4.12.f68b.tar.xz At revision 462. A network:osmocom:nightly/simtrace2 A network:osmocom:nightly/simtrace2/simtrace2_0.5.1.27.6349.dsc A network:osmocom:nightly/simtrace2/simtrace2_0.5.1.27.6349.tar.gz At revision 372. A network:osmocom:nightly/soapysdr A network:osmocom:nightly/soapysdr/soapysdr_0.5.4-ppa1.debian.tar.xz A network:osmocom:nightly/soapysdr/soapysdr_0.5.4-ppa1.dsc A network:osmocom:nightly/soapysdr/soapysdr_0.5.4.orig.tar.gz At revision 1. A network:osmocom:nightly/soapyuhd A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2-1.debian.tar.xz A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2-1.dsc A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2.orig.tar.gz At revision 2. A network:osmocom:nightly/ulfius A network:osmocom:nightly/ulfius/ulfius_2.5.2-4.1.debian.tar.xz A network:osmocom:nightly/ulfius/ulfius_2.5.2-4.1.dsc A network:osmocom:nightly/ulfius/ulfius_2.5.2-4_amd64.buildinfo A network:osmocom:nightly/ulfius/ulfius_2.5.2.orig.tar.gz At revision 2. A network:osmocom:nightly/yder A network:osmocom:nightly/yder/yder_1.4.4-4.1.debian.tar.xz A network:osmocom:nightly/yder/yder_1.4.4-4.1.dsc A network:osmocom:nightly/yder/yder_1.4.4-4_amd64.buildinfo A network:osmocom:nightly/yder/yder_1.4.4.orig.tar.gz At revision 2. + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + osmo_obs_prepare_conflict osmocom-nightly osmocom-latest + local pkgname=osmocom-nightly + local pkgname_conflict=osmocom-latest + local pkgver=0.0.0 + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + mkdir -p osmocom-nightly/debian/source + cd osmocom-nightly/debian + cat + cat + cat + chmod +x rules + echo 9 + echo '3.0 (native)' + touch copyright + cd .. + git init . Initialized empty Git repository in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + git add -A + git commit -m 'auto-commit: osmocom-nightly dummy package' [master (root-commit) 32f983b] auto-commit: osmocom-nightly dummy package 6 files changed, 22 insertions(+) create mode 100644 debian/changelog create mode 100644 debian/compat create mode 100644 debian/control create mode 100644 debian/copyright create mode 100755 debian/rules create mode 100644 debian/source/format + git tag -f 0.0.0 + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + checkout_limesuite + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + git clone https://github.com/myriadrf/LimeSuite limesuite Cloning into 'limesuite'... ++ get_last_tag limesuite ++ project=limesuite ++ '[' limesuite = limesuite ']' ++ ver_regexp='^v[0-9]*.[0-9]*.[0-9]*$' +++ grep '^v[0-9]*.[0-9]*.[0-9]*$' +++ git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> tag -l --sort=v:refname +++ tail -n 1 ++ VER=v19.04.0 ++ echo v19.04.0 + TAG=v19.04.0 + cd limesuite + git checkout v19.04.0 Note: checking out 'v19.04.0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b <new-branch-name> HEAD is now at abf8214... Release 19.04.0 + checkout osmo-gsm-manuals + local name=osmo-gsm-manuals + local branch= + local url=https://git.osmocom.org + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + '[' -n '' ']' + git clone https://git.osmocom.org/osmo-gsm-manuals Cloning into 'osmo-gsm-manuals'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + checkout libosmocore + local name=libosmocore + local branch= + local url=https://git.osmocom.org + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + '[' -n '' ']' + git clone https://git.osmocom.org/libosmocore Cloning into 'libosmocore'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + checkout libosmo-sccp + local name=libosmo-sccp + local branch= + local url=https://git.osmocom.org + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…> + '[' -n '' ']' + git clone https://git.osmocom.org/libosmo-sccp Cloning into 'libosmo-sccp'... error: garbage at end of loose object '58ddf800ce67765e36fca3e237e062f67bc17fcb' fatal: loose object 58ddf800ce67765e36fca3e237e062f67bc17fcb (stored in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_m…)> is corrupt Build step 'Execute shell' marked build as failure

6 years

1
1
0 0

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-sysmo #2987

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> ------------------------------------------ [...truncated 97.68 KB...] checking dependency style of arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... arm-poky-linux-gnueabi checking how to print strings... printf checking for a sed that does not truncate output... (cached) sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi... arm-poky-linux-gnueabi-ld --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi checking if the linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... arm-poky-linux-gnueabi-nm checking the name lister (arm-poky-linux-gnueabi-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-poky-linux-gnueabi format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for arm-poky-linux-gnueabi-ld --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi option to reload object files... -r checking for arm-poky-linux-gnueabi-objdump... arm-poky-linux-gnueabi-objdump checking how to recognize dependent libraries... pass_all checking for arm-poky-linux-gnueabi-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-poky-linux-gnueabi-ar... arm-poky-linux-gnueabi-ar checking for archiver @FILE support... @ checking for arm-poky-linux-gnueabi-strip... (cached) arm-poky-linux-gnueabi-strip checking for arm-poky-linux-gnueabi-ranlib... arm-poky-linux-gnueabi-ranlib checking command to parse arm-poky-linux-gnueabi-nm output from arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi object... ok checking for sysroot... /opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky/2.3.2/sysroots/armv5te-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky/2.3.2/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky/2.3.2/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no CFLAGS=" -O2 -pipe" CPPFLAGS="" configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-litecell15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-openbsc + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CC gsm_data_shared.o CC sysinfo.o CC logging.o CC abis.o CC oml.o CC bts.o CC rsl.o CC vty.o gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’: gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ CC paging.o bts.c: In function ‘lchan_init_lapdm’: bts.c:423:2: warning: implicit declaration of function ‘lapdm_channel_init2’ [-Wimplicit-function-declaration] lapdm_channel_init2(lc, LAPDM_MODE_BTS, t200_ms_dcch, t200_ms_acch, lchan->type); ^~~~~~~~~~~~~~~~~~~ CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o pcu_sock.c: In function ‘pcu_tx_info_ind’: pcu_sock.c:199:2: warning: #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ pcu_sock.c:201:2: warning: #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ CC bts_ctrl_lookup.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC scheduler.o AR libl1sched.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC osmo_mcast_sock.o CC virtual_um.o CCLD osmo-bts-virtual ../../src/common/libbts.a(bts.o): In function `lchan_init_lapdm': bts.c:(.text+0xd84): undefined reference to `lapdm_channel_init2' collect2: error: ld returned 1 exit status Makefile:420: recipe for target 'osmo-bts-virtual' failed make[3]: *** [osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Makefile:384: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Makefile:433: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Makefile:365: recipe for target 'all' failed make: *** [all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CCLD osmo-bts-virtual ../../src/common/libbts.a(bts.o): In function `lchan_init_lapdm': bts.c:(.text+0xd84): undefined reference to `lapdm_channel_init2' collect2: error: ld returned 1 exit status Makefile:420: recipe for target 'osmo-bts-virtual' failed make[3]: *** [osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Makefile:384: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Makefile:433: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Makefile:365: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

6 years

1
1
0 0

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #1146

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 109.26 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier timer.c:45: warning 158: overflow in implicit constant conversion -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' isr.c:73: warning 94: comparison is always false due to limited range of data type isr.c:100: warning 94: comparison is always false due to limited range of data type usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h ../common/fpga_load.c:181: warning 126: unreachable code test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization chmod +x burn-usrp4-eeprom chmod +x burn-usrp2-eeprom sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years

1
2
0 0

Build failed in Jenkins: Osmocom_OBS_latest #628

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/628/display/redi…> ------------------------------------------ [...truncated 17.64 KB...] + checkout openbsc + project=openbsc + gitbpargs= + echo + echo ====> Checking out openbsc ====> Checking out openbsc + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ openbsc = limesuite ] + [ -d openbsc ] + git clone https://git.osmocom.org/openbsc Cloning into 'openbsc'... + cd openbsc + git fetch + get_last_tag openbsc + project=openbsc + [ openbsc = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/openbsc> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$+ tail -n 1 + VER=1.2.0 + echo 1.2.0 + VER=1.2.0 + git checkout -f -B 1.2.0 refs/tags/1.2.0 Switched to a new branch '1.2.0' + checkout osmo-pcap + project=osmo-pcap + gitbpargs= + echo + echo ====> Checking out osmo-pcap ====> Checking out osmo-pcap + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-pcap = limesuite ] + [ -d osmo-pcap ] + git clone https://git.osmocom.org/osmo-pcap Cloning into 'osmo-pcap'... + cd osmo-pcap + git fetch + get_last_tag osmo-pcap + project=osmo-pcap + [ osmo-pcap = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-pcap> tag -l --sort=v:refname + tail -n 1 grep ^[0-9]*.[0-9]*.[0-9]*$ + VER=0.0.6 + echo 0.0.6 + VER=0.0.6 + git checkout -f -B 0.0.6 refs/tags/0.0.6 Switched to a new branch '0.0.6' + checkout osmo-trx + project=osmo-trx + gitbpargs= + echo + echo ====> Checking out osmo-trx ====> Checking out osmo-trx + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-trx = limesuite ] + [ -d osmo-trx ] + git clone https://git.osmocom.org/osmo-trx Cloning into 'osmo-trx'... + cd osmo-trx + git fetch + get_last_tag osmo-trx + project=osmo-trx + [ osmo-trx = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-trx> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$ + tail -n 1 + VER=1.0.0 + echo 1.0.0 + VER=1.0.0 + git checkout -f -B 1.0.0 refs/tags/1.0.0 Switched to a new branch '1.0.0' + checkout osmo-sip-connector + project=osmo-sip-connector + gitbpargs= + echo + echo ====> Checking out osmo-sip-connector ====> Checking out osmo-sip-connector + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-sip-connector = limesuite ] + [ -d osmo-sip-connector ] + git clone https://git.osmocom.org/osmo-sip-connector Cloning into 'osmo-sip-connector'... + cd osmo-sip-connector + git fetch + get_last_tag osmo-sip-connector + project=osmo-sip-connector + [ osmo-sip-connector = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-sip-conn…> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$ + tail -n 1 + VER=1.2.0 + echo 1.2.0 + VER=1.2.0 + git checkout -f -B 1.2.0 refs/tags/1.2.0 Switched to a new branch '1.2.0' + checkout osmo-bts + project=osmo-bts + gitbpargs= + echo + echo ====> Checking out osmo-bts ====> Checking out osmo-bts + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-bts = limesuite ] + [ -d osmo-bts ] + git clone https://git.osmocom.org/osmo-bts Cloning into 'osmo-bts'... + cd osmo-bts + git fetch + get_last_tag osmo-bts + project=osmo-bts + [ osmo-bts = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-bts> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$ + tail -n 1 + VER=1.0.1 + echo 1.0.1 + VER=1.0.1 + git checkout -f -B 1.0.1 refs/tags/1.0.1 Switched to a new branch '1.0.1' + checkout osmo-pcu + project=osmo-pcu + gitbpargs= + echo + echo ====> Checking out osmo-pcu ====> Checking out osmo-pcu + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-pcu = limesuite ] + [ -d osmo-pcu ] + git clone https://git.osmocom.org/osmo-pcu Cloning into 'osmo-pcu'... + cd osmo-pcu + git fetch + get_last_tag osmo-pcu + project=osmo-pcu + [ osmo-pcu = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + grep ^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-pcu> tag -l --sort=v:refname + tail -n 1 + VER=0.6.0 + echo 0.6.0 + VER=0.6.0 + git checkout -f -B 0.6.0 refs/tags/0.6.0 Switched to a new branch '0.6.0' + checkout osmo-hlr + project=osmo-hlr + gitbpargs= + echo + echo ====> Checking out osmo-hlr ====> Checking out osmo-hlr + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-hlr = limesuite ] + [ -d osmo-hlr ] + git clone https://git.osmocom.org/osmo-hlr Cloning into 'osmo-hlr'... + cd osmo-hlr + git fetch + get_last_tag osmo-hlr + project=osmo-hlr + [ osmo-hlr = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-hlr> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$ + tail -n 1 + VER=1.0.0 + echo 1.0.0 + VER=1.0.0 + git checkout -f -B 1.0.0 refs/tags/1.0.0 Switched to a new branch '1.0.0' + checkout osmo-mgw + project=osmo-mgw + gitbpargs= + echo + echo ====> Checking out osmo-mgw ====> Checking out osmo-mgw + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-mgw = limesuite ] + [ -d osmo-mgw ] + git clone https://git.osmocom.org/osmo-mgw Cloning into 'osmo-mgw'... + cd osmo-mgw + git fetch + get_last_tag osmo-mgw + project=osmo-mgw + [ osmo-mgw = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-mgw> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$ + tail -n 1 + VER=1.5.0 + echo 1.5.0 + VER=1.5.0 + git checkout -f -B 1.5.0 refs/tags/1.5.0 Switched to a new branch '1.5.0' + checkout osmo-msc + project=osmo-msc + gitbpargs= + echo + echo ====> Checking out osmo-msc ====> Checking out osmo-msc + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-msc = limesuite ] + [ -d osmo-msc ] + git clone https://git.osmocom.org/osmo-msc Cloning into 'osmo-msc'... + cd osmo-msc + git fetch + get_last_tag osmo-msc + project=osmo-msc + [ osmo-msc = limesuite ] + ver_regexp=^[0-9]*.[0-9]*.[0-9]*$ + git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-msc> tag -l --sort=v:refname + grep ^[0-9]*.[0-9]*.[0-9]*$ + tail -n 1 + VER=1.4.0 + echo 1.4.0 + VER=1.4.0 + git checkout -f -B 1.4.0 refs/tags/1.4.0 Switched to a new branch '1.4.0' + checkout osmo-bsc + project=osmo-bsc + gitbpargs= + echo + echo ====> Checking out osmo-bsc ====> Checking out osmo-bsc + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> + [ osmo-bsc = limesuite ] + [ -d osmo-bsc ] + git clone https://git.osmocom.org/osmo-bsc Cloning into 'osmo-bsc'... error: garbage at end of loose object 'b5511145af6213e2d23a3e9890fd42b8aaa0dc1b' fatal: loose object b5511145af6213e2d23a3e9890fd42b8aaa0dc1b (stored in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/osmo-bsc/.git…)> is corrupt Build step 'Execute shell' marked build as failure

6 years

1
1
0 0

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #1141

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 109.38 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier timer.c:45: warning 158: overflow in implicit constant conversion isr.c:73: warning 94: comparison is always false due to limited range of data type -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' isr.c:100: warning 94: comparison is always false due to limited range of data type usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h ../common/fpga_load.c:181: warning 126: unreachable code board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization chmod +x burn-usrp4-eeprom chmod +x burn-usrp2-eeprom sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years

1
3
0 0

Jenkins build is back to normal : master-osmo-pcu » master,1,osmocom-master-debian9,none,False #1626

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…>

6 years

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications June 2019