Changes:
[Oliver Smith] obs: build_binpkg: add --run-shell-on-error arg
------------------------------------------ [...truncated 63.70 KB...] ---> 138b5b660b61 Step 6/39 : RUN usermod -a -G osmo-gsm-tester jenkins ---> Running in d4d171e42ac7 Removing intermediate container d4d171e42ac7 ---> 20e3a21957aa Step 7/39 : RUN apt-get update && apt-get install -y --no-install-recommends dbus tcpdump sqlite3 python3 python3-setuptools python3-yaml python3-mako python3-gi python3-numpy python3-wheel python3-watchdog ofono patchelf sudo libcap2-bin python3-pip udhcpc iperf3 locales ---> Running in 1004820caeca Hit:1 http://deb.debian.org/debian buster InRelease Hit:2 http://deb.debian.org/debian-security buster/updates InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... libcap2-bin is already the newest version (1:2.25-2). libcap2-bin set to manually installed. ofono is already the newest version (1.21-1). patchelf is already the newest version (0.9+52.20180509-1). python3-gi is already the newest version (3.30.4-1). python3-pip is already the newest version (18.1-5). python3-setuptools is already the newest version (40.8.0-1). python3 is already the newest version (3.7.3-1). python3-yaml is already the newest version (3.13-2). sudo is already the newest version (1.8.27-1+deb10u3). tcpdump is already the newest version (4.9.3-1~deb10u2). dbus is already the newest version (1.12.24-0+deb10u1). locales is already the newest version (2.28-10+deb10u2). python3-mako is already the newest version (1.0.7+ds1-1+deb10u1). sqlite3 is already the newest version (3.27.2-3+deb10u2). The following additional packages will be installed: busybox libiperf0 libjs-sphinxdoc libjs-underscore python3-argh python3-pathtools Suggested packages: gfortran python-numpy-doc python3-pytest python3-numpy-dbg Recommended packages: javascript-common python3-argcomplete python3-keyring python3-keyrings.alt python3-xdg The following NEW packages will be installed: busybox iperf3 libiperf0 libjs-sphinxdoc libjs-underscore python3-argh python3-numpy python3-pathtools python3-watchdog python3-wheel udhcpc 0 upgraded, 11 newly installed, 0 to remove and 20 not upgraded. Need to get 3,043 kB of archives. After this operation, 14.6 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main amd64 busybox amd64 1:1.30.1-4 [432 kB] Get:2 http://deb.debian.org/debian buster/main amd64 libiperf0 amd64 3.6-2 [77.3 kB] Get:3 http://deb.debian.org/debian buster/main amd64 iperf3 amd64 3.6-2 [25.9 kB] Get:4 http://deb.debian.org/debian buster/main amd64 libjs-underscore all 1.9.1~dfsg-1+deb10u1 [100.0 kB] Get:5 http://deb.debian.org/debian buster/main amd64 libjs-sphinxdoc all 1.8.4-1 [95.9 kB] Get:6 http://deb.debian.org/debian buster/main amd64 python3-argh all 0.26.2-1 [21.9 kB] Get:7 http://deb.debian.org/debian buster/main amd64 python3-numpy amd64 1:1.16.2-1 [2,119 kB] Get:8 http://deb.debian.org/debian buster/main amd64 python3-pathtools all 0.1.2-2 [11.1 kB] Get:9 http://deb.debian.org/debian buster/main amd64 python3-watchdog all 0.9.0-1 [116 kB] Get:10 http://deb.debian.org/debian buster/main amd64 python3-wheel all 0.32.3-2 [19.4 kB] Get:11 http://deb.debian.org/debian buster/main amd64 udhcpc amd64 1:1.30.1-4 [24.3 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 3,043 kB in 10s (292 kB/s) Selecting previously unselected package busybox. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 102516 files and directories currently installed.) Preparing to unpack .../00-busybox_1%3a1.30.1-4_amd64.deb ... Unpacking busybox (1:1.30.1-4) ... Selecting previously unselected package libiperf0:amd64. Preparing to unpack .../01-libiperf0_3.6-2_amd64.deb ... Unpacking libiperf0:amd64 (3.6-2) ... Selecting previously unselected package iperf3. Preparing to unpack .../02-iperf3_3.6-2_amd64.deb ... Unpacking iperf3 (3.6-2) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../03-libjs-underscore_1.9.1~dfsg-1+deb10u1_all.deb ... Unpacking libjs-underscore (1.9.1~dfsg-1+deb10u1) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../04-libjs-sphinxdoc_1.8.4-1_all.deb ... Unpacking libjs-sphinxdoc (1.8.4-1) ... Selecting previously unselected package python3-argh. Preparing to unpack .../05-python3-argh_0.26.2-1_all.deb ... Unpacking python3-argh (0.26.2-1) ... Selecting previously unselected package python3-numpy. Preparing to unpack .../06-python3-numpy_1%3a1.16.2-1_amd64.deb ... Unpacking python3-numpy (1:1.16.2-1) ... Selecting previously unselected package python3-pathtools. Preparing to unpack .../07-python3-pathtools_0.1.2-2_all.deb ... Unpacking python3-pathtools (0.1.2-2) ... Selecting previously unselected package python3-watchdog. Preparing to unpack .../08-python3-watchdog_0.9.0-1_all.deb ... Unpacking python3-watchdog (0.9.0-1) ... Selecting previously unselected package python3-wheel. Preparing to unpack .../09-python3-wheel_0.32.3-2_all.deb ... Unpacking python3-wheel (0.32.3-2) ... Selecting previously unselected package udhcpc. Preparing to unpack .../10-udhcpc_1%3a1.30.1-4_amd64.deb ... Unpacking udhcpc (1:1.30.1-4) ... Setting up python3-argh (0.26.2-1) ... Setting up python3-wheel (0.32.3-2) ... Setting up busybox (1:1.30.1-4) ... Setting up python3-pathtools (0.1.2-2) ... Setting up libiperf0:amd64 (3.6-2) ... Setting up python3-numpy (1:1.16.2-1) ... Setting up udhcpc (1:1.30.1-4) ... Setting up libjs-underscore (1.9.1~dfsg-1+deb10u1) ... Setting up iperf3 (3.6-2) ... Setting up libjs-sphinxdoc (1.8.4-1) ... Setting up python3-watchdog (0.9.0-1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+deb10u2) ... Removing intermediate container 1004820caeca ---> 51135367ded1 Step 8/39 : RUN pip3 install "git+https://github.com/podshumok/python-smpplib.git@master#egg=smpplib" pydbus pyusb pysispm pymongo ---> Running in e2bfdbde4164 Requirement already satisfied: smpplib from git+https://github.com/podshumok/python-smpplib.git@master#egg=smpplib in /usr/local/lib/python3.7/dist-packages (2.1.0) Requirement already satisfied: pydbus in /usr/local/lib/python3.7/dist-packages (0.6.0) Requirement already satisfied: pyusb in /usr/lib/python3/dist-packages (1.0.2) Requirement already satisfied: pysispm in /usr/local/lib/python3.7/dist-packages (0.6) Collecting pymongo Downloading https://files.pythonhosted.org/packages/d8/92/0154a928816f70649d5bd02d6f122b... (485kB) Requirement already satisfied: six in /usr/lib/python3/dist-packages (from smpplib) (1.12.0) Collecting dnspython<3.0.0,>=1.16.0 (from pymongo) Downloading https://files.pythonhosted.org/packages/9b/ed/28fb14146c7033ba0e89decd92a4fa... (269kB) Installing collected packages: dnspython, pymongo Successfully installed dnspython-2.2.1 pymongo-4.3.2 Removing intermediate container e2bfdbde4164 ---> 2f15b3fd188d Step 9/39 : RUN apt-get update && apt-get install -y openssh-server ---> Running in 8f97a51fd794 Hit:1 http://deb.debian.org/debian buster InRelease Hit:2 http://deb.debian.org/debian-security buster/updates InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libnss-systemd libpam-systemd libxmuu1 ncurses-term openssh-sftp-server systemd-sysv xauth Suggested packages: molly-guard monkeysphere rssh ssh-askpass ufw The following NEW packages will be installed: libnss-systemd libpam-systemd libxmuu1 ncurses-term openssh-server openssh-sftp-server systemd-sysv xauth 0 upgraded, 8 newly installed, 0 to remove and 20 not upgraded. Need to get 1,466 kB of archives. After this operation, 6,947 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main amd64 systemd-sysv amd64 241-7~deb10u8 [100 kB] Get:2 http://deb.debian.org/debian buster/main amd64 libnss-systemd amd64 241-7~deb10u8 [205 kB] Get:3 http://deb.debian.org/debian buster/main amd64 libpam-systemd amd64 241-7~deb10u8 [209 kB] Get:4 http://deb.debian.org/debian-security buster/updates/main amd64 ncurses-term all 6.1+20181013-2+deb10u3 [490 kB] Get:5 http://deb.debian.org/debian buster/main amd64 libxmuu1 amd64 2:1.1.2-2+b3 [23.9 kB] Get:6 http://deb.debian.org/debian buster/main amd64 openssh-sftp-server amd64 1:7.9p1-10+deb10u2 [44.6 kB] Get:7 http://deb.debian.org/debian buster/main amd64 openssh-server amd64 1:7.9p1-10+deb10u2 [352 kB] Get:8 http://deb.debian.org/debian buster/main amd64 xauth amd64 1:1.0.10-1 [40.3 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 1,466 kB in 10s (142 kB/s) Selecting previously unselected package systemd-sysv. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 103172 files and directories currently installed.) Preparing to unpack .../0-systemd-sysv_241-7~deb10u8_amd64.deb ... Unpacking systemd-sysv (241-7~deb10u8) ... Selecting previously unselected package libnss-systemd:amd64. Preparing to unpack .../1-libnss-systemd_241-7~deb10u8_amd64.deb ... Unpacking libnss-systemd:amd64 (241-7~deb10u8) ... Selecting previously unselected package libpam-systemd:amd64. Preparing to unpack .../2-libpam-systemd_241-7~deb10u8_amd64.deb ... Unpacking libpam-systemd:amd64 (241-7~deb10u8) ... Selecting previously unselected package ncurses-term. Preparing to unpack .../3-ncurses-term_6.1+20181013-2+deb10u3_all.deb ... Unpacking ncurses-term (6.1+20181013-2+deb10u3) ... Selecting previously unselected package libxmuu1:amd64. Preparing to unpack .../4-libxmuu1_2%3a1.1.2-2+b3_amd64.deb ... Unpacking libxmuu1:amd64 (2:1.1.2-2+b3) ... Selecting previously unselected package openssh-sftp-server. Preparing to unpack .../5-openssh-sftp-server_1%3a7.9p1-10+deb10u2_amd64.deb ... Unpacking openssh-sftp-server (1:7.9p1-10+deb10u2) ... Selecting previously unselected package openssh-server. Preparing to unpack .../6-openssh-server_1%3a7.9p1-10+deb10u2_amd64.deb ... Unpacking openssh-server (1:7.9p1-10+deb10u2) ... Selecting previously unselected package xauth. Preparing to unpack .../7-xauth_1%3a1.0.10-1_amd64.deb ... Unpacking xauth (1:1.0.10-1) ... Setting up openssh-sftp-server (1:7.9p1-10+deb10u2) ... Setting up systemd-sysv (241-7~deb10u8) ... Setting up openssh-server (1:7.9p1-10+deb10u2) ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline
Creating config file /etc/ssh/sshd_config with new version Creating SSH2 RSA key; this may take some time ... 2048 SHA256:LDeAGFsf6vfFpUWGaQJzoPKQ0492v06tC+k7wrg6jP8 root@8f97a51fd794 (RSA) Creating SSH2 ECDSA key; this may take some time ... 256 SHA256:FDGnzQfD078GlY5JIlGn4utHuUUtOECpo2fZeGiVwpM root@8f97a51fd794 (ECDSA) Creating SSH2 ED25519 key; this may take some time ... 256 SHA256:GReUvLa+CezfpAXJ7Z5tsJiD+SuUot1ihxlTXmKGJ4s root@8f97a51fd794 (ED25519) Created symlink /etc/systemd/system/sshd.service → /lib/systemd/system/ssh.service. Created symlink /etc/systemd/system/multi-user.target.wants/ssh.service → /lib/systemd/system/ssh.service. invoke-rc.d: could not determine current runlevel invoke-rc.d: policy-rc.d denied execution of start. Setting up libnss-systemd:amd64 (241-7~deb10u8) ... First installation detected... Checking NSS setup... Setting up libpam-systemd:amd64 (241-7~deb10u8) ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline Setting up libxmuu1:amd64 (2:1.1.2-2+b3) ... Setting up ncurses-term (6.1+20181013-2+deb10u3) ... Setting up xauth (1:1.0.10-1) ... Processing triggers for systemd (241-7~deb10u8) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+deb10u2) ... Removing intermediate container 8f97a51fd794 ---> b80fedf4c053 Step 10/39 : RUN mkdir /var/run/sshd ---> Running in caf96a46728b Removing intermediate container caf96a46728b ---> 0336ef6be7d6 Step 11/39 : COPY ssh /root/.ssh ---> c2bfa127698a Step 12/39 : COPY --chown=jenkins:jenkins ssh /home/jenkins/.ssh ---> 8e025d45c530 Step 13/39 : RUN chmod -R 0700 /home/jenkins/.ssh /root/.ssh ---> Running in 69853e9b1363 Removing intermediate container 69853e9b1363 ---> 8252375a71a6 Step 14/39 : RUN mkdir -p /osmo-gsm-tester-srsue /osmo-gsm-tester-srsenb /osmo-gsm-tester-srsepc /osmo-gsm-tester-trx /osmo-gsm-tester-grbroker /osmo-gsm-tester-open5gs ---> Running in 1f72effe874d Removing intermediate container 1f72effe874d ---> 7d6ce08c0319 Step 15/39 : RUN chown -R jenkins:jenkins /osmo-gsm-tester-* ---> Running in e2c289ceadf0 Removing intermediate container e2c289ceadf0 ---> 63e58f3a126e Step 16/39 : RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && dpkg-reconfigure --frontend=noninteractive locales && update-locale LANG=en_US.UTF-8 ---> Running in 0156fd1da173 [91mGenerating locales (this might take a while)... [0m[91m en_US.UTF-8[0m[91m...[0m[91m done [0m[91mGeneration complete. [0mRemoving intermediate container 0156fd1da173 ---> e890c2d572f1 Step 17/39 : ENV LANG en_US.UTF-8 ---> Running in 1c45cffc77d3 Removing intermediate container 1c45cffc77d3 ---> 8d1884e82d7a Step 18/39 : ADD https://github.com/NixOS/patchelf/archive/0.11.tar.gz /tmp/patchelf-0.11.tar.gz
failed to get destination image "sha256:8d1884e82d7a8dd84d335ae8bef31c2f4d815375145383f106ab1a045d3d8b8e": No such image: sha256:8d1884e82d7a8dd84d335ae8bef31c2f4d815375145383f106ab1a045d3d8b8e make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=osmo-gsm-tester-prod/ws/_docker_playground/osmo-gsm-tester' + exit 1 Build step 'Execute shell' marked build as failure