See
<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=osmo-gsm-tester-prod/1319/display/redirect?page=changes>
Changes:
[Oliver Smith] obs: build_binpkg: add --run-shell-on-error arg
------------------------------------------
[...truncated 63.70 KB...]
---> 138b5b660b61
Step 6/39 : RUN usermod -a -G osmo-gsm-tester jenkins
---> Running in d4d171e42ac7
Removing intermediate container d4d171e42ac7
---> 20e3a21957aa
Step 7/39 : RUN apt-get update && apt-get install -y --no-install-recommends
dbus tcpdump sqlite3 python3 python3-setuptools python3-yaml python3-mako
python3-gi python3-numpy python3-wheel python3-watchdog ofono patchelf sudo
libcap2-bin python3-pip udhcpc iperf3 locales
---> Running in 1004820caeca
Hit:1
http://deb.debian.org/debian buster InRelease
Hit:2
http://deb.debian.org/debian-security buster/updates InRelease
Hit:3
http://deb.debian.org/debian buster-updates InRelease
Hit:4
https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
libcap2-bin is already the newest version (1:2.25-2).
libcap2-bin set to manually installed.
ofono is already the newest version (1.21-1).
patchelf is already the newest version (0.9+52.20180509-1).
python3-gi is already the newest version (3.30.4-1).
python3-pip is already the newest version (18.1-5).
python3-setuptools is already the newest version (40.8.0-1).
python3 is already the newest version (3.7.3-1).
python3-yaml is already the newest version (3.13-2).
sudo is already the newest version (1.8.27-1+deb10u3).
tcpdump is already the newest version (4.9.3-1~deb10u2).
dbus is already the newest version (1.12.24-0+deb10u1).
locales is already the newest version (2.28-10+deb10u2).
python3-mako is already the newest version (1.0.7+ds1-1+deb10u1).
sqlite3 is already the newest version (3.27.2-3+deb10u2).
The following additional packages will be installed:
busybox libiperf0 libjs-sphinxdoc libjs-underscore python3-argh
python3-pathtools
Suggested packages:
gfortran python-numpy-doc python3-pytest python3-numpy-dbg
Recommended packages:
javascript-common python3-argcomplete python3-keyring python3-keyrings.alt
python3-xdg
The following NEW packages will be installed:
busybox iperf3 libiperf0 libjs-sphinxdoc libjs-underscore python3-argh
python3-numpy python3-pathtools python3-watchdog python3-wheel udhcpc
0 upgraded, 11 newly installed, 0 to remove and 20 not upgraded.
Need to get 3,043 kB of archives.
After this operation, 14.6 MB of additional disk space will be used.
Get:1
http://deb.debian.org/debian buster/main amd64 busybox amd64 1:1.30.1-4 [432 kB]
Get:2
http://deb.debian.org/debian buster/main amd64 libiperf0 amd64 3.6-2 [77.3 kB]
Get:3
http://deb.debian.org/debian buster/main amd64 iperf3 amd64 3.6-2 [25.9 kB]
Get:4
http://deb.debian.org/debian buster/main amd64 libjs-underscore all
1.9.1~dfsg-1+deb10u1 [100.0 kB]
Get:5
http://deb.debian.org/debian buster/main amd64 libjs-sphinxdoc all 1.8.4-1 [95.9
kB]
Get:6
http://deb.debian.org/debian buster/main amd64 python3-argh all 0.26.2-1 [21.9 kB]
Get:7
http://deb.debian.org/debian buster/main amd64 python3-numpy amd64 1:1.16.2-1 [2,119
kB]
Get:8
http://deb.debian.org/debian buster/main amd64 python3-pathtools all 0.1.2-2 [11.1
kB]
Get:9
http://deb.debian.org/debian buster/main amd64 python3-watchdog all 0.9.0-1 [116
kB]
Get:10
http://deb.debian.org/debian buster/main amd64 python3-wheel all 0.32.3-2 [19.4
kB]
Get:11
http://deb.debian.org/debian buster/main amd64 udhcpc amd64 1:1.30.1-4 [24.3 kB]
[91mdebconf: delaying package configuration, since apt-utils is not installed
[0mFetched 3,043 kB in 10s (292 kB/s)
Selecting previously unselected package busybox.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database
... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading
database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ...
50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading
database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ...
85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading
database ... 102516 files and directories currently installed.)
Preparing to unpack .../00-busybox_1%3a1.30.1-4_amd64.deb ...
Unpacking busybox (1:1.30.1-4) ...
Selecting previously unselected package libiperf0:amd64.
Preparing to unpack .../01-libiperf0_3.6-2_amd64.deb ...
Unpacking libiperf0:amd64 (3.6-2) ...
Selecting previously unselected package iperf3.
Preparing to unpack .../02-iperf3_3.6-2_amd64.deb ...
Unpacking iperf3 (3.6-2) ...
Selecting previously unselected package libjs-underscore.
Preparing to unpack .../03-libjs-underscore_1.9.1~dfsg-1+deb10u1_all.deb ...
Unpacking libjs-underscore (1.9.1~dfsg-1+deb10u1) ...
Selecting previously unselected package libjs-sphinxdoc.
Preparing to unpack .../04-libjs-sphinxdoc_1.8.4-1_all.deb ...
Unpacking libjs-sphinxdoc (1.8.4-1) ...
Selecting previously unselected package python3-argh.
Preparing to unpack .../05-python3-argh_0.26.2-1_all.deb ...
Unpacking python3-argh (0.26.2-1) ...
Selecting previously unselected package python3-numpy.
Preparing to unpack .../06-python3-numpy_1%3a1.16.2-1_amd64.deb ...
Unpacking python3-numpy (1:1.16.2-1) ...
Selecting previously unselected package python3-pathtools.
Preparing to unpack .../07-python3-pathtools_0.1.2-2_all.deb ...
Unpacking python3-pathtools (0.1.2-2) ...
Selecting previously unselected package python3-watchdog.
Preparing to unpack .../08-python3-watchdog_0.9.0-1_all.deb ...
Unpacking python3-watchdog (0.9.0-1) ...
Selecting previously unselected package python3-wheel.
Preparing to unpack .../09-python3-wheel_0.32.3-2_all.deb ...
Unpacking python3-wheel (0.32.3-2) ...
Selecting previously unselected package udhcpc.
Preparing to unpack .../10-udhcpc_1%3a1.30.1-4_amd64.deb ...
Unpacking udhcpc (1:1.30.1-4) ...
Setting up python3-argh (0.26.2-1) ...
Setting up python3-wheel (0.32.3-2) ...
Setting up busybox (1:1.30.1-4) ...
Setting up python3-pathtools (0.1.2-2) ...
Setting up libiperf0:amd64 (3.6-2) ...
Setting up python3-numpy (1:1.16.2-1) ...
Setting up udhcpc (1:1.30.1-4) ...
Setting up libjs-underscore (1.9.1~dfsg-1+deb10u1) ...
Setting up iperf3 (3.6-2) ...
Setting up libjs-sphinxdoc (1.8.4-1) ...
Setting up python3-watchdog (0.9.0-1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for libc-bin (2.28-10+deb10u2) ...
Removing intermediate container 1004820caeca
---> 51135367ded1
Step 8/39 : RUN pip3 install
"git+https://github.com/podshumok/python-smpplib.git@master#egg=smpplib"
pydbus pyusb pysispm pymongo
---> Running in e2bfdbde4164
Requirement already satisfied: smpplib from
git+https://github.com/podshumok/python-smpplib.git@master#egg=smpplib in
/usr/local/lib/python3.7/dist-packages (2.1.0)
Requirement already satisfied: pydbus in /usr/local/lib/python3.7/dist-packages (0.6.0)
Requirement already satisfied: pyusb in /usr/lib/python3/dist-packages (1.0.2)
Requirement already satisfied: pysispm in /usr/local/lib/python3.7/dist-packages (0.6)
Collecting pymongo
Downloading
https://files.pythonhosted.org/packages/d8/92/0154a928816f70649d5bd02d6f122…
(485kB)
Requirement already satisfied: six in /usr/lib/python3/dist-packages (from smpplib)
(1.12.0)
Collecting dnspython<3.0.0,>=1.16.0 (from pymongo)
Downloading
https://files.pythonhosted.org/packages/9b/ed/28fb14146c7033ba0e89decd92a4f…
(269kB)
Installing collected packages: dnspython, pymongo
Successfully installed dnspython-2.2.1 pymongo-4.3.2
Removing intermediate container e2bfdbde4164
---> 2f15b3fd188d
Step 9/39 : RUN apt-get update && apt-get install -y openssh-server
---> Running in 8f97a51fd794
Hit:1
http://deb.debian.org/debian buster InRelease
Hit:2
http://deb.debian.org/debian-security buster/updates InRelease
Hit:3
http://deb.debian.org/debian buster-updates InRelease
Hit:4
https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
libnss-systemd libpam-systemd libxmuu1 ncurses-term openssh-sftp-server
systemd-sysv xauth
Suggested packages:
molly-guard monkeysphere rssh ssh-askpass ufw
The following NEW packages will be installed:
libnss-systemd libpam-systemd libxmuu1 ncurses-term openssh-server
openssh-sftp-server systemd-sysv xauth
0 upgraded, 8 newly installed, 0 to remove and 20 not upgraded.
Need to get 1,466 kB of archives.
After this operation, 6,947 kB of additional disk space will be used.
Get:1
http://deb.debian.org/debian buster/main amd64 systemd-sysv amd64 241-7~deb10u8 [100
kB]
Get:2
http://deb.debian.org/debian buster/main amd64 libnss-systemd amd64 241-7~deb10u8
[205 kB]
Get:3
http://deb.debian.org/debian buster/main amd64 libpam-systemd amd64 241-7~deb10u8
[209 kB]
Get:4
http://deb.debian.org/debian-security buster/updates/main amd64 ncurses-term all
6.1+20181013-2+deb10u3 [490 kB]
Get:5
http://deb.debian.org/debian buster/main amd64 libxmuu1 amd64 2:1.1.2-2+b3 [23.9
kB]
Get:6
http://deb.debian.org/debian buster/main amd64 openssh-sftp-server amd64
1:7.9p1-10+deb10u2 [44.6 kB]
Get:7
http://deb.debian.org/debian buster/main amd64 openssh-server amd64
1:7.9p1-10+deb10u2 [352 kB]
Get:8
http://deb.debian.org/debian buster/main amd64 xauth amd64 1:1.0.10-1 [40.3 kB]
[91mdebconf: delaying package configuration, since apt-utils is not installed
[0mFetched 1,466 kB in 10s (142 kB/s)
Selecting previously unselected package systemd-sysv.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database
... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading
database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ...
50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading
database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ...
85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading
database ... 103172 files and directories currently installed.)
Preparing to unpack .../0-systemd-sysv_241-7~deb10u8_amd64.deb ...
Unpacking systemd-sysv (241-7~deb10u8) ...
Selecting previously unselected package libnss-systemd:amd64.
Preparing to unpack .../1-libnss-systemd_241-7~deb10u8_amd64.deb ...
Unpacking libnss-systemd:amd64 (241-7~deb10u8) ...
Selecting previously unselected package libpam-systemd:amd64.
Preparing to unpack .../2-libpam-systemd_241-7~deb10u8_amd64.deb ...
Unpacking libpam-systemd:amd64 (241-7~deb10u8) ...
Selecting previously unselected package ncurses-term.
Preparing to unpack .../3-ncurses-term_6.1+20181013-2+deb10u3_all.deb ...
Unpacking ncurses-term (6.1+20181013-2+deb10u3) ...
Selecting previously unselected package libxmuu1:amd64.
Preparing to unpack .../4-libxmuu1_2%3a1.1.2-2+b3_amd64.deb ...
Unpacking libxmuu1:amd64 (2:1.1.2-2+b3) ...
Selecting previously unselected package openssh-sftp-server.
Preparing to unpack .../5-openssh-sftp-server_1%3a7.9p1-10+deb10u2_amd64.deb ...
Unpacking openssh-sftp-server (1:7.9p1-10+deb10u2) ...
Selecting previously unselected package openssh-server.
Preparing to unpack .../6-openssh-server_1%3a7.9p1-10+deb10u2_amd64.deb ...
Unpacking openssh-server (1:7.9p1-10+deb10u2) ...
Selecting previously unselected package xauth.
Preparing to unpack .../7-xauth_1%3a1.0.10-1_amd64.deb ...
Unpacking xauth (1:1.0.10-1) ...
Setting up openssh-sftp-server (1:7.9p1-10+deb10u2) ...
Setting up systemd-sysv (241-7~deb10u8) ...
Setting up openssh-server (1:7.9p1-10+deb10u2) ...
debconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
Creating config file /etc/ssh/sshd_config with new version
Creating SSH2 RSA key; this may take some time ...
2048 SHA256:LDeAGFsf6vfFpUWGaQJzoPKQ0492v06tC+k7wrg6jP8 root@8f97a51fd794 (RSA)
Creating SSH2 ECDSA key; this may take some time ...
256 SHA256:FDGnzQfD078GlY5JIlGn4utHuUUtOECpo2fZeGiVwpM root@8f97a51fd794 (ECDSA)
Creating SSH2 ED25519 key; this may take some time ...
256 SHA256:GReUvLa+CezfpAXJ7Z5tsJiD+SuUot1ihxlTXmKGJ4s root@8f97a51fd794 (ED25519)
Created symlink /etc/systemd/system/sshd.service → /lib/systemd/system/ssh.service.
Created symlink /etc/systemd/system/multi-user.target.wants/ssh.service →
/lib/systemd/system/ssh.service.
invoke-rc.d: could not determine current runlevel
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libnss-systemd:amd64 (241-7~deb10u8) ...
First installation detected...
Checking NSS setup...
Setting up libpam-systemd:amd64 (241-7~deb10u8) ...
debconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
Setting up libxmuu1:amd64 (2:1.1.2-2+b3) ...
Setting up ncurses-term (6.1+20181013-2+deb10u3) ...
Setting up xauth (1:1.0.10-1) ...
Processing triggers for systemd (241-7~deb10u8) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for libc-bin (2.28-10+deb10u2) ...
Removing intermediate container 8f97a51fd794
---> b80fedf4c053
Step 10/39 : RUN mkdir /var/run/sshd
---> Running in caf96a46728b
Removing intermediate container caf96a46728b
---> 0336ef6be7d6
Step 11/39 : COPY ssh /root/.ssh
---> c2bfa127698a
Step 12/39 : COPY --chown=jenkins:jenkins ssh /home/jenkins/.ssh
---> 8e025d45c530
Step 13/39 : RUN chmod -R 0700 /home/jenkins/.ssh /root/.ssh
---> Running in 69853e9b1363
Removing intermediate container 69853e9b1363
---> 8252375a71a6
Step 14/39 : RUN mkdir -p /osmo-gsm-tester-srsue /osmo-gsm-tester-srsenb
/osmo-gsm-tester-srsepc /osmo-gsm-tester-trx
/osmo-gsm-tester-grbroker /osmo-gsm-tester-open5gs
---> Running in 1f72effe874d
Removing intermediate container 1f72effe874d
---> 7d6ce08c0319
Step 15/39 : RUN chown -R jenkins:jenkins /osmo-gsm-tester-*
---> Running in e2c289ceadf0
Removing intermediate container e2c289ceadf0
---> 63e58f3a126e
Step 16/39 : RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/'
/etc/locale.gen && dpkg-reconfigure --frontend=noninteractive locales
&& update-locale LANG=en_US.UTF-8
---> Running in 0156fd1da173
[91mGenerating locales (this might take a while)...
[0m[91m en_US.UTF-8[0m[91m...[0m[91m done
[0m[91mGeneration complete.
[0mRemoving intermediate container 0156fd1da173
---> e890c2d572f1
Step 17/39 : ENV LANG en_US.UTF-8
---> Running in 1c45cffc77d3
Removing intermediate container 1c45cffc77d3
---> 8d1884e82d7a
Step 18/39 : ADD
https://github.com/NixOS/patchelf/archive/0.11.tar.gz
/tmp/patchelf-0.11.tar.gz
failed to get destination image
"sha256:8d1884e82d7a8dd84d335ae8bef31c2f4d815375145383f106ab1a045d3d8b8e": No
such image: sha256:8d1884e82d7a8dd84d335ae8bef31c2f4d815375145383f106ab1a045d3d8b8e
make: *** [../make/Makefile:90: docker-build] Error 1
make: Leaving directory
'<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=osmo-gsm-tester-prod/ws/_docker_playground/osmo-gsm-tester'>
+ exit 1
Build step 'Execute shell' marked build as failure