See https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-latest/2095/display/redirect?page=changes

Changes:

[Oliver Smith] ttcn3-ggsn-test/jenkins: tweak loop logic

------------------------------------------ [...truncated 69.44 KB...] #6 41.17 Setting up libunwind8:amd64 (1.6.2-3) ... #6 41.23 Setting up libjansson4:amd64 (2.14-2) ... #6 41.29 Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg-10) ... #6 41.36 Setting up libcap2-bin (1:2.66-4) ... #6 41.44 Setting up libtalloc2:amd64 (2.4.0-f2) ... #6 41.50 Setting up libasound2-data (1.2.8-1) ... #6 41.57 Setting up libklibc:amd64 (2.0.12-1) ... #6 41.64 Setting up perl-modules-5.36 (5.36.0-7+deb12u1) ... #6 41.70 Setting up rpcsvc-proto (1.4.3-1) ... #6 41.76 Setting up libjpeg62-turbo:amd64 (1:2.1.5-2) ... #6 41.81 Setting up busybox-static (1:1.35.0-4+b3) ... #6 41.86 Setting up make (4.3-4.1) ... #6 41.91 Setting up libepoxy0:amd64 (1.5.10-1) ... #6 41.96 Setting up libmpfr6:amd64 (4.2.0-1) ... #6 42.02 Setting up libnspr4:amd64 (2:4.35-1) ... #6 42.07 Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b2) ... #6 42.12 Setting up libopus0:amd64 (1.3.1-3) ... #6 42.19 Setting up libquadmath0:amd64 (12.2.0-14) ... #6 42.23 Setting up libssl-dev:amd64 (3.0.13-1~deb12u1) ... #6 42.28 Setting up libpng16-16:amd64 (1.6.39-2) ... #6 42.34 Setting up libmpc3:amd64 (1.3.1-1) ... #6 42.39 Setting up libmnl0:amd64 (1.0.4-3) ... #6 42.44 Setting up libatomic1:amd64 (12.2.0-14) ... #6 42.49 Setting up libgssapi-krb5-2:amd64 (1.20.1-2+deb12u1) ... #6 42.55 Setting up liborc-0.4-0:amd64 (1:0.4.33-2) ... #6 42.60 Setting up libpcsclite1:amd64 (1.9.9-2) ... #6 42.65 Setting up libncursesw6:amd64 (6.4-4) ... #6 42.70 Setting up libfuse3-3:amd64 (3.14.0-4) ... #6 42.76 Setting up libxtables12:amd64 (1.8.9-2) ... #6 42.81 Setting up qemu-system-data (1:7.2+dfsg-7+deb12u6) ... #6 42.86 Setting up bridge-utils (1.7.1-1) ... #6 43.06 debconf: unable to initialize frontend: Dialog #6 43.06 debconf: (TERM is not set, so the dialog frontend is not usable.) #6 43.06 debconf: falling back to frontend: Readline #6 43.08 debconf: unable to initialize frontend: Readline #6 43.08 debconf: (This frontend requires a controlling tty.) #6 43.08 debconf: falling back to frontend: Teletype #6 43.14 Setting up libsasl2-2:amd64 (2.1.28+dfsg-10) ... #6 43.20 Setting up seabios (1.16.2-1) ... #6 43.25 Setting up libubsan1:amd64 (12.2.0-14) ... #6 43.31 Setting up libnuma1:amd64 (2.0.16-1) ... #6 43.36 Setting up libcapstone4:amd64 (4.0.2-5) ... #6 43.41 Setting up libslirp0:amd64 (4.7.0-1) ... #6 43.47 Setting up libsctp1:amd64 (1.0.19+dfsg-2) ... #6 43.53 Setting up libcrypt-dev:amd64 (1:4.4.33-2) ... #6 43.61 Setting up ipxe-qemu (1.0.0+git-20190125.36a4c85-5.1) ... #6 43.66 Setting up libasan8:amd64 (12.2.0-14) ... #6 43.71 Setting up libasound2:amd64 (1.2.8-1+b1) ... #6 43.77 Setting up libnl-3-200:amd64 (3.7.0-0.2+b1) ... #6 43.86 Setting up bison (2:3.8.2+dfsg-1+b1) ... #6 43.90 update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode #6 43.90 update-alternatives: warning: skip creation of /usr/share/man/man1/yacc.1.gz because associated file /usr/share/man/man1/bison.yacc.1.gz (of link group yacc) doesn't exist #6 43.94 Setting up git-man (1:2.39.2-1.1) ... #6 43.99 Setting up libssh2-1:amd64 (1.10.0-3+b1) ... #6 44.09 Setting up libbrlapi0.8:amd64 (6.5-7+deb12u1) ... #6 44.15 Setting up libusb-1.0-0:amd64 (2:1.0.26-1) ... #6 44.20 Setting up libtsan2:amd64 (12.2.0-14) ... #6 44.25 Setting up libbinutils:amd64 (2.40-2) ... #6 44.35 Setting up liburing2:amd64 (2.3-3) ... #6 44.41 Setting up libisl23:amd64 (0.25-1.1) ... #6 44.46 Setting up libaio1:amd64 (0.3.113-4) ... #6 44.52 Setting up libc-dev-bin (2.36-9+deb12u7) ... #6 44.57 Setting up klibc-utils (2.0.12-1) ... #6 44.63 No diversion 'diversion of /usr/share/initramfs-tools/hooks/klibc to /usr/share/initramfs-tools/hooks/klibc^i-t by klibc-utils', none removed. #6 44.65 Setting up libbsd0:amd64 (0.11.7-2) ... #6 44.71 Setting up libdrm-common (2.4.114-1) ... #6 44.76 Setting up libelf1:amd64 (0.188-2.1) ... #6 48.11 Setting up readline-common (8.2-1.3) ... #6 48.17 Setting up libcc1-0:amd64 (12.2.0-14) ... #6 48.23 Setting up iso-codes (4.15.0-1) ... #6 48.35 Setting up libbpf1:amd64 (1:1.1.0-1) ... #6 48.45 Setting up liblsan0:amd64 (12.2.0-14) ... #6 48.50 Setting up libitm1:amd64 (12.2.0-14) ... #6 48.57 Setting up libkmod2:amd64 (30+20221128-1) ... #6 48.68 Setting up libgdbm6:amd64 (1.23-3) ... #6 48.73 Setting up libctf0:amd64 (2.40-2) ... #6 48.82 Setting up libtirpc3:amd64 (1.3.3+ds-1) ... #6 48.93 Setting up libdw1:amd64 (0.188-2.1) ... #6 48.99 Setting up flex (2.6.4-8.2) ... #6 49.04 Setting up cpp-12 (12.2.0-14) ... #6 49.09 Setting up iproute2 (6.1.0-3) ... #6 49.51 debconf: unable to initialize frontend: Dialog #6 49.51 debconf: (TERM is not set, so the dialog frontend is not usable.) #6 49.51 debconf: falling back to frontend: Readline #6 49.51 debconf: unable to initialize frontend: Readline #6 49.51 debconf: (This frontend requires a controlling tty.) #6 49.51 debconf: falling back to frontend: Teletype #6 49.64 Setting up libgtpnl0:amd64 (1.2.5) ... #6 49.75 Setting up libreadline8:amd64 (8.2-1.3) ... #6 49.81 Setting up libvdeplug2:amd64 (4.0.1-4) ... #6 49.87 Setting up bc (1.07.1-3+b1) ... #6 49.92 Setting up libnss3:amd64 (2:3.87.1-1) ... #6 49.98 Setting up kmod (30+20221128-1) ... #6 50.06 Setting up libcacard0:amd64 (1:2.8.0-3) ... #6 50.12 Setting up libldap-2.5-0:amd64 (2.5.13+dfsg-5) ... #6 50.18 Setting up libnl-route-3-200:amd64 (3.7.0-0.2+b1) ... #6 50.23 Setting up libgprofng0:amd64 (2.40-2) ... #6 50.29 Setting up libtirpc-dev:amd64 (1.3.3+ds-1) ... #6 50.34 Setting up libosmocore21:amd64 (1.9.3) ... #6 50.40 Setting up libgcc-12-dev:amd64 (12.2.0-14) ... #6 50.46 Setting up udev (252.26-1~deb12u2) ... #6 51.52 invoke-rc.d: could not determine current runlevel #6 51.53 invoke-rc.d: policy-rc.d denied execution of start. #6 51.55 Setting up libgdbm-compat4:amd64 (1.23-3) ... #6 51.61 Setting up libdaxctl1:amd64 (76.1-1) ... #6 51.66 Setting up libsndio7.0:amd64 (1.9.0-0.3+b2) ... #6 51.76 Setting up libdrm2:amd64 (2.4.114-1+b1) ... #6 51.82 Setting up cpp (4:12.2.0-3) ... #6 51.88 Setting up libnsl2:amd64 (1.3.0-2) ... #6 51.99 Setting up libndctl6:amd64 (76.1-1) ... #6 52.04 Setting up initramfs-tools-core (0.142) ... #6 52.16 Setting up libpmem1:amd64 (1.12.1-2) ... #6 52.21 Setting up libperl5.36:amd64 (5.36.0-7+deb12u1) ... #6 52.26 Setting up libgstreamer1.0-0:amd64 (1.22.0-2) ... #6 52.33 Setcap worked! gst-ptp-helper is not suid! #6 52.35 Setting up binutils-x86-64-linux-gnu (2.40-2) ... #6 52.40 Setting up libibverbs1:amd64 (44.0-2) ... #6 52.62 Setting up initramfs-tools (0.142) ... #6 52.72 update-initramfs: deferring update (trigger activated) #6 52.83 Setting up libosmovty13:amd64 (1.9.3) ... #6 52.89 Setting up libgbm1:amd64 (22.3.6-1+deb12u1) ... #6 52.95 Setting up libosmoisdn0:amd64 (1.9.3) ... #6 53.05 Setting up libpython3.11-stdlib:amd64 (3.11.2-6+deb12u2) ... #6 53.10 Setting up libgstreamer-plugins-base1.0-0:amd64 (1.22.0-3+deb12u2) ... #6 53.15 Setting up libcurl3-gnutls:amd64 (7.88.1-10+deb12u6) ... #6 53.20 Setting up binutils (2.40-2) ... #6 53.26 Setting up linux-image-6.1.0-22-amd64 (6.1.94-1) ... #6 54.13 I: /vmlinuz.old is now a symlink to boot/vmlinuz-6.1.0-22-amd64 #6 54.13 I: /initrd.img.old is now a symlink to boot/initrd.img-6.1.0-22-amd64 #6 54.13 I: /vmlinuz is now a symlink to boot/vmlinuz-6.1.0-22-amd64 #6 54.13 I: /initrd.img is now a symlink to boot/initrd.img-6.1.0-22-amd64 #6 54.14 /etc/kernel/postinst.d/initramfs-tools: #6 54.14 update-initramfs: Generating /boot/initrd.img-6.1.0-22-amd64 #6 54.16 W: No zstd in /usr/bin:/sbin:/bin, using gzip #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125b-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125a-3.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168fp-3.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169 #6 56.72 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169 #6 57.88 I: The initramfs will attempt to resume from /dev/md1 #6 57.88 I: Set the RESUME variable to override this. #6 62.33 Setting up libgtp6:amd64 (1.11.0) ... #6 62.38 Setting up perl (5.36.0-7+deb12u1) ... #6 62.46 Setting up gcc-12 (12.2.0-14) ... #6 62.55 Setting up libnsl-dev:amd64 (1.3.0-2) ... #6 62.61 Setting up libc6-dev:amd64 (2.36-9+deb12u7) ... #6 62.68 Setting up libosmogsm20:amd64 (1.9.3) ... #6 62.73 Setting up libpython3-stdlib:amd64 (3.11.2-1+b1) ... #6 62.78 Setting up librdmacm1:amd64 (44.0-2) ... #6 62.83 Setting up python3.11 (3.11.2-6+deb12u2) ... #6 63.27 Setting up libosmoctrl0:amd64 (1.9.3) ... #6 63.32 Setting up libspice-server1:amd64 (0.15.1-1) ... #6 63.36 Setting up python3 (3.11.2-1+b1) ... #6 63.40 running python rtupdate hooks for python3.11... #6 63.40 running python post-rtupdate hooks for python3.11... #6 63.46 Setting up linux-image-amd64 (6.1.94-1) ... #6 63.51 Setting up gcc (4:12.2.0-3) ... #6 63.60 Setting up liberror-perl (0.17029-2) ... #6 63.65 Setting up osmo-ggsn (1.11.0) ... #6 63.80 invoke-rc.d: could not determine current runlevel #6 63.80 invoke-rc.d: policy-rc.d denied execution of start. #6 63.82 Setting up git (1:2.39.2-1.1) ... #6 63.89 Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ... #6 63.94 Setting up qemu-system-common (1:7.2+dfsg-7+deb12u6) ... #6 64.03 Setting up python3-pyelftools (0.29-1) ... #6 64.18 Setting up qemu-system-x86 (1:7.2+dfsg-7+deb12u6) ... #6 64.24 Setting up libelf-dev:amd64 (0.188-2.1) ... #6 64.29 Setting up pax-utils (1.3.7-1) ... #6 64.35 Processing triggers for libc-bin (2.36-9+deb12u7) ... #6 64.41 Processing triggers for initramfs-tools (0.142) ... #6 64.45 update-initramfs: Generating /boot/initrd.img-6.1.0-22-amd64 #6 64.46 W: No zstd in /usr/bin:/sbin:/bin, using gzip FATAL: command execution failed java.io.EOFException at java.base/java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2915) at java.base/java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3410) at java.base/java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:954) at java.base/java.io.ObjectInputStream.<init>(ObjectInputStream.java:392) at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: java.io.IOException: Backing channel 'build4-deb12build-ansible' is disconnected. at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:215) at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:285) at jdk.proxy2/jdk.proxy2.$Proxy135.isAlive(Unknown Source) at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1212) at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1204) at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:195) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:145) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:818) at hudson.model.Build$BuildExecution.build(Build.java:199) at hudson.model.Build$BuildExecution.doRun(Build.java:164) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:526) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) FATAL: Unable to delete script file /tmp/jenkins8529619625347496130.sh java.io.EOFException at java.base/java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2915) at java.base/java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3410) at java.base/java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:954) at java.base/java.io.ObjectInputStream.<init>(ObjectInputStream.java:392) at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@791ea911:build4-deb12build-ansible": Remote call on build4-deb12build-ansible failed. The channel is closing down or has closed down at hudson.remoting.Channel.call(Channel.java:996) at hudson.FilePath.act(FilePath.java:1192) at hudson.FilePath.act(FilePath.java:1181) at hudson.FilePath.delete(FilePath.java:1728) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:163) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:818) at hudson.model.Build$BuildExecution.build(Build.java:199) at hudson.model.Build$BuildExecution.doRun(Build.java:164) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:526) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) Build step 'Execute shell' marked build as failure ERROR: Step ‘Publish JUnit test result report’ failed: no workspace for ttcn3-ggsn-test-latest #2095