See https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/2770/display/redirect?page=changes

Changes:

[Pau Espin Pedrol] struct gsm_bts: Add model_priv pointer handing bts_model specific data

[Pau Espin Pedrol] bts-trx: Allocate struct osmo_trx_clock_state as part of bts-trx private

[Pau Espin Pedrol] bts-trx: vty: Print phy link state in cmd 'show transceiver'

[Pau Espin Pedrol] bts-trx: trx_set_bts(): Avoid double loop by checking current trx

[Pau Espin Pedrol] bts-trx: Rework code handling poweron state

[Pau Espin Pedrol] bts-trx: Don't reset transceiver_available in scheduler_trx.c

[Pau Espin Pedrol] bts-trx: Get rid of messy transceiver_available state handler

[Pau Espin Pedrol] bts-trx: Drop unused func check_transceiver_availability()

------------------------------------------ [...truncated 170.02 KB...] make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/examples' Making check in manuals make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/manuals' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/manuals' make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc' Making check in contrib make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib' Making check in systemd make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib/systemd' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib/systemd' make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib' make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' make[1]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' + DISTCHECK_CONFIGURE_FLAGS= --enable-sanitize --with-oc2g=https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/deps/layer1-headers/inc/ --enable-oc2g make distcheck make dist-bzip2 dist-gzip am__post_remove_distdir='@:' make[1]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' if test -d "osmo-bts-1.1.0.31-b6be"; then find "osmo-bts-1.1.0.31-b6be" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.1.0.31-b6be" || { sleep 5 && rm -rf "osmo-bts-1.1.0.31-b6be"; }; else :; fi test -d "osmo-bts-1.1.0.31-b6be" || mkdir "osmo-bts-1.1.0.31-b6be" (cd include && make top_distdir=../osmo-bts-1.1.0.31-b6be distdir=../osmo-bts-1.1.0.31-b6be/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include' (cd osmo-bts && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/include/osmo-bts \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include/osmo-bts' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include/osmo-bts' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include' (cd src && make top_distdir=../osmo-bts-1.1.0.31-b6be distdir=../osmo-bts-1.1.0.31-b6be/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src' (cd common && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/common \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/common' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/common' (cd osmo-bts-virtual && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-virtual \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-virtual' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-virtual' (cd osmo-bts-omldummy && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-omldummy \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-omldummy' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-omldummy' (cd osmo-bts-sysmo && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-sysmo \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-sysmo' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-sysmo' (cd osmo-bts-trx && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-trx \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-trx' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-trx' (cd osmo-bts-octphy && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-octphy \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-octphy' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-octphy' (cd osmo-bts-litecell15 && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-litecell15 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-litecell15' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-litecell15' (cd osmo-bts-oc2g && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/src/osmo-bts-oc2g \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-oc2g' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/osmo-bts-oc2g' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src' (cd tests && make top_distdir=../osmo-bts-1.1.0.31-b6be distdir=../osmo-bts-1.1.0.31-b6be/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests' (cd paging && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/paging \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/paging' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/paging' (cd cipher && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/cipher \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/cipher' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/cipher' (cd agch && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/agch \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/agch' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/agch' (cd misc && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/misc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/misc' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/misc' (cd handover && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/handover \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/handover' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/handover' (cd tx_power && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/tx_power \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/tx_power' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/tx_power' (cd power && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/power \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/power' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/power' (cd meas && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/meas \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/meas' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/meas' (cd sysmobts && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/tests/sysmobts \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/sysmobts' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests/sysmobts' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/tests' (cd doc && make top_distdir=../osmo-bts-1.1.0.31-b6be distdir=../osmo-bts-1.1.0.31-b6be/doc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc' (cd examples && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/doc/examples \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/examples' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/examples' (cd manuals && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/doc/manuals \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/manuals' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc/manuals' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/doc' (cd contrib && make top_distdir=../osmo-bts-1.1.0.31-b6be distdir=../osmo-bts-1.1.0.31-b6be/contrib \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib' (cd systemd && make top_distdir=../../osmo-bts-1.1.0.31-b6be distdir=../../osmo-bts-1.1.0.31-b6be/contrib/systemd \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib/systemd' make[3]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib/systemd' make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/contrib' make \ top_distdir="osmo-bts-1.1.0.31-b6be" distdir="osmo-bts-1.1.0.31-b6be" \ dist-hook make[2]: Entering directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' echo 1.1.0.31-b6be > osmo-bts-1.1.0.31-b6be/.tarball-version make[2]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' test -n "" \ || find "osmo-bts-1.1.0.31-b6be" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} ; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} ; -o \ ! -type d ! -perm -400 -exec chmod a+r {} ; -o \ ! -type d ! -perm -444 -exec /bin/bash https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/install-sh -c -m a+r {} {} ; \ || chmod -R a+r "osmo-bts-1.1.0.31-b6be" tardir=osmo-bts-1.1.0.31-b6be && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-bts-1.1.0.31-b6be.tar.bz2 tardir=osmo-bts-1.1.0.31-b6be && ${TAR-tar} chof - "$tardir" | GZIP=--best gzip -c >osmo-bts-1.1.0.31-b6be.tar.gz make[1]: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/' if test -d "osmo-bts-1.1.0.31-b6be"; then find "osmo-bts-1.1.0.31-b6be" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.1.0.31-b6be" || { sleep 5 && rm -rf "osmo-bts-1.1.0.31-b6be"; }; else :; fi case 'osmo-bts-1.1.0.31-b6be.tar.gz osmo-bts-1.1.0.31-b6be.tar.bz2' in \ *.tar.gz*) \ GZIP=--best gzip -dc osmo-bts-1.1.0.31-b6be.tar.gz | ${TAR-tar} xf - ;;\ *.tar.bz2*) \ bzip2 -dc osmo-bts-1.1.0.31-b6be.tar.bz2 | ${TAR-tar} xf - ;;\ *.tar.lz*) \ lzip -dc osmo-bts-1.1.0.31-b6be.tar.lz | ${TAR-tar} xf - ;;\ *.tar.xz*) \ xz -dc osmo-bts-1.1.0.31-b6be.tar.xz | ${TAR-tar} xf - ;;\ *.tar.Z*) \ uncompress -c osmo-bts-1.1.0.31-b6be.tar.Z | ${TAR-tar} xf - ;;\ *.shar.gz*) \ GZIP=--best gzip -dc osmo-bts-1.1.0.31-b6be.shar.gz | unshar ;;\ *.zip*) \ unzip osmo-bts-1.1.0.31-b6be.zip ;;\ esac chmod -R a-w osmo-bts-1.1.0.31-b6be chmod u+w osmo-bts-1.1.0.31-b6be mkdir osmo-bts-1.1.0.31-b6be/_build osmo-bts-1.1.0.31-b6be/_build/sub osmo-bts-1.1.0.31-b6be/_inst chmod a-w osmo-bts-1.1.0.31-b6be test -d osmo-bts-1.1.0.31-b6be/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-bts-1.1.0.31-b6be/_inst && pwd | sed -e 's,^[^:\/]:[\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-bts-1.1.0.31-b6be/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-sanitize --with-oc2g=https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/deps/layer1-headers/inc/ --enable-oc2g \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-bts-1.1.0.31-b6be.tar.gz osmo-bts-1.1.0.31-b6be.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib /bin/bash: line 30: 6750 Illegal instruction ../../configure --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system --enable-sanitize --with-oc2g=https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/deps/layer1-headers/inc/ --enable-oc2g --srcdir=../.. --prefix="$dc_install_base" Makefile:642: recipe for target 'distcheck' failed make: *** [distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE