See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1120/display/redirect?page=changes
Changes:
[Oliver Smith] jobs/osmocom-obs: run against obs.osmocom.org too
[Oliver Smith] coverity: add osmo-bsc-nat
[laforge] install-coverity: update to 2021.12
------------------------------------------ [...truncated 7.61 KB...] ---> 7ccf5cd5c0a8 Step 6/11 : ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/latest/Debian_9.0/" ---> Running in f92dba24f8c8 Removing intermediate container f92dba24f8c8 ---> b942c48bdd96 Step 7/11 : RUN apt-get update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates telnet gnupg && apt-get clean ---> Running in d4285a9b6170 Get:1 http://security.debian.org/debian-security stretch/updates InRelease [53.0 kB] Ign:2 http://deb.debian.org/debian stretch InRelease Get:3 http://deb.debian.org/debian stretch-updates InRelease [93.6 kB] Get:4 http://deb.debian.org/debian stretch Release [118 kB] Get:5 http://deb.debian.org/debian stretch Release.gpg [3177 B] Get:6 http://security.debian.org/debian-security stretch/updates/main amd64 Packages [780 kB] Get:7 http://deb.debian.org/debian stretch/main amd64 Packages [7080 kB] Fetched 8127 kB in 1s (7123 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: gnupg-agent libassuan0 libksba8 libnpth0 libreadline7 libsqlite3-0 libssl1.1 netbase openssl pinentry-curses readline-common Suggested packages: parcimonie xloadimage dbus-user-session libpam-systemd pinentry-gnome3 scdaemon pinentry-doc readline-doc Recommended packages: dirmngr gnupg-l10n The following NEW packages will be installed: ca-certificates gnupg gnupg-agent libassuan0 libksba8 libnpth0 libreadline7 libsqlite3-0 libssl1.1 netbase openssl pinentry-curses readline-common telnet 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 5053 kB of archives. After this operation, 11.4 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian stretch/main amd64 libassuan0 amd64 2.4.3-2 [42.5 kB] Get:2 http://security.debian.org/debian-security stretch/updates/main amd64 libsqlite3-0 amd64 3.16.2-5+deb9u3 [574 kB] Get:3 http://deb.debian.org/debian stretch/main amd64 pinentry-curses amd64 1.0.0-2 [50.5 kB] Get:4 http://deb.debian.org/debian stretch/main amd64 libnpth0 amd64 1.3-1 [14.6 kB] Get:5 http://deb.debian.org/debian stretch/main amd64 readline-common all 7.0-3 [70.4 kB] Get:6 http://deb.debian.org/debian stretch/main amd64 libreadline7 amd64 7.0-3 [151 kB] Get:7 http://deb.debian.org/debian stretch/main amd64 gnupg-agent amd64 2.1.18-8~deb9u4 [554 kB] Get:8 http://security.debian.org/debian-security stretch/updates/main amd64 libssl1.1 amd64 1.1.0l-1~deb9u6 [1360 kB] Get:9 http://deb.debian.org/debian stretch/main amd64 libksba8 amd64 1.3.5-2 [99.7 kB] Get:10 http://deb.debian.org/debian stretch/main amd64 gnupg amd64 2.1.18-8~deb9u4 [1128 kB] Get:11 http://deb.debian.org/debian stretch/main amd64 netbase all 5.4 [19.1 kB] Get:12 http://deb.debian.org/debian stretch/main amd64 telnet amd64 0.17-41 [72.0 kB] Get:13 http://security.debian.org/debian-security stretch/updates/main amd64 openssl amd64 1.1.0l-1~deb9u6 [749 kB] Get:14 http://security.debian.org/debian-security stretch/updates/main amd64 ca-certificates all 20200601~deb9u2 [168 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 5053 kB in 0s (61.2 MB/s) Selecting previously unselected package libassuan0:amd64. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 6502 files and directories currently installed.) Preparing to unpack .../00-libassuan0_2.4.3-2_amd64.deb ... Unpacking libassuan0:amd64 (2.4.3-2) ... Selecting previously unselected package pinentry-curses. Preparing to unpack .../01-pinentry-curses_1.0.0-2_amd64.deb ... Unpacking pinentry-curses (1.0.0-2) ... Selecting previously unselected package libnpth0:amd64. Preparing to unpack .../02-libnpth0_1.3-1_amd64.deb ... Unpacking libnpth0:amd64 (1.3-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../03-readline-common_7.0-3_all.deb ... Unpacking readline-common (7.0-3) ... Selecting previously unselected package libreadline7:amd64. Preparing to unpack .../04-libreadline7_7.0-3_amd64.deb ... Unpacking libreadline7:amd64 (7.0-3) ... Selecting previously unselected package gnupg-agent. Preparing to unpack .../05-gnupg-agent_2.1.18-8~deb9u4_amd64.deb ... Unpacking gnupg-agent (2.1.18-8~deb9u4) ... Selecting previously unselected package libksba8:amd64. Preparing to unpack .../06-libksba8_1.3.5-2_amd64.deb ... Unpacking libksba8:amd64 (1.3.5-2) ... Selecting previously unselected package libsqlite3-0:amd64. Preparing to unpack .../07-libsqlite3-0_3.16.2-5+deb9u3_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.16.2-5+deb9u3) ... Selecting previously unselected package gnupg. Preparing to unpack .../08-gnupg_2.1.18-8~deb9u4_amd64.deb ... Unpacking gnupg (2.1.18-8~deb9u4) ... Selecting previously unselected package libssl1.1:amd64. Preparing to unpack .../09-libssl1.1_1.1.0l-1~deb9u6_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.0l-1~deb9u6) ... Selecting previously unselected package netbase. Preparing to unpack .../10-netbase_5.4_all.deb ... Unpacking netbase (5.4) ... Selecting previously unselected package telnet. Preparing to unpack .../11-telnet_0.17-41_amd64.deb ... Unpacking telnet (0.17-41) ... Selecting previously unselected package openssl. Preparing to unpack .../12-openssl_1.1.0l-1~deb9u6_amd64.deb ... Unpacking openssl (1.1.0l-1~deb9u6) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../13-ca-certificates_20200601~deb9u2_all.deb ... Unpacking ca-certificates (20200601~deb9u2) ... Setting up libnpth0:amd64 (1.3-1) ... Setting up readline-common (7.0-3) ... Setting up libreadline7:amd64 (7.0-3) ... Setting up libksba8:amd64 (1.3.5-2) ... Processing triggers for libc-bin (2.24-11+deb9u4) ... Setting up libssl1.1:amd64 (1.1.0l-1~deb9u6) ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/x86_64-linux-gnu/perl5/5.24 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Setting up openssl (1.1.0l-1~deb9u6) ... Setting up libsqlite3-0:amd64 (3.16.2-5+deb9u3) ... Setting up ca-certificates (20200601~deb9u2) ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/x86_64-linux-gnu/perl5/5.24 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Updating certificates in /etc/ssl/certs... 137 added, 0 removed; done. Setting up libassuan0:amd64 (2.4.3-2) ... Setting up netbase (5.4) ... Setting up telnet (0.17-41) ... update-alternatives: using /usr/bin/telnet.netkit to provide /usr/bin/telnet (telnet) in auto mode Setting up pinentry-curses (1.0.0-2) ... Setting up gnupg-agent (2.1.18-8~deb9u4) ... Setting up gnupg (2.1.18-8~deb9u4) ... Processing triggers for libc-bin (2.24-11+deb9u4) ... Processing triggers for ca-certificates (20200601~deb9u2) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Removing intermediate container d4285a9b6170 ---> 9e5bad92de05 Step 8/11 : COPY .common/Release.key /tmp/Release.key ---> b8df43d1ea9b Step 9/11 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key && echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-latest.list ---> Running in 0faf9bb0986d [91mWarning: apt-key output should not be parsed (stdout is not a terminal) [0mOK Removing intermediate container 0faf9bb0986d ---> 9f03dcc7d125 Step 10/11 : COPY .common/respawn.sh /usr/local/bin/respawn.sh ---> da0915ee7d2c Step 11/11 : ADD $OSMOCOM_REPO/Release /tmp/Release
---> 99c38c905c69 [Warning] One or more build-args [OSMOCOM_REPO_VERSION OSMO_HLR_BRANCH OSMO_HNBGW_BRANCH OSMO_TTCN3_BRANCH OSMO_UECUPS_BRANCH OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_IUH_BRANCH UID USER OSMO_BSC_BRANCH OSMO_MGW_BRANCH OSMO_PCU_BRANCH OSMO_SGSN_BRANCH OPEN5GS_BRANCH OSMO_GGSN_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_HNODEB_BRANCH OSMO_BB_BRANCH LIBOSMOCORE_BRANCH OSMO_BTS_BRANCH OSMO_GBPROXY_BRANCH OSMO_SIP_BRANCH OSMO_STP_BRANCH DISTRO OSMO_CBC_BRANCH OSMO_MSC_BRANCH OSMO_NITB_BRANCH] were not consumed Successfully built 99c38c905c69 Successfully tagged osmocom-build/debian-stretch-obs-latest:latest rm -rf .common make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest' + docker_image_exists debian-stretch-obs-latest + docker images -q osmocom-build/debian-stretch-obs-latest + test -n 99c38c905c69 + list_osmo_packages debian-bullseye debian-stretch-obs-latest + local distro=debian-bullseye + local image=debian-stretch-obs-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-stretch-obs-latest -c + [ -n ] + return + [ = registry.osmocom.org ] + docker_depends debian-stretch-build-dist + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-stretch-build-dist + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-stretch-build-dist + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian-stretch-build-dist + echo debian-stretch-build-dist + dir=debian-stretch-build-dist + pull_arg=--pull + grep ^FROM ../debian-stretch-build-dist/Dockerfile + from_line=FROM $USER/debian-stretch-obs-latest + echo FROM $USER/debian-stretch-obs-latest + grep -q $USER + pull_arg= + echo Building image: debian-stretch-build-dist (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-stretch-build-dist (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-stretch-build-dist BUILD_ARGS= UPSTREAM_DISTRO=debian:stretch DISTRO=debian-bullseye IMAGE=osmocom-build/debian-stretch-build-dist make: Entering directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-build-dist' rm -rf .common cp -r https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/common .common docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:stretch \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/debian-stretch-build-dist:latest . Sending build context to Docker daemon 25.09kB Step 1/3 : ARG USER Step 2/3 : FROM $USER/debian-stretch-obs-latest ---> 99c38c905c69 Step 3/3 : RUN apt-get update && apt-get install -y --no-install-recommends asciidoc autoconf autoconf-archive autogen automake bison build-essential ca-certificates dahdi-source dblatex git graphviz inkscape libasn1c-dev libboost-all-dev libc-ares-dev libcsv-dev libdbd-sqlite3 libdbi-dev libfftw3-dev libgnutls28-dev libgps-dev libgsm1-dev libgtp-dev libgtpnl-dev liblimesuite-dev libncurses5-dev liboping-dev liborcania-dev libortp-dev libosmo-abis-dev libosmo-gsup-client-dev libosmo-hnbap-dev libosmo-mgcp-client-dev libosmo-netif-dev libosmo-ranap-dev libnl-route-3-dev libosmo-rua-dev libosmo-sccp-dev libosmo-sigtran-dev libosmo-simtrace2-dev libosmocore-dev libosmodsp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsmpp34-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtool libuhd-dev libulfius-dev libusb-1.0-0-dev libusb-dev libusrp-dev libyder-dev libzmq3-dev make mscgen python-nwdiag python-pychart python3-nwdiag xsltproc && apt-get clean ---> Running in 544fa4c429ad Hit:1 http://security.debian.org/debian-security stretch/updates InRelease Ign:2 http://deb.debian.org/debian stretch InRelease Hit:3 http://deb.debian.org/debian stretch-updates InRelease Hit:4 http://deb.debian.org/debian stretch Release Reading package lists... [91mE: The method driver /usr/lib/apt/methods/https could not be found. E: Failed to fetch https://downloads.osmocom.org/packages/osmocom:/latest/Debian_9.0/./InReleas... E: Some index files failed to download. They have been ignored, or old ones used instead. [0mThe command '/bin/sh -c apt-get update && apt-get install -y --no-install-recommends asciidoc autoconf autoconf-archive autogen automake bison build-essential ca-certificates dahdi-source dblatex git graphviz inkscape libasn1c-dev libboost-all-dev libc-ares-dev libcsv-dev libdbd-sqlite3 libdbi-dev libfftw3-dev libgnutls28-dev libgps-dev libgsm1-dev libgtp-dev libgtpnl-dev liblimesuite-dev libncurses5-dev liboping-dev liborcania-dev libortp-dev libosmo-abis-dev libosmo-gsup-client-dev libosmo-hnbap-dev libosmo-mgcp-client-dev libosmo-netif-dev libosmo-ranap-dev libnl-route-3-dev libosmo-rua-dev libosmo-sccp-dev libosmo-sigtran-dev libosmo-simtrace2-dev libosmocore-dev libosmodsp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsmpp34-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtool libuhd-dev libulfius-dev libusb-1.0-0-dev libusb-dev libusrp-dev libyder-dev libzmq3-dev make mscgen python-nwdiag python-pychart python3-nwdiag xsltproc && apt-get clean' returned a non-zero code: 100 ../make/Makefile:90: recipe for target 'docker-build' failed make: *** [docker-build] Error 100 make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-build-dist' + exit 1 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 19305 killed; [ssh-agent] Stopped.
See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1121/display/redirect?page=changes
Changes:
[Oliver Smith] ansible/gsm-tester: use debian's soapysdr-module-lms7
[Oliver Smith] osmo-ci-docker-rebuild: don't always build osmo-gsm-tester
[Oliver Smith] jobs/update-osmo-*: change mail recipients
[Vadim Yanitskiy] coverity/build_Osmocom.sh: run 'make check' in do_build()
------------------------------------------ Started by user Oliver Smith Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ [ssh-agent] Looking for ssh-agent implementation... [ssh-agent] Exec ssh-agent (binary ssh-agent on a remote machine) $ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-OAPfSDqFRpkk/agent.12708 SSH_AGENT_PID=12710 [ssh-agent] Started. Running ssh-add (command line suppressed) Identity added: https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/private_key_2545393158181378203.key (https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/private_key_2545393158181378203.key) [ssh-agent] Using credentials releases (upload via rsync to to what gets published at https://ftp.osmocom.org/releases/) The recommended git tool is: NONE No credentials specified
git rev-parse --resolve-git-dir https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/.git # timeout=10
Fetching changes from the remote Git repository
git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10
Fetching upstream changes from git://git.osmocom.org/osmo-ci
git --version # timeout=10 git --version # 'git version 2.11.0' git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 git rev-parse origin/master^{commit} # timeout=10
Checking out Revision bf84ba9f69a0a2125bfd4327519b0e6fa212d664 (origin/master)
git config core.sparsecheckout # timeout=10 git checkout -f bf84ba9f69a0a2125bfd4327519b0e6fa212d664 # timeout=10
Commit message: "coverity/build_Osmocom.sh: run 'make check' in do_build()"
git rev-list --no-walk bab323da5295087dbe5fd4a1896d6c9d176d0099 # timeout=10
[Osmocom-release-tarballs] $ /bin/sh -xe /tmp/jenkins6876328490288032265.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + . scripts/common.sh + dirname /tmp/jenkins6876328490288032265.sh + realpath /tmp/.. + OSMO_CI_DIR=/ + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-netif libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmocom-bb simtrace2
+ OSMO_BRANCH_DOCKER_PLAYGROUND=master + docker_images_require debian-stretch-obs-latest debian-stretch-build-dist + local oldpwd=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ + [ -L _docker_playground ] + [ -d _docker_playground ] + git -C _docker_playground fetch From https://git.osmocom.org/docker-playground fb6b142..de110d4 master -> origin/master + cd _docker_playground + git checkout master Already on 'master' Your branch is behind 'origin/master' by 3 commits, and can be fast-forwarded. (use "git pull" to update your local branch) + git reset --hard origin/master HEAD is now at de110d4 release-tarball-build-dist: move osmo-ci code here + cd debian-stretch-obs-latest + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/_cache + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/scripts/kernel-test + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ xhttps://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ = x ] + VOL_BASE_DIR=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs + rm -rf https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs + mkdir -p https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs + [ ! -d https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs ] + [ xjenkins-Osmocom-release-tarballs-1121 = x ] + basename https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest + SUITE_NAME=debian-stretch-obs-latest + NET_NAME=debian-stretch-obs-latest + docker_images_require debian-stretch-obs-latest debian-stretch-build-dist + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-stretch-obs-latest + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-stretch-obs-latest + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-stretch-obs-latest + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian-stretch-obs-latest + echo debian-stretch-obs-latest + dir=debian-stretch-obs-latest + pull_arg=--pull + grep ^FROM ../debian-stretch-obs-latest/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + echo Building image: debian-stretch-obs-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-stretch-obs-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-stretch-obs-latest BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:stretch DISTRO=debian-bullseye IMAGE=osmocom-build/debian-stretch-obs-latest make: Entering directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest' rm -rf .common cp -r https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/common .common docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:stretch \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-stretch-obs-latest:latest . Sending build context to Docker daemon 24.58kB Step 1/11 : ARG REGISTRY=docker.io Step 2/11 : ARG UPSTREAM_DISTRO=debian:stretch Step 3/11 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} stretch: Pulling from library/debian Digest: sha256:c5c5200ff1e9c73ffbf188b4a67eb1c91531b644856b4aefe86a58d2f0cb05be Status: Image is up to date for debian:stretch ---> 662c05203bab Step 4/11 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" ---> Using cache ---> bed0aa880572 Step 5/11 : ARG OSMOCOM_REPO_PATH="packages/osmocom:" ---> Using cache ---> 7ccf5cd5c0a8 Step 6/11 : ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/latest/Debian_9.0/" ---> Using cache ---> b942c48bdd96 Step 7/11 : RUN apt-get update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates telnet gnupg && apt-get clean ---> Using cache ---> 9e5bad92de05 Step 8/11 : COPY .common/Release.key /tmp/Release.key ---> Using cache ---> b8df43d1ea9b Step 9/11 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key && echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-latest.list ---> Using cache ---> 9f03dcc7d125 Step 10/11 : COPY .common/respawn.sh /usr/local/bin/respawn.sh ---> Using cache ---> da0915ee7d2c Step 11/11 : ADD $OSMOCOM_REPO/Release /tmp/Release
---> 8de1afd1fb4f [Warning] One or more build-args [OSMO_BTS_BRANCH OSMO_HNBGW_BRANCH OSMO_HNODEB_BRANCH OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_IUH_BRANCH UID USER OSMO_HLR_BRANCH OSMO_MGW_BRANCH OSMO_SIP_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_SGSN_BRANCH OSMO_GBPROXY_BRANCH OSMO_BSC_BRANCH OSMO_CBC_BRANCH OSMO_NITB_BRANCH OSMO_GGSN_BRANCH OSMO_UECUPS_BRANCH LIBOSMOCORE_BRANCH OPEN5GS_BRANCH OSMO_BB_BRANCH OSMO_PCU_BRANCH OSMO_STP_BRANCH OSMO_TTCN3_BRANCH DISTRO OSMOCOM_REPO_VERSION OSMO_MSC_BRANCH] were not consumed Successfully built 8de1afd1fb4f Successfully tagged osmocom-build/debian-stretch-obs-latest:latest rm -rf .common make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest' + docker_image_exists debian-stretch-obs-latest + docker images -q osmocom-build/debian-stretch-obs-latest + test -n 8de1afd1fb4f + list_osmo_packages debian-bullseye debian-stretch-obs-latest + local distro=debian-bullseye + local image=debian-stretch-obs-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-stretch-obs-latest -c + [ -n ] + return + [ = registry.osmocom.org ] + docker_depends debian-stretch-build-dist + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-stretch-build-dist + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-stretch-build-dist + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian-stretch-build-dist + echo debian-stretch-build-dist + dir=debian-stretch-build-dist + pull_arg=--pull + grep ^FROM ../debian-stretch-build-dist/Dockerfile grep: ../debian-stretch-build-dist/Dockerfile: No such file or directory + from_line= Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 12710 killed; [ssh-agent] Stopped.
See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1122/display/redirect
Changes:
------------------------------------------ Started by user Oliver Smith Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ [ssh-agent] Looking for ssh-agent implementation... [ssh-agent] Exec ssh-agent (binary ssh-agent on a remote machine) $ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-Zm4ePkxge2v2/agent.26540 SSH_AGENT_PID=26544 [ssh-agent] Started. Running ssh-add (command line suppressed) Identity added: https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/private_key_6542256741849741267.key (https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/private_key_6542256741849741267.key) [ssh-agent] Using credentials releases (upload via rsync to to what gets published at https://ftp.osmocom.org/releases/) The recommended git tool is: NONE No credentials specified
git rev-parse --resolve-git-dir https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/.git # timeout=10
Fetching changes from the remote Git repository
git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10
Fetching upstream changes from git://git.osmocom.org/osmo-ci
git --version # timeout=10 git --version # 'git version 2.11.0' git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 git rev-parse origin/master^{commit} # timeout=10
Checking out Revision bf84ba9f69a0a2125bfd4327519b0e6fa212d664 (origin/master)
git config core.sparsecheckout # timeout=10 git checkout -f bf84ba9f69a0a2125bfd4327519b0e6fa212d664 # timeout=10
Commit message: "coverity/build_Osmocom.sh: run 'make check' in do_build()"
git rev-list --no-walk bf84ba9f69a0a2125bfd4327519b0e6fa212d664 # timeout=10
[Osmocom-release-tarballs] $ /bin/sh -xe /tmp/jenkins1536088496654843350.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + . scripts/common.sh + dirname /tmp/jenkins1536088496654843350.sh + realpath /tmp/.. + OSMO_CI_DIR=/ + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-netif libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmocom-bb simtrace2
+ OSMO_BRANCH_DOCKER_PLAYGROUND=master + docker_images_require debian-stretch-obs-latest debian-stretch-build-dist + local oldpwd=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ + [ -L _docker_playground ] + [ -d _docker_playground ] + git -C _docker_playground fetch + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at de110d4 release-tarball-build-dist: move osmo-ci code here + cd debian-stretch-obs-latest + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/_cache + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/scripts/kernel-test + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ xhttps://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ = x ] + VOL_BASE_DIR=https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs + rm -rf https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs + mkdir -p https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs + [ ! -d https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/logs ] + [ xjenkins-Osmocom-release-tarballs-1122 = x ] + basename https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest + SUITE_NAME=debian-stretch-obs-latest + NET_NAME=debian-stretch-obs-latest + docker_images_require debian-stretch-obs-latest debian-stretch-build-dist + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-stretch-obs-latest + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-stretch-obs-latest + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-stretch-obs-latest + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian-stretch-obs-latest + echo debian-stretch-obs-latest + dir=debian-stretch-obs-latest + pull_arg=--pull + grep ^FROM ../debian-stretch-obs-latest/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + echo Building image: debian-stretch-obs-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-stretch-obs-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-stretch-obs-latest BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:stretch DISTRO=debian-bullseye IMAGE=osmocom-build/debian-stretch-obs-latest make: Entering directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest' rm -rf .common cp -r https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/common .common docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:stretch \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-stretch-obs-latest:latest . Sending build context to Docker daemon 24.58kB Step 1/11 : ARG REGISTRY=docker.io Step 2/11 : ARG UPSTREAM_DISTRO=debian:stretch Step 3/11 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} stretch: Pulling from library/debian Digest: sha256:c5c5200ff1e9c73ffbf188b4a67eb1c91531b644856b4aefe86a58d2f0cb05be Status: Image is up to date for debian:stretch ---> 662c05203bab Step 4/11 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" ---> Using cache ---> bed0aa880572 Step 5/11 : ARG OSMOCOM_REPO_PATH="packages/osmocom:" ---> Using cache ---> 7ccf5cd5c0a8 Step 6/11 : ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/latest/Debian_9.0/" ---> Using cache ---> b942c48bdd96 Step 7/11 : RUN apt-get update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates telnet gnupg && apt-get clean ---> Using cache ---> 9e5bad92de05 Step 8/11 : COPY .common/Release.key /tmp/Release.key ---> Using cache ---> b8df43d1ea9b Step 9/11 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key && echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-latest.list ---> Using cache ---> 9f03dcc7d125 Step 10/11 : COPY .common/respawn.sh /usr/local/bin/respawn.sh ---> Using cache ---> da0915ee7d2c Step 11/11 : ADD $OSMOCOM_REPO/Release /tmp/Release
---> Using cache ---> 8de1afd1fb4f [Warning] One or more build-args [OSMOCOM_REPO_VERSION OSMO_BSC_BRANCH OSMO_SIP_BRANCH OSMO_CBC_BRANCH OSMO_HLR_BRANCH OSMO_IUH_BRANCH LIBOSMOCORE_BRANCH OSMO_SGSN_BRANCH USER DISTRO OSMO_BB_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_HNODEB_BRANCH OSMO_PCU_BRANCH OSMO_NITB_BRANCH OSMO_UECUPS_BRANCH OPEN5GS_BRANCH OSMO_BTS_BRANCH OSMO_MGW_BRANCH OSMO_STP_BRANCH OSMO_TTCN3_BRANCH OSMO_MSC_BRANCH UID OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_GBPROXY_BRANCH OSMO_GGSN_BRANCH OSMO_HNBGW_BRANCH] were not consumed Successfully built 8de1afd1fb4f Successfully tagged osmocom-build/debian-stretch-obs-latest:latest rm -rf .common make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-obs-latest' + docker_image_exists debian-stretch-obs-latest + docker images -q osmocom-build/debian-stretch-obs-latest + test -n 8de1afd1fb4f + list_osmo_packages debian-bullseye debian-stretch-obs-latest + local distro=debian-bullseye + local image=debian-stretch-obs-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-stretch-obs-latest -c + [ -n ] + return + [ = registry.osmocom.org ] + docker_depends debian-stretch-build-dist + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-stretch-build-dist + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-stretch-build-dist + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian-stretch-build-dist + echo debian-stretch-build-dist + dir=debian-stretch-build-dist + pull_arg=--pull + grep ^FROM ../debian-stretch-build-dist/Dockerfile grep: ../debian-stretch-build-dist/Dockerfile: No such file or directory + from_line= Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 26544 killed; [ssh-agent] Stopped.
See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1123/display/redirect
Changes:
------------------------------------------ Started by user Oliver Smith Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/ [ssh-agent] Looking for ssh-agent implementation... [ssh-agent] Exec ssh-agent (binary ssh-agent on a remote machine) $ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-1bBWw9PuNCHr/agent.3550 SSH_AGENT_PID=3552 [ssh-agent] Started. Running ssh-add (command line suppressed) Identity added: https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/private_key_3325612875804302549.key (https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/private_key_3325612875804302549.key) [ssh-agent] Using credentials releases (upload via rsync to to what gets published at https://ftp.osmocom.org/releases/) The recommended git tool is: NONE No credentials specified
git rev-parse --resolve-git-dir https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/.git # timeout=10
Fetching changes from the remote Git repository
git config remote.origin.url git://git.osmocom.org/docker-playground # timeout=10
Fetching upstream changes from git://git.osmocom.org/docker-playground
git --version # timeout=10 git --version # 'git version 2.11.0' git fetch --tags --progress -- git://git.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 git rev-parse origin/master^{commit} # timeout=10
Checking out Revision de110d422def639a217862e16c70fcef36459a8a (origin/master)
git config core.sparsecheckout # timeout=10 git checkout -f de110d422def639a217862e16c70fcef36459a8a # timeout=10
Commit message: "release-tarball-build-dist: move osmo-ci code here" First time build. Skipping changelog. [Osmocom-release-tarballs] $ /bin/sh -xe /tmp/jenkins6579339826494723336.sh + cd release-tarballs-build-dist /tmp/jenkins6579339826494723336.sh: 2: cd: can't cd to release-tarballs-build-dist Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3552 killed; [ssh-agent] Stopped.
See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1124/display/redirect
Changes:
------------------------------------------ [...truncated 2.02 MB...] test -n "" \ || find "libosmocore-0.9.3" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} ; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} ; -o \ ! -type d ! -perm -400 -exec chmod a+r {} ; -o \ ! -type d ! -perm -444 -exec /bin/bash /build/_temp/repos/libosmocore/install-sh -c -m a+r {} {} ; \ || chmod -R a+r "libosmocore-0.9.3" make[1]: Leaving directory '/build/_temp/repos/libosmocore' tardir=libosmocore-0.9.3 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >libosmocore-0.9.3.tar.bz2 if test -d "libosmocore-0.9.3"; then find "libosmocore-0.9.3" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libosmocore-0.9.3" || { sleep 5 && rm -rf "libosmocore-0.9.3"; }; else :; fi + set +x libosmocore-0.9.4.tar.bz2 (creating) + prepare_repo libosmocore 0.9.4 + local repo=libosmocore + local tag=0.9.4 + [ -d /build/_temp/repos/libosmocore ] + cd /build/_temp/repos/libosmocore + git clean -qdxf + git reset --hard HEAD HEAD is now at abc46af9 debian: Make a new minor release + git checkout -q 0.9.4 + prepare_depends libosmocore + cd /build/_temp/repos/libosmocore + autoreconf -fi libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:14: installing './compile' configure.ac:16: installing './config.guess' configure.ac:16: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' src/Makefile.am: installing './depcomp' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for library containing dlopen... -ldl checking for backtrace in -lexecinfo... no checking for doxygen... false checking if gcc supports -fvisibility=hidden... yes checking whether struct tm has tm_gmtoff member... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for talloc >= 2.0.1... yes checking for libpcsclite... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating libosmogb.pc config.status: creating libosmoctrl.pc config.status: creating libosmosim.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/sim/Makefile config.status: creating src/gsm/Makefile config.status: creating src/gb/Makefile config.status: creating src/ctrl/Makefile config.status: creating tests/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + fix_repo libosmocore + make dist-bzip2 echo 0.9.4 > .version-t && mv .version-t .version make distdir-am make[1]: Entering directory '/build/_temp/repos/libosmocore' if test -d "libosmocore-0.9.4"; then find "libosmocore-0.9.4" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libosmocore-0.9.4" || { sleep 5 && rm -rf "libosmocore-0.9.4"; }; else :; fi test -d "libosmocore-0.9.4" || mkdir "libosmocore-0.9.4" (cd include && make top_distdir=../libosmocore-0.9.4 distdir=../libosmocore-0.9.4/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/include' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/include' GEN osmocom/core/bit16gen.h GEN osmocom/core/bit16gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc8gen.h GEN osmocom/core/crc8gen.h make[3]: Leaving directory '/build/_temp/repos/libosmocore/include' make[2]: Leaving directory '/build/_temp/repos/libosmocore/include' (cd src && make top_distdir=../libosmocore-0.9.4 distdir=../libosmocore-0.9.4/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src' GEN crc8gen.c GEN crc16gen.c GEN crc32gen.c GEN crc64gen.c make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src' (cd src/vty && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/vty \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/vty' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/vty' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/vty' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/vty' (cd src/codec && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/codec \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/codec' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/codec' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/codec' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/codec' (cd src/gsm && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/gsm \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/gsm' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/gsm' GEN conv_cs2_gen.c /bin/bash: line 1: python2: command not found make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/gsm' make[3]: *** [Makefile:921: conv_cs2_gen.c] Error 127 make[2]: *** [Makefile:668: distdir] Error 2 make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/gsm' make[1]: *** [Makefile:628: distdir-am] Error 1 make[1]: Leaving directory '/build/_temp/repos/libosmocore' make: *** [Makefile:622: distdir] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 20541 killed; [ssh-agent] Stopped.
See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1125/display/redirect
Changes:
------------------------------------------ [...truncated 17.81 KB...] libosmocore-0.6.4.tar.bz2 (exists) libosmocore-0.6.5.tar.bz2 (exists) libosmocore-0.6.6.tar.bz2 (exists) libosmocore-0.7.0.tar.bz2 (exists) libosmocore-0.8.0.tar.bz2 (exists) libosmocore-0.8.2.tar.bz2 (exists) libosmocore-0.8.3.tar.bz2 (exists) libosmocore-0.9.0.tar.bz2 (exists) libosmocore-0.9.3.tar.bz2 (exists) libosmocore-0.9.4.tar.bz2 (creating) + prepare_repo libosmocore 0.9.4 + local repo=libosmocore + local tag=0.9.4 + [ -d /build/_temp/repos/libosmocore ] + git -C /build/_temp/repos clone https://git.osmocom.org/libosmocore Cloning into 'libosmocore'... + cd /build/_temp/repos/libosmocore + git clean -qdxf + git reset --hard HEAD HEAD is now at 4f41d59f fix uninitialized err pointer passed to osmo_bssap_le_dec() + git checkout -q 0.9.4 + prepare_depends libosmocore + cd /build/_temp/repos/libosmocore + autoreconf -fi libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:14: installing './compile' configure.ac:16: installing './config.guess' configure.ac:16: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' src/Makefile.am: installing './depcomp' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for library containing dlopen... -ldl checking for backtrace in -lexecinfo... no checking for doxygen... false checking if gcc supports -fvisibility=hidden... yes checking whether struct tm has tm_gmtoff member... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for talloc >= 2.0.1... yes checking for libpcsclite... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating libosmogb.pc config.status: creating libosmoctrl.pc config.status: creating libosmosim.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/sim/Makefile config.status: creating src/gsm/Makefile config.status: creating src/gb/Makefile config.status: creating src/ctrl/Makefile config.status: creating tests/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + fix_repo libosmocore + make dist-bzip2 echo 0.9.4 > .version-t && mv .version-t .version make distdir-am make[1]: Entering directory '/build/_temp/repos/libosmocore' if test -d "libosmocore-0.9.4"; then find "libosmocore-0.9.4" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libosmocore-0.9.4" || { sleep 5 && rm -rf "libosmocore-0.9.4"; }; else :; fi test -d "libosmocore-0.9.4" || mkdir "libosmocore-0.9.4" (cd include && make top_distdir=../libosmocore-0.9.4 distdir=../libosmocore-0.9.4/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/include' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/include' GEN osmocom/core/bit16gen.h GEN osmocom/core/bit16gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc8gen.h GEN osmocom/core/crc8gen.h make[3]: Leaving directory '/build/_temp/repos/libosmocore/include' make[2]: Leaving directory '/build/_temp/repos/libosmocore/include' (cd src && make top_distdir=../libosmocore-0.9.4 distdir=../libosmocore-0.9.4/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src' GEN crc8gen.c GEN crc16gen.c GEN crc32gen.c GEN crc64gen.c make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src' (cd src/vty && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/vty \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/vty' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/vty' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/vty' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/vty' (cd src/codec && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/codec \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/codec' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/codec' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/codec' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/codec' (cd src/gsm && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/gsm \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/gsm' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/gsm' GEN conv_cs2_gen.c /bin/bash: line 1: python2: command not found make[3]: *** [Makefile:921: conv_cs2_gen.c] Error 127 make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/gsm' make[2]: *** [Makefile:668: distdir] Error 2 make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/gsm' make[1]: *** [Makefile:628: distdir-am] Error 1 make[1]: Leaving directory '/build/_temp/repos/libosmocore' make: *** [Makefile:622: distdir] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 25572 killed; [ssh-agent] Stopped.
See https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1126/display/redirect
Changes:
------------------------------------------ [...truncated 255.57 KB...] libosmocore-0.6.4.tar.bz2 (exists) libosmocore-0.6.5.tar.bz2 (exists) libosmocore-0.6.6.tar.bz2 (exists) libosmocore-0.7.0.tar.bz2 (exists) libosmocore-0.8.0.tar.bz2 (exists) libosmocore-0.8.2.tar.bz2 (exists) libosmocore-0.8.3.tar.bz2 (exists) libosmocore-0.9.0.tar.bz2 (exists) libosmocore-0.9.3.tar.bz2 (exists) libosmocore-0.9.4.tar.bz2 (creating) + prepare_repo libosmocore 0.9.4 + local repo=libosmocore + local tag=0.9.4 + [ -d /build/_temp/repos/libosmocore ] + git -C /build/_temp/repos clone https://git.osmocom.org/libosmocore Cloning into 'libosmocore'... + cd /build/_temp/repos/libosmocore + git clean -qdxf + git reset --hard HEAD HEAD is now at 09e5409c iuup: Explicitly mark default case as unexpected with assert + git checkout -q 0.9.4 + prepare_depends libosmocore + cd /build/_temp/repos/libosmocore + autoreconf -fi libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:14: installing './compile' configure.ac:16: installing './config.guess' configure.ac:16: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' src/Makefile.am: installing './depcomp' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for library containing dlopen... -ldl checking for backtrace in -lexecinfo... no checking for doxygen... false checking if gcc supports -fvisibility=hidden... yes checking whether struct tm has tm_gmtoff member... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for talloc >= 2.0.1... yes checking for libpcsclite... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating libosmogb.pc config.status: creating libosmoctrl.pc config.status: creating libosmosim.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/sim/Makefile config.status: creating src/gsm/Makefile config.status: creating src/gb/Makefile config.status: creating src/ctrl/Makefile config.status: creating tests/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + fix_repo libosmocore + make dist-bzip2 echo 0.9.4 > .version-t && mv .version-t .version make distdir-am make[1]: Entering directory '/build/_temp/repos/libosmocore' if test -d "libosmocore-0.9.4"; then find "libosmocore-0.9.4" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libosmocore-0.9.4" || { sleep 5 && rm -rf "libosmocore-0.9.4"; }; else :; fi test -d "libosmocore-0.9.4" || mkdir "libosmocore-0.9.4" (cd include && make top_distdir=../libosmocore-0.9.4 distdir=../libosmocore-0.9.4/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/include' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/include' GEN osmocom/core/bit16gen.h GEN osmocom/core/bit16gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc8gen.h GEN osmocom/core/crc8gen.h make[3]: Leaving directory '/build/_temp/repos/libosmocore/include' make[2]: Leaving directory '/build/_temp/repos/libosmocore/include' (cd src && make top_distdir=../libosmocore-0.9.4 distdir=../libosmocore-0.9.4/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src' GEN crc8gen.c GEN crc16gen.c GEN crc32gen.c GEN crc64gen.c make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src' (cd src/vty && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/vty \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/vty' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/vty' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/vty' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/vty' (cd src/codec && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/codec \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/codec' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/codec' make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/codec' make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/codec' (cd src/gsm && make top_distdir=../../libosmocore-0.9.4 distdir=../../libosmocore-0.9.4/src/gsm \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/build/_temp/repos/libosmocore/src/gsm' make distdir-am make[3]: Entering directory '/build/_temp/repos/libosmocore/src/gsm' GEN conv_cs2_gen.c /bin/bash: line 1: python2: command not found make[3]: *** [Makefile:921: conv_cs2_gen.c] Error 127 make[3]: Leaving directory '/build/_temp/repos/libosmocore/src/gsm' make[2]: *** [Makefile:668: distdir] Error 2 make[2]: Leaving directory '/build/_temp/repos/libosmocore/src/gsm' make[1]: *** [Makefile:628: distdir-am] Error 1 make[1]: Leaving directory '/build/_temp/repos/libosmocore' make: *** [Makefile:622: distdir] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 9535 killed; [ssh-agent] Stopped.
jenkins-notifications@lists.osmocom.org
-
jenkins＠lists.osmocom.org