See https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,WITH_MANUALS=0,a3=default,a4=default,label=raspbian/8440/display/redirect

Changes:

------------------------------------------ [...truncated 107.32 KiB...] during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[5]: Leaving directory '/build/deps/libusrp/host/lib' make[4]: Leaving directory '/build/deps/libusrp/host/lib' make[3]: Leaving directory '/build/deps/libusrp/host/lib' Making install in include make[3]: Entering directory '/build/deps/libusrp/host/include' Making install in usrp make[4]: Entering directory '/build/deps/libusrp/host/include/usrp' make install-am make[5]: Entering directory '/build/deps/libusrp/host/include/usrp' GEN version.h GEN version.h make[6]: Entering directory '/build/deps/libusrp/host/include/usrp' make[6]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libusrp/include/gnuradio/swig' /usr/bin/install -c -m 644 db_base.i '/build/deps/install/stow/libusrp/include/gnuradio/swig' /usr/bin/mkdir -p '/build/deps/install/stow/libusrp/include/usrp' /usr/bin/install -c -m 644 db_base.h db_basic.h db_bitshark_rx.h db_dbs_rx.h db_dtt754.h db_dtt768.h db_flexrf.h db_flexrf_mimo.h db_tv_rx.h db_tv_rx_mimo.h db_wbxng.h db_xcvr2450.h libusb_types.h usrp_basic.h usrp_bytesex.h usrp_dbid.h usrp_local_sighandler.h usrp_prims.h usrp_slots.h usrp_standard.h usrp_subdev_spec.h usrp_tune_result.h version.h '/build/deps/install/stow/libusrp/include/usrp' make[6]: Leaving directory '/build/deps/libusrp/host/include/usrp' make[5]: Leaving directory '/build/deps/libusrp/host/include/usrp' make[4]: Leaving directory '/build/deps/libusrp/host/include/usrp' make[4]: Entering directory '/build/deps/libusrp/host/include' make[5]: Entering directory '/build/deps/libusrp/host/include' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libusrp/host/include' make[4]: Leaving directory '/build/deps/libusrp/host/include' make[3]: Leaving directory '/build/deps/libusrp/host/include' Making install in apps make[3]: Entering directory '/build/deps/libusrp/host/apps' make install-am make[4]: Entering directory '/build/deps/libusrp/host/apps' CXX usrper.o CXXLD usrper CXX usrp_cal_dc_offset.o In file included from usrp_cal_dc_offset.cc:37: ../../host/include/usrp/usrp_bytesex.h:37:2: warning: #warning Using non-portable code (likely wrong other than ILP32). [-Wcpp] 37 | #warning Using non-portable code (likely wrong other than ILP32). | ^~~~~~~ CXXLD usrp_cal_dc_offset CXX check_order_quickly.o CXXLD check_order_quickly CXX test_usrp_standard_rx.o In file included from test_usrp_standard_rx.cc:36: ../../host/include/usrp/usrp_bytesex.h:37:2: warning: #warning Using non-portable code (likely wrong other than ILP32). [-Wcpp] 37 | #warning Using non-portable code (likely wrong other than ILP32). | ^~~~~~~ CC time_stuff.o CXXLD test_usrp_standard_rx CXX test_usrp_standard_tx.o In file included from test_usrp_standard_tx.cc:37: ../../host/include/usrp/usrp_bytesex.h:37:2: warning: #warning Using non-portable code (likely wrong other than ILP32). [-Wcpp] 37 | #warning Using non-portable code (likely wrong other than ILP32). | ^~~~~~~ CXXLD test_usrp_standard_tx make[5]: Entering directory '/build/deps/libusrp/host/apps' /usr/bin/mkdir -p '/build/deps/install/stow/libusrp/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c usrper usrp_cal_dc_offset '/build/deps/install/stow/libusrp/bin' libtool: install: /usr/bin/install -c .libs/usrper /build/deps/install/stow/libusrp/bin/usrper libtool: install: /usr/bin/install -c .libs/usrp_cal_dc_offset /build/deps/install/stow/libusrp/bin/usrp_cal_dc_offset make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libusrp/host/apps' make[4]: Leaving directory '/build/deps/libusrp/host/apps' make[3]: Leaving directory '/build/deps/libusrp/host/apps' make[3]: Entering directory '/build/deps/libusrp/host' make[4]: Entering directory '/build/deps/libusrp/host' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libusrp/host' make[3]: Leaving directory '/build/deps/libusrp/host' make[2]: Leaving directory '/build/deps/libusrp/host' Making install in fpga make[2]: Entering directory '/build/deps/libusrp/fpga' Making install in rbf make[3]: Entering directory '/build/deps/libusrp/fpga/rbf' Making install in rev2 make[4]: Entering directory '/build/deps/libusrp/fpga/rbf/rev2' make install-am make[5]: Entering directory '/build/deps/libusrp/fpga/rbf/rev2' make[6]: Entering directory '/build/deps/libusrp/fpga/rbf/rev2' make[6]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libusrp/share/usrp/rev2' /usr/bin/install -c -m 644 std_2rxhb_2tx.rbf std_4rx_0tx.rbf inband_1rxhb_1tx.rbf inband_2rxhb_2tx.rbf multi_2rxhb_2tx.rbf '/build/deps/install/stow/libusrp/share/usrp/rev2' make[6]: Leaving directory '/build/deps/libusrp/fpga/rbf/rev2' make[5]: Leaving directory '/build/deps/libusrp/fpga/rbf/rev2' make[4]: Leaving directory '/build/deps/libusrp/fpga/rbf/rev2' Making install in rev4 make[4]: Entering directory '/build/deps/libusrp/fpga/rbf/rev4' make install-am make[5]: Entering directory '/build/deps/libusrp/fpga/rbf/rev4' make[6]: Entering directory '/build/deps/libusrp/fpga/rbf/rev4' make[6]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libusrp/share/usrp/rev4' /usr/bin/install -c -m 644 std_2rxhb_2tx.rbf std_4rx_0tx.rbf inband_1rxhb_1tx.rbf inband_2rxhb_2tx.rbf multi_2rxhb_2tx.rbf '/build/deps/install/stow/libusrp/share/usrp/rev4' make[6]: Leaving directory '/build/deps/libusrp/fpga/rbf/rev4' make[5]: Leaving directory '/build/deps/libusrp/fpga/rbf/rev4' make[4]: Leaving directory '/build/deps/libusrp/fpga/rbf/rev4' make[4]: Entering directory '/build/deps/libusrp/fpga/rbf' make[5]: Entering directory '/build/deps/libusrp/fpga/rbf' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libusrp/fpga/rbf' make[4]: Leaving directory '/build/deps/libusrp/fpga/rbf' make[3]: Leaving directory '/build/deps/libusrp/fpga/rbf' make[3]: Entering directory '/build/deps/libusrp/fpga' make[4]: Entering directory '/build/deps/libusrp/fpga' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libusrp/fpga' make[3]: Leaving directory '/build/deps/libusrp/fpga' make[2]: Leaving directory '/build/deps/libusrp/fpga' Making install in doc make[2]: Entering directory '/build/deps/libusrp/doc' make install-recursive make[3]: Entering directory '/build/deps/libusrp/doc' Making install in other make[4]: Entering directory '/build/deps/libusrp/doc/other' make install-am make[5]: Entering directory '/build/deps/libusrp/doc/other' make[6]: Entering directory '/build/deps/libusrp/doc/other' make[6]: Nothing to be done for 'install-exec-am'. make[6]: Nothing to be done for 'install-data-am'. make[6]: Leaving directory '/build/deps/libusrp/doc/other' make[5]: Leaving directory '/build/deps/libusrp/doc/other' make[4]: Leaving directory '/build/deps/libusrp/doc/other' make[4]: Entering directory '/build/deps/libusrp/doc' make[5]: Entering directory '/build/deps/libusrp/doc' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Leaving directory '/build/deps/libusrp/doc' make[4]: Leaving directory '/build/deps/libusrp/doc' make[3]: Leaving directory '/build/deps/libusrp/doc' make[2]: Leaving directory '/build/deps/libusrp/doc' Making install in firmware make[2]: Entering directory '/build/deps/libusrp/firmware' Making install in include make[3]: Entering directory '/build/deps/libusrp/firmware/include' PYTHONPATH=../../usrp/firmware/include ./generate_regs.py ./fpga_regs_common.h fpga_regs_common.v /build/deps/libusrp/firmware/include/./generate_regs.py:36: SyntaxWarning: invalid escape sequence '\s' if re.match ('//|\s*$', line): # comment or blank line PYTHONPATH=../../usrp/firmware/include ./generate_regs.py ./fpga_regs_standard.h fpga_regs_standard.v /build/deps/libusrp/firmware/include/./generate_regs.py:36: SyntaxWarning: invalid escape sequence '\s' if re.match ('//|\s*$', line): # comment or blank line make[4]: Entering directory '/build/deps/libusrp/firmware/include' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libusrp/include/usrp' /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '/build/deps/install/stow/libusrp/include/usrp' make[4]: Leaving directory '/build/deps/libusrp/firmware/include' make[3]: Leaving directory '/build/deps/libusrp/firmware/include' Making install in lib make[3]: Entering directory '/build/deps/libusrp/firmware/lib' sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel isr.c:73: warning 94: comparison is always false due to limited range of data type isr.c:100: warning 94: comparison is always false due to limited range of data type sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel timer.c:45: warning 158: overflow in implicit constant conversion sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier usb_common.c:140: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char __xdata' to type 'volatile-unsigned-char __xdata* fixed' usb_common.c:143: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char __xdata' to type 'volatile-unsigned-char __xdata* fixed' usb_common.c:148: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char __xdata' to type 'volatile-unsigned-char __xdata* fixed' usb_common.c:150: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char __xdata* fixed' usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '/build/deps/libusrp/firmware/lib' Making install in src make[3]: Entering directory '/build/deps/libusrp/firmware/src' Making install in common make[4]: Entering directory '/build/deps/libusrp/firmware/src/common' make[5]: Entering directory '/build/deps/libusrp/firmware/src/common' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libusrp/firmware/src/common' make[4]: Leaving directory '/build/deps/libusrp/firmware/src/common' Making install in usrp2 make[4]: Entering directory '/build/deps/libusrp/firmware/src/usrp2' test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . test -f ../common/`basename 'eeprom_boot.a51'` -o \ ! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f ../common/`basename '_startup.a51'` -o \ ! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel ./../common/build_eeprom.py -p/build/deps/install/stow/libusrp -r2 eeprom_boot.ihx > burn-usrp2-eeprom chmod +x burn-usrp2-eeprom ./../common/build_eeprom.py -p/build/deps/install/stow/libusrp -r4 eeprom_boot.ihx > burn-usrp4-eeprom chmod +x burn-usrp4-eeprom test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . test -f ../common/`basename 'vectors.a51'` -o \ ! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename 'vectors.a51'` srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c usrp_main.asm:1389: Error: <a> Branching Range Exceeded. removing usrp_main.rel make[4]: Leaving directory '/build/deps/libusrp/firmware/src/usrp2' make[4]: *** [Makefile:666: usrp_main.rel] Error 1 make[3]: *** [Makefile:410: install-recursive] Error 1 make[3]: Leaving directory '/build/deps/libusrp/firmware/src' make[2]: *** [Makefile:410: install-recursive] Error 1 make[2]: Leaving directory '/build/deps/libusrp/firmware' make[1]: Leaving directory '/build/deps/libusrp' make[1]: *** [Makefile:638: install-recursive] Error 1 make: *** [Makefile:946: install] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3169418 killed; [ssh-agent] Stopped. Archiving artifacts