See https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/3114/display/redirect?page=changes
Changes:
[Oliver Smith] ttcn3-bts-test: fail on unexpected respawn count
------------------------------------------ [...truncated 147.27 KiB...] #7 4.080 checking for sys/stat.h... yes #7 4.117 checking for stdlib.h... yes #7 4.149 checking for string.h... yes #7 4.182 checking for memory.h... yes #7 4.211 checking for strings.h... yes #7 4.242 checking for inttypes.h... yes #7 4.271 checking for stdint.h... yes #7 4.303 checking for unistd.h... yes #7 4.338 checking for dlfcn.h... yes #7 4.359 checking for objdir... .libs #7 4.409 checking if gcc supports -fno-rtti -fno-exceptions... no #7 4.434 checking for gcc option to produce PIC... -fPIC -DPIC #7 4.435 checking if gcc PIC flag -fPIC -DPIC works... yes #7 4.474 checking if gcc static flag -static works... yes #7 4.552 checking if gcc supports -c -o file.o... yes #7 4.573 checking if gcc supports -c -o file.o... (cached) yes #7 4.574 checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes #7 4.590 checking whether -lc should be explicitly linked in... no #7 4.652 checking dynamic linker characteristics... GNU/Linux ld.so #7 4.713 checking how to hardcode library paths into programs... immediate #7 4.713 checking whether stripping libraries is possible... yes #7 4.717 checking if libtool supports shared libraries... yes #7 4.717 checking whether to build shared libraries... yes #7 4.717 checking whether to build static libraries... yes #7 4.719 checking for pkg-config... /usr/bin/pkg-config #7 4.719 checking pkg-config is at least version 0.9.0... yes #7 4.722 configure: checking for guile 2.0 #7 4.725 configure: found guile 2.0 #7 4.725 checking for ld used by gcc... /usr/bin/ld -m elf_x86_64 #7 4.729 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes #7 4.734 checking for shared library run path origin... done #7 4.761 checking for GUILE... yes #7 4.785 checking for Guile site directory... /usr/share/guile/site/2.0 #7 4.797 checking for sys/types.h... (cached) yes #7 4.816 checking sys/socket.h usability... yes #7 4.844 checking sys/socket.h presence... yes #7 4.850 checking for sys/socket.h... yes #7 4.854 checking netinet/in.h usability... yes #7 4.868 checking netinet/in.h presence... yes #7 4.874 checking for netinet/in.h... yes #7 4.878 checking netinet/sctp.h usability... yes #7 4.894 checking netinet/sctp.h presence... yes #7 4.900 checking for netinet/sctp.h... yes #7 4.902 checking whether byte ordering is bigendian... no #7 4.936 checking for working IPv6 support... yes #7 4.949 checking whether sockaddr_in6 has sin6_scope_id... yes #7 4.964 checking for struct sockaddr.sa_len... no #7 4.988 checking for struct sockaddr_in.sin_len... no #7 5.017 checking for struct sockaddr_in6.sin6_len... no #7 5.037 checking for sctp_sendmsg in -lsctp... yes #7 5.063 checking for sctp_recvmsg in -lsctp... yes #7 5.085 checking for sctp_sendmsg... yes #7 5.108 checking for sctp_recvmsg... yes #7 5.141 checking that generated files are newer than configure... done #7 5.141 configure: creating ./config.status #7 5.871 config.status: creating Makefile #7 5.884 config.status: creating config.h #7 5.898 config.status: executing depfiles commands #7 5.932 config.status: executing libtool commands #7 5.958 guile-snarf -o guile-sctp.x -DHAVE_CONFIG_H -pthread -I/usr/include/guile/2.0 -g -O2 guile-sctp.c #7 5.985 make all-am #7 5.986 make[1]: Entering directory '/tmp/guile-sctp' #7 5.986 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -pthread -I/usr/include/guile/2.0 -g -O2 -MT guile-sctp.lo -MD -MP -MF .deps/guile-sctp.Tpo -c -o guile-sctp.lo guile-sctp.c #7 6.002 libtool: compile: gcc -DHAVE_CONFIG_H -I. -pthread -I/usr/include/guile/2.0 -g -O2 -MT guile-sctp.lo -MD -MP -MF .deps/guile-sctp.Tpo -c guile-sctp.c -fPIC -DPIC -o .libs/guile-sctp.o #7 6.083 libtool: compile: gcc -DHAVE_CONFIG_H -I. -pthread -I/usr/include/guile/2.0 -g -O2 -MT guile-sctp.lo -MD -MP -MF .deps/guile-sctp.Tpo -c guile-sctp.c -o guile-sctp.o >/dev/null 2>&1 #7 6.153 mv -f .deps/guile-sctp.Tpo .deps/guile-sctp.Plo #7 6.154 /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -o libguile-net-sctp.la -rpath /usr/local/lib guile-sctp.lo -lsctp -lsctp #7 6.185 libtool: link: gcc -shared -fPIC -DPIC .libs/guile-sctp.o -lsctp -g -O2 -Wl,-soname -Wl,libguile-net-sctp.so.0 -o .libs/libguile-net-sctp.so.0.0.0 #7 6.198 libtool: link: (cd ".libs" && rm -f "libguile-net-sctp.so.0" && ln -s "libguile-net-sctp.so.0.0.0" "libguile-net-sctp.so.0") #7 6.204 libtool: link: (cd ".libs" && rm -f "libguile-net-sctp.so" && ln -s "libguile-net-sctp.so.0.0.0" "libguile-net-sctp.so") #7 6.210 libtool: link: ar cru .libs/libguile-net-sctp.a guile-sctp.o #7 6.212 ar: `u' modifier ignored since `D' is the default (see `U') #7 6.213 libtool: link: ranlib .libs/libguile-net-sctp.a #7 6.232 libtool: link: ( cd ".libs" && rm -f "libguile-net-sctp.la" && ln -s "../libguile-net-sctp.la" "libguile-net-sctp.la" ) #7 6.246 make[1]: Leaving directory '/tmp/guile-sctp' #7 6.252 make install-am #7 6.260 make[1]: Entering directory '/tmp/guile-sctp' #7 6.281 make[2]: Entering directory '/tmp/guile-sctp' #7 6.296 /bin/mkdir -p '/usr/local/lib' #7 6.297 /bin/bash ./libtool --mode=install /usr/bin/install -c libguile-net-sctp.la '/usr/local/lib' #7 6.329 libtool: install: /usr/bin/install -c .libs/libguile-net-sctp.so.0.0.0 /usr/local/lib/libguile-net-sctp.so.0.0.0 #7 6.330 libtool: install: (cd /usr/local/lib && { ln -s -f libguile-net-sctp.so.0.0.0 libguile-net-sctp.so.0 || { rm -f libguile-net-sctp.so.0 && ln -s libguile-net-sctp.so.0.0.0 libguile-net-sctp.so.0; }; }) #7 6.331 libtool: install: (cd /usr/local/lib && { ln -s -f libguile-net-sctp.so.0.0.0 libguile-net-sctp.so || { rm -f libguile-net-sctp.so && ln -s libguile-net-sctp.so.0.0.0 libguile-net-sctp.so; }; }) #7 6.332 libtool: install: /usr/bin/install -c .libs/libguile-net-sctp.lai /usr/local/lib/libguile-net-sctp.la #7 6.333 libtool: install: /usr/bin/install -c .libs/libguile-net-sctp.a /usr/local/lib/libguile-net-sctp.a #7 6.334 libtool: install: chmod 644 /usr/local/lib/libguile-net-sctp.a #7 6.335 libtool: install: ranlib /usr/local/lib/libguile-net-sctp.a #7 6.361 libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib #7 6.362 ---------------------------------------------------------------------- #7 6.362 Libraries have been installed in: #7 6.362 /usr/local/lib #7 6.362 #7 6.362 If you ever happen to want to link against installed libraries #7 6.362 in a given directory, LIBDIR, you must either use libtool, and #7 6.362 specify the full pathname of the library, or use the '-LLIBDIR' #7 6.362 flag during linking and do at least one of the following: #7 6.362 - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable #7 6.362 during execution #7 6.362 - add LIBDIR to the 'LD_RUN_PATH' environment variable #7 6.362 during linking #7 6.362 - use the '-Wl,-rpath -Wl,LIBDIR' linker flag #7 6.362 - have your system administrator add LIBDIR to '/etc/ld.so.conf' #7 6.362 #7 6.362 See any operating system documentation about shared libraries for #7 6.362 more information, such as the ld(1) and ld.so(8) manual pages. #7 6.362 ---------------------------------------------------------------------- #7 6.363 /bin/mkdir -p '/usr/share/guile/site/2.0/net' #7 6.364 /usr/bin/install -c -m 644 sctp.scm '/usr/share/guile/site/2.0/net' #7 6.365 make[2]: Leaving directory '/tmp/guile-sctp' #7 6.365 make[1]: Leaving directory '/tmp/guile-sctp' #7 DONE 6.5s
#8 exporting to image #8 exporting layers #8 exporting layers 1.7s done #8 writing image sha256:9f2cb0a19105b01f42c438a8468971702798135c5691dcfa3e19a00e6f076cf9 0.0s done #8 naming to docker.io/osmocom-build/sigtran-tests:latest 0.0s done #8 DONE 1.8s
[33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG $USER/debian-buster-build results in empty or invalid base image name (line 5) rm -rf .common make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/sigtran-tests' + docker_image_exists sigtran-tests + docker images -q osmocom-build/sigtran-tests + test -n 9f2cb0a19105 + list_osmo_packages debian-trixie sigtran-tests + local distro=debian-trixie + local image=sigtran-tests + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/sigtran-tests -c + [ -n ] + return + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends nplab-sua-test + local feed + depends= + [ -n ] + docker_distro_from_image_name nplab-sua-test + echo debian-trixie + distro_arg=debian-trixie + [ -z ] + docker_upstream_distro_from_image_name nplab-sua-test + echo debian:trixie + upstream_distro_arg=debian:trixie + docker_dir_from_image_name nplab-sua-test + echo nplab-sua-test + dir=nplab-sua-test + [ -z ] + pull_arg=--pull + grep ^FROM ../nplab-sua-test/Dockerfile + from_line=FROM $USER/sigtran-tests + echo FROM $USER/sigtran-tests + grep -q $USER + pull_arg= + set +x Building image: nplab-sua-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../nplab-sua-test BUILD_ARGS= UPSTREAM_DISTRO=debian:trixie DISTRO=debian-trixie IMAGE=osmocom-build/nplab-sua-test OSMO_TTCN3_BRANCH=master make: Entering directory 'https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/nplab-sua-test' awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/common .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:trixie \ --build-arg DISTRO=debian-trixie \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg M3UA_TESTTOOL_BRANCH=osmocom/master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_S1GW_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ -t osmocom-build/nplab-sua-test:latest . #0 building with "default" instance using docker driver
#1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 759B done #1 DONE 0.1s
#2 [internal] load metadata for docker.io/osmocom-build/sigtran-tests:latest #2 DONE 0.0s
#3 [internal] load .dockerignore #3 transferring context: #3 transferring context: 2B done #3 DONE 0.1s
#4 [ 3/10] ADD HTTPS://GITEA.OSMOCOM.ORG/API/V1/REPOS/NPLAB/SUA-TESTTOOL/GIT/REFS/HEADS/LAFORGE/PYTHON3 /tmp/commit #4 ERROR: Get "https://gitea.osmocom.org/api/v1/repos/nplab/sua-testtool/git/refs/heads/laf...": EOF
#5 [internal] load build context #5 transferring context: 13.15kB done #5 DONE 0.2s
#6 [ 1/10] FROM docker.io/osmocom-build/sigtran-tests:latest #6 DONE 0.3s ------
[ 3/10] ADD HTTPS://GITEA.OSMOCOM.ORG/API/V1/REPOS/NPLAB/SUA-TESTTOOL/GIT/REFS/HEADS/LAFORGE/PYTHON3 /tmp/commit:
------
[33m1 warning found (use docker --debug to expand): [0m - JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals (line 23) ERROR: failed to solve: failed to load cache key: Get "https://gitea.osmocom.org/api/v1/repos/nplab/sua-testtool/git/refs/heads/laf...": EOF make: *** [../make/Makefile:97: docker-build] Error 1 make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/nplab-sua-test' + exit 1 + RC=1 + + grepuptime --color=always -o load.* [01;31m[Kload average: 5.52, 4.78, 4.50[m[K + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
jenkins-notifications@lists.osmocom.org
-
jenkins＠lists.osmocom.org