See
<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/2089/display/redirect?page=changes>
Changes:
[Oliver Smith] ttcn3-ggsn-test/jenkins: tweak loop logic
------------------------------------------
[...truncated 122.92 KB...]
#8 148.6 Setting up uuid-dev:amd64 (2.33.1-0.1+deb10u1) ...
#8 148.6 Setting up stow (2.2.2-1) ...
#8 148.6 Setting up libio-html-perl (1.001-1) ...
#8 148.7 Setting up libb-hooks-op-check-perl (0.22-1+b1) ...
#8 148.7 Setting up libsctp-dev:amd64 (1.0.18+dfsg-1) ...
#8 148.8 Setting up libbctoolbox-dev (0.6.0-2+b2) ...
#8 148.8 Setting up libdpkg-perl (1.19.8) ...
#8 148.8 Setting up autoconf (2.69-11) ...
#8 148.9 Setting up cppcheck (1.86-1) ...
#8 148.9 Setting up libsub-exporter-progressive-perl (0.001013-1) ...
#8 149.0 Setting up libtimedate-perl (2.3000-2+deb10u1) ...
#8 149.0 Setting up module-assistant (0.11.10) ...
#8 149.0 Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-1+deb10u2) ...
#8 149.1 Setting up g++-8 (8.3.0-6) ...
#8 149.1 Setting up libncurses5-dev:amd64 (6.1+20181013-2+deb10u5) ...
#8 149.1 Setting up gnupg (2.2.12-1+deb10u2) ...
#8 149.2 Setting up python3-dateutil (2.7.3-3) ...
#8 149.3 Setting up libdevel-globaldestruction-perl (0.14-1) ...
#8 149.4 Setting up libstrictures-perl (2.000005-1) ...
#8 149.4 Setting up libsub-quote-perl (2.005001-1) ...
#8 149.4 Setting up python3-lib2to3 (3.7.3-1) ...
#8 149.6 Setting up libfftw3-dev:amd64 (3.3.8-2) ...
#8 149.6 Setting up liburi-perl (1.76-1) ...
#8 149.6 Setting up libortp13:amd64 (1:1.0.2-1) ...
#8 149.9 Setting up libnet-ssleay-perl (1.85-2+deb10u1) ...
#8 149.9 Setting up python3-pkg-resources (40.8.0-1) ...
#8 150.0 Setting up automake (1:1.16.1-4) ...
#8 150.1 update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake
(automake) in auto mode
#8 150.1 Setting up python3-distutils (3.7.3-1) ...
#8 150.2 Setting up libgnutls28-dev:amd64 (3.6.7-4+deb10u12) ...
#8 150.2 Setting up libglib2.0-dev-bin (2.58.3-2+deb10u6) ...
#8 150.3 Setting up libblkid-dev:amd64 (2.33.1-0.1+deb10u1) ...
#8 150.3 Setting up libhttp-date-perl (6.02-1) ...
#8 150.3 Setting up libfile-which-perl (1.23-1) ...
#8 150.3 Setting up libpcap-dev:amd64 (1.8.1-6+deb10u1) ...
#8 150.3 Setting up libfile-listing-perl (6.04-1) ...
#8 150.3 Setting up libdynaloader-functions-perl (0.003-1) ...
#8 150.4 Setting up libclass-method-modifiers-perl (2.12-1) ...
#8 150.4 Setting up libio-pty-perl (1:1.08-1.1+b5) ...
#8 150.4 Setting up libselinux1-dev:amd64 (2.8-1+b1) ...
#8 150.4 Setting up libarchive-zip-perl (1.64-1) ...
#8 150.4 Setting up libhtml-tagset-perl (3.20-3) ...
#8 150.4 Setting up liblwp-mediatypes-perl (6.02-1) ...
#8 150.4 Setting up libtry-tiny-perl (0.30-1) ...
#8 150.4 Setting up libnet-http-perl (6.18-1) ...
#8 150.4 Setting up libencode-locale-perl (1.05-1) ...
#8 150.4 Setting up libdevel-callchecker-perl (0.008-1) ...
#8 150.5 Setting up autogen (1:5.18.12-4) ...
#8 150.5 Setting up dpkg-dev (1.19.8) ...
#8 150.5 Setting up intltool-debian (0.35.0+20060710.5) ...
#8 150.5 Setting up liberror-perl (0.17027-2) ...
#8 150.5 Setting up patchutils (0.3.4-2) ...
#8 150.5 Setting up pkg-config (0.29-6) ...
#8 150.6 Setting up libipc-run-perl (20180523.0-1) ...
#8 150.6 Setting up git (1:2.20.1-2+deb10u9) ...
#8 150.6 Setting up libwww-robotrules-perl (6.02-1) ...
#8 150.6 Setting up g++ (4:8.3.0-1) ...
#8 150.6 update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto
mode
#8 150.6 Setting up libhtml-parser-perl (3.72-3+b3) ...
#8 150.6 Setting up librole-tiny-perl (2.000006-1) ...
#8 150.6 Setting up build-essential (12.6) ...
#8 150.7 Setting up libfile-homedir-perl (1.004-1) ...
#8 150.7 Setting up libgps-dev (3.17-7) ...
#8 150.7 Setting up libmount-dev:amd64 (2.33.1-0.1+deb10u1) ...
#8 150.7 Setting up libio-socket-ssl-perl (2.060-3) ...
#8 150.7 Setting up libortp-dev:amd64 (1:1.0.2-1) ...
#8 150.7 Setting up libhttp-message-perl (6.18-1) ...
#8 150.7 Setting up libfile-stripnondeterminism-perl (1.1.2-1) ...
#8 150.7 Setting up libhttp-negotiate-perl (6.01-1) ...
#8 150.8 Setting up libhttp-cookies-perl (6.04-1) ...
#8 150.8 Setting up po-debconf (1.0.21) ...
#8 150.8 Setting up libhtml-tree-perl (5.07-2) ...
#8 150.8 Setting up libparams-classify-perl (0.015-1+b1) ...
#8 150.8 Setting up libtalloc-dev:amd64 (2.1.14-2) ...
#8 150.8 Setting up libglib2.0-dev:amd64 (2.58.3-2+deb10u6) ...
#8 150.8 Setting up libmodule-runtime-perl (0.016-1) ...
#8 150.8 Setting up libsofia-sip-ua-glib-dev (1.12.11+20110422.1-2.1+deb10u4) ...
#8 150.8 Setting up libimport-into-perl (1.002005-1) ...
#8 150.8 Setting up libmoo-perl (2.003004-2) ...
#8 150.9 Setting up dh-autoreconf (19) ...
#8 150.9 Setting up liblwp-protocol-https-perl (6.07-2) ...
#8 150.9 Setting up libwww-perl (6.36-2) ...
#8 150.9 Setting up debhelper (12.1.1) ...
#8 150.9 Setting up devscripts (2.19.5+deb10u1) ...
#8 151.0 Setting up git-buildpackage (0.9.14) ...
#8 151.2 Setting up dh-strip-nondeterminism (1.1.2-1) ...
#8 151.2 Setting up equivs (2.2.0) ...
#8 151.2 Setting up dh-systemd (12.1.1) ...
#8 151.2 Setting up dahdi-source (1:2.11.1.0.20170917~dfsg-7) ...
#8 151.2 Processing triggers for libc-bin (2.28-10+deb10u4) ...
#8 151.3 Processing triggers for ca-certificates (20200601~deb10u2) ...
#8 151.3 Updating certificates in /etc/ssl/certs...
#8 151.6 0 added, 0 removed; done.
#8 151.6 Running hooks in /etc/ca-certificates/update.d...
#8 151.6 done.
#8 DONE 151.7s
#9 [3/6] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh
#9 DONE 0.0s
#10 [4/6] COPY .COMMON/RELEASE.KEY /tmp/Release.key
#10 DONE 0.0s
#11 [5/6] RUN APT-KEY add /tmp/Release.key && rm /tmp/Release.key &&
echo "deb "
https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10/
" ./" > /etc/apt/sources.list.d/osmocom-nightly.list
#11 0.367 Warning: apt-key output should not be parsed (stdout is not a terminal)
#11 1.819 OK
#11 DONE 1.9s
#12 [6/6] ADD
HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_10//RELEASE
/tmp/Release
#12 DONE 0.1s
#13 exporting to image
#13 exporting layers
#13 exporting layers 9.8s done
#13 writing image sha256:179247510d7950fbefea86af9c8a32597ddd052dc971a26b53b2a7a37d84980f
done
#13 naming to docker.io/osmocom-build/debian-buster-build:latest done
#13 DONE 9.8s
rm -rf .common
make: Leaving directory
'<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/debian-buster-build'>
+ docker_image_exists debian-buster-build
+ docker images -q osmocom-build/debian-buster-build
+ test -n 179247510d79
+ list_osmo_packages debian-buster debian-buster-build
+ local distro=debian-buster
+ local image=debian-buster-build
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh
osmocom-build/debian-buster-build -c
+ [ -n ]
+ return
+ [
registry.osmocom.org =
registry.osmocom.org ]
+ docker_depends osmo-stp-latest
+ local feed
+ echo debian-bookworm-obs-latest
+ depends=debian-bookworm-obs-latest
+ [ -n debian-bookworm-obs-latest ]
+ docker_images_require debian-bookworm-obs-latest
+ local i
+ local from_line
+ local pull_arg
+ local upstream_distro_arg
+ local distro_arg
+ local depends
+ local dir
+ [
registry.osmocom.org =
registry.osmocom.org ]
+ docker_depends debian-bookworm-obs-latest
+ local feed
+ depends=
+ [ -n ]
+ docker_distro_from_image_name debian-bookworm-obs-latest
+ echo debian-bookworm
+ distro_arg=debian-bookworm
+ [ -z ]
+ docker_upstream_distro_from_image_name debian-bookworm-obs-latest
+ echo debian:bookworm
+ upstream_distro_arg=debian:bookworm
+ docker_dir_from_image_name debian-bookworm-obs-latest
+ echo debian-bookworm-obs-latest
+ dir=debian-bookworm-obs-latest
+ pull_arg=--pull
+ grep ^FROM ../debian-bookworm-obs-latest/Dockerfile
+ from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO}
+ + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO}
grep -q $USER
+ set +x
Building image: debian-bookworm-obs-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent
this)
+ docker_osmo_ttcn3_branch
+ [ -n ]
+ echo master
+ make -C ../debian-bookworm-obs-latest BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm
DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-obs-latest
OSMO_TTCN3_BRANCH=master
make: Entering directory
'<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/debian-bookworm-obs-latest'>
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
rm -rf .common
cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/common>
.common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg
REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bookworm \
--build-arg DISTRO=debian-bookworm \
--build-arg
OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg
OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg ASTERISK_BRANCH=jolly/work \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_DIA2GSUP_BRANCH=master \
--build-arg OSMO_EPDG_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
--build-arg PJPROJECT_BRANCH=jolly/work \
--pull -t osmocom-build/debian-bookworm-obs-latest:latest .
#0 building with "default" instance using docker driver
#1 [internal] load .dockerignore
#1 transferring context: 2B done
#1 DONE 0.0s
#2 [internal] load build definition from Dockerfile
#2 transferring dockerfile: 1.35kB 0.0s done
#2 DONE 0.0s
#3 [internal] load metadata for
registry.osmocom.org/debian:bookworm
#3 DONE 0.0s
#4 [1/6] FROM
registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12…
#4 resolve
registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12…
0.0s done
#4 DONE 0.0s
#5 [internal] load build context
#5 transferring context: 1.96kB done
#5 DONE 0.0s
#6 [auth] sharing credentials for
registry.osmocom.org
#6 DONE 0.0s
#7
https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12//Release
#7 ERROR: Get
"https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12//Release":
dial tcp [2a01:4f8:201:344a::2]:443: i/o timeout
------
------
ERROR: failed to solve: DeadlineExceeded: failed to load cache key: Get
"https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12//Release":
dial tcp [2a01:4f8:201:344a::2]:443: i/o timeout
make: *** [../make/Makefile:94: docker-build] Error 1
make: Leaving directory
'<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/debian-bookworm-obs-latest'>
+ exit 1
Build step 'Execute shell' marked build as failure
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found.
Configuration error?