Build failed in Jenkins: osmo-gsm-tester_virtual #7706

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/7706/display/redirect> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/> The recommended git tool is: NONE No credentials specified Fetching changes from the remote Git repository Fetching upstream changes from https://gerrit.osmocom.org/osmo-gsm-tester Checking out Revision bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 (origin/master) Commit message: "Update git URLs" [osmo-gsm-tester_virtual] $ /bin/sh -xe /tmp/jenkins5922380332951999410.sh + rm -rf open5gs.build-8.tgz osmo-bsc.build-22752.tgz osmo-bts-oc2g.build-7998.tgz osmo-bts-sysmo.build-10500.tgz osmo-bts.build-9976.tgz osmo-ggsn.build-8974.tgz osmo-hlr.build-11734.tgz osmo-hnbgw.build-9563.tgz osmo-mgw.build-12037.tgz osmo-msc.build-36888.tgz osmo-nitb.build-17152.tgz osmo-pcu-oc2g.build-5400.tgz osmo-pcu-sysmo.build-6681.tgz osmo-pcu.build-6644.tgz osmo-sgsn.build-38553.tgz osmo-stp.build-12319.tgz osmo-trx.build-6950.tgz osmocom-bb.build-6481.tgz srslte.build-19.tgz open5gs.build-8.md5 osmo-bsc.build-22752.md5 osmo-bts-oc2g.build-7998.md5 osmo-bts-sysmo.build-10500.md5 osmo-bts.build-9976.md5 osmo-ggsn.build-8974.md5 osmo-hlr.build-11734.md5 osmo-hnbgw.build-9563.md5 osmo-mgw.build-12037.md5 osmo-msc.build-36888.md5 osmo-nitb.build-17152.md5 osmo-pcu-oc2g.build-5400.md5 osmo-pcu-sysmo.build-6681.md5 osmo-pcu.build-6644.md5 osmo-sgsn.build-38553.md5 osmo-stp.build-12319.md5 osmo-trx.build-6950.md5 osmocom-bb.build-6481.md5 srslte.build-19.md5 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bsc" build number 22760 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts" build number 9979 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-ggsn" build number 8977 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-hlr" build number 11738 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-mgw" build number 12041 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-hnbgw" build number 9574 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-msc" build number 36899 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu" build number 6646 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-sgsn" build number 38567 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-trx" build number 6953 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-nitb" build number 17155 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-stp" build number 12324 Copied 2 artifacts from "osmo-gsm-tester_build-osmocom-bb" build number 6483 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts-sysmo" build number 10503 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu-sysmo" build number 6683 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts-oc2g" build number 8001 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu-oc2g" build number 5402 Copied 2 artifacts from "osmo-gsm-tester_build-open5gs" build number 8 Copied 2 artifacts from "osmo-gsm-tester_build-srslte" build number 19 Copied 2 artifacts from "osmo-gsm-tester_build-osmocom-bb" build number 6483 [osmo-gsm-tester_virtual] $ /bin/sh -xe /tmp/jenkins13403474571637922488.sh + trap clean_up_trap EXIT INT TERM 0 + clean_up + docker kill osmo-gsm-tester-virtual Error response from daemon: Cannot kill container: osmo-gsm-tester-virtual: No such container: osmo-gsm-tester-virtual + true + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/>:/workspace debian:bullseye chmod -R a+rwX /workspace/ + rm -rf trial-* + rm -rf docker-playground + git clone --depth=1 --branch=master https://gerrit.osmocom.org/docker-playground docker-playground Cloning into 'docker-playground'... + git -C docker-playground log --oneline e4544a5 Remove ttcn3 testsuites ported to testenv, part 1 + make -C docker-playground/debian-buster-jenkins make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/docker-playground/debian-buster-jenkins'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/docker-playground/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-buster \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t docker.io/osmocom-build/debian-buster-jenkins:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 5.89kB done #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for docker.io/library/debian:buster #3 DONE 1.1s #4 [ 1/23] FROM docker.io/library/debian:buster@sha256:58ce6f1271ae1c8a2006ff7d3e54e9874d839f573d8009c20154ad0f2fb0a225 #4 DONE 0.0s #5 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #5 CACHED #6 [ 4/23] RUN pip3 install 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' 'swig' #6 CACHED #7 [ 2/23] RUN [ "$(arch)" = "x86_64" ] && dpkg --add-architecture i386; DEBIAN_FRONTEND=noninteractive apt-get update && DEBIAN_FRONTEND=noninteractive apt-get upgrade -y && DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive automake bc bison bzip2 ca-certificates ccache cmake coccinelle cppcheck dahdi-source dblatex dbus debhelper devscripts dh-autoreconf dh-systemd docbook5-xml doxygen flex g++ gawk gcc gcc-arm-none-eabi ghostscript git git-buildpackage graphviz htop inkscape latexmk lcov libaio-dev libasound2-dev libboost-all-dev libc-ares-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client osc patchelf pkg-config pylint python-pip python-setuptools python-yaml python2.7 python3 python3-cryptography python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo systemd tcpdump tex-gyre texinfo unzip wget xsltproc #7 CACHED #8 [ 3/23] RUN SET -x && [ "$(arch)" = "x86_64" ] || exit 0; wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #8 CACHED #9 [ 5/23] ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt #9 CACHED #10 [internal] load build context #10 transferring context: 1.50kB done #10 DONE 0.0s #11 http://git.osmocom.org/osmo-gsm-manuals/patch #11 DONE 0.1s #12 [ 6/23] RUN pip3 install -r /tmp/pysim_requirements.txt #12 ... #11 http://git.osmocom.org/osmo-gsm-manuals/patch #11 DONE 0.1s #13 http://git.osmocom.org/python/osmo-python-tests/patch #13 DONE 0.1s #14 http://git.osmocom.org/python/osmo-python-tests/patch/?id=fb4b813d4df62b7b2… #14 DONE 0.2s #15 http://git.osmocom.org/osmo-ci/patch #15 DONE 0.2s #16 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10//Release #16 DONE 0.2s #12 [ 6/23] RUN pip3 install -r /tmp/pysim_requirements.txt #12 1.029 Collecting git+https://github.com/osmocom/asn1tools (from -r /tmp/pysim_requirements.txt (line 14)) #12 1.029 Cloning https://github.com/osmocom/asn1tools to /tmp/pip-req-build-9j5ex5aq #12 2.249 Collecting git+https://github.com/hologram-io/smpp.pdu (from -r /tmp/pysim_requirements.txt (line 16)) #12 2.250 Cloning https://github.com/hologram-io/smpp.pdu to /tmp/pip-req-build-j2usfb_8 #12 2.831 Collecting pyscard (from -r /tmp/pysim_requirements.txt (line 1)) #12 2.945 Downloading https://files.pythonhosted.org/packages/58/90/e0c09842070fe0e4e6eaf9164d399… (153kB) #12 3.006 Installing build dependencies: started #12 5.050 Installing build dependencies: finished with status 'done' #12 5.273 Collecting pyserial (from -r /tmp/pysim_requirements.txt (line 2)) #12 5.297 Downloading https://files.pythonhosted.org/packages/07/bc/587a445451b253b285629263eb51c… (90kB) #12 5.330 Collecting pytlv (from -r /tmp/pysim_requirements.txt (line 3)) #12 5.441 Downloading https://files.pythonhosted.org/packages/bf/fb/05cb227d725bae7fce250c5b47064… #12 5.623 Collecting cmd2>=1.5 (from -r /tmp/pysim_requirements.txt (line 4)) #12 5.706 Downloading https://files.pythonhosted.org/packages/f3/9a/495a0577cbae4a11dc0b2a2174688… (147kB) #12 5.761 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) #12 5.784 Downloading https://files.pythonhosted.org/packages/16/0a/3b1ee3721b4bd684b0e29c724ab82… #12 5.815 Collecting construct>=2.9.51 (from -r /tmp/pysim_requirements.txt (line 6)) #12 5.860 Downloading https://files.pythonhosted.org/packages/b2/fb/08b3f4bf05da99aba8ffea52a5587… (63kB) #12 5.902 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) #12 5.937 Downloading https://files.pythonhosted.org/packages/b5/82/ce0b6380f35f49d3fe687979a324c… #12 5.986 Collecting pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) #12 6.087 Could not find a version that satisfies the requirement pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) (from versions: ) #12 6.144 No matching distribution found for pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) #12 ERROR: process "/bin/sh -c pip3 install -r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------ 5.706 Downloading https://files.pythonhosted.org/packages/f3/9a/495a0577cbae4a11dc0b2a2174688… (147kB) 5.761 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) 5.784 Downloading https://files.pythonhosted.org/packages/16/0a/3b1ee3721b4bd684b0e29c724ab82… 5.815 Collecting construct>=2.9.51 (from -r /tmp/pysim_requirements.txt (line 6)) 5.860 Downloading https://files.pythonhosted.org/packages/b2/fb/08b3f4bf05da99aba8ffea52a5587… (63kB) 5.902 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) 5.937 Downloading https://files.pythonhosted.org/packages/b5/82/ce0b6380f35f49d3fe687979a324c… 5.986 Collecting pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) 6.087 Could not find a version that satisfies the requirement pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) (from versions: ) 6.144 No matching distribution found for pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) ------ Dockerfile:156 -------------------- 154 | 'swig' 155 | ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt 156 | >>> RUN pip3 install -r /tmp/pysim_requirements.txt 157 | 158 | # match the outside user -------------------- ERROR: failed to solve: process "/bin/sh -c pip3 install -r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/docker-playground/debian-buster-jenkins'> + clean_up_trap + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + docker kill osmo-gsm-tester-virtual Error response from daemon: Cannot kill container: osmo-gsm-tester-virtual: No such container: osmo-gsm-tester-virtual + true + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/>:/workspace debian:bullseye chmod -R a+rwX /workspace/ Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results No test report files were found. Configuration error? [Checks API] No suitable checks publisher found.