- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: ttcn3-ns-test #1471
by jenkins＠lists.osmocom.org 04 Apr '25

04 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/1471/display/redirect> Changes: ------------------------------------------ [...truncated 4.77 KiB...] + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + [ -z ] + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/debian-bookworm-bu…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 5.80kB done #1 DONE 0.0s #2 [auth] sharing credentials for registry.osmocom.org #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.0s #4 [internal] load .dockerignore #4 transferring context: 2B done #4 DONE 0.0s #5 [internal] load build context #5 DONE 0.0s #6 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #6 DONE 0.1s #7 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #7 DONE 0.1s #8 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #8 resolve registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #8 resolve registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… 0.1s done #8 DONE 0.1s #9 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #9 DONE 0.2s #10 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #10 DONE 0.3s #11 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #11 DONE 0.3s #5 [internal] load build context #5 transferring context: 1.96kB done #5 DONE 0.1s #12 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #12 CACHED #13 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #13 CACHED #14 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache clang-format cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc xxd && apt-get clean #14 CACHED #15 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #15 CACHED #16 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #16 CACHED #17 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #17 CACHED #7 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #7 CACHED #9 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #9 CACHED #10 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #10 CACHED #18 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #18 0.366 + cat /tmp/pysim_requirements.txt #18 0.367 pyscard #18 0.367 pyserial #18 0.367 pytlv #18 0.367 cmd2>=1.5 #18 0.367 jsonpath-ng #18 0.367 construct>=2.10.70 #18 0.367 bidict #18 0.367 pyosmocom>=0.0.8 #18 0.367 pyyaml>=5.1 #18 0.367 termcolor #18 0.367 colorlog #18 0.367 pycryptodomex #18 0.367 cryptography #18 0.367 git+https://github.com/osmocom/asn1tools #18 0.367 packaging #18 0.367 git+https://github.com/hologram-io/smpp.pdu #18 0.367 + pip3 install --break-system-packages git+https://github.com/eriwen/lcov-to-cobertura-xml.git git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar… git+https://github.com/podshumok/python-smpplib.git pydbus pysispm ruff sphinx sphinxcontrib-napoleon -r /tmp/pysim_requirements.txt #18 0.558 Collecting git+https://github.com/eriwen/lcov-to-cobertura-xml.git #18 0.559 Cloning https://github.com/eriwen/lcov-to-cobertura-xml.git to /tmp/pip-req-build-pkraswwy #18 0.568 Running command git clone --filter=blob:none --quiet https://github.com/eriwen/lcov-to-cobertura-xml.git /tmp/pip-req-build-pkraswwy #18 1.379 Resolved https://github.com/eriwen/lcov-to-cobertura-xml.git to commit 85f51dfd646fadf534ce2bd636befeec37148ff9 #18 1.393 Installing build dependencies: started #18 2.645 Installing build dependencies: finished with status 'done' #18 2.647 Getting requirements to build wheel: started #18 2.732 Getting requirements to build wheel: finished with status 'error' #18 2.735 error: subprocess-exited-with-error #18 2.735 #18 2.735 × Getting requirements to build wheel did not run successfully. #18 2.735 │ exit code: 1 #18 2.735 ╰─> [28 lines of output] #18 2.735 Traceback (most recent call last): #18 2.735 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 353, in <module> #18 2.735 main() #18 2.735 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 335, in main #18 2.735 json_out['return_val'] = hook(**hook_input['kwargs']) #18 2.735 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 2.735 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 118, in get_requires_for_build_wheel #18 2.735 return hook(config_settings) #18 2.735 ^^^^^^^^^^^^^^^^^^^^^ #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 334, in get_requires_for_build_wheel #18 2.735 return self._get_build_requires(config_settings, requirements=[]) #18 2.735 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 304, in _get_build_requires #18 2.735 self.run_setup() #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 320, in run_setup #18 2.735 exec(code, locals()) #18 2.735 File "<string>", line 3, in <module> #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/__init__.py", line 116, in setup #18 2.735 _install_setup_requires(attrs) #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/__init__.py", line 87, in _install_setup_requires #18 2.735 dist.parse_config_files(ignore_option_errors=True) #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/dist.py", line 759, in parse_config_files #18 2.735 self._finalize_license_expression() #18 2.735 File "/tmp/pip-build-env-t8ibfn6k/overlay/local/lib/python3.11/dist-packages/setuptools/dist.py", line 432, in _finalize_license_expression #18 2.735 raise InvalidConfigError( #18 2.735 setuptools.errors.InvalidConfigError: License classifiers have been superseded by license expressions (see https://peps.python.org/pep-0639/). Please remove: #18 2.735 #18 2.735 License :: OSI Approved :: Apache Software License #18 2.735 [end of output] #18 2.735 #18 2.735 note: This error originates from a subprocess, and is likely not a problem with pip. #18 2.735 error: subprocess-exited-with-error #18 2.735 #18 2.735 × Getting requirements to build wheel did not run successfully. #18 2.735 │ exit code: 1 #18 2.735 ╰─> See above for output. #18 2.735 #18 2.735 note: This error originates from a subprocess, and is likely not a problem with pip. #18 ERROR: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'pydbus' \t\t'pysispm' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------ > [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt: 2.735 [end of output] 2.735 2.735 note: This error originates from a subprocess, and is likely not a problem with pip. 2.735 error: subprocess-exited-with-error 2.735 2.735 × Getting requirements to build wheel did not run successfully. 2.735 │ exit code: 1 2.735 ╰─> See above for output. 2.735 2.735 note: This error originates from a subprocess, and is likely not a problem with pip. ------ Dockerfile:177 -------------------- 176 | ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt 177 | >>> RUN set -x && \ 178 | >>> cat /tmp/pysim_requirements.txt && \ 179 | >>> pip3 install --break-system-packages \ 180 | >>> 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \ 181 | >>> 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \ 182 | >>> 'git+https://github.com/podshumok/python-smpplib.git' \ 183 | >>> 'pydbus' \ 184 | >>> 'pysispm' \ 185 | >>> 'ruff' \ 186 | >>> 'sphinx' \ 187 | >>> 'sphinxcontrib-napoleon' \ 188 | >>> -r /tmp/pysim_requirements.txt 189 | -------------------- ERROR: failed to solve: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'pydbus' \t\t'pysispm' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:95: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/debian-bookworm-bu…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: nplab-m3ua-test #2842
by jenkins＠lists.osmocom.org 04 Apr '25

04 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/2842/display/redire…> Changes: ------------------------------------------ [...truncated 169.37 KiB...] + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + [ -z ] + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/debian-bookworm-…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 5.80kB done #1 DONE 0.1s #2 [auth] sharing credentials for registry.osmocom.org #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.1s #4 [internal] load .dockerignore #4 transferring context: 2B done #4 DONE 0.1s #5 [internal] load build context #5 DONE 0.0s #6 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #6 DONE 0.1s #7 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #7 resolve registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #7 ... #8 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #8 DONE 0.2s #7 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #7 resolve registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… 0.3s done #7 DONE 0.3s #9 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #9 DONE 0.3s #10 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #10 DONE 0.6s #11 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #11 DONE 0.7s #6 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #6 CACHED #5 [internal] load build context #5 transferring context: 1.96kB done #5 DONE 0.1s #12 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #12 CACHED #13 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #13 CACHED #14 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #14 CACHED #15 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache clang-format cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc xxd && apt-get clean #15 CACHED #16 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #16 CACHED #17 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #17 CACHED #10 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #10 CACHED #11 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #11 CACHED #9 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #9 CACHED #18 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #18 0.571 + cat /tmp/pysim_requirements.txt #18 0.571 pyscard #18 0.571 pyserial #18 0.571 pytlv #18 0.571 cmd2>=1.5 #18 0.571 jsonpath-ng #18 0.571 construct>=2.10.70 #18 0.571 bidict #18 0.571 pyosmocom>=0.0.8 #18 0.571 pyyaml>=5.1 #18 0.571 termcolor #18 0.571 colorlog #18 0.571 pycryptodomex #18 0.571 cryptography #18 0.571 git+https://github.com/osmocom/asn1tools #18 0.571 packaging #18 0.571 git+https://github.com/hologram-io/smpp.pdu #18 0.571 + pip3 install --break-system-packages git+https://github.com/eriwen/lcov-to-cobertura-xml.git git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar… git+https://github.com/podshumok/python-smpplib.git pydbus pysispm ruff sphinx sphinxcontrib-napoleon -r /tmp/pysim_requirements.txt #18 0.783 Collecting git+https://github.com/eriwen/lcov-to-cobertura-xml.git #18 0.783 Cloning https://github.com/eriwen/lcov-to-cobertura-xml.git to /tmp/pip-req-build-34d05ak1 #18 0.784 Running command git clone --filter=blob:none --quiet https://github.com/eriwen/lcov-to-cobertura-xml.git /tmp/pip-req-build-34d05ak1 #18 1.604 Resolved https://github.com/eriwen/lcov-to-cobertura-xml.git to commit 85f51dfd646fadf534ce2bd636befeec37148ff9 #18 1.606 Installing build dependencies: started #18 3.078 Installing build dependencies: finished with status 'done' #18 3.079 Getting requirements to build wheel: started #18 3.205 Getting requirements to build wheel: finished with status 'error' #18 3.210 error: subprocess-exited-with-error #18 3.210 #18 3.210 × Getting requirements to build wheel did not run successfully. #18 3.210 │ exit code: 1 #18 3.210 ╰─> [28 lines of output] #18 3.210 Traceback (most recent call last): #18 3.210 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 353, in <module> #18 3.210 main() #18 3.210 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 335, in main #18 3.210 json_out['return_val'] = hook(**hook_input['kwargs']) #18 3.210 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 3.210 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 118, in get_requires_for_build_wheel #18 3.210 return hook(config_settings) #18 3.210 ^^^^^^^^^^^^^^^^^^^^^ #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 334, in get_requires_for_build_wheel #18 3.210 return self._get_build_requires(config_settings, requirements=[]) #18 3.210 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 304, in _get_build_requires #18 3.210 self.run_setup() #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 320, in run_setup #18 3.210 exec(code, locals()) #18 3.210 File "<string>", line 3, in <module> #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/__init__.py", line 116, in setup #18 3.210 _install_setup_requires(attrs) #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/__init__.py", line 87, in _install_setup_requires #18 3.210 dist.parse_config_files(ignore_option_errors=True) #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/dist.py", line 759, in parse_config_files #18 3.210 self._finalize_license_expression() #18 3.210 File "/tmp/pip-build-env-0vgy1p2y/overlay/local/lib/python3.11/dist-packages/setuptools/dist.py", line 432, in _finalize_license_expression #18 3.210 raise InvalidConfigError( #18 3.210 setuptools.errors.InvalidConfigError: License classifiers have been superseded by license expressions (see https://peps.python.org/pep-0639/). Please remove: #18 3.210 #18 3.210 License :: OSI Approved :: Apache Software License #18 3.210 [end of output] #18 3.210 #18 3.210 note: This error originates from a subprocess, and is likely not a problem with pip. #18 3.211 error: subprocess-exited-with-error #18 3.211 #18 3.211 × Getting requirements to build wheel did not run successfully. #18 3.211 │ exit code: 1 #18 3.211 ╰─> See above for output. #18 3.211 #18 3.211 note: This error originates from a subprocess, and is likely not a problem with pip. #18 ERROR: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'pydbus' \t\t'pysispm' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------ > [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt: 3.210 [end of output] 3.210 3.210 note: This error originates from a subprocess, and is likely not a problem with pip. 3.211 error: subprocess-exited-with-error 3.211 3.211 × Getting requirements to build wheel did not run successfully. 3.211 │ exit code: 1 3.211 ╰─> See above for output. 3.211 3.211 note: This error originates from a subprocess, and is likely not a problem with pip. ------ Dockerfile:177 -------------------- 176 | ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt 177 | >>> RUN set -x && \ 178 | >>> cat /tmp/pysim_requirements.txt && \ 179 | >>> pip3 install --break-system-packages \ 180 | >>> 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \ 181 | >>> 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \ 182 | >>> 'git+https://github.com/podshumok/python-smpplib.git' \ 183 | >>> 'pydbus' \ 184 | >>> 'pysispm' \ 185 | >>> 'ruff' \ 186 | >>> 'sphinx' \ 187 | >>> 'sphinxcontrib-napoleon' \ 188 | >>> -r /tmp/pysim_requirements.txt 189 | -------------------- ERROR: failed to solve: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'pydbus' \t\t'pysispm' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:95: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/debian-bookworm-…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: nplab-sua-test #2809
by jenkins＠lists.osmocom.org 04 Apr '25

04 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/2809/display/redirect> Changes: ------------------------------------------ [...truncated 131.69 KiB...] + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/debian-bookworm-b…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: #1 transferring dockerfile: 5.80kB done #1 DONE 0.3s #2 [auth] sharing credentials for registry.osmocom.org #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.1s #4 [internal] load .dockerignore #4 transferring context: #4 transferring context: 2B done #4 DONE 0.6s #5 [internal] load build context #5 DONE 0.0s #6 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #6 resolve registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #6 ... #7 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #7 DONE 0.4s #8 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #8 ... #6 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… #6 resolve registry.osmocom.org/debian:bookworm@sha256:30c92cee105dd5e0b358aad92c408f3… 0.5s done #6 DONE 0.5s #9 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #9 DONE 1.2s #10 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #10 DONE 1.3s #8 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #8 DONE 1.3s #11 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #11 DONE 1.6s #5 [internal] load build context #5 ... #11 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #11 DONE 1.8s #5 [internal] load build context #5 transferring context: 1.96kB done #5 DONE 0.4s #12 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #12 CACHED #13 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #13 CACHED #14 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #14 CACHED #15 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache clang-format cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc xxd && apt-get clean #15 CACHED #16 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #16 CACHED #17 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #17 CACHED #9 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #9 CACHED #10 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #10 CACHED #8 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #8 CACHED #18 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #18 0.788 + cat /tmp/pysim_requirements.txt #18 0.788 pyscard #18 0.788 pyserial #18 0.788 pytlv #18 0.788 cmd2>=1.5 #18 0.788 jsonpath-ng #18 0.788 construct>=2.10.70 #18 0.788 bidict #18 0.788 pyosmocom>=0.0.8 #18 0.788 pyyaml>=5.1 #18 0.788 termcolor #18 0.788 colorlog #18 0.788 pycryptodomex #18 0.788 cryptography #18 0.788 git+https://github.com/osmocom/asn1tools #18 0.788 packaging #18 0.788 git+https://github.com/hologram-io/smpp.pdu #18 0.788 + pip3 install --break-system-packages git+https://github.com/eriwen/lcov-to-cobertura-xml.git git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar… git+https://github.com/podshumok/python-smpplib.git pydbus pysispm ruff sphinx sphinxcontrib-napoleon -r /tmp/pysim_requirements.txt #18 0.996 Collecting git+https://github.com/eriwen/lcov-to-cobertura-xml.git #18 0.996 Cloning https://github.com/eriwen/lcov-to-cobertura-xml.git to /tmp/pip-req-build-wfe5j9ud #18 0.997 Running command git clone --filter=blob:none --quiet https://github.com/eriwen/lcov-to-cobertura-xml.git /tmp/pip-req-build-wfe5j9ud #18 1.992 Resolved https://github.com/eriwen/lcov-to-cobertura-xml.git to commit 85f51dfd646fadf534ce2bd636befeec37148ff9 #18 1.994 Installing build dependencies: started #18 3.686 Installing build dependencies: finished with status 'done' #18 3.687 Getting requirements to build wheel: started #18 3.784 Getting requirements to build wheel: finished with status 'error' #18 3.786 error: subprocess-exited-with-error #18 3.786 #18 3.786 × Getting requirements to build wheel did not run successfully. #18 3.786 │ exit code: 1 #18 3.786 ╰─> [28 lines of output] #18 3.786 Traceback (most recent call last): #18 3.786 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 353, in <module> #18 3.786 main() #18 3.786 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 335, in main #18 3.786 json_out['return_val'] = hook(**hook_input['kwargs']) #18 3.786 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 3.786 File "/usr/lib/python3/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 118, in get_requires_for_build_wheel #18 3.786 return hook(config_settings) #18 3.786 ^^^^^^^^^^^^^^^^^^^^^ #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 334, in get_requires_for_build_wheel #18 3.786 return self._get_build_requires(config_settings, requirements=[]) #18 3.786 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 304, in _get_build_requires #18 3.786 self.run_setup() #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/build_meta.py", line 320, in run_setup #18 3.786 exec(code, locals()) #18 3.786 File "<string>", line 3, in <module> #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/__init__.py", line 116, in setup #18 3.786 _install_setup_requires(attrs) #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/__init__.py", line 87, in _install_setup_requires #18 3.786 dist.parse_config_files(ignore_option_errors=True) #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/dist.py", line 759, in parse_config_files #18 3.786 self._finalize_license_expression() #18 3.786 File "/tmp/pip-build-env-n13t0d6o/overlay/local/lib/python3.11/dist-packages/setuptools/dist.py", line 432, in _finalize_license_expression #18 3.786 raise InvalidConfigError( #18 3.786 setuptools.errors.InvalidConfigError: License classifiers have been superseded by license expressions (see https://peps.python.org/pep-0639/). Please remove: #18 3.786 #18 3.786 License :: OSI Approved :: Apache Software License #18 3.786 [end of output] #18 3.786 #18 3.786 note: This error originates from a subprocess, and is likely not a problem with pip. #18 3.787 error: subprocess-exited-with-error #18 3.787 #18 3.787 × Getting requirements to build wheel did not run successfully. #18 3.787 │ exit code: 1 #18 3.787 ╰─> See above for output. #18 3.787 #18 3.787 note: This error originates from a subprocess, and is likely not a problem with pip. #18 ERROR: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'pydbus' \t\t'pysispm' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------ > [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt: 3.786 [end of output] 3.786 3.786 note: This error originates from a subprocess, and is likely not a problem with pip. 3.787 error: subprocess-exited-with-error 3.787 3.787 × Getting requirements to build wheel did not run successfully. 3.787 │ exit code: 1 3.787 ╰─> See above for output. 3.787 3.787 note: This error originates from a subprocess, and is likely not a problem with pip. ------ Dockerfile:177 -------------------- 176 | ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt 177 | >>> RUN set -x && \ 178 | >>> cat /tmp/pysim_requirements.txt && \ 179 | >>> pip3 install --break-system-packages \ 180 | >>> 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \ 181 | >>> 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \ 182 | >>> 'git+https://github.com/podshumok/python-smpplib.git' \ 183 | >>> 'pydbus' \ 184 | >>> 'pysispm' \ 185 | >>> 'ruff' \ 186 | >>> 'sphinx' \ 187 | >>> 'sphinxcontrib-napoleon' \ 188 | >>> -r /tmp/pysim_requirements.txt 189 | -------------------- ERROR: failed to solve: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-ar…' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'pydbus' \t\t'pysispm' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:95: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/debian-bookworm-b…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: Osmocom_OBS_check_builders #21371
by jenkins＠lists.osmocom.org 04 Apr '25

04 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_check_builders/21371/di…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_check_builders/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_check_builders/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 9a18ebaa78fc255a0aea42186a2743829d69162e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 Commit message: "obs: gerrit_binpkgs: set --allow-unknown-package" > git rev-list --no-walk 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 [Osmocom_OBS_check_builders] $ /bin/sh -xe /tmp/jenkins2222615642791519796.sh + scripts/obs/check_builders.sh + min=10 + max=500 + wget -q https://obs.osmocom.org -O index.html Build step 'Execute shell' marked build as failure

1 9

Build failed in Jenkins: Osmocom_OBS_master #93645
by jenkins＠lists.osmocom.org 04 Apr '25

04 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/93645/display/re…> Changes: ------------------------------------------ Started by upstream project "master-libosmo-netif" build number 9925 originally caused by: Started by timer Running as SYSTEM Building remotely on build5-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3-ggsn-test-kernel-git ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 9a18ebaa78fc255a0aea42186a2743829d69162e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 Commit message: "obs: gerrit_binpkgs: set --allow-unknown-package" > git rev-list --no-walk 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 [Osmocom_OBS_master] $ /bin/sh -xe /tmp/jenkins8542952165556061840.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version --docker --feed master --meta osmocom:master docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 579B done #1 WARN: InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) #1 DONE 0.1s #2 [internal] load metadata for docker.io/library/debian:12 #2 DONE 1.2s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.1s #4 [1/3] FROM docker.io/library/debian:12@sha256:18023f131f52fc3ea21973cabffe0b216c60b417fd2478e94d9d59981ebba6af #4 resolve docker.io/library/debian:12@sha256:18023f131f52fc3ea21973cabffe0b216c60b417fd2478e94d9d59981ebba6af 0.0s done #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed sphinx-common && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:bc6a5998c69e89ffa8b1575b367bf8e7e099cfb23989f67da73b87732b6acf83 done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg done #7 DONE 0.0s [33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:master ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://obs.osmocom.org', 'list', 'osmocom:master'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 504: Gateway Time-out Request: https://obs.osmocom.org/source/osmocom:master Headers: Server: nginx Date: Thu, 03 Apr 2025 16:10:54 GMT Content-Type: text/html Content-Length: 160 Connection: close *** python trace *** Traceback (most recent call last): File "/obs/update_obs_project.py", line 265, in <module> main() File "/obs/update_obs_project.py", line 257, in main pkgs_remote = lib.osc.get_remote_pkgs() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 63, in get_remote_pkgs ret = run_osc(["list", proj]) ^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 30

Build failed in Jenkins: Osmocom_OBS_latest #765
by jenkins＠lists.osmocom.org 03 Apr '25

03 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/765/display/redi…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 9a18ebaa78fc255a0aea42186a2743829d69162e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 Commit message: "obs: gerrit_binpkgs: set --allow-unknown-package" > git rev-list --no-walk 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 [Osmocom_OBS_latest] $ /bin/sh -xe /tmp/jenkins13285424660500467453.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version --docker --feed latest --meta osmocom:latest docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/scripts/obs/d…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest/ws/scripts/obs/d…']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 579B done #1 WARN: InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) #1 DONE 0.0s #2 [internal] load metadata for docker.io/library/debian:12 #2 DONE 0.8s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/3] FROM docker.io/library/debian:12@sha256:18023f131f52fc3ea21973cabffe0b216c60b417fd2478e94d9d59981ebba6af #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed sphinx-common && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:2a9dd95b35028e4d71315e59c45ba43dc43f920d55d8b4980b221443515a5cd4 0.0s done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg done #7 DONE 0.0s [33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:latest Traceback (most recent call last): File "/obs/update_obs_project.py", line 265, in <module> main() File "/obs/update_obs_project.py", line 257, in main ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://obs.osmocom.org', 'list', 'osmocom:latest'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 503: Service Unavailable Request: https://obs.osmocom.org/source/osmocom:latest Headers: Server: nginx Date: Thu, 03 Apr 2025 20:54:02 GMT Content-Type: text/html; charset=UTF-8 Content-Length: 189 Connection: close cache-control: no-cache, no-store, must-revalidate Status: 503 Service Unavailable Cache-Control: public *** python trace *** pkgs_remote = lib.osc.get_remote_pkgs() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 63, in get_remote_pkgs ret = run_osc(["list", proj]) ^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 0

Build failed in Jenkins: Osmocom_OBS_nightly #732
by jenkins＠lists.osmocom.org 03 Apr '25

03 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/732/display/red…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 9a18ebaa78fc255a0aea42186a2743829d69162e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 Commit message: "obs: gerrit_binpkgs: set --allow-unknown-package" > git rev-list --no-walk 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 [Osmocom_OBS_nightly] $ /bin/sh -xe /tmp/jenkins7651622285191989966.sh + export PYTHONUNBUFFERED=1 + date +%Y%m%d%H%M + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version 202504032026 --docker --feed nightly --meta osmocom:nightly docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/scripts/obs/…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/scripts/obs/…']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 579B done #1 WARN: InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) #1 DONE 0.0s #2 [internal] load metadata for docker.io/library/debian:12 #2 DONE 0.8s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/3] FROM docker.io/library/debian:12@sha256:18023f131f52fc3ea21973cabffe0b216c60b417fd2478e94d9d59981ebba6af #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed sphinx-common && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:2a9dd95b35028e4d71315e59c45ba43dc43f920d55d8b4980b221443515a5cd4 done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg 0.0s done #7 DONE 0.0s [33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:nightly Traceback (most recent call last): File "/obs/update_obs_project.py", line 265, in <module> main() File "/obs/update_obs_project.py", line 257, in main pkgs_remote = lib.osc.get_remote_pkgs() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 63, in get_remote_pkgs ret = run_osc(["list", proj]) ^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://obs.osmocom.org', 'list', 'osmocom:nightly'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 503: Service Unavailable Request: https://obs.osmocom.org/source/osmocom:nightly Headers: Server: nginx Date: Thu, 03 Apr 2025 20:26:03 GMT Content-Type: text/html; charset=UTF-8 Content-Length: 189 Connection: close cache-control: no-cache, no-store, must-revalidate Status: 503 Service Unavailable Cache-Control: public *** python trace *** exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 0

Build failed in Jenkins: Osmocom_OBS_check_builders #21367
by jenkins＠lists.osmocom.org 03 Apr '25

03 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_check_builders/21367/di…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_check_builders/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_check_builders/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 9a18ebaa78fc255a0aea42186a2743829d69162e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 Commit message: "obs: gerrit_binpkgs: set --allow-unknown-package" > git rev-list --no-walk 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 [Osmocom_OBS_check_builders] $ /bin/sh -xe /tmp/jenkins16932971514263744120.sh + scripts/obs/check_builders.sh + min=10 + max=500 + wget -q https://obs.osmocom.org -O index.html Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom_OBS_master #93628
by jenkins＠lists.osmocom.org 03 Apr '25

03 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/93628/display/re…> Changes: ------------------------------------------ Started by upstream project "master-gapk" build number 2506 originally caused by: Started by timer Running as SYSTEM Building remotely on build5-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3-ggsn-test-kernel-git ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 9a18ebaa78fc255a0aea42186a2743829d69162e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 Commit message: "obs: gerrit_binpkgs: set --allow-unknown-package" > git rev-list --no-walk 9a18ebaa78fc255a0aea42186a2743829d69162e # timeout=10 [Osmocom_OBS_master] $ /bin/sh -xe /tmp/jenkins8999226499608592414.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version --docker --feed master --meta osmocom:master docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 579B done #1 WARN: InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) #1 DONE 0.1s #2 [internal] load metadata for docker.io/library/debian:12 #2 DONE 1.2s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.1s #4 [1/3] FROM docker.io/library/debian:12@sha256:18023f131f52fc3ea21973cabffe0b216c60b417fd2478e94d9d59981ebba6af #4 resolve docker.io/library/debian:12@sha256:18023f131f52fc3ea21973cabffe0b216c60b417fd2478e94d9d59981ebba6af 0.0s done #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed sphinx-common && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:bc6a5998c69e89ffa8b1575b367bf8e7e099cfb23989f67da73b87732b6acf83 done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg done #7 DONE 0.0s [33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG ${DISTRO_FROM} results in empty or invalid base image name (line 3) docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:master Traceback (most recent call last): File "/obs/update_obs_project.py", line 265, in <module> ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://obs.osmocom.org', 'list', 'osmocom:master'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 504: Gateway Time-out Request: https://obs.osmocom.org/source/osmocom:master Headers: Server: nginx Date: Thu, 03 Apr 2025 12:31:47 GMT Content-Type: text/html Content-Length: 160 Connection: close *** python trace *** main() File "/obs/update_obs_project.py", line 257, in main pkgs_remote = lib.osc.get_remote_pkgs() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 63, in get_remote_pkgs ret = run_osc(["list", proj]) ^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 2

Jenkins build became unstable: ttcn3-pcu-test-sns-latest #2227
by jenkins＠lists.osmocom.org 03 Apr '25

03 Apr '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-sns-latest/2227/disp…>

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications