Build failed in Jenkins: Osmocom-release-tarballs #426

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/426/display/redirect> Changes: ------------------------------------------ [...truncated 5.09 KB...] --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --pull -t osmocom-build/debian-stretch-build:latest . Sending build context to Docker daemon 4.608kB Step 1/3 : FROM debian:stretch stretch: Pulling from library/debian Digest: sha256:335ecf9e8d9b2206c2e9e7f8b09547faa9f868e694f7c5be14c38be15ea8a7cf Status: Image is up to date for debian:stretch ---> 6d935b41319b Step 2/3 : MAINTAINER Harald Welte &lt;laforge(a)gnumonks.org&gt; ---> Using cache ---> bc8cc1dc8c4c Step 3/3 : RUN apt-get update && apt-get upgrade -y && apt-get install -y --no-install-recommends autoconf autoconf-archive autogen automake bison build-essential cppcheck dahdi-source debhelper devscripts dh-autoreconf dh-systemd doxygen flex g++ gawk gcc gcc-arm-none-eabi git git-buildpackage gnupg libc-ares-dev libdbd-sqlite3 libdbi-dev libfftw3-dev libgnutls28-dev libgps-dev libgsm1-dev libncurses5-dev libnewlib-arm-none-eabi libortp-dev libpcap-dev libpcsclite-dev libtalloc-dev libtool libreadline-dev libsctp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libusb-dev libusb-1.0-0-dev make pkg-config sqlite3 stow wget && apt-get clean ---> Using cache ---> 1bf3aa421c99 [Warning] One or more build-args [OSMO_HLR_BRANCH OSMO_MSC_BRANCH USER LIBOSMOCORE_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_STP_BRANCH OSMO_IUH_BRANCH OSMO_NITB_BRANCH OSMO_PCU_BRANCH OSMO_SGSN_BRANCH OSMO_SIP_BRANCH DISTRO OSMO_BTS_BRANCH OSMO_GGSN_BRANCH OSMO_MGW_BRANCH OSMO_TTCN3_BRANCH OSMO_BB_BRANCH OSMO_BSC_BRANCH] were not consumed Successfully built 1bf3aa421c99 Successfully tagged osmocom-build/debian-stretch-build:latest make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-build'> + docker_image_exists debian-stretch-build + docker images -q osmocom-build/debian-stretch-build + test -n 1bf3aa421c99 + docker_depends debian-stretch-build-dist + depends= + [ -n ] + [ -z ] + docker_distro_from_image_name debian-stretch-build-dist + echo debian-stretch + distro_arg=debian-stretch + docker_dir_from_image_name debian-stretch-build-dist + echo debian-stretch-build-dist + dir=debian-stretch-build-dist + pull_arg=--pull + grep ^FROM ../debian-stretch-build-dist/Dockerfile + from_line=FROM $USER/debian-stretch-build + echo FROM $USER/debian-stretch-build + grep -q $USER + pull_arg= + echo Building image: debian-stretch-build-dist (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-stretch-build-dist (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-stretch-build-dist PULL= DISTRO=debian-stretch IMAGE=osmocom-build/debian-stretch-build-dist make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-build-dist'> docker build \ --build-arg USER=osmocom-build \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg DISTRO=debian-stretch \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ -t osmocom-build/debian-stretch-build-dist:latest . Sending build context to Docker daemon 6.656kB Step 1/7 : ARG USER Step 2/7 : FROM $USER/debian-stretch-build ---> 1bf3aa421c99 Step 3/7 : ARG OSMOCOM_REPO="http://download.opensuse.org/repositories/network:/osmoc… ---> Using cache ---> 114d9ebba4df Step 4/7 : COPY Release.key /tmp/Release.key ---> Using cache ---> d69fb3ffb3e6 Step 5/7 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key && echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-latest.list ---> Using cache ---> c40a4ad2cf74 Step 6/7 : ADD $OSMOCOM_REPO/Release /tmp/Release ---> Using cache ---> 947fd7f151a1 Step 7/7 : RUN apt-get update && apt-get install -y --no-install-recommends ca-certificates libboost-all-dev liboping-dev libuhd-dev libasn1c-dev libgtp-dev libgtpnl-dev liblimesuite-dev liborcania-dev libosmo-abis-dev libosmocore-dev libosmodsp-dev libosmo-gsup-client-dev libosmo-mgcp-client-dev libosmo-netif-dev libosmo-ranap-dev libosmo-sccp-dev libosmo-sigtran-dev libsmpp34-dev libulfius-dev libusrp-dev libyder-dev && apt-get clean ---> Using cache ---> 82b9065c9d51 [Warning] One or more build-args [OSMO_MSC_BRANCH OSMO_STP_BRANCH OSMO_TTCN3_BRANCH OSMO_MGW_BRANCH LIBOSMOCORE_BRANCH OSMO_BTS_BRANCH OSMO_SGSN_BRANCH DISTRO OSMO_GSM_TESTER_BRANCH OSMO_HLR_BRANCH OSMO_IUH_BRANCH OSMO_NITB_BRANCH OSMO_PCU_BRANCH OSMO_SIP_BRANCH OSMO_BB_BRANCH OSMO_GGSN_BRANCH OSMO_BSC_BRANCH] were not consumed Successfully built 82b9065c9d51 Successfully tagged osmocom-build/debian-stretch-build-dist:latest make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/_docker_playground/debian-stretch-build-dist'> + docker_image_exists debian-stretch-build-dist + docker images -q osmocom-build/debian-stretch-build-dist + test -n 82b9065c9d51 + ret=0 + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/> + return 0 + docker run --rm=true -v <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/>:/osmo-ci -w /osmo-ci -e KEEP_TEMP= osmocom-build/debian-stretch-build-dist /osmo-ci/scripts/osmocom-release-tarballs.sh Temp dir: /osmo-ci/_temp libasn1c libasn1c-0.9.28.tar.bz2 (exists) libasn1c-0.9.29.tar.bz2 (exists) libasn1c-0.9.30.tar.bz2 (exists) libasn1c-0.9.31.tar.bz2 (exists) libasn1c-0.9.32.tar.bz2 (exists) libosmo-abis libosmo-abis-0.3.0.tar.bz2 (exists) libosmo-abis-0.3.2.tar.bz2 (exists) libosmo-abis-0.4.0.tar.bz2 (exists) libosmo-abis-0.5.0.tar.bz2 (exists) libosmo-abis-0.5.1.tar.bz2 (exists) libosmo-abis-0.6.0.tar.bz2 (exists) libosmo-abis-0.7.0.tar.bz2 (exists) libosmo-abis-0.8.0.tar.bz2 (exists) libosmo-abis-0.8.1.tar.bz2 (exists) libosmo-abis-1.0.0.tar.bz2 (creating) + prepare_repo libosmo-abis 1.0.0 + local repo=libosmo-abis + local tag=1.0.0 + [ -d /osmo-ci/_temp/repos/libosmo-abis ] + git -C /osmo-ci/_temp/repos clone https://git.osmocom.org/libosmo-abis Cloning into 'libosmo-abis'... + cd /osmo-ci/_temp/repos/libosmo-abis + git clean -qdxf + git reset --hard HEAD HEAD is now at 297a3be debian/control: change maintainer to the Osmocom team / mailing list + git checkout -q 1.0.0 + prepare_depends libosmo-abis + cd /osmo-ci/_temp/repos/libosmo-abis + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:20: installing './compile' configure.ac:22: installing './config.guess' configure.ac:22: installing './config.sub' configure.ac:8: installing './install-sh' configure.ac:8: installing './missing' src/Makefile.am: installing './depcomp' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking if gcc supports -fvisibility=hidden... yes checking for LIBOSMOCORE... no configure: error: Package requirements (libosmocore >= 1.4.0) were not met: Requested 'libosmocore >= 1.4.0' but version of Osmocom Core Library is 1.3.2 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 6856 killed; [ssh-agent] Stopped.