July 2024 - jenkins-notifications

Jenkins build became unstable: ttcn3-bsc-test #2557
by jenkins＠lists.osmocom.org 26 Jul '24

26 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test/2557/display/redirec…>

1 1

Build failed in Jenkins: Osmocom-repo-install-debian10 » latest,qemu #1304
by jenkins＠lists.osmocom.org 26 Jul '24

26 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian10/feed=…> Changes: ------------------------------------------ [...truncated 64.89 KB...] libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogb14 libosmogb-doc libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-latest osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym python3-bladerf python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym + apt-get install -y --no-install-recommends -- abisip-find bladerf bladerf-dbgsym bladerf-firmware-fx3 bladerf-fpga-hostedx115 bladerf-fpga-hostedx40 bladerf-fpga-hostedxa4 bladerf-fpga-hostedxa9 eclipse-titan eclipse-titan-dbgsym gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libbladerf2 libbladerf2-dbgsym libbladerf-dev libbladerf-doc libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogb14 libosmogb-doc libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-latest osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym python3-bladerf python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.3). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.3). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.3). libosmocore21 is already the newest version (1.9.3). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.3). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.3). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.3). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.3). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.3). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.3). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.3). libosmovty13 set to manually installed. osmocom-latest is already the newest version (1.0.0). osmocom-latest set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmocore-doc : Depends: libosmocore22 but it is not installable libusrp-doc : Depends: libusrp1 (= 3.4.9) but 3.4.8 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 1714860 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-build-tags-against-master #1990
by jenkins＠lists.osmocom.org 26 Jul '24

26 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/1…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/fixeria/fixes Seen branch in repository origin/laforge/dahdi-wip Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/obs Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/centos-install-test Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/fix-python3 Seen branch in repository origin/osmith/gerrit-lint Seen branch in repository origin/osmith/gerrit-mail-on-success Seen branch in repository origin/osmith/ggsn-kernel-mod-test Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/obs-check-builders Seen branch in repository origin/osmith/obs-fixes Seen branch in repository origin/osmith/obs-latest-fix Seen branch in repository origin/osmith/obs-mirror Seen branch in repository origin/osmith/obs-nftables Seen branch in repository origin/osmith/offline-nodes Seen branch in repository origin/osmith/rpm Seen branch in repository origin/osmith/ttcn3-centos Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/osmith/wip-ci-packaging Seen branch in repository origin/osmith/wip-docuum Seen branch in repository origin/osmith/wip-manuals Seen branch in repository origin/osmith/wip-obs Seen branch in repository origin/osmith/wip-obs-asan Seen branch in repository origin/osmith/wip-os-6165 Seen branch in repository origin/osmith/wip-repo-install-qemu Seen branch in repository origin/pespin/limesuite-latest Seen branch in repository origin/pespin/open5gs Seen 34 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 3633d1f62e9615549a7fd32056f6b544825019dd (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 3633d1f62e9615549a7fd32056f6b544825019dd # timeout=10 Commit message: "jobs/update-osmo-…: only trigger container rebuild" > git rev-list --no-walk 3633d1f62e9615549a7fd32056f6b544825019dd # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins13249731471428754429.sh + docker run --rm=true -e PARALLEL_MAKE=-j8 -u build -v <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…>:/build -w /build osmocom-build/debian-bookworm-build scripts/osmocom-build-old-tags-against-master.sh Temp dir: /build/_temp Building libraries from current master... * libosmocore 11af846dc3afdeaec8c85283502d8ebcc9d282c9 * libosmo-abis 4bd83dfd71afaf81e826febf79e63dd06abe73a3 * libosmo-netif 7add8d791eff4cfa2317c0c05bf516fda1591bd1 * libosmo-sccp 428ea8407844f3313ce611365bffaaa7656c540a * libsmpp34 f1ec51db83de0d20b5ad0f88756016f289d5d268 * libasn1c de520a417a95f47ec13b895b7c129d2969b791d7 * osmo-ggsn 561a9bc77ce21c5a6134315aa539b5f8b50aedd8 * osmo-iuh bb71c57a9ca42f74ef8d6a4fe56bef962352671c * osmo-hlr c819234a42af5f0c6a9114b605ff8365e89d770d * osmo-mgw f1b557988db61bb501db82793d7623ed7bd2d39f Building legacy libraries... * osmo-mgw 1.4.0 (provides libosmo-legacy-mgcp) Building old tags against libraries from current master... (ERR: new error, err: known error) * libosmo-abis 1.5.1 1.5.2 1.6.0 * libosmocore 1.9.2 1.9.3 1.10.0 * libosmo-netif 1.3.0 1.4.0 (ERR) 1.5.0 * libosmo-sccp 1.8.1 1.8.2 1.9.0 * openbsc 1.4.0 (err) 1.4.1 (err) 1.4.2 * osmo-bsc 1.11.0 1.11.1 1.12.0 * osmo-bts 1.7.1 1.7.2 1.8.0 * osmo-ggsn 1.10.2 1.11.0 1.12.0 * osmo-hlr 1.6.2 1.7.0 1.8.0 * osmo-iuh 1.5.0 1.5.1 1.6.0 * osmo-mgw 1.12.1 1.12.2 1.13.0 * osmo-msc 1.11.0 1.11.1 1.12.0 * osmo-pcu 1.3.1 1.4.0 1.5.0 * osmo-sgsn 1.11.0 1.11.1 1.12.0 * osmo-sip-connector 1.6.2 1.6.3 1.7.0 * osmo-trx 1.6.1 1.6.2 1.7.0 --- BUILD FAILED: libosmo-netif-1.4.0.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc-devel(a)lists.openbsc.org> Subject: [libosmo-netif 1.4.0] testsuite: 1 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[3]: *** [Makefile:893: check-local] Error 1 make[3]: Leaving directory '/build/_deps/libosmo-netif/tests' make[2]: *** [Makefile:712: check-am] Error 2 make[2]: Leaving directory '/build/_deps/libosmo-netif/tests' make[1]: *** [Makefile:509: check-recursive] Error 1 make[1]: Leaving directory '/build/_deps/libosmo-netif' make: *** [Makefile:808: check] Error 2 --- Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: Osmocom-release-manuals #526
by jenkins＠lists.osmocom.org 26 Jul '24

26 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/526/display…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/ws/> [ssh-agent] Looking for ssh-agent implementation... [ssh-agent] Exec ssh-agent (binary ssh-agent on a remote machine) $ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-XXXXXXxlN88k/agent.610770 SSH_AGENT_PID=610772 [ssh-agent] Started. Running ssh-add (command line suppressed) Identity added: <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/ws/@tmp/pri…> (osmocom-jenkins) [ssh-agent] Using credentials docs (OS#5798) The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 3633d1f62e9615549a7fd32056f6b544825019dd (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 3633d1f62e9615549a7fd32056f6b544825019dd # timeout=10 Commit message: "jobs/update-osmo-…: only trigger container rebuild" > git rev-list --no-walk 3633d1f62e9615549a7fd32056f6b544825019dd # timeout=10 [Osmocom-release-manuals] $ /bin/sh -xe /tmp/jenkins3167631642228668099.sh + scripts/manuals/publish-manuals-for-tags.sh :: Cloning https://gerrit.osmocom.org/osmo-gsm-manuals Cloning into 'osmo-gsm-manuals'... :: Checkout master HEAD is now at 4527acf Bump version: 1.5.0.13-b3b2 → 1.6.0 Already on 'master' Your branch is up to date with 'origin/master'. :: Listing files on server: /docs :: (openbsc) Listing files on server: /docs/openbsc :: (openbsc) Getting git tags :: (openbsc) Building missing manuals :: (openbsc, 0.9.0): skipping, tag is ignored :: (openbsc, 0.9.1): skipping, tag is ignored :: (openbsc, 0.9.2): skipping, tag is ignored :: (openbsc, 0.9.3): skipping, tag is ignored :: (openbsc, 0.9.4): skipping, tag is ignored :: (openbsc, 0.9.5): skipping, tag is ignored :: (openbsc, 0.9.6): skipping, tag is ignored :: (openbsc, 0.9.8): skipping, tag is ignored :: (openbsc, 0.9.9): skipping, tag is ignored :: (openbsc, 0.9.10): skipping, tag is ignored :: (openbsc, 0.9.11): skipping, tag is ignored :: (openbsc, 0.9.12): skipping, tag is ignored :: (openbsc, 0.9.13): skipping, tag is ignored :: (openbsc, 0.9.14): skipping, tag is ignored :: (openbsc, 0.9.15): skipping, tag is ignored :: (openbsc, 0.9.16): skipping, tag is ignored :: (openbsc, 0.10.0): skipping, tag is ignored :: (openbsc, 0.10.1): skipping, tag is ignored :: (openbsc, 0.11.0): skipping, tag is ignored :: (openbsc, 0.12.0): skipping, tag is ignored :: (openbsc, 0.13.0): skipping, tag is ignored :: (openbsc, 0.14.0): skipping, tag is ignored :: (openbsc, 0.15.0): skipping, tag is ignored :: (openbsc, 1.0.0): skipping, tag is ignored :: (openbsc, 1.1.0): skipping, tag is ignored :: (openbsc, 1.2.0): skipping, manuals exist :: (openbsc, 1.3.0): skipping, manuals exist :: (openbsc, 1.3.1): skipping, manuals exist :: (openbsc, 1.3.2): skipping, manuals exist :: (openbsc, 1.3.3): skipping, manuals exist :: (openbsc, 1.4.0): skipping, manuals exist :: (openbsc, 1.4.1): skipping, manuals exist :: (openbsc, 1.4.2): skipping, manuals exist :: (osmo-bsc) Listing files on server: /docs/osmo-bsc :: (osmo-bsc) Getting git tags :: (osmo-bsc) Building missing manuals :: (osmo-bsc, 1.0.1): skipping, tag is ignored :: (osmo-bsc, 1.1.0): skipping, tag is ignored :: (osmo-bsc, 1.1.1): skipping, tag is ignored :: (osmo-bsc, 1.1.2): skipping, tag is ignored :: (osmo-bsc, 1.2.0): skipping, tag is ignored :: (osmo-bsc, 1.2.1): skipping, tag is ignored :: (osmo-bsc, 1.2.2): skipping, tag is ignored :: (osmo-bsc, 1.3.0): skipping, tag is ignored :: (osmo-bsc, 1.4.0): skipping, tag is ignored :: (osmo-bsc, 1.4.1): skipping, tag is ignored :: (osmo-bsc, 1.5.0): skipping, tag is ignored :: (osmo-bsc, 1.6.0): skipping, tag is ignored :: (osmo-bsc, 1.6.1): skipping, manuals exist :: (osmo-bsc, 1.7.0): skipping, manuals exist :: (osmo-bsc, 1.7.1): skipping, manuals exist :: (osmo-bsc, 1.7.2): skipping, manuals exist :: (osmo-bsc, 1.8.0): skipping, manuals exist :: (osmo-bsc, 1.8.1): skipping, manuals exist :: (osmo-bsc, 1.9.0): skipping, manuals exist :: (osmo-bsc, 1.9.1): skipping, manuals exist :: (osmo-bsc, 1.9.2): skipping, manuals exist :: (osmo-bsc, 1.10.0): skipping, manuals exist :: (osmo-bsc, 1.11.0): skipping, manuals exist :: (osmo-bsc, 1.11.1): skipping, manuals exist :: (osmo-bsc-nat) Listing files on server: /docs/osmo-bsc-nat :: (osmo-bsc-nat) Getting git tags :: (osmo-bsc-nat) Building missing manuals :: (osmo-bts) Listing files on server: /docs/osmo-bts :: (osmo-bts) Getting git tags :: (osmo-bts) Building missing manuals :: (osmo-bts, 0.0.1): skipping, tag is ignored :: (osmo-bts, 0.1.0): skipping, tag is ignored :: (osmo-bts, 0.2.0): skipping, tag is ignored :: (osmo-bts, 0.3.0): skipping, tag is ignored :: (osmo-bts, 0.4.0): skipping, tag is ignored :: (osmo-bts, 0.6.0): skipping, tag is ignored :: (osmo-bts, 0.7.0): skipping, tag is ignored :: (osmo-bts, 0.8.0): skipping, tag is ignored :: (osmo-bts, 0.8.1): skipping, tag is ignored :: (osmo-bts, 1.0.0): skipping, tag is ignored :: (osmo-bts, 1.0.1): skipping, tag is ignored :: (osmo-bts, 1.1.0): skipping, tag is ignored :: (osmo-bts, 1.2.0): skipping, tag is ignored :: (osmo-bts, 1.2.1): skipping, manuals exist :: (osmo-bts, 1.2.2): skipping, manuals exist :: (osmo-bts, 1.3.0): skipping, manuals exist :: (osmo-bts, 1.3.1): skipping, manuals exist :: (osmo-bts, 1.3.2): skipping, manuals exist :: (osmo-bts, 1.3.3): skipping, manuals exist :: (osmo-bts, 1.4.0): skipping, manuals exist :: (osmo-bts, 1.4.1): skipping, manuals exist :: (osmo-bts, 1.5.0): skipping, manuals exist :: (osmo-bts, 1.6.0): skipping, manuals exist :: (osmo-bts, 1.7.0): skipping, manuals exist :: (osmo-bts, 1.7.1): skipping, manuals exist :: (osmo-bts, 1.7.2): skipping, manuals exist :: (osmo-cbc) Listing files on server: /docs/osmo-cbc :: (osmo-cbc) Getting git tags :: (osmo-cbc) Building missing manuals :: (osmo-cbc, 0.1.0): skipping, manuals exist :: (osmo-cbc, 0.2.0): skipping, manuals exist :: (osmo-cbc, 0.2.1): skipping, manuals exist :: (osmo-cbc, 0.2.2): skipping, manuals exist :: (osmo-cbc, 0.2.3): skipping, manuals exist :: (osmo-cbc, 0.3.0): skipping, manuals exist :: (osmo-cbc, 0.4.0): skipping, manuals exist :: (osmo-cbc, 0.4.1): skipping, manuals exist :: (osmo-cbc, 0.4.2): skipping, manuals exist :: (osmocom-bb) Listing files on server: /docs/osmocom-bb :: (osmocom-bb) Getting git tags :: (osmocom-bb) Building missing manuals :: (osmo-e1d) Listing files on server: /docs/osmo-e1d :: (osmo-e1d) Getting git tags :: (osmo-e1d) Building missing manuals :: (osmo-e1d, 0.0.1): skipping, tag is ignored :: (osmo-e1d, 0.1.0): skipping, tag is ignored :: (osmo-e1d, 0.1.1): skipping, tag is ignored :: (osmo-e1d, 0.2.0): skipping, tag is ignored :: (osmo-e1d, 0.2.1): skipping, tag is ignored :: (osmo-e1d, 0.2.2): skipping, tag is ignored :: (osmo-e1d, 0.3.0): skipping, tag is ignored :: (osmo-e1d, 0.4.0): skipping, tag is ignored :: (osmo-e1d, 0.5.0): skipping, manuals exist :: (osmo-e1d, 0.6.0): skipping, manuals exist :: (osmo-e1d, 0.7.0) Cloning https://gerrit.osmocom.org/osmo-e1d Cloning into 'osmo-e1d'... :: (osmo-e1d, 0.7.0) Checkout 0.7.0 HEAD is now at e11e778 Bump version: 0.6.0.24-f030 → 0.7.0 Note: switching to '0.7.0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at e11e778 Bump version: 0.6.0.24-f030 → 0.7.0 :: (osmo-e1d, 0.7.0) Building manuals + apt-get update Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease [1582 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ Packages [193 kB] Fetched 250 kB in 0s (1289 kB/s) Reading package lists... + apt-get -y upgrade osmocom-nightly Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following NEW packages will be installed: osmocom-nightly 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 1180 B of archives. After this operation, 7168 B of additional disk space will be used. Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ osmocom-nightly 202407232026 [1180 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 1180 B in 0s (65.4 kB/s) Selecting previously unselected package osmocom-nightly. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 117413 files and directories currently installed.) Preparing to unpack .../osmocom-nightly_202407232026_amd64.deb ... Unpacking osmocom-nightly (202407232026) ... Setting up osmocom-nightly (202407232026) ... + apt-get -y build-dep /build Note, using directory '/build' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: builddeps:/build : Depends: libosmocore-dev (>= 1.10.0) but it is not going to be installed Depends: osmo-gsm-manuals-dev (>= 1.5.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. :: (osmo-e1d, 0.7.0) Building manuals failed! Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 610772 killed; [ssh-agent] Stopped.

1 2

Build failed in Jenkins: ttcn3-msc-test #2461
by jenkins＠lists.osmocom.org 26 Jul '24

26 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-msc-test/2461/display/redirect> Changes: ------------------------------------------ [...truncated 126.72 KB...] #7 5.103 Setting up libosmocore22:amd64 (1.10.0.202407242026) ... #7 5.115 Setting up libosmocodec4:amd64 (1.10.0.202407242026) ... #7 5.131 Setting up libsmpp34-dev:amd64 (1.14.4.1.f1ec.202407242026) ... #7 5.140 Setting up libosmo-sccp-dev:amd64 (1.8.0.67.fb30.202407242026) ... #7 5.151 Setting up libasn1c1:amd64 (0.9.37.202407242026) ... #7 5.167 Setting up libosmovty13:amd64 (1.10.0.202407242026) ... #7 5.176 Setting up libosmoisdn0:amd64 (1.10.0.202407242026) ... #7 5.186 Setting up libosmotrau10:amd64 (1.6.0.202407242026) ... #7 5.195 Setting up libasn1c-dev:amd64 (0.9.37.202407242026) ... #7 5.209 Setting up libosmo-mgcp-client12:amd64 (1.12.1.58.95e50.202407242026) ... #7 5.219 Setting up libosmo-mgcp-client-dev:amd64 (1.12.1.58.95e50.202407242026) ... #7 5.228 Setting up libosmousb0:amd64 (1.10.0.202407242026) ... #7 5.241 Setting up libosmogsm20:amd64 (1.10.0.202407242026) ... #7 5.251 Setting up libosmoabis13:amd64 (1.6.0.202407242026) ... #7 5.260 Setting up libosmoctrl0:amd64 (1.10.0.202407242026) ... #7 5.277 Setting up libosmogb14:amd64 (1.10.0.202407242026) ... #7 5.290 Setting up libosmonetif11:amd64 (1.5.0.202407242026) ... #7 5.303 Setting up libosmo-gsup-client0:amd64 (1.7.0.17.bae1.202407242026) ... #7 5.313 Setting up libosmo-abis-dev:amd64 (1.6.0.202407242026) ... #7 5.322 Setting up libosmocoding0:amd64 (1.10.0.202407242026) ... #7 5.336 Setting up libosmosim2:amd64 (1.10.0.202407242026) ... #7 5.346 Setting up libosmocore (1.10.0.202407242026) ... #7 5.359 Setting up libosmo-sigtran9:amd64 (1.8.0.67.fb30.202407242026) ... #7 5.369 Setting up libosmo-ranap7:amd64 (1.5.1.11.d14f.202407242026) ... #7 5.381 Setting up libosmocore-dev:amd64 (1.10.0.202407242026) ... #7 5.394 Setting up libosmo-netif-dev:amd64 (1.5.0.202407242026) ... #7 5.404 Setting up libosmo-ranap-dev:amd64 (1.5.1.11.d14f.202407242026) ... #7 5.414 Setting up libosmo-gsup-client-dev:amd64 (1.7.0.17.bae1.202407242026) ... #7 5.430 Setting up libosmo-sigtran-dev:amd64 (1.8.0.67.fb30.202407242026) ... #7 5.441 Processing triggers for libc-bin (2.36-9+deb12u7) ... #7 DONE 5.6s #8 [3/8] WORKDIR /TMP #8 DONE 0.1s #9 [4/8] RUN GIT clone https://gerrit.osmocom.org/osmo-msc.git #9 0.351 Cloning into 'osmo-msc'... #9 DONE 1.8s #10 [5/8] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-MSC/+/MASTER?FORMAT=TEXT /tmp/commit-osmo-msc #10 DONE 0.0s #11 [6/8] RUN CD osmo-msc && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-smpp --enable-iu && make "-j$(nproc)" install #11 0.392 Already on 'master' #11 0.393 Your branch is up to date with 'origin/master'. #11 0.395 refs/heads/master #11 0.418 HEAD is now at 240442218 Bump version: 1.11.1.65-22d4f3-dirty → 1.12.0 #11 0.419 master #11 0.421 24044221839cf8c7839d48ce99be2cc1a716cc12 #11 3.100 libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. #11 3.100 libtoolize: copying file './ltmain.sh' #11 3.151 libtoolize: putting macros in 'm4'. #11 3.151 libtoolize: copying file 'm4/libtool.m4' #11 3.171 libtoolize: copying file 'm4/ltoptions.m4' #11 3.192 libtoolize: copying file 'm4/ltsugar.m4' #11 3.209 libtoolize: copying file 'm4/ltversion.m4' #11 3.229 libtoolize: copying file 'm4/lt~obsolete.m4' #11 3.264 libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, #11 3.264 libtoolize: and rerunning libtoolize and aclocal. #11 4.831 configure.ac:118: warning: The macro `AC_HELP_STRING' is obsolete. #11 4.831 configure.ac:118: You should run autoupdate. #11 4.831 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... #11 4.831 configure.ac:118: the top level #11 4.831 configure.ac:155: warning: The macro `AC_HELP_STRING' is obsolete. #11 4.831 configure.ac:155: You should run autoupdate. #11 4.831 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... #11 4.831 configure.ac:155: the top level #11 4.832 configure.ac:231: warning: 'AM_CONFIG_HEADER': this macro is obsolete. #11 4.832 configure.ac:231: You should use the 'AC_CONFIG_HEADERS' macro instead. #11 4.832 ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... #11 4.832 aclocal.m4:1089: AM_CONFIG_HEADER is expanded from... #11 4.832 configure.ac:231: the top level #11 4.832 configure.ac:233: warning: AC_OUTPUT should be used without arguments. #11 4.832 configure.ac:233: You should run autoupdate. #11 5.530 configure.ac:23: installing './compile' #11 5.532 configure.ac:25: installing './config.guess' #11 5.534 configure.ac:25: installing './config.sub' #11 5.536 configure.ac:9: installing './install-sh' #11 5.539 configure.ac:9: installing './missing' #11 5.656 doc/sequence_charts/Makefile.am:26: warning: '%'-style pattern rules are a GNU make extension #11 5.656 doc/sequence_charts/Makefile.am:29: warning: '%'-style pattern rules are a GNU make extension #11 5.759 src/libmsc/Makefile.am: installing './depcomp' #11 5.931 tests/db_sms/Makefile.am:36: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 5.931 tests/db_sms/Makefile.am:36: but option 'subdir-objects' is disabled #11 5.931 automake: warning: possible forward-incompatibility. #11 5.931 automake: At least one source file is in a subdirectory, but the 'subdir-objects' #11 5.931 automake: automake option hasn't been enabled. For now, the corresponding output #11 5.931 automake: object file(s) will be placed in the top-level directory. However, this #11 5.931 automake: behavior may change in a future Automake major version, with object #11 5.931 automake: files being placed in the same subdirectory as the corresponding sources. #11 5.931 automake: You are advised to start using 'subdir-objects' option throughout your #11 5.931 automake: project, to avoid future incompatibilities. #11 5.994 tests/msc_vlr/Makefile.am:119: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 5.994 tests/msc_vlr/Makefile.am:119: but option 'subdir-objects' is disabled #11 5.995 tests/msc_vlr/Makefile.am:149: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 5.995 tests/msc_vlr/Makefile.am:149: but option 'subdir-objects' is disabled #11 5.997 tests/msc_vlr/Makefile.am:101: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 5.997 tests/msc_vlr/Makefile.am:101: but option 'subdir-objects' is disabled #11 5.998 tests/msc_vlr/Makefile.am:107: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 5.998 tests/msc_vlr/Makefile.am:107: but option 'subdir-objects' is disabled #11 5.999 tests/msc_vlr/Makefile.am:125: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 5.999 tests/msc_vlr/Makefile.am:125: but option 'subdir-objects' is disabled #11 6.001 tests/msc_vlr/Makefile.am:131: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.001 tests/msc_vlr/Makefile.am:131: but option 'subdir-objects' is disabled #11 6.002 tests/msc_vlr/Makefile.am:137: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.002 tests/msc_vlr/Makefile.am:137: but option 'subdir-objects' is disabled #11 6.003 tests/msc_vlr/Makefile.am:95: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.003 tests/msc_vlr/Makefile.am:95: but option 'subdir-objects' is disabled #11 6.004 tests/msc_vlr/Makefile.am:143: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.004 tests/msc_vlr/Makefile.am:143: but option 'subdir-objects' is disabled #11 6.005 tests/msc_vlr/Makefile.am:155: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.005 tests/msc_vlr/Makefile.am:155: but option 'subdir-objects' is disabled #11 6.007 tests/msc_vlr/Makefile.am:161: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.007 tests/msc_vlr/Makefile.am:161: but option 'subdir-objects' is disabled #11 6.008 tests/msc_vlr/Makefile.am:113: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.008 tests/msc_vlr/Makefile.am:113: but option 'subdir-objects' is disabled #11 6.084 tests/sms_queue/Makefile.am:36: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, #11 6.084 tests/sms_queue/Makefile.am:36: but option 'subdir-objects' is disabled #11 6.218 checking for a BSD-compatible install... /usr/bin/install -c #11 6.227 checking whether build environment is sane... yes #11 6.236 checking for a race-free mkdir -p... /usr/bin/mkdir -p #11 6.238 checking for gawk... gawk #11 6.238 checking whether make sets $(MAKE)... yes #11 6.249 checking whether make supports nested variables... yes #11 6.256 checking whether make supports nested variables... (cached) yes #11 6.256 checking whether make sets $(MAKE)... (cached) yes #11 6.259 checking for gcc... gcc #11 6.286 checking whether the C compiler works... yes #11 6.319 checking for C compiler default output file name... a.out #11 6.320 checking for suffix of executables... #11 6.360 checking whether we are cross compiling... no #11 6.402 checking for suffix of object files... o #11 6.424 checking whether the compiler supports GNU C... yes #11 6.447 checking whether gcc accepts -g... yes #11 6.471 checking for gcc option to enable C11 features... none needed #11 6.501 checking whether gcc understands -c and -o together... yes #11 6.535 checking whether make supports the include directive... yes (GNU style) #11 6.542 checking dependency style of gcc... gcc3 #11 6.579 checking build system type... x86_64-pc-linux-gnu #11 6.626 checking host system type... x86_64-pc-linux-gnu #11 6.626 checking how to print strings... printf #11 6.653 checking for a sed that does not truncate output... /usr/bin/sed #11 6.658 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.660 checking for egrep... /usr/bin/grep -E #11 6.661 checking for fgrep... /usr/bin/grep -F #11 6.663 checking for ld used by gcc... /usr/bin/ld #11 6.668 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.670 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.672 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.694 checking whether ln -s works... yes #11 6.694 checking the maximum length of command line arguments... 1572864 #11 6.702 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop #11 6.702 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.702 checking for /usr/bin/ld option to reload object files... -r #11 6.703 checking for file... file #11 6.703 checking for objdump... objdump #11 6.704 checking how to recognize dependent libraries... pass_all #11 6.704 checking for dlltool... no #11 6.704 checking how to associate runtime and link libraries... printf %s\n #11 6.705 checking for ar... ar #11 6.705 checking for archiver @FILE support... @ #11 6.732 checking for strip... strip #11 6.733 checking for ranlib... ranlib #11 6.733 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.795 checking for sysroot... no #11 6.795 checking for a working dd... /usr/bin/dd #11 6.798 checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 #11 6.819 checking for mt... no #11 6.819 checking if : is a manifest tool... no #11 6.825 checking for stdio.h... yes #11 6.844 checking for stdlib.h... yes #11 6.865 checking for string.h... yes #11 6.887 checking for inttypes.h... yes #11 6.912 checking for stdint.h... yes #11 6.935 checking for strings.h... yes #11 6.963 checking for sys/stat.h... yes #11 6.988 checking for sys/types.h... yes #11 7.012 checking for unistd.h... yes #11 7.041 checking for dlfcn.h... yes #11 7.073 checking for objdir... .libs #11 7.141 checking if gcc supports -fno-rtti -fno-exceptions... no #11 7.162 checking for gcc option to produce PIC... -fPIC -DPIC #11 7.162 checking if gcc PIC flag -fPIC -DPIC works... yes #11 7.184 checking if gcc static flag -static works... yes #11 7.249 checking if gcc supports -c -o file.o... yes #11 7.274 checking if gcc supports -c -o file.o... (cached) yes #11 7.275 checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes #11 7.286 checking whether -lc should be explicitly linked in... no #11 7.314 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.377 checking how to hardcode library paths into programs... immediate #11 7.377 checking whether stripping libraries is possible... yes #11 7.379 checking if libtool supports shared libraries... yes #11 7.379 checking whether to build shared libraries... yes #11 7.379 checking whether to build static libraries... yes #11 7.380 checking for pkg-config... /usr/bin/pkg-config #11 7.381 checking for pkg-config... /usr/bin/pkg-config #11 7.381 checking pkg-config is at least version 0.20... yes #11 7.383 checking for sqlite3... yes #11 7.394 checking for libosmocore >= 1.10.0... yes #11 7.403 checking for libosmovty >= 1.10.0... yes #11 7.412 checking for libosmoctrl >= 1.10.0... yes #11 7.422 checking for libosmogsm >= 1.10.0... yes #11 7.431 checking for libosmoabis >= 1.6.0... yes #11 7.440 checking for libosmo-netif >= 1.5.0... yes #11 7.448 checking for libosmo-sigtran >= 1.9.0... no #11 7.456 configure: error: Package requirements (libosmo-sigtran >= 1.9.0) were not met: #11 7.456 #11 7.456 Package dependency requirement 'libosmo-sigtran >= 1.9.0' could not be satisfied. #11 7.456 Package 'libosmo-sigtran' has version '1.8.0.67-fb30.202407242026', required version is '>= 1.9.0' #11 7.456 #11 7.456 Consider adjusting the PKG_CONFIG_PATH environment variable if you #11 7.456 installed software in a non-standard prefix. #11 7.456 #11 7.456 Alternatively, you may set the environment variables LIBOSMOSIGTRAN_CFLAGS #11 7.456 and LIBOSMOSIGTRAN_LIBS to avoid the need to call pkg-config. #11 7.456 See the pkg-config man page for more details. #11 ERROR: process "/bin/sh -c cd osmo-msc && \tgit fetch && git checkout $OSMO_MSC_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_MSC_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-smpp --enable-iu && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 1 ------ > [6/8] RUN CD osmo-msc && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-smpp --enable-iu && make "-j$(nproc)" install: 7.456 7.456 Package dependency requirement 'libosmo-sigtran >= 1.9.0' could not be satisfied. 7.456 Package 'libosmo-sigtran' has version '1.8.0.67-fb30.202407242026', required version is '>= 1.9.0' 7.456 7.456 Consider adjusting the PKG_CONFIG_PATH environment variable if you 7.456 installed software in a non-standard prefix. 7.456 7.456 Alternatively, you may set the environment variables LIBOSMOSIGTRAN_CFLAGS 7.456 and LIBOSMOSIGTRAN_LIBS to avoid the need to call pkg-config. 7.456 See the pkg-config man page for more details. ------ Dockerfile:50 -------------------- 49 | 50 | >>> RUN cd osmo-msc && \ 51 | >>> git fetch && git checkout $OSMO_MSC_BRANCH && \ 52 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_MSC_BRANCH || exit 1); \ 53 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 54 | >>> autoreconf -fi && \ 55 | >>> ./configure --enable-smpp --enable-iu && \ 56 | >>> make "-j$(nproc)" install 57 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-msc && \tgit fetch && git checkout $OSMO_MSC_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_MSC_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-smpp --enable-iu && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-msc-test/ws/osmo-msc-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Jenkins build became unstable: ttcn3-bsc-test-asan #45
by jenkins＠lists.osmocom.org 25 Jul '24

25 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-asan/45/display/redi…>

1 1

Build failed in Jenkins: ttcn3-sgsn-test-io_uring #140
by jenkins＠lists.osmocom.org 25 Jul '24

25 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/140/displa…> Changes: [Pau Espin Pedrol] ttcn3-sgsn: Use 2nd IP address on emulated HNBGW [Pau Espin Pedrol] ttcn3-sgsn: Use new 172.18.8.104 in emulated RNC ------------------------------------------ [...truncated 109.24 KB...] #7 3.799 Selecting previously unselected package libosmo-sigtran-dev:amd64. #7 3.807 Preparing to unpack .../24-libosmo-sigtran-dev_1.8.0.67.fb30.202407242026_amd64.deb ... #7 3.811 Unpacking libosmo-sigtran-dev:amd64 (1.8.0.67.fb30.202407242026) ... #7 3.900 Selecting previously unselected package libsmpp1:amd64. #7 3.910 Preparing to unpack .../25-libsmpp1_1.14.4.1.f1ec.202407242026_amd64.deb ... #7 3.913 Unpacking libsmpp1:amd64 (1.14.4.1.f1ec.202407242026) ... #7 3.965 Selecting previously unselected package libsmpp34-dev:amd64. #7 3.974 Preparing to unpack .../26-libsmpp34-dev_1.14.4.1.f1ec.202407242026_amd64.deb ... #7 3.978 Unpacking libsmpp34-dev:amd64 (1.14.4.1.f1ec.202407242026) ... #7 4.039 Selecting previously unselected package libasn1c1:amd64. #7 4.049 Preparing to unpack .../27-libasn1c1_0.9.37.202407242026_amd64.deb ... #7 4.052 Unpacking libasn1c1:amd64 (0.9.37.202407242026) ... #7 4.094 Selecting previously unselected package libasn1c-dev:amd64. #7 4.103 Preparing to unpack .../28-libasn1c-dev_0.9.37.202407242026_amd64.deb ... #7 4.106 Unpacking libasn1c-dev:amd64 (0.9.37.202407242026) ... #7 4.168 Selecting previously unselected package libosmo-ranap7:amd64. #7 4.178 Preparing to unpack .../29-libosmo-ranap7_1.5.1.11.d14f.202407242026_amd64.deb ... #7 4.182 Unpacking libosmo-ranap7:amd64 (1.5.1.11.d14f.202407242026) ... #7 4.236 Selecting previously unselected package libosmo-ranap-dev:amd64. #7 4.244 Preparing to unpack .../30-libosmo-ranap-dev_1.5.1.11.d14f.202407242026_amd64.deb ... #7 4.250 Unpacking libosmo-ranap-dev:amd64 (1.5.1.11.d14f.202407242026) ... #7 4.411 Setting up osmocom-nightly (202407242026) ... #7 4.423 Setting up libsmpp1:amd64 (1.14.4.1.f1ec.202407242026) ... #7 4.432 Setting up libosmocore22:amd64 (1.10.0.202407242026) ... #7 4.440 Setting up libosmocodec4:amd64 (1.10.0.202407242026) ... #7 4.453 Setting up libsmpp34-dev:amd64 (1.14.4.1.f1ec.202407242026) ... #7 4.464 Setting up libosmo-sccp-dev:amd64 (1.8.0.67.fb30.202407242026) ... #7 4.474 Setting up libasn1c1:amd64 (0.9.37.202407242026) ... #7 4.485 Setting up libosmovty13:amd64 (1.10.0.202407242026) ... #7 4.496 Setting up libosmoisdn0:amd64 (1.10.0.202407242026) ... #7 4.505 Setting up libosmotrau10:amd64 (1.6.0.202407242026) ... #7 4.517 Setting up libgtp6:amd64 (1.11.0.31.7ae1.202407242026) ... #7 4.526 Setting up libgtp-dev:amd64 (1.11.0.31.7ae1.202407242026) ... #7 4.535 Setting up libasn1c-dev:amd64 (0.9.37.202407242026) ... #7 4.547 Setting up libosmousb0:amd64 (1.10.0.202407242026) ... #7 4.560 Setting up libosmogsm20:amd64 (1.10.0.202407242026) ... #7 4.570 Setting up libosmoabis13:amd64 (1.6.0.202407242026) ... #7 4.582 Setting up libosmoctrl0:amd64 (1.10.0.202407242026) ... #7 4.594 Setting up libosmogb14:amd64 (1.10.0.202407242026) ... #7 4.604 Setting up libosmonetif11:amd64 (1.5.0.202407242026) ... #7 4.616 Setting up libosmo-gsup-client0:amd64 (1.7.0.17.bae1.202407242026) ... #7 4.627 Setting up libosmo-abis-dev:amd64 (1.6.0.202407242026) ... #7 4.636 Setting up libosmocoding0:amd64 (1.10.0.202407242026) ... #7 4.647 Setting up libosmosim2:amd64 (1.10.0.202407242026) ... #7 4.657 Setting up libosmocore (1.10.0.202407242026) ... #7 4.668 Setting up libosmo-sigtran9:amd64 (1.8.0.67.fb30.202407242026) ... #7 4.677 Setting up libosmo-ranap7:amd64 (1.5.1.11.d14f.202407242026) ... #7 4.690 Setting up libosmocore-dev:amd64 (1.10.0.202407242026) ... #7 4.699 Setting up libosmo-netif-dev:amd64 (1.5.0.202407242026) ... #7 4.711 Setting up libosmo-ranap-dev:amd64 (1.5.1.11.d14f.202407242026) ... #7 4.720 Setting up libosmo-gsup-client-dev:amd64 (1.7.0.17.bae1.202407242026) ... #7 4.732 Setting up libosmo-sigtran-dev:amd64 (1.8.0.67.fb30.202407242026) ... #7 4.742 Processing triggers for libc-bin (2.36-9+deb12u7) ... #7 DONE 4.9s #8 [3/8] WORKDIR /TMP #8 DONE 0.0s #9 [4/8] RUN GIT clone https://gerrit.osmocom.org/osmo-sgsn.git #9 0.338 Cloning into 'osmo-sgsn'... #9 DONE 2.2s #10 [5/8] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-SGSN/+/MASTER?FORMAT=TEXT /tmp/commit-osmo-sgsn #10 DONE 0.0s #11 [6/8] RUN CD osmo-sgsn && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-iu && make "-j$(nproc)" install && ldconfig #11 0.467 Already on 'master' #11 0.467 Your branch is up to date with 'origin/master'. #11 0.469 refs/heads/master #11 0.472 HEAD is now at f8d248e2 Bump version: 1.11.1.22-bea6a-dirty → 1.12.0 #11 0.473 master #11 0.474 f8d248e2d11f0bcee155db2db81c1d47ec8a5807 #11 3.104 libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. #11 3.104 libtoolize: copying file './ltmain.sh' #11 3.155 libtoolize: putting macros in 'm4'. #11 3.155 libtoolize: copying file 'm4/libtool.m4' #11 3.175 libtoolize: copying file 'm4/ltoptions.m4' #11 3.196 libtoolize: copying file 'm4/ltsugar.m4' #11 3.214 libtoolize: copying file 'm4/ltversion.m4' #11 3.234 libtoolize: copying file 'm4/lt~obsolete.m4' #11 3.271 libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, #11 3.271 libtoolize: and rerunning libtoolize and aclocal. #11 4.675 configure.ac:66: warning: The macro `AC_HEADER_STDC' is obsolete. #11 4.675 configure.ac:66: You should run autoupdate. #11 4.675 ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... #11 4.675 configure.ac:66: the top level #11 4.675 configure.ac:117: warning: The macro `AC_HELP_STRING' is obsolete. #11 4.675 configure.ac:117: You should run autoupdate. #11 4.675 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... #11 4.675 configure.ac:117: the top level #11 4.675 configure.ac:154: warning: The macro `AC_HELP_STRING' is obsolete. #11 4.675 configure.ac:154: You should run autoupdate. #11 4.675 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... #11 4.675 configure.ac:154: the top level #11 4.675 configure.ac:233: warning: 'AM_CONFIG_HEADER': this macro is obsolete. #11 4.675 configure.ac:233: You should use the 'AC_CONFIG_HEADERS' macro instead. #11 4.675 ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... #11 4.675 aclocal.m4:1089: AM_CONFIG_HEADER is expanded from... #11 4.675 configure.ac:233: the top level #11 4.675 configure.ac:235: warning: AC_OUTPUT should be used without arguments. #11 4.675 configure.ac:235: You should run autoupdate. #11 5.413 configure.ac:21: installing './compile' #11 5.415 configure.ac:23: installing './config.guess' #11 5.417 configure.ac:23: installing './config.sub' #11 5.418 configure.ac:9: installing './install-sh' #11 5.420 configure.ac:9: installing './missing' #11 5.616 src/gprs/Makefile.am: installing './depcomp' #11 5.709 tests/gprs/Makefile.am:9: warning: source file '$(top_srcdir)/src/gprs/gprs_utils.c' is in a subdirectory, #11 5.709 tests/gprs/Makefile.am:9: but option 'subdir-objects' is disabled #11 5.709 automake: warning: possible forward-incompatibility. #11 5.709 automake: At least one source file is in a subdirectory, but the 'subdir-objects' #11 5.709 automake: automake option hasn't been enabled. For now, the corresponding output #11 5.709 automake: object file(s) will be placed in the top-level directory. However, this #11 5.709 automake: behavior may change in a future Automake major version, with object #11 5.709 automake: files being placed in the same subdirectory as the corresponding sources. #11 5.709 automake: You are advised to start using 'subdir-objects' option throughout your #11 5.709 automake: project, to avoid future incompatibilities. #11 5.958 checking for a BSD-compatible install... /usr/bin/install -c #11 5.967 checking whether build environment is sane... yes #11 5.978 checking for a race-free mkdir -p... /usr/bin/mkdir -p #11 5.980 checking for gawk... gawk #11 5.980 checking whether make sets $(MAKE)... yes #11 5.992 checking whether make supports nested variables... yes #11 5.999 checking whether make supports nested variables... (cached) yes #11 5.999 checking whether make sets $(MAKE)... (cached) yes #11 6.002 checking for gcc... gcc #11 6.027 checking whether the C compiler works... yes #11 6.063 checking for C compiler default output file name... a.out #11 6.065 checking for suffix of executables... #11 6.102 checking whether we are cross compiling... no #11 6.141 checking for suffix of object files... o #11 6.165 checking whether the compiler supports GNU C... yes #11 6.189 checking whether gcc accepts -g... yes #11 6.213 checking for gcc option to enable C11 features... none needed #11 6.263 checking whether gcc understands -c and -o together... yes #11 6.298 checking whether make supports the include directive... yes (GNU style) #11 6.308 checking dependency style of gcc... gcc3 #11 6.347 checking build system type... x86_64-pc-linux-gnu #11 6.398 checking host system type... x86_64-pc-linux-gnu #11 6.398 checking how to print strings... printf #11 6.427 checking for a sed that does not truncate output... /usr/bin/sed #11 6.432 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.434 checking for egrep... /usr/bin/grep -E #11 6.435 checking for fgrep... /usr/bin/grep -F #11 6.437 checking for ld used by gcc... /usr/bin/ld #11 6.441 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.444 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.446 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.465 checking whether ln -s works... yes #11 6.465 checking the maximum length of command line arguments... 1572864 #11 6.472 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop #11 6.472 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.472 checking for /usr/bin/ld option to reload object files... -r #11 6.473 checking for file... file #11 6.473 checking for objdump... objdump #11 6.474 checking how to recognize dependent libraries... pass_all #11 6.474 checking for dlltool... no #11 6.475 checking how to associate runtime and link libraries... printf %s\n #11 6.475 checking for ar... ar #11 6.475 checking for archiver @FILE support... @ #11 6.507 checking for strip... strip #11 6.508 checking for ranlib... ranlib #11 6.508 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.572 checking for sysroot... no #11 6.573 checking for a working dd... /usr/bin/dd #11 6.576 checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 #11 6.593 checking for mt... no #11 6.593 checking if : is a manifest tool... no #11 6.597 checking for stdio.h... yes #11 6.615 checking for stdlib.h... yes #11 6.641 checking for string.h... yes #11 6.668 checking for inttypes.h... yes #11 6.696 checking for stdint.h... yes #11 6.724 checking for strings.h... yes #11 6.747 checking for sys/stat.h... yes #11 6.774 checking for sys/types.h... yes #11 6.800 checking for unistd.h... yes #11 6.825 checking for dlfcn.h... yes #11 6.854 checking for objdir... .libs #11 6.916 checking if gcc supports -fno-rtti -fno-exceptions... no #11 6.940 checking for gcc option to produce PIC... -fPIC -DPIC #11 6.940 checking if gcc PIC flag -fPIC -DPIC works... yes #11 6.962 checking if gcc static flag -static works... yes #11 7.022 checking if gcc supports -c -o file.o... yes #11 7.050 checking if gcc supports -c -o file.o... (cached) yes #11 7.050 checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes #11 7.060 checking whether -lc should be explicitly linked in... no #11 7.085 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.149 checking how to hardcode library paths into programs... immediate #11 7.149 checking whether stripping libraries is possible... yes #11 7.151 checking if libtool supports shared libraries... yes #11 7.151 checking whether to build shared libraries... yes #11 7.151 checking whether to build static libraries... yes #11 7.152 checking for pkg-config... /usr/bin/pkg-config #11 7.153 checking for pkg-config... /usr/bin/pkg-config #11 7.153 checking pkg-config is at least version 0.20... yes #11 7.154 checking for libosmocore >= 1.10.0... yes #11 7.162 checking for libosmovty >= 1.10.0... yes #11 7.172 checking for libosmoctrl >= 1.10.0... yes #11 7.182 checking for libosmogsm >= 1.10.0... yes #11 7.192 checking for libosmogb >= 1.10.0... yes #11 7.202 checking for libosmoabis >= 1.6.0... yes #11 7.212 checking for libosmo-netif >= 1.5.0... yes #11 7.220 checking for libosmo-gsup-client >= 1.8.0... no #11 7.228 configure: error: Package requirements (libosmo-gsup-client >= 1.8.0) were not met: #11 7.228 #11 7.228 Package dependency requirement 'libosmo-gsup-client >= 1.8.0' could not be satisfied. #11 7.228 Package 'libosmo-gsup-client' has version '1.7.0.17-bae1.202407242026', required version is '>= 1.8.0' #11 7.228 #11 7.228 Consider adjusting the PKG_CONFIG_PATH environment variable if you #11 7.228 installed software in a non-standard prefix. #11 7.228 #11 7.228 Alternatively, you may set the environment variables LIBOSMOGSUPCLIENT_CFLAGS #11 7.228 and LIBOSMOGSUPCLIENT_LIBS to avoid the need to call pkg-config. #11 7.228 See the pkg-config man page for more details. #11 ERROR: process "/bin/sh -c cd osmo-sgsn && \tgit fetch && git checkout $OSMO_SGSN_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_SGSN_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-iu && \tmake \"-j$(nproc)\" install && \tldconfig" did not complete successfully: exit code: 1 ------ > [6/8] RUN CD osmo-sgsn && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-iu && make "-j$(nproc)" install && ldconfig: 7.228 7.228 Package dependency requirement 'libosmo-gsup-client >= 1.8.0' could not be satisfied. 7.228 Package 'libosmo-gsup-client' has version '1.7.0.17-bae1.202407242026', required version is '>= 1.8.0' 7.228 7.228 Consider adjusting the PKG_CONFIG_PATH environment variable if you 7.228 installed software in a non-standard prefix. 7.228 7.228 Alternatively, you may set the environment variables LIBOSMOGSUPCLIENT_CFLAGS 7.228 and LIBOSMOGSUPCLIENT_LIBS to avoid the need to call pkg-config. 7.228 See the pkg-config man page for more details. ------ Dockerfile:48 -------------------- 47 | 48 | >>> RUN cd osmo-sgsn && \ 49 | >>> git fetch && git checkout $OSMO_SGSN_BRANCH && \ 50 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_SGSN_BRANCH || exit 1); \ 51 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 52 | >>> autoreconf -fi && \ 53 | >>> ./configure --enable-iu && \ 54 | >>> make "-j$(nproc)" install && \ 55 | >>> ldconfig 56 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-sgsn && \tgit fetch && git checkout $OSMO_SGSN_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_SGSN_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-iu && \tmake \"-j$(nproc)\" install && \tldconfig" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/ws/osmo-sg…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-bts-test-io_uring #73
by jenkins＠lists.osmocom.org 25 Jul '24

25 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test-io_uring/73/display/…> Changes: [Pau Espin Pedrol] ttcn3-sgsn: Use 2nd IP address on emulated HNBGW [Pau Espin Pedrol] ttcn3-sgsn: Use new 172.18.8.104 in emulated RNC ------------------------------------------ [...truncated 15.96 KB...] --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-bsc-master:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 1.46kB done #1 DONE 0.0s #2 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.1s #4 [internal] load build context #4 DONE 0.0s #5 [1/8] FROM docker.io/osmocom-build/debian-bookworm-build:latest #5 DONE 0.0s #6 https://gerrit.osmocom.org/plugins/gitiles/osmo-bsc/+/master?format=TEXT #6 DONE 0.1s #6 https://gerrit.osmocom.org/plugins/gitiles/osmo-bsc/+/master?format=TEXT #6 DONE 0.1s #7 [2/8] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends libosmocore-dev libosmo-abis-dev libosmo-netif-dev libosmo-sccp-dev libosmo-sigtran-dev libosmo-mgcp-client-dev libgtp-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libosmo-mgcp-client)" "pkgconfig(libosmo-netif)" "pkgconfig(libosmo-sccp)" "pkgconfig(libosmo-sigtran)" "pkgconfig(libosmoabis)" "pkgconfig(libosmocore)" "pkgconfig(libosmoctrl)" "pkgconfig(libosmogb)" "pkgconfig(libosmogsm)" "pkgconfig(libosmovty)" ;; esac #7 CACHED #8 [3/8] WORKDIR /TMP #8 CACHED #9 [4/8] RUN GIT clone https://gerrit.osmocom.org/osmo-bsc.git #9 CACHED #4 [internal] load build context #4 transferring context: 4.21kB done #4 DONE 0.1s #10 [5/8] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-BSC/+/MASTER?FORMAT=TEXT /tmp/commit-osmo-bsc #10 DONE 0.3s #11 [6/8] RUN CD osmo-bsc && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install #11 0.665 From https://gerrit.osmocom.org/osmo-bsc #11 0.665 278bd7580..8f6f82038 master -> origin/master #11 0.666 * [new tag] 1.12.0 -> 1.12.0 #11 0.716 Already on 'master' #11 0.717 Your branch is behind 'origin/master' by 1 commit, and can be fast-forwarded. #11 0.717 (use "git pull" to update your local branch) #11 0.719 refs/heads/master #11 0.747 HEAD is now at 8f6f82038 Bump version: 1.11.0.92-278b-dirty → 1.12.0 #11 0.749 master #11 0.751 8f6f82038d15100cfd8e78e4336077e2c0567f52 #11 3.334 libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. #11 3.334 libtoolize: copying file './ltmain.sh' #11 3.421 libtoolize: putting macros in 'm4'. #11 3.421 libtoolize: copying file 'm4/libtool.m4' #11 3.447 libtoolize: copying file 'm4/ltoptions.m4' #11 3.475 libtoolize: copying file 'm4/ltsugar.m4' #11 3.504 libtoolize: copying file 'm4/ltversion.m4' #11 3.533 libtoolize: copying file 'm4/lt~obsolete.m4' #11 3.588 libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, #11 3.588 libtoolize: and rerunning libtoolize and aclocal. #11 4.860 configure.ac:74: warning: The macro `AC_HEADER_STDC' is obsolete. #11 4.860 configure.ac:74: You should run autoupdate. #11 4.860 ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... #11 4.860 configure.ac:74: the top level #11 4.860 configure.ac:130: warning: The macro `AC_HELP_STRING' is obsolete. #11 4.860 configure.ac:130: You should run autoupdate. #11 4.860 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... #11 4.860 configure.ac:130: the top level #11 4.860 configure.ac:150: warning: The macro `AC_HELP_STRING' is obsolete. #11 4.860 configure.ac:150: You should run autoupdate. #11 4.860 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... #11 4.860 configure.ac:150: the top level #11 4.860 configure.ac:228: warning: 'AM_CONFIG_HEADER': this macro is obsolete. #11 4.860 configure.ac:228: You should use the 'AC_CONFIG_HEADERS' macro instead. #11 4.860 ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... #11 4.860 aclocal.m4:1089: AM_CONFIG_HEADER is expanded from... #11 4.860 configure.ac:228: the top level #11 4.860 configure.ac:230: warning: AC_OUTPUT should be used without arguments. #11 4.860 configure.ac:230: You should run autoupdate. #11 5.590 configure.ac:23: installing './compile' #11 5.593 configure.ac:25: installing './config.guess' #11 5.596 configure.ac:25: installing './config.sub' #11 5.599 configure.ac:9: installing './install-sh' #11 5.602 configure.ac:9: installing './missing' #11 5.650 doc/Makefile.am:34: warning: '%'-style pattern rules are a GNU make extension #11 5.650 doc/Makefile.am:37: warning: '%'-style pattern rules are a GNU make extension #11 5.738 src/ipaccess/Makefile.am: installing './depcomp' #11 6.108 checking for a BSD-compatible install... /usr/bin/install -c #11 6.117 checking whether build environment is sane... yes #11 6.131 checking for a race-free mkdir -p... /usr/bin/mkdir -p #11 6.134 checking for gawk... gawk #11 6.134 checking whether make sets $(MAKE)... yes #11 6.148 checking whether make supports nested variables... yes #11 6.158 checking whether make supports nested variables... (cached) yes #11 6.159 checking whether make sets $(MAKE)... (cached) yes #11 6.162 checking for gcc... gcc #11 6.195 checking whether the C compiler works... yes #11 6.249 checking for C compiler default output file name... a.out #11 6.251 checking for suffix of executables... #11 6.305 checking whether we are cross compiling... no #11 6.359 checking for suffix of object files... o #11 6.383 checking whether the compiler supports GNU C... yes #11 6.406 checking whether gcc accepts -g... yes #11 6.430 checking for gcc option to enable C11 features... none needed #11 6.464 checking whether gcc understands -c and -o together... yes #11 6.496 checking whether make supports the include directive... yes (GNU style) #11 6.507 checking dependency style of gcc... gcc3 #11 6.553 checking build system type... x86_64-pc-linux-gnu #11 6.615 checking host system type... x86_64-pc-linux-gnu #11 6.615 checking how to print strings... printf #11 6.639 checking for a sed that does not truncate output... /usr/bin/sed #11 6.646 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.648 checking for egrep... /usr/bin/grep -E #11 6.650 checking for fgrep... /usr/bin/grep -F #11 6.652 checking for ld used by gcc... /usr/bin/ld #11 6.658 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.661 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.665 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.693 checking whether ln -s works... yes #11 6.693 checking the maximum length of command line arguments... 1572864 #11 6.703 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop #11 6.703 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.703 checking for /usr/bin/ld option to reload object files... -r #11 6.703 checking for file... file #11 6.704 checking for objdump... objdump #11 6.704 checking how to recognize dependent libraries... pass_all #11 6.704 checking for dlltool... no #11 6.705 checking how to associate runtime and link libraries... printf %s\n #11 6.705 checking for ar... ar #11 6.705 checking for archiver @FILE support... @ #11 6.739 checking for strip... strip #11 6.740 checking for ranlib... ranlib #11 6.740 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.821 checking for sysroot... no #11 6.821 checking for a working dd... /usr/bin/dd #11 6.827 checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 #11 6.850 checking for mt... no #11 6.851 checking if : is a manifest tool... no #11 6.857 checking for stdio.h... yes #11 6.877 checking for stdlib.h... yes #11 6.903 checking for string.h... yes #11 6.928 checking for inttypes.h... yes #11 6.955 checking for stdint.h... yes #11 6.983 checking for strings.h... yes #11 7.012 checking for sys/stat.h... yes #11 7.040 checking for sys/types.h... yes #11 7.070 checking for unistd.h... yes #11 7.099 checking for dlfcn.h... yes #11 7.130 checking for objdir... .libs #11 7.193 checking if gcc supports -fno-rtti -fno-exceptions... no #11 7.221 checking for gcc option to produce PIC... -fPIC -DPIC #11 7.221 checking if gcc PIC flag -fPIC -DPIC works... yes #11 7.249 checking if gcc static flag -static works... yes #11 7.316 checking if gcc supports -c -o file.o... yes #11 7.354 checking if gcc supports -c -o file.o... (cached) yes #11 7.354 checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes #11 7.367 checking whether -lc should be explicitly linked in... no #11 7.401 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.469 checking how to hardcode library paths into programs... immediate #11 7.469 checking whether stripping libraries is possible... yes #11 7.472 checking if libtool supports shared libraries... yes #11 7.472 checking whether to build shared libraries... yes #11 7.472 checking whether to build static libraries... yes #11 7.473 checking for pkg-config... /usr/bin/pkg-config #11 7.473 checking for pkg-config... /usr/bin/pkg-config #11 7.473 checking pkg-config is at least version 0.20... yes #11 7.475 checking for libosmocore >= 1.10.0... yes #11 7.486 checking for libosmovty >= 1.10.0... yes #11 7.499 checking for libosmoctrl >= 1.10.0... yes #11 7.509 checking for libosmogsm >= 1.10.0... yes #11 7.518 checking for libosmoabis >= 1.6.0... yes #11 7.530 checking for libosmo-netif >= 1.5.0... yes #11 7.541 checking for libosmo-sigtran >= 1.9.0... no #11 7.553 configure: error: Package requirements (libosmo-sigtran >= 1.9.0) were not met: #11 7.553 #11 7.553 Package dependency requirement 'libosmo-sigtran >= 1.9.0' could not be satisfied. #11 7.553 Package 'libosmo-sigtran' has version '1.8.0.67-fb30.202407242026', required version is '>= 1.9.0' #11 7.553 #11 7.553 Consider adjusting the PKG_CONFIG_PATH environment variable if you #11 7.553 installed software in a non-standard prefix. #11 7.553 #11 7.553 Alternatively, you may set the environment variables LIBOSMOSIGTRAN_CFLAGS #11 7.553 and LIBOSMOSIGTRAN_LIBS to avoid the need to call pkg-config. #11 7.553 See the pkg-config man page for more details. #11 ERROR: process "/bin/sh -c cd osmo-bsc && \tgit fetch && git checkout $OSMO_BSC_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BSC_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 1 ------ > [6/8] RUN CD osmo-bsc && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install: 7.553 7.553 Package dependency requirement 'libosmo-sigtran >= 1.9.0' could not be satisfied. 7.553 Package 'libosmo-sigtran' has version '1.8.0.67-fb30.202407242026', required version is '>= 1.9.0' 7.553 7.553 Consider adjusting the PKG_CONFIG_PATH environment variable if you 7.553 installed software in a non-standard prefix. 7.553 7.553 Alternatively, you may set the environment variables LIBOSMOSIGTRAN_CFLAGS 7.553 and LIBOSMOSIGTRAN_LIBS to avoid the need to call pkg-config. 7.553 See the pkg-config man page for more details. ------ Dockerfile:42 -------------------- 41 | 42 | >>> RUN cd osmo-bsc && \ 43 | >>> git fetch && git checkout $OSMO_BSC_BRANCH && \ 44 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BSC_BRANCH || exit 1); \ 45 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 46 | >>> autoreconf -fi && \ 47 | >>> ./configure && \ 48 | >>> make "-j$(nproc)" install 49 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-bsc && \tgit fetch && git checkout $OSMO_BSC_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BSC_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test-io_uring/ws/osmo-bsc…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: Osmocom_OBS_master #62381
by jenkins＠lists.osmocom.org 25 Jul '24

25 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/62381/display/re…> Changes: ------------------------------------------ Started by upstream project "master-osmo-msc" build number 44679 originally caused by: Started by upstream project "master-osmo-iuh" build number 16972 originally caused by: Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 3633d1f62e9615549a7fd32056f6b544825019dd (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 3633d1f62e9615549a7fd32056f6b544825019dd # timeout=10 Commit message: "jobs/update-osmo-…: only trigger container rebuild" > git rev-list --no-walk 3633d1f62e9615549a7fd32056f6b544825019dd # timeout=10 [Osmocom_OBS_master] $ /bin/sh -xe /tmp/jenkins9206731692901805145.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version --docker --feed master --meta osmocom:master docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…']> #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from build_srcpkg.Dockerfile #2 transferring dockerfile: 561B done #2 DONE 0.1s #3 [internal] load metadata for docker.io/library/debian:12 #3 DONE 0.4s #4 [1/3] FROM docker.io/library/debian:12@sha256:45f2e735295654f13e3be10da2a6892c708f71a71be845818f6058982761a6d3 #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:cc6fbc6e9775ae8e427b4d1b001dc40c85451349aae4fc36e601a749eaa59a8f done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg 0.0s done #7 DONE 0.0s docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:master ### Building source packages ### osmocom-master: getting OBS version osmocom-master: skipping (1.0.0 is up-to-date) erlang/osmo_dia2gsup: getting head from git remote for master erlang/osmo_dia2gsup: getting OBS version erlang/osmo_dia2gsup: skipping (2730247a824cb0561bbc5024e4a42e404b51f5d9 is up-to-date) erlang/osmo-epdg: getting head from git remote for master erlang/osmo-epdg: getting OBS version erlang/osmo-epdg: skipping (1b7038b8ff204008160a998525a7dff2e38de51d is up-to-date) gapk: getting head from git remote for master gapk: getting OBS version gapk: skipping (4b1abf3959a2e671deff3477ade2a72d8feae4bf is up-to-date) libasn1c: getting head from git remote for master libasn1c: getting OBS version libasn1c: skipping (de520a417a95f47ec13b895b7c129d2969b791d7 is up-to-date) libgtpnl: getting head from git remote for master libgtpnl: getting OBS version libgtpnl: skipping (33afef9794cd44541d7e337a89830cd83f6611e4 is up-to-date) libosmo-abis: getting head from git remote for master libosmo-abis: getting OBS version libosmo-abis: skipping (4bd83dfd71afaf81e826febf79e63dd06abe73a3 is up-to-date) libosmo-dsp: getting head from git remote for master libosmo-dsp: getting OBS version libosmo-dsp: skipping (912827c9da7def5069d88a3327aca018d339be62 is up-to-date) libosmo-gprs: getting head from git remote for master libosmo-gprs: getting OBS version libosmo-gprs: skipping (b226fd2702de34f4d43bb18f2d58272814f7cc8a is up-to-date) libosmo-netif: getting head from git remote for master libosmo-netif: getting OBS version libosmo-netif: skipping (7add8d791eff4cfa2317c0c05bf516fda1591bd1 is up-to-date) libosmo-pfcp: getting head from git remote for master libosmo-pfcp: getting OBS version libosmo-pfcp: skipping (c7ff5ab7a8e4a8089385b130fd4575f3cf4e50b9 is up-to-date) libosmo-sccp: getting head from git remote for master libosmo-sccp: getting OBS version libosmo-sccp: skipping (428ea8407844f3313ce611365bffaaa7656c540a is up-to-date) libosmocore: getting head from git remote for master libosmocore: getting OBS version libosmocore: skipping (11af846dc3afdeaec8c85283502d8ebcc9d282c9 is up-to-date) libsmpp34: getting head from git remote for master libsmpp34: getting OBS version libsmpp34: skipping (f1ec51db83de0d20b5ad0f88756016f289d5d268 is up-to-date) libusrp: getting head from git remote for master libusrp: getting OBS version libusrp: skipping (b125637fdff2b8f4552aaddf767fae5a2d26666a is up-to-date) osmo-bsc: getting head from git remote for master osmo-bsc: getting OBS version osmo-bsc: skipping (8f6f82038d15100cfd8e78e4336077e2c0567f52 is up-to-date) osmo-bsc-nat: getting head from git remote for master osmo-bsc-nat: getting OBS version osmo-bsc-nat: skipping (77c875491c9c38dea8400bc2ecc3a9b30dac0d6e is up-to-date) osmo-bts: getting head from git remote for master osmo-bts: getting OBS version osmo-bts: skipping (2d9643f2cec6191c25ac36a74ff24bb7da63b3f8 is up-to-date) osmo-cbc: getting head from git remote for master osmo-cbc: getting OBS version osmo-cbc: skipping (637874eaf9a05490fe50217b972a016158055a5f is up-to-date) osmo-e1d: getting head from git remote for master osmo-e1d: getting OBS version osmo-e1d: skipping (e11e77868a96f3bcec436ed5ccc34824b60dc6f1 is up-to-date) osmo-fl2k: getting head from git remote for master osmo-fl2k: getting OBS version osmo-fl2k: skipping (6c81d75b49c57e0661ce8e6c16ae49e420e62e2e is up-to-date) osmo-gbproxy: getting head from git remote for master osmo-gbproxy: getting OBS version osmo-gbproxy: skipping (c8113ce75a4278254ff64142da46df32eb95e437 is up-to-date) osmo-ggsn: getting head from git remote for master osmo-ggsn: getting OBS version osmo-ggsn: skipping (561a9bc77ce21c5a6134315aa539b5f8b50aedd8 is up-to-date) osmo-gsm-manuals: getting head from git remote for master osmo-gsm-manuals: getting OBS version osmo-gsm-manuals: skipping (4527acf936dc732b450bd73d95cd72a950ab5c67 is up-to-date) osmo-hlr: getting head from git remote for master osmo-hlr: getting OBS version osmo-hlr: skipping (c819234a42af5f0c6a9114b605ff8365e89d770d is up-to-date) osmo-hnbgw: getting head from git remote for master osmo-hnbgw: getting OBS version osmo-hnbgw: skipping (610aae4d6527107b1624fb635d019a9ffa1dd6e9 is up-to-date) osmo-hnodeb: getting head from git remote for master osmo-hnodeb: getting OBS version osmo-hnodeb: skipping (cb5e0bf436b7e0a0870e96ff306d653716a03cdf is up-to-date) osmo-iuh: getting head from git remote for master osmo-iuh: getting OBS version osmo-iuh: skipping (bb71c57a9ca42f74ef8d6a4fe56bef962352671c is up-to-date) osmo-mgw: getting head from git remote for master osmo-mgw: getting OBS version osmo-mgw: skipping (f1b557988db61bb501db82793d7623ed7bd2d39f is up-to-date) osmo-msc: getting head from git remote for master osmo-msc: getting OBS version osmo-msc: skipping (22d4f356462f2d0872e2454c33b2b9fff4603c61 is up-to-date) osmo-pcap: getting head from git remote for master osmo-pcap: getting OBS version osmo-pcap: skipping (bcb3b1b073d192674adc7285c7e928ede3f4e86c is up-to-date) osmo-pcu: getting head from git remote for master osmo-pcu: getting OBS version osmo-pcu: skipping (439d0c3c7b2048988590e661949af1dba81ddd35 is up-to-date) osmo-remsim: getting head from git remote for master osmo-remsim: getting OBS version osmo-remsim: skipping (5b8a2e93b47bee1251704a584f786c0d45c60d4b is up-to-date) osmo-sgsn: getting head from git remote for master osmo-sgsn: getting OBS version osmo-sgsn: skipping (bea6a0ffb566eb1172d748e09cdd1778c72d8fd3 is up-to-date) osmo-sip-connector: getting head from git remote for master osmo-sip-connector: getting OBS version osmo-sip-connector: skipping (7a3532e0eb07fe26b21af3a15e0c03da7b5e3f8f is up-to-date) osmo-smlc: getting head from git remote for master osmo-smlc: getting OBS version ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://obs.osmocom.org', 'list', 'osmocom:master', 'osmo-smlc'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 504: Gateway Time-out Request: https://obs.osmocom.org/source/osmocom:master/osmo-smlc?rev=latest Headers: Server: nginx Date: Thu, 25 Jul 2024 10:58:25 GMT Content-Type: text/html Content-Length: 160 Connection: close *** python trace *** Traceback (most recent call last): File "/obs/update_obs_project.py", line 263, in <module> main() File "/obs/update_obs_project.py", line 257, in main build_srcpkgs(pkgs_remote, packages) File "/obs/update_obs_project.py", line 149, in build_srcpkgs build_srcpkg_if_needed(pkgs_remote, package, False) File "/obs/update_obs_project.py", line 113, in build_srcpkg_if_needed obs_version = lib.osc.get_package_version(package) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 70, in get_package_version ret = run_osc(["list", proj, os.path.basename(package)]) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 1

Jenkins build became unstable: ttcn3-asterisk-ims-ue-test #143
by jenkins＠lists.osmocom.org 25 Jul '24

25 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/143/disp…>

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications July 2024