Thanks a lot Sukchan,
I'll test this week!
Rafael Diniz
On 8/2/19 7:05 PM, Sukchan Lee wrote:
Hi Rafael,
In the NextEPC, there are two ways to specify peers. 'addr' sets the IP address, and 'name' sets the hostname. So, if your network is configured to look up the VLR as a hostname, you can use 'name'.
'port' was just made for testing. If you want to use a different port without using standard 29118, you can put 'port' number.
By the way, I've changed how to configure CS Fallback & SMS as below.
# o Single MSC/VLR(127.0.0.2) sgsap: addr: 127.0.0.2 map: tai: plmn_id: mcc: 001 mnc: 01 tac: 4130 lai: plmn_id: mcc: 001 mnc: 01 lac: 43690 map: tai: plmn_id: mcc: 002 mnc: 02 tac: 4132 lai: plmn_id: mcc: 002 mnc: 02 lac: 43692
# o Multiple MSC/VLR sgsap: - addr: 127.0.0.2 port: 29119 map: tai: plmn_id: mcc: 001 mnc: 01 tac: 4131 lai: plmn_id: mcc: 001 mnc: 01 lac: 43691 map: tai: plmn_id: mcc: 002 mnc: 02 tac: 4132 lai: plmn_id: mcc: 002 mnc: 02 lac: 43692 - addr - 127.0.0.3 - fe80::2%lo map: tai: plmn_id: mcc: 001 mnc: 01 tac: 4132 lai: plmn_id: mcc: 002 mnc: 02 lac: 43692 - name: msc.open5gs.org http://msc.open5gs.org map: tai: plmn_id: mcc: 001 mnc: 01 tac: 4133 lai: plmn_id: mcc: 002 mnc: 02 lac: 43693
Thanks a lot!
Best Regards, Sukchan
On Sat, Aug 3, 2019 at 6:45 AM Rafael Diniz <rafael@rhizomatica.org mailto:rafael@rhizomatica.org> wrote:
Hi all, Just a small question - what is the meaning of the "name" field in the sgsap configuration? Thanks, Rafael Diniz On 7/19/19 5:51 PM, Rafael Diniz wrote: > Obrigado Romeu! > > On 7/19/19 4:58 PM, Romeu Medeiros wrote: >> Hello Rafael >> >> I just configure the NextEPC to connect via SGS to OSMO-MSC, like this: >> >> sgsap: >> addr: 127.0.0.1 >> port: 29118 >> name: vlr.example.net <http://vlr.example.net> <http://vlr.example.net> >> tai: >> plmn_id: >> mcc: 724 >> mnc: 21 >> tac: 12345 >> lai: >> plmn_id: >> mcc: 724 >> mnc: 4 >> lac: 51544 >> >> And the configuration in the MSC: >> >> sgs >> local-port 29118 >> local-ip 0.0.0.0 >> vlr-name vlr.example.net <http://vlr.example.net> <http://vlr.example.net> >> >> And configure the IMSI in the Osmo-HLR and NextEPC-HSS >> >> If you need more help tell me. >> >> >> Thanks >> >> Romeu Medeiros >> >> >> And >> >> On Fri, Jul 19, 2019 at 1:31 PM Rafael Diniz <rafael@rhizomatica.org <mailto:rafael@rhizomatica.org> >> <mailto:rafael@rhizomatica.org <mailto:rafael@rhizomatica.org>>> wrote: >> >> Hi all, >> >> I'd also like to test SMS and CSFB in LTE. I have some experience with >> the Osmocom GSM stack, but not much with the NextEPC LTE. Could you >> point me which fields should I set in the configuration files? >> >> Thanks, >> Rafael Diniz >> >> On 7/13/19 6:35 PM, Romeu Medeiros wrote: >> > Hello Sukchan and friends. >> > >> > I'm trying to use the CSFB in test lab, and every time that >> nextepc send >> > the UEContextModificationRequest, the UE respond with an >> > UEContextModificationFaliure [ Protocol-cause=semantic-error ]. >> > >> > image.png >> > >> > I'm looking why I'm getting this. Someone have any idea? >> > >> > Thanks >> > >> > Romeu Medeiros >> > >> > On Thu, Jul 11, 2019 at 12:15 PM Sukchan Lee <acetcom@gmail.com <mailto:acetcom@gmail.com> >> <mailto:acetcom@gmail.com <mailto:acetcom@gmail.com>> >> > <mailto:acetcom@gmail.com <mailto:acetcom@gmail.com> <mailto:acetcom@gmail.com <mailto:acetcom@gmail.com>>>> wrote: >> > >> > Dear Osmocom & NextEPC Community, >> > >> > Today I've added CS Fallback and released NextEPC v0.5.0 >> > >> > So, I'd just like to test this part with Osmocom project, but it >> > seems to be a difficult task. The reason is why I have little >> > knowledge about 2G/3G. Nevertheless, I will try to do it >> > >> > BTW, I don't know if there is anyone who wants to integrate >> this big >> > thing. >> > Even though I'm not sure if this will help, but let me >> introduce the >> > configuration of the NextEPC. >> > >> > To use SGsAP, change the mme.conf as follows: >> > >> > # >> > # <sgsap> >> > # >> > # o Single MSC/VLR >> > # sgsap: >> > # addr: 127.0.0.2 >> > # plmn_id: >> > # mcc: 001 >> > # mnc: 01 >> > # tac: 4130 >> > # lac: 43690 >> > # >> > # o Multiple MSC/VLR >> > # sgsap: >> > # - addr: 127.0.0.2 >> > # plmn_id: >> > # mcc: 001 >> > # mnc: 01 >> > # tac: 4131 >> > # lac: 43692 >> > # - addr >> > # - 127.0.0.3 >> > # - fe80::2%lo0 >> > # plmn_id: >> > # mcc: 001 >> > # mnc: 01 >> > # tac: 4132 >> > # lac: 43692 >> > # - name: msc.open5gs.org <http://msc.open5gs.org> <http://msc.open5gs.org> >> <http://msc.open5gs.org> >> > # plmn_id: >> > # mcc: 001 >> > # mnc: 01 >> > # tac: 4133 >> > # lac: 43693 >> > # >> > >> > FYI, I also attach the pcap that I run with nextepc simulator >> as below. >> > >> > $ ./tests/testcsfb >> > mo-idle-test : SUCCESS >> > mt-idle-test : SUCCESS >> > mo-active-test : SUCCESS >> > mt-active-test : SUCCESS >> > All tests passed. >> > >> > Feel free to raise any questions about this things. >> > >> > Best Regards, >> > Sukchan >> > >> >