Hi In my project, I'm using IP address as 55.55.0.25/16 in nextepc.conf My tunnel inet gets 55.55.0.25 , mask is 255.255.0.0 IP address for my route from the pool is 55.55.0.1. Why is this happening? I want my route to start from 55.55.0.26 and so on... how to do this? please help -- Murali.S

Thank you for your response. I'll try other way. On Thu, 7 Nov, 2019, 6:23 PM 이석찬, <acetcom(a)gmail.com> wrote: > Hi Murali, > > Unfortunately, open5gs(nextepc) does not support the range of the ip pool. > As such, it is not possible at this time. > > Let me paste the related source code regarding the issue. > > Sorry for not being help this. > > Best regards, > Sukchan > > > > --------------------------------------------------------------------------------------------- > In src/pgw/pgw-context.c, pgw_ue_pool_generate(), line 1207 > > /* Exclude Network Address */ > if (memcmp(ue_ip->addr, subnet->sub.sub, maxbytes) == 0) > continue; > > /* Exclude Broadcast Address */ > if (memcmp(ue_ip->addr, broadcast, maxbytes) == 0) continue; > > /* Exclude TUN IP Address */ > if (memcmp(ue_ip->addr, subnet->gw.sub, maxbytes) == 0) > continue; > > > > > On Thu, Nov 7, 2019 at 4:42 PM Murali Sb <murali07smile(a)gmail.com> wrote: > >> Hi >> >> In my project, I'm using IP address as 55.55.0.25/16 in nextepc.conf >> My tunnel inet gets 55.55.0.25 , mask is 255.255.0.0 >> IP address for my route from the pool is 55.55.0.1. >> Why is this happening? >> >> I want my route to start from 55.55.0.26 and so on... >> >> how to do this? please help >> >> >> -- >> Murali.S >> >