You're not running in a VM, are you? What hardware is this on? Loki On Sun, Jul 3, 2011 at 9:55 PM, eisencah eisenach <wbg_1000@yahoo.com>wrote:
Try shutting off the graphical interface of the OS and run the tools from the consoles. Cheers, Mihai.
--- On *Sun, 7/3/11, Raz Sharif <issertiv@gmail.com>* wrote:
From: Raz Sharif <issertiv@gmail.com> Subject: Re: Please can anyone advise me - FMTOOL Error and no further processing To: "OSMoCom Baseband Devel" <baseband-devel@lists.osmocom.org> Date: Sunday, July 3, 2011, 10:53 PM
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply All.
I will continue to read up some more to eliminate the issues and currently I have no idea what is the problem. Cable T191 or C115 or a Timing issue with the Software that prevents me from getting past the first PROMPT! and FMT Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet <squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
wrote:
Please do not use reply in gmail, but reply to all instead. Otherwise you will only write to the message's author,
Sebastien
---------- Forwarded message ---------- From: *Raz Sharif* <issertiv@gmail.com<http://mc/compose?to=issertiv@gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM Subject: Re: Please can anyone advise me - FMTOOL Error and no further processing To: Sébastien Lorquet <squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Sorry yes i did post this message before in an attempt to get some better insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error. So i am a little stuck to be honest. Sorry for sending this twice.
Thanks Raz On 3 Jul 2011 19:29, "Sébastien Lorquet" <squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>> wrote: