3 Jul
2011
3 Jul
'11
9:45 p.m.
Please do not use reply in gmail, but reply to all instead. Otherwise you
will only write to the message's author,
Sebastien
---------- Forwarded message ----------
From: Raz Sharif <issertiv(a)gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: Sébastien Lorquet <squalyl(a)gmail.com>
Sorry yes i did post this message before in an attempt to get some better
insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet" <squalyl(a)gmail.com> wrote:
3 Jul
3 Jul
9:53 p.m.
New subject: Please can anyone advise me - FMTOOL Error and no further processing
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply
All.
I will continue to read up some more to eliminate the issues and currently I
have no idea what is the problem. Cable T191 or C115 or a Timing issue with
the Software that prevents me from getting past the first PROMPT! and FMT
Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet <squalyl(a)gmail.com> wrote:
Please do not use reply in gmail, but reply to all
instead. Otherwise you
will only write to the message's author,
Sebastien
---------- Forwarded message ----------
From: Raz Sharif <issertiv(a)gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: Sébastien Lorquet <squalyl(a)gmail.com>
Sorry yes i did post this message before in an attempt to get some better
insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet" <squalyl(a)gmail.com> wrote:
4 Jul
4 Jul
6:55 a.m.
New subject: Please can anyone advise me - FMTOOL Error and no further processing
Try shutting off the graphical interface of the OS and run the tools from the consoles.
Cheers,
Mihai.
--- On Sun, 7/3/11, Raz Sharif <issertiv(a)gmail.com> wrote:
From: Raz Sharif <issertiv(a)gmail.com>
Subject: Re: Please can anyone advise me - FMTOOL Error and no further processing
To: "OSMoCom Baseband Devel" <baseband-devel(a)lists.osmocom.org>
Date: Sunday, July 3, 2011, 10:53 PM
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply All.
I will continue to read up some more to eliminate the issues and currently I have no idea
what is the problem. Cable T191 or C115 or a Timing issue with the Software that prevents
me from getting past the first PROMPT! and FMT Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet <squalyl(a)gmail.com> wrote:
Please do not use reply in gmail, but reply to all instead. Otherwise you will only write
to the message's author,
Sebastien
---------- Forwarded message ----------
From: Raz Sharif <issertiv(a)gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further processing
To: Sébastien Lorquet <squalyl(a)gmail.com>
Sorry yes i did post this message before in an attempt to get some better insight in to
the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet" <squalyl(a)gmail.com> wrote:
7:09 a.m.
New subject: Please can anyone advise me - FMTOOL Error and no further processing
You're not running in a VM, are you?
What hardware is this on?
Loki
On Sun, Jul 3, 2011 at 9:55 PM, eisencah eisenach <wbg_1000(a)yahoo.com>wrote;wrote:
Try shutting off the graphical interface of the OS and
run the tools from
the consoles.
Cheers,
Mihai.
--- On *Sun, 7/3/11, Raz Sharif <issertiv(a)gmail.com>* wrote:
From: Raz Sharif <issertiv(a)gmail.com>
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: "OSMoCom Baseband Devel" <baseband-devel(a)lists.osmocom.org>
Date: Sunday, July 3, 2011, 10:53 PM
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply
All.
I will continue to read up some more to eliminate the issues and currently
I have no idea what is the problem. Cable T191 or C115 or a Timing issue
with the Software that prevents me from getting past the first PROMPT! and
FMT Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: Sébastien Lorquet
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Sorry yes i did post this message before in an attempt to get some better
insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet"
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>>
wrote:
wrote:
Please do not use reply in gmail, but reply to all instead. Otherwise you
will only write to the message's author,
Sebastien
---------- Forwarded message ----------
From: *Raz Sharif* <issertiv@gmail.com<http://mc/compose?to=issertiv@gmail.com>
8:39 a.m.
New subject: Please can anyone advise me - FMTOOL Error and no further processing
Thanks for the reply. No I am not using VM of any sort. straight Ubuntu
workstation. latest release from their Website. ISO installed and OsmocommBB
compiled. Using the testing branch of OsmocomBB.
Hardware is Dell Optiplex dual core 1 TB HD and 6GB Ram. It is a pretty fast
PC to be honest and works with most of the stuff i Use.
Cable is a T191 USB to 2.5mm Cable prolific.2303 chipset.
lsusb shows the cable as Prolific.
Rubbing fingers on the tip of the cable shows some characters so it seem to
work but I may be wrong.
Phone is a C115 Motorola from Ebay it works fine with a SIM and is just
another phone to all intents and purposes.
So I was going to try the FTDI USB cable today with the USB-RS32 convertor
which is a pain but i kind of guessed by eliminating that it then is the
phone or the Software and given that many folks had Cables issues that was
the way to go.
Any Ideas from fellow Osmocommers out there ?? :)
Thanks folks,
Raz
On Mon, Jul 4, 2011 at 6:09 AM, Lokkju Brennr <lokkju(a)gmail.com> wrote:
You're not running in a VM, are you?
What hardware is this on?
Loki
On Sun, Jul 3, 2011 at 9:55 PM, eisencah eisenach <wbg_1000(a)yahoo.com>wrote;wrote:
Try shutting off the graphical interface of the
OS and run the tools from
the consoles.
Cheers,
Mihai.
--- On *Sun, 7/3/11, Raz Sharif <issertiv(a)gmail.com>* wrote:
From: Raz Sharif <issertiv(a)gmail.com>
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: "OSMoCom Baseband Devel" <baseband-devel(a)lists.osmocom.org>
Date: Sunday, July 3, 2011, 10:53 PM
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply
All.
I will continue to read up some more to eliminate the issues and currently
I have no idea what is the problem. Cable T191 or C115 or a Timing issue
with the Software that prevents me from getting past the first PROMPT! and
FMT Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: Sébastien Lorquet
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Sorry yes i did post this message before in an attempt to get some better
insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet"
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>>
wrote:
wrote:
Please do not use reply in gmail, but reply to all instead. Otherwise you
will only write to the message's author,
Sebastien
---------- Forwarded message ----------
From: *Raz Sharif* <issertiv@gmail.com<http://mc/compose?to=issertiv@gmail.com>
8:42 a.m.
New subject: Please can anyone advise me - FMTOOL Error and no further processing
What carrier was the phone for? Sometimes there is custom/odd firmware on
them - for instance, it was very tricky getting my tracfone c139s working.
Loki
On Jul 3, 2011, at 11:39 PM, Raz Sharif <issertiv(a)gmail.com> wrote:
Thanks for the reply. No I am not using VM of any sort. straight Ubuntu
workstation. latest release from their Website. ISO installed and OsmocommBB
compiled. Using the testing branch of OsmocomBB.
Hardware is Dell Optiplex dual core 1 TB HD and 6GB Ram. It is a pretty fast
PC to be honest and works with most of the stuff i Use.
Cable is a T191 USB to 2.5mm Cable prolific.2303 chipset.
lsusb shows the cable as Prolific.
Rubbing fingers on the tip of the cable shows some characters so it seem to
work but I may be wrong.
Phone is a C115 Motorola from Ebay it works fine with a SIM and is just
another phone to all intents and purposes.
So I was going to try the FTDI USB cable today with the USB-RS32 convertor
which is a pain but i kind of guessed by eliminating that it then is the
phone or the Software and given that many folks had Cables issues that was
the way to go.
Any Ideas from fellow Osmocommers out there ?? :)
Thanks folks,
Raz
On Mon, Jul 4, 2011 at 6:09 AM, Lokkju Brennr <lokkju(a)gmail.com> wrote:
You're not running in a VM, are you?
What hardware is this on?
Loki
On Sun, Jul 3, 2011 at 9:55 PM, eisencah eisenach <wbg_1000(a)yahoo.com>wrote;wrote:
Try shutting off the graphical interface of the
OS and run the tools from
the consoles.
Cheers,
Mihai.
--- On *Sun, 7/3/11, Raz Sharif <issertiv(a)gmail.com>* wrote:
From: Raz Sharif <issertiv(a)gmail.com>
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: "OSMoCom Baseband Devel" <baseband-devel(a)lists.osmocom.org>
Date: Sunday, July 3, 2011, 10:53 PM
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply
All.
I will continue to read up some more to eliminate the issues and currently
I have no idea what is the problem. Cable T191 or C115 or a Timing issue
with the Software that prevents me from getting past the first PROMPT! and
FMT Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: Sébastien Lorquet
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>
Sorry yes i did post this message before in an attempt to get some better
insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet"
<squalyl@gmail.com<http://mc/compose?to=squalyl@gmail.com>>
wrote:
wrote:
Please do not use reply in gmail, but reply to all instead. Otherwise you
will only write to the message's author,
Sebastien
---------- Forwarded message ----------
From: *Raz Sharif* <issertiv@gmail.com<http://mc/compose?to=issertiv@gmail.com>
9:33 a.m.
New subject: Please can anyone advise me - FMTOOL Error and no further processing
Well put my T-Mobile SIM in the C115 and it worked fine as a phone SMS etc.
unlocked for all Networks I think.
Thanks for the reply.
Raz
On Mon, Jul 4, 2011 at 7:42 AM, Lokkju Brennr <lokkju(a)gmail.com> wrote:
What carrier was the phone for? Sometimes there is
custom/odd firmware on
them - for instance, it was very tricky getting my tracfone c139s working.
Loki
On Jul 3, 2011, at 11:39 PM, Raz Sharif <issertiv(a)gmail.com> wrote:
Thanks for the reply. No I am not using VM of any sort. straight Ubuntu
workstation. latest release from their Website. ISO installed and OsmocommBB
compiled. Using the testing branch of OsmocomBB.
Hardware is Dell Optiplex dual core 1 TB HD and 6GB Ram. It is a pretty
fast PC to be honest and works with most of the stuff i Use.
Cable is a T191 USB to 2.5mm Cable prolific.2303 chipset.
lsusb shows the cable as Prolific.
Rubbing fingers on the tip of the cable shows some characters so it seem to
work but I may be wrong.
Phone is a C115 Motorola from Ebay it works fine with a SIM and is just
another phone to all intents and purposes.
So I was going to try the FTDI USB cable today with the USB-RS32 convertor
which is a pain but i kind of guessed by eliminating that it then is the
phone or the Software and given that many folks had Cables issues that was
the way to go.
Any Ideas from fellow Osmocommers out there ?? :)
Thanks folks,
Raz
On Mon, Jul 4, 2011 at 6:09 AM, Lokkju Brennr < <lokkju(a)gmail.com>
lokkju(a)gmail.com> wrote:
You're not running in a VM, are you?
What hardware is this on?
Loki
On Sun, Jul 3, 2011 at 9:55 PM, eisencah eisenach < <wbg_1000(a)yahoo.com>
wbg_1000(a)yahoo.com> wrote:
Try shutting off the graphical interface of the
OS and run the tools from
the consoles.
Cheers,
Mihai.
--- On *Sun, 7/3/11, Raz Sharif < <issertiv@gmail.com>issertiv@gmail.com
* wrote:
From: Raz Sharif < <issertiv@gmail.com>issertiv@gmail.com>
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: "OSMoCom Baseband Devel" < <baseband-devel(a)lists.osmocom.org>
baseband-devel(a)lists.osmocom.org>
Date: Sunday, July 3, 2011, 10:53 PM
Apologies for that!
In my haste for a resolution of the issue i selected Reply and not Reply
All.
I will continue to read up some more to eliminate the issues and
currently I have no idea what is the problem. Cable T191 or C115 or a Timing
issue with the Software that prevents me from getting past the first PROMPT!
and FMT Tool Error.
Thanks all.
Raz
On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet
<<http://mc/compose?to=squalyl@gmail.com>
squalyl(a)gmail.com> wrote:
Please do not use reply in gmail, but reply to all instead. Otherwise you
will only write to the message's author,
Sebastien
---------- Forwarded message ----------
From: *Raz Sharif* < <http://mc/compose?to=issertiv@gmail.com>
issertiv(a)gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further
processing
To: Sébastien Lorquet < <http://mc/compose?to=squalyl@gmail.com>
squalyl(a)gmail.com>
Sorry yes i did post this message before in an attempt to get some better
insight in to the issues.
The loopback test i shorted the inside and outermost pins and echo of
characters appeared. I think cable is ok. Its a prolific usb to serial.
I do not have a serial connector so cannot try the FTD cable option.
All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.
Thanks
Raz
On 3 Jul 2011 19:29, "Sébastien Lorquet"
<<http://mc/compose?to=squalyl@gmail.com>
squalyl(a)gmail.com> wrote:
4704
days inactive
4705
days old
baseband-devel@lists.osmocom.org
6 comments
4 participants
participants (4)
-
eisencah eisenach -
Lokkju Brennr -
Raz Sharif -
Sébastien Lorquet