Loki

On Sun, Jul 3, 2011 at 9:55 PM, eisencah eisenach <wbg_1000@yahoo.com> wrote:

Try shutting off the graphical interface of the OS and run the tools from the consoles.
Cheers,
Mihai.

--- On Sun, 7/3/11, Raz Sharif <issertiv@gmail.com> wrote:

From: Raz Sharif <issertiv@gmail.com>
Subject: Re: Please can anyone advise me - FMTOOL Error and no further processing

To: "OSMoCom Baseband Devel" <baseband-devel@lists.osmocom.org>
Date: Sunday, July 3, 2011, 10:53 PM

Apologies for that!

In my haste for a resolution of the issue i selected Reply and not Reply All.

I will continue to read up some more to eliminate the issues and currently I have no idea what is the problem. Cable T191 or C115 or a Timing issue with the Software that prevents me from getting past the first PROMPT! and FMT Tool Error.

Thanks all.

Raz

On Sun, Jul 3, 2011 at 8:45 PM, Sébastien Lorquet <squalyl@gmail.com> wrote:

Please do not use reply in gmail, but reply to all instead. Otherwise you will only write to the message's author,

Sebastien

---------- Forwarded message ----------
From: Raz Sharif <issertiv@gmail.com>
Date: Sun, Jul 3, 2011 at 9:34 PM
Subject: Re: Please can anyone advise me - FMTOOL Error and no further processing
To: Sébastien Lorquet <squalyl@gmail.com>

Sorry yes i did post this message before in an attempt to get some better insight in to the issues.

The loopback test i shorted the inside and outermost pins and echo of characters appeared. I think cable is ok. Its a prolific usb to serial.

I do not have a serial connector so cannot try the FTD cable option.

All software looks ok but the Osmocon.just hangs and FMT tool error.
So i am a little stuck to be honest.
Sorry for sending this twice.

Thanks
Raz

On 3 Jul 2011 19:29, "Sébastien Lorquet" <squalyl@gmail.com> wrote: