On 4/8/22 08:28, msfu wrote:
opening file: No such file or directory
This line clearly indicates that the firmware image you're trying to
load does not exist at the given location. Are you sure the path is
correct? I suggest to try using the relative paths:
$ cd ~/osmocom/osmocom-bb/src/
$ host/osmocon/osmocon -m c123xor -p /dev/ttyUSB1 \
target/firmware/board/compal_e88/layer1.compalram.bin
Note that I removed the '-c', because it's only for the *highram*
images, while you're trying to load a *compalram* image.
Best regards,
Vadim.
--
- Vadim Yanitskiy <vyanitskiy at sysmocom.de>
http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte