Hi,
I'd like to build a test scenario for my thesis
based on a Motorola C123 and
a PLL such as this
http://search.digikey.com/us/en/products/ICS501MLFT/800-1036-1-ND/1916104
Like this, I'd feed the multiplied clock to a USRP1 to run OpenBTS reliably.
Would you help me choose the correct PLL if you understand the topic? I have
little experience with circuit design.
That PLL looks fine, should work AFAICT.
Maybe just check the clock levels at the C123 output. If it's 2.5v
logic you may need to manually bias the PLL clock input and AC feed
the clock.
Cheers,
Sylvain