Re: GSM 850 / PCS 1900 : PLEASE HELP NEEDED

Hi All, Thanks a lot Sylvain for your response. At least the SIM Reader can read the SIM information now. The Mobile outputs the following: IMEI, IMSI, ICCID, MCC, MNC,LAC and the KEY. But, the process returnes failure for SIM file at 0x6f40 and hangs while retrieving information for SIM file at to retrieve information in location 0x6f30. However, after making sure that the gsm-850 and pcs are enabled, running of the Osmocon without SIM still yield the same output I posted earlier with DCS as the reference band of the Mobile output. Running Osmocon with SIM: Osmocom Output: rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m c155 ../../target/firmware/board/compal_e99/layer1.compalram.bin got 7 bytes from modem, data looks like: 1b f6 02 00 41 01 40 ....A.@ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e99/layer1.compalram.bin): file_size=53804, hdr_len=4, dnload_len=53811 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/53811) handle_write(): 4096 bytes (8192/53811) handle_write(): 4096 bytes (12288/53811) handle_write(): 4096 bytes (16384/53811) handle_write(): 4096 bytes (20480/53811) handle_write(): 4096 bytes (24576/53811) handle_write(): 4096 bytes (28672/53811) handle_write(): 4096 bytes (32768/53811) handle_write(): 4096 bytes (36864/53811) handle_write(): 4096 bytes (40960/53811) handle_write(): 4096 bytes (45056/53811) handle_write(): 4096 bytes (49152/53811) handle_write(): 4096 bytes (53248/53811) handle_write(): 563 bytes (53811/53811) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! OSMOCOM Layer 1 (revision osmocon_v0.0.0-1111-ge838620) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: 7e570d2eb10393bb ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== Power up simcard: Assert DSP into Reset Releasing DSP from Reset Setting some dsp_api.ndb values Setting API NDB parameters DSP Download Status: 0x0001 DSP API Version: 0x0000 0x0000 Finishing download phase DSP Download Status: 0x0002 DSP API Version: 0x3606 0x0000 LOST 7019! SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22 SIM Request (5): a0 c0 00 00 22 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (5): a0 b0 00 00 0a Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 22 SIM Request (5): a0 c0 00 00 22 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 07 Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (5): a0 b0 00 00 09 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (5): a0 b0 00 00 0b Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22 SIM Request (5): a0 c0 00 00 22 Status 1: 90 00 LOST 1893! LOST 1857! SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 22 SIM Request (5): a0 c0 00 00 22 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (5): a0 b0 00 00 80 Status 1: 94 08 SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22 SIM Request (5): a0 c0 00 00 22 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 22 SIM Request (5): a0 c0 00 00 22 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (5): a0 b0 00 00 09 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (5): a0 b0 00 00 fc Osmocon hang at this point. Mobile Output: rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/layer23/src/mobile$ ./mobile -i 127.0.0.1 Copyright (C) 2008-2010 ... Contributions by ... License GPLv2+: GNU GPL version 2 or later &lt;http://gnu.org/licenses/gpl.html&gt; This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. <000f> sim.c:1206 init SIM client <0006> gsm48_cc.c:63 init Call Control <0001> gsm48_rr.c:5100 init Radio Ressource process <0005> gsm48_mm.c:1312 init Mobility Management process <0005> gsm48_mm.c:1035 Selecting PLMN SEARCH state, because no SIM. <0002> gsm322.c:5023 init PLMN process <0003> gsm322.c:5024 init Cell Selection process *** Warning: Mobile '1' has default IMEI: 000000000000000 This could relate your identitiy to other users with default IMEI. *** Mobile '1' initialized, please start phone now! VTY available on port 4247. <0005> subscriber.c:567 Requesting SIM file 0x2fe2 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:697 go MF <000f> sim.c:241 SELECT (file=0x3f00) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=34) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x2fe2) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:277 READ BINARY (offset=0 len=10) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:236 received ICCID #################### from SIM <0005> subscriber.c:567 Requesting SIM file 0x6f07 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:706 requested path is longer, go child DFgsm <000f> sim.c:241 SELECT (file=0x7f20) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=34) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x6f07) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:277 READ BINARY (offset=0 len=9) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:266 received IMSI ################ from SIM <0005> subscriber.c:567 Requesting SIM file 0x6f7e <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f7e) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:277 READ BINARY (offset=0 len=11) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:302 received LOCI from SIM (mcc=### mnc=### lac=##### ##) <0005> subscriber.c:567 Requesting SIM file 0x6f40 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:697 go MF <000f> sim.c:241 SELECT (file=0x3f00) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=34) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:706 requested path is longer, go child DFtelecom <000f> sim.c:241 SELECT (file=0x7f10) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=34) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x6f40) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:277 READ BINARY (offset=0 len=128) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=128 sw1=0x94 sw2=0x08) <000f> sim.c:952 command failed <000f> sim.c:151 sending result to callback function (type=1) <0005> subscriber.c:620 SIM reading failed, ignoring! <0005> subscriber.c:567 Requesting SIM file 0x6f20 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:697 go MF <000f> sim.c:241 SELECT (file=0x3f00) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=34) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:706 requested path is longer, go child DFgsm <000f> sim.c:241 SELECT (file=0x7f20) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=34) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x6f20) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:277 READ BINARY (offset=0 len=9) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:349 received KEY from SIM <0005> subscriber.c:567 Requesting SIM file 0x6f30 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:277 READ BINARY (offset=0 len=252) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) ###### are place holders for actual SIM information. Telnett Output: OsmocomBB# show running-config Current configuration: ! ! line vty no login ! gps device /dev/ttyACM0 gps baudrate default no gps enable ! no hide-default ! ms 1 layer2-socket /tmp/osmocom_l2 sap-socket /tmp/osmocom_sap sim reader network-selection-mode auto imei 000000000000000 0 imei-fixed no emergency-imsi no call-waiting no auto-answer no clip no clir tx-power auto no simulated-delay no stick location-updating neighbour-measurement codec full-speed prefer codec half-speed no abbrev support a5/1 a5/2 no p-gsm no e-gsm no r-gsm gsm-850 no dcs pcs class-900 4 class-850 4 class-dcs 1 class-pcs 1 channel-capability sdcch+tchf+tchh full-speech-v1 full-speech-v2 half-speech-v1 min-rxlev -106 dsc-max 90 no skip-max-per-band exit test-sim imsi 001010000000000 ki xor 00 00 00 00 00 00 00 00 00 00 00 00 no barred-access no rplmn hplmn-search foreign-country exit no shutdown exit ! end OsmocomBB# sim read 1 OsmocomBB# show ms 1 MS '1' is up, service is limited IMEI: 000000000000000 IMEISV: 0000000000000000 IMEI generation: fixed automatic network selection state: A6 no SIM inserted cell selection state: C6 any cell selection radio ressource layer state: idle mobility management layer state: MM idle, PLMN search OsmocomBB# show support Supported features of MS '1': Phase 2 mobile station R-GSM : disabled E-GSM : disabled P-GSM : disabled DCS 1800 : disabled GSM 850 : yes GSM 850 Class: 4 PCS 1900 : yes PCS Class : 1 GSM 480 : no GSM 450 : no CECS : no VGCS : no VBS : no SMS : no SS_IND : yes PS_CAP : no CMSP : no SoLSA : no LCSVA : no LOC_SERV : no A5/1 : yes A5/2 : yes A5/3 : no A5/4 : no A5/5 : no A5/6 : no A5/7 : no A5/1 : yes Channels : SDCCH + TCH/F + TCH/H Full-Rate V1 : yes Full-Rate V2 : yes Full-Rate V3 : no Half-Rate V1 : yes Half-Rate V3 : no Min RXLEV : -106 OsmocomBB# I disabled every other band except gsm-850 and pcs. I have been taken time reading through the source codes and tracking the process from one section to another. And at the same digging for information on techniques and protocols applied in the project. I hope I can just get the application runs to a level where I can use it to establish a call. Thanks to everyone. Best regards, Rasak -- View this message in context: http://baseband-devel.722152.n3.nabble.com/GSM-850-PCS-1900-PLEASE-HELP-NEE… Sent from the baseband-devel mailing list archive at Nabble.com.