20 Sep
2011
20 Sep
'11
4 a.m.
Hi All,
I have done all what I could in setting up the project and running of it as
indicated in the wiki and mailing list.
It has been over two weeks of trial and error of figuring out of what the
problem is that led me to this conclusion
that OsmocomBB project might not be designed optimally for US GSM Bands (GSM
850/ PCS 1900). The system
could not get synchronised to a frequency when FSBS request is carried out.
I read from the mailing-list about the possible modification to be done on
the file rffe_dualband.c for GSM band in US in order to resolve the issue of
synchronisation. I made a changed of DCS 1800 to PCS 1900 and yet the output
remain the same with no difference.
Perhaps, I am still overlooking a possible detail that might make the MS not
synchronising. However the power measure is of average -90dBm which I think
might be too low for required level. If there can be anyone with any clue to
resolve or shed more light on this issue I am kindly requesting for
assistance
I have my configuration and output as followed:
SYSTEM CONFIGURATION:
OS : Ubuntu 10.10 Maverick Meerkat
TI- Calypso: Motorola C155 (US Model)
Cable: PL2303 USB cable
Tool-chain: Self compiled GNUArm tool-chain based on instruction on
http://bb.osmocom.org/trac/wiki/GnuArmToolchain
OsmocomBB Branch: Successful installation of both Master and Sylvain branch
with modification to Makefile to enable transmitting
PROGRAM OUTPUTS:
Running OsmocomBB (Sylvain Branch)
Osmocon Output 1 :
rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/osmocon$ ./osmocon -p
/dev/ttyUSB0 -m c155
../../target/firmware/board/compal_e99/layer1.compalram.bin
got 1 bytes from modem, data looks like: 00 .
got 6 bytes from modem, data looks like: 1b f6 02 00 41 01 ....A.
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
read_file(../../target/firmware/board/compal_e99/layer1.compalram.bin):
file_size=53804, hdr_len=4, dnload_len=53811
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 43 C
Received PROMPT2 from phone, starting download
handle_write(): 4096 bytes (4096/53811)
handle_write(): 4096 bytes (8192/53811)
handle_write(): 4096 bytes (12288/53811)
handle_write(): 4096 bytes (16384/53811)
handle_write(): 4096 bytes (20480/53811)
handle_write(): 4096 bytes (24576/53811)
handle_write(): 4096 bytes (28672/53811)
handle_write(): 4096 bytes (32768/53811)
handle_write(): 4096 bytes (36864/53811)
handle_write(): 4096 bytes (40960/53811)
handle_write(): 4096 bytes (45056/53811)
handle_write(): 4096 bytes (49152/53811)
handle_write(): 4096 bytes (53248/53811)
handle_write(): 563 bytes (53811/53811)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 03 .
got 1 bytes from modem, data looks like: 42 B
Received DOWNLOAD ACK from phone, your code is running now!
OSMOCOM Layer 1 (revision osmocon_v0.0.0-1111-ge838620)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: 7e570d2eb10393bb
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
======================================================================
Power up simcard:
Assert DSP into Reset
Releasing DSP from Reset
Setting some dsp_api.ndb values
Setting API NDB parameters
DSP Download Status: 0x0001
DSP API Version: 0x0000 0x0000
Finishing download phase
DSP Download Status: 0x0002
DSP API Version: 0x3606 0x0000
LOST 3907!
LOST 3750!
Above output was done with Mobile App not in used.
Running Osmocon with Mobile App.
Mobile App Output 1:
rola@amira:~$ cd test2-osmocom-bb/osmocom-bb/src/host/layer23/src/mobile/
rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/layer23/src/mobile$
./mobile -i 127.0.0.1
Copyright (C) 2008-2010 ...
Contributions by ...
License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
<000f> sim.c:1206 init SIM client
<0006> gsm48_cc.c:63 init Call Control
<0001> gsm48_rr.c:5100 init Radio Ressource process
<0005> gsm48_mm.c:1312 init Mobility Management process
<0005> gsm48_mm.c:1035 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:5023 init PLMN process
<0003> gsm322.c:5024 init Cell Selection process
***
Warning: Mobile '1' has default IMEI: 000000000000000
This could relate your identitiy to other users with default IMEI.
***
Mobile '1' initialized, please start phone now!
VTY available on port 4247.
<0005> subscriber.c:567 Requesting SIM file 0x2fe2
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:697 go MF
<000f> sim.c:241 SELECT (file=0x3f00)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
******The above output runs with MS still turned off.
Telnet Output:
rola@amira:~$ telnet localhost 4247
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Welcome to the OsmocomBB control interface
OsmocomBB> en
OsmocomBB# sim read 1
OsmocomBB# conf t
OsmocomBB(config)# ms 1
OsmocomBB(ms)#noshutdown
% Unknown command.
OsmocomBB(ms)#
% (MS 1)
% No service.
OsmocomBB(ms)#en
OsmocomBB# sh ms
MS '1' is up, service is unavailable
IMEI: 000000000000000
IMEISV: 0000000000000000
IMEI generation: fixed
automatic network selection state: A4 wait for PLMN to appear
cell selection state: C6 any cell selection
radio ressource layer state: idle
mobility management layer state: MM idle, no cell available
OsmocomBB# sh support
Supported features of MS '1':
Phase 2 mobile station
R-GSM : yes
E-GSM : yes
P-GSM : yes
GSM900 Class : 4
DCS 1800 : yes
DCS Class : 1
GSM 850 : disabled
PCS 1900 : disabled
GSM 480 : no
GSM 450 : no
CECS : no
VGCS : no
VBS : no
SMS : no
SS_IND : yes
PS_CAP : no
CMSP : no
SoLSA : no
LCSVA : no
LOC_SERV : no
A5/1 : yes
A5/2 : yes
A5/3 : no
A5/4 : no
A5/5 : no
A5/6 : no
A5/7 : no
A5/1 : yes
Channels : SDCCH + TCH/F + TCH/H
Full-Rate V1 : yes
Full-Rate V2 : yes
Full-Rate V3 : no
Half-Rate V1 : yes
Half-Rate V3 : no
Min RXLEV : -106
OsmocomBB#
**** Clearly above under supporrt command, PCS 1900 and GSM 850 is disabled.
I have no clue of how turn it on.
Osmocon Output 2:
PM MEAS: ARFCN=120, 35 dBm at baseband, -102 dBm at RF
PM MEAS: ARFCN=121, 41 dBm at baseband, -97 dBm at RF
PM MEAS: ARFCN=122, 40 dBm at baseband, -97 dBm at RF
PM MEAS: ARFCN=123, 41 dBm at baseband, -96 dBm at RF
PM MEAS: ARFCN=124, 41 dBm at baseband, -97 dBm at RF
L1CTL_PM_REQ start=512 end=885
PM MEAS: ARFCN=512, 43 dBm at baseband, -94 dBm at RF
PM MEAS: ARFCN=512, 40 dBm at baseband, -97 dBm at RF
PM MEAS: ARFCN=513, 40 dBm at baseband, -97 dBm at RF
-
-
-
PM MEAS: ARFCN=883, 41 dBm at baseband, -96 dBm at RF
PM MEAS: ARFCN=884, 43 dBm at baseband, -94 dBm at RF
PM MEAS: ARFCN=885, 44 dBm at baseband, -94 dBm at RF
L1CTL_PM_REQ start=955 end=1023
PM MEAS: ARFCN=955, 41 dBm at baseband, -96 dBm at RF
PM MEAS: ARFCN=955, 37 dBm at baseband, -101 dBm at RF
-
-
-
PM MEAS: ARFCN=1021, 43 dBm at baseband, -94 dBm at RF
PM MEAS: ARFCN=1022, 36 dBm at baseband, -101 dBm at RF
PM MEAS: ARFCN=1023, 41 dBm at baseband, -96 dBm at RF
L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=872, flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1002,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1000,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=983,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=979,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=966,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=962,
flags=0x7)
Starting FCCH RecognitionLOST 1885!
LOST 1865!
L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=958, flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=957,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=879,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=877,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=876,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=874,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=871,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=867,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=849,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=844,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=839,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=837,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=835,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=828,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=827,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=826,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=824,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=820,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=818,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=817,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=811,
flags=0x7)
Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=809,
flags=0x7)
^C
rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/osmocon$
**** The FBSB yield no result
Mobile App Output2:
<0003> gsm322.c:2900 Found signal (ARFCN 648(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 649(DCS) rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 650(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 651(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 652(DCS) rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 653(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 654(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 655(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 656(DCS) rxlev -94 (16))
-
-
--
-
<0003> gsm322.c:2900 Found signal (ARFCN 876(DCS) rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 877(DCS) rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 878(DCS) rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 879(DCS) rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 880(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 881(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 882(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 883(DCS) rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 884(DCS) rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 885(DCS) rxlev -94 (16))
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (955..955)
<0003> gsm322.c:2900 Found signal (ARFCN 955 rxlev -96 (14))
<0003> gsm322.c:2888 Getting PM for ARFCN 955 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2900 Found signal (ARFCN 955 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 956 rxlev -100 (10))
<0003> gsm322.c:2900 Found signal (ARFCN 957 rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 958 rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 959 rxlev -96 (14))
--
--
--
--
<0003> gsm322.c:2900 Found signal (ARFCN 998 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 999 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1000 rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 1001 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1002 rxlev -93 (17))
<0003> gsm322.c:2900 Found signal (ARFCN 1003 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1004 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1005 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1006 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1007 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1008 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1009 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1010 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1011 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1012 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1013 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1014 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1015 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1016 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1017 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1018 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1019 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1020 rxlev -96 (14))
<0003> gsm322.c:2900 Found signal (ARFCN 1021 rxlev -94 (16))
<0003> gsm322.c:2900 Found signal (ARFCN 1022 rxlev -101 (9))
<0003> gsm322.c:2900 Found signal (ARFCN 1023 rxlev -96 (14))
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2828 Found 568 frequencies.
<0003> gsm322.c:2248 Scanning frequency 872(DCS) (rxlev -92).
<0003> gsm322.c:469 Sync to ARFCN=872(DCS) rxlev=-92 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 40 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=872(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 1002 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=1002 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 30 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=1002
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 1000 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=1000 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 29 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=1000
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 983 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=983 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 28 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=983
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 979 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=979 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 27 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=979
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 966 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=966 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 26 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=966
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 962 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=962 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 25 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=962
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 958 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=958 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 24 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=958
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 957 (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=957 rxlev=-93 (No sysinfo yet, ccch mode
NONE)
<0003> gsm322.c:2268 23 frequencies left in band 955..124
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=957
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 879(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=879(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 39 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=879(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 877(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=877(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 38 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=877(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 876(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=876(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 37 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=876(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 874(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=874(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 36 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=874(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 871(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=871(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 35 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=871(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 867(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=867(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 34 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=867(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 849(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=849(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 33 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=849(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 844(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=844(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 32 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=844(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 839(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=839(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 31 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=839(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 837(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=837(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 30 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=837(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 835(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=835(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 29 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=835(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 828(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=828(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 28 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
--
--
--
<0003> gsm322.c:2268 23 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=818(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 817(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=817(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 22 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=817(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 811(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=811(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 21 frequencies left in band 512..885
<0003> gsm322.c:2993 Channel sync error.
<0003> gsm322.c:2998 free sysinfo ARFCN=811(DCS)
<0003> gsm322.c:2734 Cell selection failed, sync timeout.
<0003> gsm322.c:2248 Scanning frequency 809(DCS) (rxlev -93).
<0003> gsm322.c:469 Sync to ARFCN=809(DCS) rxlev=-93 (No sysinfo yet, ccch
mode NONE)
<0003> gsm322.c:2268 20 frequencies left in band 512..885
**** The output displayed cell selection failure. The process repeats itself
continuously
Thanks
Rasak
--
View this message in context:
http://baseband-devel.722152.n3.nabble.com/GSM-850-PCS-1900-PLEASE-HELP-NEE…
Sent from the baseband-devel mailing list archive at Nabble.com.
20 Sep
20 Sep
8:05 a.m.
that OsmocomBB project might not be designed optimally
for US GSM Bands (GSM
850/ PCS 1900). The system
could not get synchronised to a frequency when FSBS request is carried out.
Well you need to enable it in the configuration for it to even try those bands.
In the telnet vty interface try something like
enable
conf t
ms 1
support
gsm-850
pcs
write
Cheers,
Sylvain
21 Sep
21 Sep
3:26 a.m.
Hi All,
Thanks a lot Sylvain for your response. At least the SIM Reader can read
the SIM information now. The Mobile outputs the following: IMEI, IMSI,
ICCID, MCC, MNC,LAC and the KEY. But, the process returnes failure for SIM
file at 0x6f40 and hangs while retrieving information for SIM file at to
retrieve information in location 0x6f30. However, after making sure that the
gsm-850 and pcs are enabled, running of the Osmocon without SIM still yield
the same output I posted earlier with DCS as the reference band of the
Mobile output.
Running Osmocon with SIM:
Osmocom Output:
rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/osmocon$ ./osmocon -p
/dev/ttyUSB0 -m c155
../../target/firmware/board/compal_e99/layer1.compalram.bin
got 7 bytes from modem, data looks like: 1b f6 02 00 41 01 40 ....A.@
Received PROMPT1 from phone, responding with CMD
read_file(../../target/firmware/board/compal_e99/layer1.compalram.bin):
file_size=53804, hdr_len=4, dnload_len=53811
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 43 C
Received PROMPT2 from phone, starting download
handle_write(): 4096 bytes (4096/53811)
handle_write(): 4096 bytes (8192/53811)
handle_write(): 4096 bytes (12288/53811)
handle_write(): 4096 bytes (16384/53811)
handle_write(): 4096 bytes (20480/53811)
handle_write(): 4096 bytes (24576/53811)
handle_write(): 4096 bytes (28672/53811)
handle_write(): 4096 bytes (32768/53811)
handle_write(): 4096 bytes (36864/53811)
handle_write(): 4096 bytes (40960/53811)
handle_write(): 4096 bytes (45056/53811)
handle_write(): 4096 bytes (49152/53811)
handle_write(): 4096 bytes (53248/53811)
handle_write(): 563 bytes (53811/53811)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 03 .
got 1 bytes from modem, data looks like: 42 B
Received DOWNLOAD ACK from phone, your code is running now!
OSMOCOM Layer 1 (revision osmocon_v0.0.0-1111-ge838620)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: 7e570d2eb10393bb
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
======================================================================
Power up simcard:
Assert DSP into Reset
Releasing DSP from Reset
Setting some dsp_api.ndb values
Setting API NDB parameters
DSP Download Status: 0x0001
DSP API Version: 0x0000 0x0000
Finishing download phase
DSP Download Status: 0x0002
DSP API Version: 0x3606 0x0000
LOST 7019!
SIM Request (7): a0 a4 00 00 02 3f 00
Status 2: 9F 22
SIM Request (5): a0 c0 00 00 22
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 2f e2
Status 2: 9F 0F
SIM Request (5): a0 c0 00 00 0f
Status 1: 90 00
SIM Request (5): a0 b0 00 00 0a
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 7f 20
Status 2: 9F 22
SIM Request (5): a0 c0 00 00 22
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 6f 07
Status 2: 9F 0F
SIM Request (5): a0 c0 00 00 0f
Status 1: 90 00
SIM Request (5): a0 b0 00 00 09
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 6f 7e
Status 2: 9F 0F
SIM Request (5): a0 c0 00 00 0f
Status 1: 90 00
SIM Request (5): a0 b0 00 00 0b
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 3f 00
Status 2: 9F 22
SIM Request (5): a0 c0 00 00 22
Status 1: 90 00
LOST 1893!
LOST 1857!
SIM Request (7): a0 a4 00 00 02 7f 10
Status 2: 9F 22
SIM Request (5): a0 c0 00 00 22
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 6f 40
Status 2: 9F 0F
SIM Request (5): a0 c0 00 00 0f
Status 1: 90 00
SIM Request (5): a0 b0 00 00 80
Status 1: 94 08
SIM Request (7): a0 a4 00 00 02 3f 00
Status 2: 9F 22
SIM Request (5): a0 c0 00 00 22
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 7f 20
Status 2: 9F 22
SIM Request (5): a0 c0 00 00 22
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 6f 20
Status 2: 9F 0F
SIM Request (5): a0 c0 00 00 0f
Status 1: 90 00
SIM Request (5): a0 b0 00 00 09
Status 1: 90 00
SIM Request (7): a0 a4 00 00 02 6f 30
Status 2: 9F 0F
SIM Request (5): a0 c0 00 00 0f
Status 1: 90 00
SIM Request (5): a0 b0 00 00 fc
Osmocon hang at this point.
Mobile Output:
rola@amira:~/test2-osmocom-bb/osmocom-bb/src/host/layer23/src/mobile$
./mobile -i 127.0.0.1
Copyright (C) 2008-2010 ...
Contributions by ...
License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
<000f> sim.c:1206 init SIM client
<0006> gsm48_cc.c:63 init Call Control
<0001> gsm48_rr.c:5100 init Radio Ressource process
<0005> gsm48_mm.c:1312 init Mobility Management process
<0005> gsm48_mm.c:1035 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:5023 init PLMN process
<0003> gsm322.c:5024 init Cell Selection process
***
Warning: Mobile '1' has default IMEI: 000000000000000
This could relate your identitiy to other users with default IMEI.
***
Mobile '1' initialized, please start phone now!
VTY available on port 4247.
<0005> subscriber.c:567 Requesting SIM file 0x2fe2
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:697 go MF
<000f> sim.c:241 SELECT (file=0x3f00)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=34)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:241 SELECT (file=0x2fe2)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=15)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:277 READ BINARY (offset=0 len=10)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0)
<000f> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:151 sending result to callback function (type=0)
<0005> subscriber.c:236 received ICCID #################### from SIM
<0005> subscriber.c:567 Requesting SIM file 0x6f07
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:706 requested path is longer, go child DFgsm
<000f> sim.c:241 SELECT (file=0x7f20)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=34)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:241 SELECT (file=0x6f07)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=15)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:277 READ BINARY (offset=0 len=9)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0)
<000f> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:151 sending result to callback function (type=0)
<0005> subscriber.c:266 received IMSI ################ from SIM
<0005> subscriber.c:567 Requesting SIM file 0x6f7e
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:241 SELECT (file=0x6f7e)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=15)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:277 READ BINARY (offset=0 len=11)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0)
<000f> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:151 sending result to callback function (type=0)
<0005> subscriber.c:302 received LOCI from SIM (mcc=### mnc=### lac=#####
##)
<0005> subscriber.c:567 Requesting SIM file 0x6f40
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:697 go MF
<000f> sim.c:241 SELECT (file=0x3f00)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=34)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:706 requested path is longer, go child DFtelecom
<000f> sim.c:241 SELECT (file=0x7f10)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=34)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:241 SELECT (file=0x6f40)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=15)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:277 READ BINARY (offset=0 len=128)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0)
<000f> sim.c:876 received APDU (len=128 sw1=0x94 sw2=0x08)
<000f> sim.c:952 command failed
<000f> sim.c:151 sending result to callback function (type=1)
<0005> subscriber.c:620 SIM reading failed, ignoring!
<0005> subscriber.c:567 Requesting SIM file 0x6f20
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:697 go MF
<000f> sim.c:241 SELECT (file=0x3f00)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=34)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:706 requested path is longer, go child DFgsm
<000f> sim.c:241 SELECT (file=0x7f20)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=34)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:241 SELECT (file=0x6f20)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=15)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:277 READ BINARY (offset=0 len=9)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0)
<000f> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:151 sending result to callback function (type=0)
<0005> subscriber.c:349 received KEY from SIM
<0005> subscriber.c:567 Requesting SIM file 0x6f30
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:241 SELECT (file=0x6f30)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
<000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)
<000f> sim.c:949 command successfull
<000f> sim.c:571 GET RESPONSE (len=15)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0)
<000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)
<000f> sim.c:949 command successfull
<000f> sim.c:277 READ BINARY (offset=0 len=252)
<000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0)
###### are place holders for actual SIM information.
Telnett Output:
OsmocomBB# show running-config
Current configuration:
!
!
line vty
no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
no hide-default
!
ms 1
layer2-socket /tmp/osmocom_l2
sap-socket /tmp/osmocom_sap
sim reader
network-selection-mode auto
imei 000000000000000 0
imei-fixed
no emergency-imsi
no call-waiting
no auto-answer
no clip
no clir
tx-power auto
no simulated-delay
no stick
location-updating
neighbour-measurement
codec full-speed prefer
codec half-speed
no abbrev
support
a5/1
a5/2
no p-gsm
no e-gsm
no r-gsm
gsm-850
no dcs
pcs
class-900 4
class-850 4
class-dcs 1
class-pcs 1
channel-capability sdcch+tchf+tchh
full-speech-v1
full-speech-v2
half-speech-v1
min-rxlev -106
dsc-max 90
no skip-max-per-band
exit
test-sim
imsi 001010000000000
ki xor 00 00 00 00 00 00 00 00 00 00 00 00
no barred-access
no rplmn
hplmn-search foreign-country
exit
no shutdown
exit
!
end
OsmocomBB# sim read 1
OsmocomBB# show ms 1
MS '1' is up, service is limited
IMEI: 000000000000000
IMEISV: 0000000000000000
IMEI generation: fixed
automatic network selection state: A6 no SIM inserted
cell selection state: C6 any cell selection
radio ressource layer state: idle
mobility management layer state: MM idle, PLMN search
OsmocomBB# show support
Supported features of MS '1':
Phase 2 mobile station
R-GSM : disabled
E-GSM : disabled
P-GSM : disabled
DCS 1800 : disabled
GSM 850 : yes
GSM 850 Class: 4
PCS 1900 : yes
PCS Class : 1
GSM 480 : no
GSM 450 : no
CECS : no
VGCS : no
VBS : no
SMS : no
SS_IND : yes
PS_CAP : no
CMSP : no
SoLSA : no
LCSVA : no
LOC_SERV : no
A5/1 : yes
A5/2 : yes
A5/3 : no
A5/4 : no
A5/5 : no
A5/6 : no
A5/7 : no
A5/1 : yes
Channels : SDCCH + TCH/F + TCH/H
Full-Rate V1 : yes
Full-Rate V2 : yes
Full-Rate V3 : no
Half-Rate V1 : yes
Half-Rate V3 : no
Min RXLEV : -106
OsmocomBB#
I disabled every other band except gsm-850 and pcs.
I have been taken time reading through the source codes and tracking the
process from one section to another. And at the same digging for information
on techniques and protocols applied in the project. I hope I can just get
the application runs to a level where I can use it to establish a call.
Thanks to everyone.
Best regards,
Rasak
--
View this message in context:
http://baseband-devel.722152.n3.nabble.com/GSM-850-PCS-1900-PLEASE-HELP-NEE…
Sent from the baseband-devel mailing list archive at Nabble.com.
4612
days inactive
4613
days old
baseband-devel@lists.osmocom.org
2 comments
2 participants
participants (2)
-
rola -
Sylvain Munaut