[PATCH 0/2] Add gta0x board support

Hello, these patches enable osmocom to be run on the Openmoko GTA0x devices (only tested with GTA02). The first patch fixes an issue with baudrate setting in osmocon.c (termios setting wasn't read prior to writing). The second patch adds a gta0x board (currently only copied from compal_e88) and implements the differences in controlling the RF frontend. Use it as follows (on the device): kill all processes communicating with the modem (fso, gsm0710muxd) gta02# echo 1 > /sys/bus/platform/devices/neo1973-pm-gsm.0/download Then on the PC connect the download cable and start osmocon: # ./osmocon -m romload -p /dev/ttyUSB0 ../../target/firmware/board/gta0x/l1test.osmoload.bin To initiate the download toggle baseband power on the phone: gta02# echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on && After the firmware is transferred the app should start. Regards, Daniel Willmann Daniel Willmann (2): osmocon.c: Fix serial_set_baudrate function Add new board gta0x (for Openmoko Freerunner devices) and build it src/host/osmocon/osmocon.c | 5 + src/target/firmware/Makefile | 4 +- .../firmware/board/common/rffe_gta0x_triband.c | 88 +++++++++++++ src/target/firmware/board/gta0x/init.c | 131 ++++++++++++++++++++ 4 files changed, 227 insertions(+), 1 deletions(-) create mode 100644 src/target/firmware/board/common/rffe_gta0x_triband.c create mode 100644 src/target/firmware/board/gta0x/init.c