Hi Jean-Samuel.
Took another week, but still no news from you.
Could you please inform us about the progress in the production of
prototypes.
Best regards,
Andrey Sviyazov.
2012/6/13 Andrey Sviyazov <andreysviyaz(a)gmail.com>
Hi Jean-Samuel.
Please inform us about fabrication progress even there are no issues.
Best regards,
Andrey Sviyazov.
(Sent from my mobile client)
12.06.2012 4:48 пользователь "Andrey Sviyazov" <andreysviyaz(a)gmail.com>
написал:
Here PcbDoc file @ 12/06/2012 .
> So, it all done :)
>
> Best regards,
> Andrey Sviyazov.
>
>
>
> 2012/6/12 Andrey Sviyazov <andreysviyaz(a)gmail.com>
>
>> Hi all!
>>
>> Here final project UmTRXv2 @ 12/06/2012 (PcbDoc file will be attached to
>> the next e-mail).
>> I found an mistake with non-SMD LED's positions in compare to Ettus
>> where A-B in left-to-right orientation (see picture).
>> Andrew Karpenkov suggested me to change it because of it is not yet
>> standard but people accustomed to this.
>> It is done.
>>
>> Also he suggest me to make four test points for RXOUT legs of LMS
>> because he work with this now and found it helpfull.
>> It is done.
>>
>> Also test points which without connector now referenced as TST and
>> therefore RefDes of some connectors changed.
>>
>> Jean-Samuel, please find Gerber files, NC drill and layer stack
>> desription files which usually required to produce PCB.
>>
>> Best regards,
>> Andrey Sviyazov.
>>
>>
>>
>> 2012/6/10 Andrey Sviyazov <andreysviyaz(a)gmail.com>
>>
>>> Hi all!
>>>
>>> Here final project UmTRXv2 @ 10/06/2012 (PcbDoc file will be attached
>>> to the next e-mail).
>>> Jean-Samuel, please check SMD LED's placed at the front edge of the PCB.
>>> If you agree with this variant then I'll generate Gerber files vs
>>> required layers and description to produce PCB.
>>> If anybody find any mistake, please inform me immediatelly.
>>>
>>> Best regards,
>>> Andrey Sviyazov.
>>>
>>
>>
>