Dear Alexander,
Which are the packages required to be built for GPRS support in UmDESK?
Earlier I had installed only the osmo-pcu and it was working properly.
With the newer installation it is not working
Currently I've installed libosmocore, osmo-pcu, openggsn, libosmo-abis,
osmo-nitb, osmo-bts, osmo-trx and lcr.
Does it require the libosmo-netif and the osmo-pcu libraries?
I tried installing libosmo-netif package also, and now the osmo-pcu package
is not able to detect the BTS at all.
Which are the packages required to be run for GPRS? Is there any other
links available for this installation with the branch details to be used
for GPRS support?
Thanks and Regards,
Jijo
On Thu, Jun 18, 2015 at 10:39 AM, Alexander Chemeris <
alexander.chemeris(a)gmail.com> wrote:
On Wed, Jun 17, 2015 at 2:10 PM, Joe Ge
<jijo123789(a)gmail.com> wrote:
1. How do I initiate a handover
Either by physically moving the phone or by using "subscriber ID
handover BTS_NR" VTY command at the NITB.
and is there any way to see the call flow
messages from the terminals ?
Configure GSMTAP at the NITB
2. How do I build the system for GPRS
support(OpenGGSN). I did it earlier
using the following links
http://openbsc.osmocom.org/trac/wiki/OpenBSC_GPRS and
https://wush.net/trac/rangepublic/wiki/fairwaves.gprs
What is the build version that I should be using for GPRS support?
'fairwaves/master' should work.
--
Regards,
Alexander Chemeris.
CEO, Fairwaves, Inc.
https://fairwaves.co