Dear Alexander,

Which are the packages required to be built for GPRS support in UmDESK?

Earlier I had installed only the osmo-pcu and it was working properly.

With the newer installation it is not working
Currently I've installed libosmocore, osmo-pcu, openggsn, libosmo-abis, osmo-nitb, osmo-bts, osmo-trx and lcr.

Does it require the libosmo-netif and the osmo-pcu libraries?

I tried installing libosmo-netif package also, and now the osmo-pcu package is not able to detect the BTS at all.

Which are the packages required to be run for GPRS? Is there any other links available for this installation with the branch details to be used for GPRS support?

Thanks and Regards,

Jijo

On Thu, Jun 18, 2015 at 10:39 AM, Alexander Chemeris <alexander.chemeris@gmail.com> wrote:

On Wed, Jun 17, 2015 at 2:10 PM, Joe Ge <jijo123789@gmail.com> wrote:
> 1. How do I initiate a handover

Either by physically moving the phone or by using "subscriber ID
handover BTS_NR" VTY command at the NITB.

> and is there any way to see the call flow messages from the terminals ?

Configure GSMTAP at the NITB

> 2. How do I build the system for GPRS support(OpenGGSN). I did it earlier
> using the following links
> http://openbsc.osmocom.org/trac/wiki/OpenBSC_GPRS and
> https://wush.net/trac/rangepublic/wiki/fairwaves.gprs
> What is the build version that I should be using for GPRS support?

'fairwaves/master' should work.

--
Regards,
Alexander Chemeris.
CEO, Fairwaves, Inc.
https://fairwaves.co

referrer" target="_blank">http://eepurl.com/baL_pf