Under OpenBSD only sync mode works, and that's only with Stuart Henderson's patches from http://www.openbsd.org/cgi-bin/cvsweb/ports/comms/rtl-sdr/patches/. I'm scanning a bunch of 120 MHz AM aircraft freqs right now and I don't hear the noise, but scanning FM I do. rtl_adsb, rtl_tcp, etc. aren't fixed yet. I'm running libusb 1.0.9p3 from the OpenBSD ports collection under 5.2. I have a 5.0 machine with 1.0.9 built from a tarball that works a few minutes and gives a "library -99" error. Alan ----- Radio Astronomy - the ultimate DX --- On Tue, 4/30/13, Ben Moore <benjamin.n.moore@gmail.com> wrote: From: Ben Moore <benjamin.n.moore@gmail.com> Subject: Re: rtl_fm scanning To: osmocom-sdr@lists.osmocom.org Date: Tuesday, April 30, 2013, 3:16 PM I haven't had a chance to check on the Raspberry Pi to see if this issue is fixed by forcing synchronous mode, but I suspect it is. http://lists.gnumonks.org/pipermail/osmocom-sdr/2013-April/000588.html - Ben On Apr 30, 2013, at 11:07 AM, Alan Corey wrote: Mine doesn't hang, it just makes a noise. If I change just the demodulator to AM instead of FM, it doesn't do it. If I set the squelch level up around 1000 it takes out the signals, but not the noise. OpenBSD 5.2, ftl_fm from git about 4/23/2013 Alan ----- Radio Astronomy - the ultimate DX --- On Tue, 4/30/13, Chourico <lists@the-reapers.com> wrote: From: Chourico <lists@the-reapers.com> Subject: Re: rtl_fm scanning To: osmocom-sdr@lists.osmocom.org Date: Tuesday, April 30, 2013, 7:53 AM Colin Stagner <cbs228 <at> gmail.com> writes:
I am also having the rtl_fm scanning bug which was first reported in http://lists.gnumonks.org/pipermail/osmocom-sdr/2013-February/000485.html
Can anyone else reproduce this bug?
I am having the same problem. EzTV666, Ubuntu 12.04, kernel 3.2.0-23, latest rtl_sdr from git, 2013-04-30 rtl_fm works fine when only one frequency is specified, hangs after first frequency is skipped.