Hi,
I perform measurements of the latest implementation of EDGE in osmo-pcu and latest
osmo-bts from master branch for LC15 platform.
In DL, 2 MBytes of data was downloaded from our a server per measurement and repeat 10
times to get the average DL throughput.
In UL, 100 KBytes of data was uploaded to a local server per measurement and repeat 10
times to get the average UL throughput.
Coding scheme DL (kbps) UL (kbps)
MCS9 184 30
MCS8 144 35.5
MCS7 110 21.5
The throughput is not similar to your measurement and I observed that the PCU prints a
bunch messages about
'Scheduling Ack/Nack, because MS is stalled'
Do you observe this issue during performance test? What causes the MS stalled?
Thanks,
Minh-Quang Nguyen
Concepteur logiciel | Software designer GSM/Network
T. 418 914-7484 x2296 | 1 855 914-7484 | F. 418 914-9477
2150, Cyrille-Duquet, Québec (Québec) G1N 2G3 CANADA
minh-quang.nguyen(a)nutaq.com
www.nutaq.com
QUEBEC MONTREAL NEW YORK
Facebook Twitter LinkedIn YouTube
-----Original Message-----
From: osmocom-net-gprs [mailto:osmocom-net-gprs-bounces@lists.osmocom.org] On Behalf Of
Saurabh Sharan
Sent: Friday, July 22, 2016 8:30 AM
To: osmocom-net-gprs(a)lists.osmocom.org
Subject: Re: [EGPRS] Performance results for EGPRS test in Radisys lab
Hello Max,
What about MCS UL? Do you have some statistics which
one has been used
The uplink tests have been completed for all EGPRS coding scheme (MCS1 - 9) using the ping
or TCP download.
We have not conducted specific test for throughput estimation in uplink direction till
now.
Regards
Saurabh