Problem after create-trx1, query gives no info about it.
Hi, i have problems bringing up the second TRX. I used the following procedure: ./bs11_config -p /dev/ttyUSB0 disconnect ./bs11_config -p /dev/ttyUSB0 create-trx1 After reboot the query tells me: ./bs11_config -p /dev/ttyUSB0 query LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring ... BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM) LMT LOGOFF: ACK Now i wondered where is the trx1, did anyone has a similar problem? I have the BS-11 ESN PCB Serial Number: 001127 which should have two TRX. Greets & thx Till -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser
On Tue, Feb 02, 2010 at 06:54:08PM +0100, till wrote:
Hi,
i have problems bringing up the second TRX. I used the following procedure:
./bs11_config -p /dev/ttyUSB0 disconnect ./bs11_config -p /dev/ttyUSB0 create-trx1
After reboot the query tells me:
./bs11_config -p /dev/ttyUSB0 query LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring
THis "MBCCU1: Load" tells you that the second TRX object has been creted and it is active and loaded.
BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM)
Now i wondered where is the trx1, did anyone has a similar problem? I have the BS-11 ESN PCB Serial Number: 001127 which should have two TRX.
it might well be a bug in the bs11_config program that the second PA does not show. -- - Harald Welte <laforge@gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)
participants (2)
-
Harald Welte -
till