Hi,
i have problems bringing up the second TRX. I used the following procedure:
./bs11_config -p /dev/ttyUSB0 disconnect
./bs11_config -p /dev/ttyUSB0 create-trx1
After reboot the query tells me:
./bs11_config -p /dev/ttyUSB0 query
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring
...
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
LMT LOGOFF: ACK
Now i wondered where is the trx1, did anyone has a similar problem? I have the BS-11 ESN
PCB Serial Number: 001127 which should have two TRX.
Greets & thx Till
--
Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 -
sicherer, schneller und einfacher!
http://portal.gmx.net/de/go/chbrowser