4 Feb
2010
4 Feb
'10
5:34 p.m.
On Tue, Feb 02, 2010 at 06:54:08PM +0100, till wrote:
Hi,
i have problems bringing up the second TRX. I used the following procedure:
./bs11_config -p /dev/ttyUSB0 disconnect
./bs11_config -p /dev/ttyUSB0 create-trx1
After reboot the query tells me:
./bs11_config -p /dev/ttyUSB0 query
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring
THis "MBCCU1: Load" tells you that the second TRX object has been creted and it
is active and loaded.
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
Now i wondered where is the trx1, did anyone has a
similar problem? I have
the BS-11 ESN PCB Serial Number: 001127 which should have two TRX.
it might well be a bug in the bs11_config program that the second PA does not
show.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)