Calculation looks correct. Have you tested it? IIRC I added tests for BER calculations which you could extend. -- Regards, Alexander Chemeris CEO Fairwaves, Inc. https://fairwaves.co On Aug 4, 2016 19:18, "Max" <msuraev@sysmocom.de> wrote:
Please have a look at gerrit #623 - am I computing BER properly? I've tried to follow what's done for meas. ind. Also, how would you recommend to compute/estimate C/I? In the current patch version I'm just using 0.
On 08/02/2016 12:57 AM, Tom Tsou wrote:
On Fri, Jul 29, 2016 at 5:18 PM, Alexander Chemeris <alexander.chemeris@gmail.com> wrote:
Burst timing is also passed from osmo-trx to osmo-bts, so should be trivial to pass through. Yes. I don't know where the TOA value ends up in osmo-bts, but the value is definitely carried per-burst on the socket interface.
For C/I we need a comment from Thomas. Currently we don't have it on the osmo-trx interface and I'm not even sure we calculate it. We don't have C/I directly. We do have a running average 'noise' level (calculated channel power on non-active uplink slots) and the RSSI value. The channel noise is queried with the NOISELEV command. RSSI is carried per-burst on the socket message. C/I can be calculated from those two values.
Do we need a periodically averaged C/I value or an update every burst?
-TT
-- Max Suraev <msuraev@sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte