8 May
2013
8 May
'13
12:46 p.m.
Hey there,
it seems to me the pySim was trying to update 6f30 file (not sure why):
self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3))
and got back 0x9804 instead of 0x9000, which means you don't have
sufficient permissions to update that file - either pin verification went
wrong or you need some other key to update that file, not sure what
permissions are set of 6f30 file there.
Hopes this will help you debugging it.
Cheers!
Lukas
On Wed, May 8, 2013 at 1:38 PM, Martin Nagy <nugett(a)centrum.sk> wrote:
Hi all,
After buying a super Sim Kit (16 in 1) from China, I tried the reader
(green PCB inside a blue transparent plastic case with a blue LED) and SIM
(identified as a fakesupersim) with pysim tool. However i am getting the
following error:
/pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -z 1234 -j 1 -t auto
Insert card now (or CTRL-C to cancel)
Autodetected card type fakemagicsim
Generated card parameters :
Name : 26C3
SMSP : e1ffffffffffffffffffffffff058100945555ffffffffffff000000
ICCID : 8949262427518313026
MCC/MNC : 262/42
IMSI : 262422461512085
Ki : 7b74741a1ee14337ec23f9ab92a13648
OPC : ccd867d60797d8d45354a51b3ef568ff
Programming ...
Traceback (most recent call last):
File "./pySim-prog.py", line 530, in <module>
card.program(cp)
File "/home/nadicek/pysim/pysim/pySim/cards.py", line 231, in program
self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3))
File "/home/nadicek/pysim/pysim/pySim/commands.py", line 53, in
update_binary
return self._tp.send_apdu_checksw(pdu)
File "/home/nadicek/pysim/pysim/pySim/transport/__init__.py", line 87,
in send_apdu_checksw
raise RuntimeError("SW match failed ! Expected %s and got %s." %
(sw.lower(), rv[1]))
RuntimeError: SW match failed ! Expected 9000 and got 9804.
I checked mailing lists and haven’t found anybody who had similar problem
with pysim. Also I have tried forcing different models of SIM, but nothing
is working. Obviously I can remove this check from the script file
(__init__.py in /pySim/transport), however somebody had a reason to put
such condition there. I would like to ask if it is safe to remove that line
of code and the purpose of that line of code.
Thanks a lot and best regards
Martin