Pysim error: SW match failed
Hi all, After buying a super Sim Kit (16 in 1) from China, I tried the reader (green PCB inside a blue transparent plastic case with a blue LED) and SIM (identified as a fakesupersim) with pysim tool. However i am getting the following error: /pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -z 1234 -j 1 -t auto Insert card now (or CTRL-C to cancel) Autodetected card type fakemagicsim Generated card parameters :
Name : 26C3 SMSP : e1ffffffffffffffffffffffff058100945555ffffffffffff000000 ICCID : 8949262427518313026 MCC/MNC : 262/42 IMSI : 262422461512085 Ki : 7b74741a1ee14337ec23f9ab92a13648 OPC : ccd867d60797d8d45354a51b3ef568ff
Programming ... Traceback (most recent call last): File "./pySim-prog.py", line 530, in <module> card.program(cp) File "/home/nadicek/pysim/pysim/pySim/cards.py", line 231, in program self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3)) File "/home/nadicek/pysim/pysim/pySim/commands.py", line 53, in update_binary return self._tp.send_apdu_checksw(pdu) File "/home/nadicek/pysim/pysim/pySim/transport/__init__.py", line 87, in send_apdu_checksw raise RuntimeError("SW match failed ! Expected %s and got %s." % (sw.lower(), rv[1])) RuntimeError: SW match failed ! Expected 9000 and got 9804. I checked mailing lists and haven’t found anybody who had similar problem with pysim. Also I have tried forcing different models of SIM, but nothing is working. Obviously I can remove this check from the script file (__init__.py in /pySim/transport), however somebody had a reason to put such condition there. I would like to ask if it is safe to remove that line of code and the purpose of that line of code. Thanks a lot and best regards Martin
Hey there, it seems to me the pySim was trying to update 6f30 file (not sure why): self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3)) and got back 0x9804 instead of 0x9000, which means you don't have sufficient permissions to update that file - either pin verification went wrong or you need some other key to update that file, not sure what permissions are set of 6f30 file there. Hopes this will help you debugging it. Cheers! Lukas On Wed, May 8, 2013 at 1:38 PM, Martin Nagy <nugett@centrum.sk> wrote:
Hi all, After buying a super Sim Kit (16 in 1) from China, I tried the reader (green PCB inside a blue transparent plastic case with a blue LED) and SIM (identified as a fakesupersim) with pysim tool. However i am getting the following error:
/pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -z 1234 -j 1 -t auto Insert card now (or CTRL-C to cancel) Autodetected card type fakemagicsim Generated card parameters :
Name : 26C3 SMSP : e1ffffffffffffffffffffffff058100945555ffffffffffff000000 ICCID : 8949262427518313026 MCC/MNC : 262/42 IMSI : 262422461512085 Ki : 7b74741a1ee14337ec23f9ab92a13648 OPC : ccd867d60797d8d45354a51b3ef568ff
Programming ... Traceback (most recent call last): File "./pySim-prog.py", line 530, in <module> card.program(cp) File "/home/nadicek/pysim/pysim/pySim/cards.py", line 231, in program self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3)) File "/home/nadicek/pysim/pysim/pySim/commands.py", line 53, in update_binary return self._tp.send_apdu_checksw(pdu) File "/home/nadicek/pysim/pysim/pySim/transport/__init__.py", line 87, in send_apdu_checksw raise RuntimeError("SW match failed ! Expected %s and got %s." % (sw.lower(), rv[1])) RuntimeError: SW match failed ! Expected 9000 and got 9804.
I checked mailing lists and haven’t found anybody who had similar problem with pysim. Also I have tried forcing different models of SIM, but nothing is working. Obviously I can remove this check from the script file (__init__.py in /pySim/transport), however somebody had a reason to put such condition there. I would like to ask if it is safe to remove that line of code and the purpose of that line of code.
Thanks a lot and best regards Martin
btw, you may want to move this discussion to the simtrace mailing list instead of openbsc, I think it fits there better. Lukas On Wed, May 8, 2013 at 1:46 PM, Lukas Kuzmiak <lukash@backstep.net> wrote:
Hey there,
it seems to me the pySim was trying to update 6f30 file (not sure why): self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3))
and got back 0x9804 instead of 0x9000, which means you don't have sufficient permissions to update that file - either pin verification went wrong or you need some other key to update that file, not sure what permissions are set of 6f30 file there.
Hopes this will help you debugging it.
Cheers! Lukas
On Wed, May 8, 2013 at 1:38 PM, Martin Nagy <nugett@centrum.sk> wrote:
Hi all, After buying a super Sim Kit (16 in 1) from China, I tried the reader (green PCB inside a blue transparent plastic case with a blue LED) and SIM (identified as a fakesupersim) with pysim tool. However i am getting the following error:
/pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -z 1234 -j 1 -t auto Insert card now (or CTRL-C to cancel) Autodetected card type fakemagicsim Generated card parameters :
Name : 26C3 SMSP : e1ffffffffffffffffffffffff058100945555ffffffffffff000000 ICCID : 8949262427518313026 MCC/MNC : 262/42 IMSI : 262422461512085 Ki : 7b74741a1ee14337ec23f9ab92a13648 OPC : ccd867d60797d8d45354a51b3ef568ff
Programming ... Traceback (most recent call last): File "./pySim-prog.py", line 530, in <module> card.program(cp) File "/home/nadicek/pysim/pysim/pySim/cards.py", line 231, in program self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3)) File "/home/nadicek/pysim/pysim/pySim/commands.py", line 53, in update_binary return self._tp.send_apdu_checksw(pdu) File "/home/nadicek/pysim/pysim/pySim/transport/__init__.py", line 87, in send_apdu_checksw raise RuntimeError("SW match failed ! Expected %s and got %s." % (sw.lower(), rv[1])) RuntimeError: SW match failed ! Expected 9000 and got 9804.
I checked mailing lists and haven’t found anybody who had similar problem with pysim. Also I have tried forcing different models of SIM, but nothing is working. Obviously I can remove this check from the script file (__init__.py in /pySim/transport), however somebody had a reason to put such condition there. I would like to ask if it is safe to remove that line of code and the purpose of that line of code.
Thanks a lot and best regards Martin
The article provides an insightful look into collaborative developments within the community, reflecting the same spirit of shared growth and creativity found at https://londonbookpublishing.co.uk/ where authors are supported in bringing their ideas to life. It shows how teamwork and innovation can drive meaningful progress.
participants (3)
-
Lukas Kuzmiak -
Martin Nagy -
scarlettzoey32＠gmail.com