16 Jul
2018
16 Jul
'18
6:06 a.m.
Hi,
all info is here :
https://osmocom.org/projects/cellular-infrastructure/wiki/OpenBSC_with_Aste…
regards,
DUO
On Mon, Jul 16, 2018 at 6:16 AM, Babar Ali <babarbuttgrt(a)yahoo.com> wrote:
I have build following components from source.
1. SoapySDR v0.6.1
2. Lime Suite v18.06.0
3. UHD v3.12.0.0-rc1
4. SoapyUHD v0.3.4
5. osmo-trx v0.4.0 configure --with-lms
6. osmo-nitb
7. osmo-bts-trx
however i have only following options are available with osmo-trx
*root@miniBTS:/home/pi/osmocom/osmo-trx#* osmo-trx-lms -h
Options:
-h This text
-C Filename The config file to use
-V Print the version of OsmoTRX
I have run each instance in separate windows but I cannot show network,
log file of following screens along with config files attached. would you
please help me whats going wrong, I am newbie
terminal 1 : osmo-trx-lms -C osmo-trx-limesdr.config
terminal 2: osmo-nitb -c openbsc.config
terminal 3: osmo-bts-trx -c osmobts.config
*attached config files have grabbed
from https://github.com/myriadrf/cellular-network-configs/tree/master/osmocom
<https://github.com/myriadrf/cellular-network-configs/tree/master/osmocom>*
*Regards*
*Babar Ali*
On Saturday, 14 July 2018, 4:31:43 AM GMT+5, Pau Espin Pedrol <
pespin(a)sysmocom.de> wrote:
Hi Babar,
If you want to use a LimeSDR-mini, you should build latest master, and
use osmo-trx-lms binary. To generate that binary, you first need to
build and install latest LimeSuite master [1], and then build osmo-trx
with --with-lms configure flag. As you are building for raspberry pi3,
you may want to enable instruction set optimizations as explained in the
user manual section "12 OsmoTRX hardware architecture support" [2]. Have
a look at the wiki page too for further information [3].
Also a reminder: we have osmo-trx-lms already available as a debian
package for debian9 [4], but I think we don't enable NEON on that build.
[1] https://github.com/myriadrf/LimeSuite
[2] http://ftp.osmocom.org/docs/latest/osmotrx-usermanual.pdf
[3] https://osmocom.org/projects/osmotrx/wiki/OsmoTRX
[4]
https://download.opensuse.org/repositories/network:/osmocom:
/nightly/Debian_9.0/
On 12/07/18 01:36, Babar Ali wrote:
--
Best Regards,
Sandi
Hi Harald
Thank very much for your support please, i’ll test & share the results.
Further kindly let me clear one more thing please, can I build osmotrx
on RaspbianOS, I have already tried to build osmotrx v0.3 on RasbianOS
it was build successfully but when I run osmo-trx —help, it shows only
one option that is -C which I can use with osmo-trx, no other options
are available, is it cannot be build completely on raspberry pi 3? or
what’s gone wrong? any suggestions/comments in this regard please.
Thank you for your support & time please.
Regards
Babar
On Thursday, July 12, 2018, 1:26 AM, Harald Welte <laforge(a)gnumonks.org>
wrote:
On Wed, Jul 11, 2018 at 04:53:54PM +0000, Babar Ali wrote:
Anyone has an experience of Setuping 2G Network
using NITB &
LimeSDR Mini, which version of osmotrx is working fine with
LimeSDR
Mini.
We have seen very good results using the new osmo-trx-lms with
LimeSDR-mini.
--
- Harald Welte <laforge(a)gnumonks.org <mailto:laforge@gnumonks.org>>
http://laforge.gnumonks.org/
============================================================
================
"Privacy in residential applications is a
desirable marketing option."
(ETSI EN 300
175-7 <tel:300%20175-7> Ch. A6)
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte