I have build following components from source.1. SoapySDR v0.6.12. Lime Suite v18.06.03. UHD v3.12.0.0-rc14. SoapyUHD v0.3.45. osmo-trx v0.4.0 configure --with-lms6. osmo-nitb7. osmo-bts-trxhowever i have only following options are available with osmo-trxroot@miniBTS:/home/pi/osmocom/osmo-trx# osmo-trx-lms -hOptions:-h This text-C Filename The config file to use-V Print the version of OsmoTRXI have run each instance in separate windows but I cannot show network, log file of following screens along with config files attached. would you please help me whats going wrong, I am newbieterminal 1 : osmo-trx-lms -C osmo-trx-limesdr.configterminal 2: osmo-nitb -c openbsc.configterminal 3: osmo-bts-trx -c osmobts.configattached config files have grabbed from https://github.com/myriadrf/cellular-network- configs/tree/master/osmocom RegardsBabar AliOn Saturday, 14 July 2018, 4:31:43 AM GMT+5, Pau Espin Pedrol <pespin@sysmocom.de> wrote:Hi Babar,
If you want to use a LimeSDR-mini, you should build latest master, and
use osmo-trx-lms binary. To generate that binary, you first need to
build and install latest LimeSuite master [1], and then build osmo-trx
with --with-lms configure flag. As you are building for raspberry pi3,
you may want to enable instruction set optimizations as explained in the
user manual section "12 OsmoTRX hardware architecture support" [2]. Have
a look at the wiki page too for further information [3].
Also a reminder: we have osmo-trx-lms already available as a debian
package for debian9 [4], but I think we don't enable NEON on that build.
[1] https://github.com/myriadrf/LimeSuite
[2] http://ftp.osmocom.org/docs/latest/osmotrx-usermanual.pdf
[3] https://osmocom.org/projects/osmotrx/wiki/OsmoTRX
[4]
https://download.opensuse.org/repositories/network:/osmocom: /nightly/Debian_9.0/
On 12/07/18 01:36, Babar Ali wrote:
> Hi Harald
>
> Thank very much for your support please, i’ll test & share the results.
>
> Further kindly let me clear one more thing please, can I build osmotrx
> on RaspbianOS, I have already tried to build osmotrx v0.3 on RasbianOS
> it was build successfully but when I run osmo-trx —help, it shows only
> one option that is -C which I can use with osmo-trx, no other options
> are available, is it cannot be build completely on raspberry pi 3? or
> what’s gone wrong? any suggestions/comments in this regard please.
>
> Thank you for your support & time please.
>
> Regards
> Babar
>
> On Thursday, July 12, 2018, 1:26 AM, Harald Welte <laforge@gnumonks.org>
> wrote:
>
> On Wed, Jul 11, 2018 at 04:53:54PM +0000, Babar Ali wrote:
>
> > Anyone has an experience of Setuping 2G Network using NITB &
> LimeSDR Mini, which version of osmotrx is working fine with LimeSDR
> Mini.
>
>
> We have seen very good results using the new osmo-trx-lms with
> LimeSDR-mini.
>
> --
> - Harald Welte <laforge@gnumonks.org <mailto:laforge@gnumonks.org>>
> http://laforge.gnumonks.org/
> ============================================================ ================
> "Privacy in residential applications is a desirable marketing option."
> (ETSI EN 300
> 175-7 <tel:300%20175-7> Ch. A6)
>
--
- Pau Espin Pedrol <pespin@sysmocom.de> http://www.sysmocom.de/
============================================================ ===========
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte