Re: Patch for OpenBSC [Nokia Site family]

Dear Holger, I think I found a better way for initialization. The attached version of the patch builds against latest master OpenBSC, contains the fixes I missed from the previous version. Tested: 1. Without using the config parameter, the reset timer defaults to 15 seconds (as before), 2. With the configuration parameter, the reset timer will use the specified value. Tested with: InSite (daisy chained, two BTSes), MetroSite and UltraSite units. Will create another patch for hopping (both baseband and sytheiser hopping works, but it needs a change in the sourcecode, like the reset timer before). There is another minor problem at the moment: UltraSite needs additional time after OMU configuration done, before it can bootstrap the RSL links. This is due to the fact that UltraSite starts to load the TRX SW after it got the "Use current" command, and it takes arouned 45-50 seconds for the TRXes to be ready for LAPD. So to first RSL bootstrap should be delayed after OMU config complete is received by the BSC. Now the RSL link is bootstrapped right after the OMU is configured and the LAPD link times out way before the TRX will be ready for LAPD. Will try to create a patch for this too, until then, a small hack can make this problem go away (changing n200 parameter to 100). Regards, Csaba ----- Eredeti üzenet ----- Feladó: "Holger Hans Peter Freyther" <holger(a)freyther.de> Címzett: "Sipos Csaba" <sipos.csaba(a)kvk.uni-obuda.hu> Elküldött üzenetek: Hétfő, 2015. Február. 2. 9:50:50 Tárgy: Re: Patch for OpenBSC [Nokia Site family] On Sun, Feb 01, 2015 at 10:53:19PM +0100, Sipos Csaba wrote: It is not the best place but gsm_bts_alloc would allow you to initialize this field correctly. The other option would be when the type of the bts is set to nokia.