2 Aug
2011
2 Aug
'11
9:34 p.m.
Hello,
I have a ursp1 working fine and I want to use my c123 to conenct to it
with osmocombb.
Now I face some problems. First of all I have no sim, so I do:
sim testcard 1 001 01
The usrp runs a testnetwork (001 01)
I don't know how I can associate with the usrp. I tried:
network search (lot of output and also my testnet)
network show (nothing happens)
network select 1 001 01: Network not in list!
Any idea what I'm doing wrong? Would be really Cool if i could use
opensource only.
With best regards,
Paul
13 Feb
13 Feb
6:05 p.m.
Hi Paul,
I'm fighting a similar problem while using the current development
branch of OsmocomBB. Trying to connect to both OpenBSC and OpenBTS using
the test SIM that's available in OsmocomBB.
I have a Motorola C123.
Is this feature supposed to be fully functional at the moment?
Before trying to associate, I switched the mobile to the
network-select-mode: manual.
The latest behavior is that it's not possible to connect to OpenBSC with
the following output from the "mobile" OsmocomBB app:
OsmocomBB# show cell 1
ARFCN |MCC |MNC |LAC |cell ID|forb.LA|prio |min-db
|max-pwr|rx-lev
-------+-------+-------+-------+-------+-------+-------+-------+-------+-------
514DCS|230 |10 |0x04b9 |0x0ba8 |no |normal |-110 | 0 |-51
571DCS|230 |09 |0x2058 |0x69d7 |no |normal |-105 | 5 |-66
648DCS|230 |01 |0x6050 |0x3571 |no |normal |-105 | 0 |-69
777DCS|230 |03 |0x1f5e |0x2aba |no |normal |-105 | 0 |-87
OsmocomBB# network select 1 230 10
Network not in list!
To force selecting this network, use 'force' keyword
OsmocomBB# network select 1 230 10 force
OsmocomBB# show ms
MS '1' is up, service is limited
IMEI: 000000000000000
IMEISV: 0000000000000000
IMEI generation: fixed
manual network selection state : M5 no SIM inserted
cell selection state: C0 null
radio ressource layer state: idle
mobility management layer state: MM idle, PLMN search
Thanks,
Martin
Hello,
I have a ursp1 working fine and I want to use my c123 to conenct to it
with osmocombb.
Now I face some problems. First of all I have no sim, so I do:
sim testcard 1 001 01
The usrp runs a testnetwork (001 01)
I don't know how I can associate with the usrp. I tried:
network search (lot of output and also my testnet)
network show (nothing happens)
network select 1 001 01: Network not in list!
Any idea what I'm doing wrong? Would be really Cool if i could use
opensource only.
With best regards,
Paul
14 Feb
14 Feb
8:58 a.m.
Hi Peter and others,
Yes, I had enabled the software sim before trying to associate with the
BTS. I also defined my IMSI and rebooted the phone afterwards.
Maybe, I'd like the people here to answer these questions for me, if
possible:
Is the "test sim/soft sim/testcard" feature fully functional in the
current release of OsmocomBB?
(I want to try couple scenarios with a OpenBSC test setup that another
student has been running at our faculty. I'm setting up a OpenBTS/USRP
scenario too.)
Is the sim reader feature in the "mobile" app currently able to work
with HW sim cards?
(I want to try running the FOSS firmware as a normal phone for a bit.)
If my Motorola C123 is sim-locked to some German service provider, do I
have to find ways to unlock it to be able to run a Czech sim card or
does the OsmocomBB firmware override the sim lock by default?
I think I was unsuccessful last time I tried popping one in and enabling
it through "OsmocomBB mobile". I can provide more info after I've
re-tried this.
I hope my questions stick to the spirit of this list well enough, if
not, please let me know.
Thanks,
Martin
Dne 13.2.2012 18:22, Peter Stuge napsal(a):
Martin Janovský wrote:
OsmocomBB# show ms
MS '1' is up, service is limited
IMEI: 000000000000000
IMEISV: 0000000000000000
IMEI generation: fixed
manual network selection state : M5 no SIM inserted
This looks bad. Did you
enable the sim?
//Peter
4461
days inactive
4657
days old
baseband-devel@lists.osmocom.org
3 comments
3 participants
participants (3)
-
Martin Janovský -
Paul Lambert -
Peter Stuge