14 May
2013
14 May
'13
2:41 p.m.
Hello
My Motorola batteries are all swollen and therefore defective. anyone
has a solution for connecting to power directly to the battery connector
by usb?
I thought used a 3.7V zener diodes in parallel between the - and + USB
power and a series resistor.
Thank you.
14 May
14 May
3:24 p.m.
choukoumoun wrote:
anyone has a solution for connecting to power directly
to the
battery connector by usb?
I thought used a 3.7V zener diodes in parallel between the - and +
USB power and a series resistor.
I've used LP3874. You'll need a fair bit of capacitance in order to transmit.
//Peter
3:49 p.m.
Le 14/05/2013 15:24, Peter Stuge a écrit :
choukoumoun wrote:
Nice !!!!
How you connect?
it was just the power connect to a USB port and trasmition and another
connection.
anyone has a solution for connecting to power
directly to the
battery connector by usb?
I thought used a 3.7V zener diodes in parallel between the - and +
USB power and a series resistor.
I've used LP3874. You'll need a fair bit
of capacitance in order to transmit.
//Peter
4:22 p.m.
choukoumoun wrote:
Nice !!!!
How you connect?
I designed a PCB with a battery contact and a case to hold it in
place. I've seen several people solder connections permanently to
the phone.
anyone has a solution for connecting to power directly
to the
battery connector by usb?
I thought used a 3.7V zener diodes in parallel between the - and +
USB power and a series resistor.
I've used LP3874. You'll need a fair bit of capacitance in order to
transmit. it was just the power connect to a USB port and
trasmition and
another connection.
I don't understand this.
//Peter
5:34 p.m.
New subject: [osmocom] ******* battery
Le 14/05/2013 16:22, Peter Stuge a écrit :
choukoumoun wrote:
Nice !!!!
How you connect? I designed a PCB with a battery contact and a case to hold it in
place. I've seen several people solder connections permanently to
the phone.
Great !!!! Ok you will have a connection diagram? or a file for the PCB?
I meant that I do not want
to mix power and serial connection
anyone has a solution for connecting to power directly
to the
battery connector by usb?
I thought used a 3.7V zener diodes in parallel between the - and +
USB power and a series resistor.
I've used LP3874. You'll need a fair bit
of capacitance in order to
transmit. it was just the power connect to a USB port and
trasmition and
another connection.
I don't understand this.
//Peter
8:13 p.m.
A 'Fucking' Battery, I haven't ever seen one of those before.
Perhaps some decorum in your choice of words on a mailing list would help.
4:19 p.m.
14.05.2013 15:24, Peter Stuge пишет:
choukoumoun wrote:
Is it possible to combine both signal and power lines within one usb cable?
Would love to see schematics.
--
best regards,
Max, http://fairwaves.ru
anyone has a solution for connecting to power
directly to the
battery connector by usb?
I thought used a 3.7V zener diodes in parallel between the - and +
USB power and a series resistor.
I've used LP3874. You'll need a fair bit of capacitance in order to transmit.
//Peter
4002
days inactive
4002
days old
baseband-devel@lists.osmocom.org
6 comments
4 participants
participants (4)
-
choukoumoun -
Dave Davies -
Peter Stuge -
☎