Re: help me i have motorola c123

hello i have Motorola c123 The following are my steps: 1- $ cd osmocom-bb $ git checkout -b testing remotes/origin/sylvain/testing fatal: git checkout: branch testing already exists 2- ~/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/layer1.compalram.bin got 2 bytes from modem, data looks like: 2f 00 /. got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin): file_size=51320, hdr_len=4, dnload_len=51327 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/51327) handle_write(): 4096 bytes (8192/51327) handle_write(): 4096 bytes (12288/51327) handle_write(): 4096 bytes (16384/51327) handle_write(): 4096 bytes (20480/51327) handle_write(): 4096 bytes (24576/51327) handle_write(): 4096 bytes (28672/51327) handle_write(): 4096 bytes (32768/51327) handle_write(): 4096 bytes (36864/51327) handle_write(): 4096 bytes (40960/51327) handle_write(): 4096 bytes (45056/51327) handle_write(): 4096 bytes (49152/51327) handle_write(): 2175 bytes (51327/51327) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! OSMOCOM Layer 1 (revision osmocon_v0.0.0-786-g937023b) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: df0d1621a400d808 ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== THIS FIRMWARE WAS COMPILED WITHOUT TX SUPPORT!!! Assert DSP into Reset Releasing DSP from Reset Setting some dsp_api.ndb values Setting API NDB parameters DSP Download Status: 0x0001 DSP API Version: 0x0000 0x0000 Finishing download phase DSP Download Status: 0x0002 DSP API Version: 0x3606 0x0000 LOST 1968! 3- ~/osmocom-bb/src/host/layer23/src/mobile$ ./mobile Copyright (C) 2008-2010 ... Contributions by ... License GPLv2+: GNU GPL version 2 or later &lt;http://gnu.org/licenses/gpl.html&gt; This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. <000e> sim.c:1206 init SIM client <0005> gsm48_cc.c:61 init Call Control <0001> gsm48_rr.c:4944 init Radio Ressource process <0004> gsm48_mm.c:1220 init Mobility Management process <0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM. <0002> gsm322.c:3472 init PLMN process <0003> gsm322.c:3473 init Cell Selection process Mobile '1' initialized, please start phone now! VTY available on port 4247. <0004> subscriber.c:556 Requesting SIM file 0x2fe2 <000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000e> sim.c:697 go MF <000e> sim.c:241 SELECT (file=0x3f00) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4) I wait and wait and nothing happens to keep as is? What is the solution to this problem? I hope someone can help me as soon as -- View this message in context: http://baseband-devel.722152.n3.nabble.com/help-me-i-have-motorola-c123-tp3… Sent from the baseband-devel mailing list archive at Nabble.com.