RSSI Firmware of OpenMoko GTA02

Hi; I am trying to run rssi.highram.bin on gta02(openmoko) following this [1] gta02 is running SHR-lite distro So far I have 1. cross-compiled rssi firmware using arm-elf- toolchain 2. cross-compiled osmocon for phone using arm-angstrom-linux-gnueabi- [2] make -e CROSS_TOOL_PREFIX=arm-angstrom-linux-gnueabi- HOST_CONFARGS="--host=armv4t-angstrom-linux-gnueabi" 3. Make sure that nothing else is using /dev/ttySAC0 4. loaded rssi firmware on gta02 by running on gta02 ./osmocon -i 13 -m romload -p /dev/ttySAC0 rssi.highram.bin Firmware loads succesfully when I toggle power of baseband using echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on && echo 1 but it scans only ARFCN 1 :< SIM is present but since /dev/ttySAC0 is only claimed by osmocon, I dont think it can be used by ogsmd [1] http://bb.osmocom.org/trac/wiki/OpenMoko http://bb.osmocom.org/trac/wiki/OpenMoko [2] http://wiki.openmoko.org/wiki/Toolchain http://wiki.openmoko.org/wiki/Toolchain My QUESTIONS are: ================= 1. How can I Scan all ARFCN? 2. Can we use /dev/ttySAC0 for gsm & other things after the firmware is loaded on baseband? LOG FILE: http://baseband-devel.722152.n3.nabble.com/file/n3863628/log log -- View this message in context: http://baseband-devel.722152.n3.nabble.com/RSSI-Firmware-of-OpenMoko-GTA02-… Sent from the baseband-devel mailing list archive at Nabble.com.