7 Jan
2011
7 Jan
'11
5:30 p.m.
By the way.. If I use a tool chain built according to the mentioned wiki page, the
resulting firmware does not work! It is impossible to initialize the flash..
Some weeks ago, I started debugging this. I found out that, as much I can remember, the
CFI layer gives a bad protocol id (or version). I expected that it could be related to
some padding or alignment differences...
If I use binutils-2.17, gcc-4.1.1-c-c++, newlib-1.14.0, everything works fine
Matthias
Am 07.01.2011 um 16:34 schrieb Bogdan Alecu:
I used the steps from here
http://bb.osmocom.org/trac/wiki/GnuArmToolchain to build the toolchain. I also tried with
and without xor, no results.