17 Jan
2011
17 Jan
'11
4:32 a.m.
Hi Lia,
I have tested another cable (USB <-> 2,5 jack, speacial for Compal
phones) - it is the same chip (Prolific) and I am able to load firmware
too. Although it is the same chip, there is a difference that this one
makes the osmocon printing those messages instantly when phone is not
connected:
got 1 bytes from modem, data looks like: f5 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f5 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f5 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f5 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: ea .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: ea .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: ea .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: ea .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: ea
If I connect phone, printing stops. Here is what happened when I tried
to load firmware without xor (-m c123) and pressed the button:
(This happened every attempt without xor flag)
Received PROMPT2 from phone, starting download
handle_write(): 1087 bytes (1087/50947)
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 45 E
got 1 bytes from modem, data looks like: 53 S
got 1 bytes from modem, data looks like: 16 .
Received DOWNLOAD NACK from phone, something went wrong :(
got 1 bytes from modem, data looks like: 66 f
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6d m
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6c l
Received FTMTOOL from phone, ramloader has aborted
got 1 bytes from modem, data looks like: 65 e
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 00 .
If you have USB adapter (I guess you have), you dont need to check
model, check 'lsusb'
[root@amilo osmocon]# lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
*Bus 002 Device 017: ID 067b:2303 Prolific Technology, Inc. PL2303
Serial Port*
If you have Prolific, which is very common, I encourage you to use xor
flag. You can also try to switch on your phone to check if original
firmware boots. I experienced during my early tests, that phone crashed
(probably SRAM) and it was unable to boot even original fw. In case
phone is crashed, reconnect battery and it will fix itself.
Here is the ACK after hello world load:
handle_write(): 768 bytes (17919/19787)
handle_write(): 768 bytes (18687/19787)
handle_write(): 768 bytes (19455/19787)
handle_write(): 332 bytes (19787/19787)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 03 .
got 1 bytes from modem, data looks like: 42 B
Received DOWNLOAD ACK from phone, your code is running now!
OSMOCOM Hello World (revision osmocon_v0.0.0-754-gb5abcb6-modified)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: efce3b1ce1001255
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
==============================================
Looking forward your response,
Tomas
Hi Tomas,
thanks for your feedback.
Actually, I've tried both flags (woth/without xor extension), but hte
result is the same.
So, in your opinioni, the problem could depend on the cable?
I don't have the cable model now, but I can send you this information
Tuesday.
Thanks again.
cheers.
lia
----Messaggio originale----
Da: deacon(a)volny.cz
Data: 16-gen-2011 4.26
A: <list_mailing(a)libero.it>
ubut Ogg: Re: C115 loader.compalram.bin
Hello,
I have C115 too and I use '-m c123xor' switch, the phone mostly
boots on 1st button push (I never reacher full load with '-m c123').
./osmocon -p /dev/ttyUSB0 -m c123xor
../../target/firmware/board/compal_e88/hello_world.compalram.bin
./osmocon -p /dev/ttyUSB0 -m c123xor
../../target/firmware/board/compal_e88/loader.compalram.bin
./osmocon -p /dev/ttyUSB0 -m c123xor
../../target/firmware/board/compal_e88/layer1.compalram.bin
I have FTDI USB<->RS232 + Calypso serial. When load fails (with
xor), I have a feeling that it helps reconnection cable to the phone.
(I have also Calypso USB cable which I haven't tested yet, will
report later.)
- Tomas
Hello.
I'm trying to load the loader.compalram.bin.
The behaviour is very strange because sometimes the download is complete and
successfull, sometimes; in particular, in this case, the download is complete,
but any ACK is sent back from the mobile phone (see below).
./osmocon -p /dev/ttyUSB0 -m c123 ../..
/target/firmware/board/compal_e99/loader.compalram.bin
got 2 bytes from modem, data looks like: 2e c8 ..
got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A
got 1 bytes from modem, data looks like: 01 .
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
read_file(../../target/firmware/board/compal_e99/loader.compalram.bin):
file_size=21752, hdr_len=4, dnload_len=21759
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 43 C
Received PROMPT2 from phone, starting download
handle_write(): 4096 bytes (4096/21759)
handle_write(): 4096 bytes (8192/21759)
handle_write(): 4096 bytes (12288/21759)
handle_write(): 4096 bytes (16384/21759)
handle_write(): 4096 bytes (20480/21759)
handle_write(): 1279 bytes (21759/21759)
handle_write(): finished
The target phone is C115. I tried compal_exx and the result is the same :-(
Please, can someone help me to understand the reasons?
Thanks in advance.