20 Jan
2011
20 Jan
'11
9:31 p.m.
Hi,
I tried to follow instruction on SIM Reader wiki, but seems I got different result.
OsmocomBB> enable
OsmocomBB# sim reader 1
OsmocomBB# show subscriber
Mobile Subscriber of MS '1':
IMSI:
Status: U2_NOT_UPDATED IMSI detached LAI: invalid
Access barred cells: no
Access classes:
OsmocomBB# show support
Supported features of MS '1':
Phase 2 mobile station
R-GSM : yes
E-GSM : yes
P-GSM : yes
GSM900 Class: 4
DCS 1800 : yes
DCS Class : 1
CECS : no
VGCS : no
VBS : no
SMS : yes
SS_IND : yes
PS_CAP : no
CMSP : no
SoLSA : no
LCSVA : no
LOC_SERV : no
A5/1 : yes
A5/2 : yes
A5/3 : no
A5/4 : no
A5/5 : no
A5/6 : no
A5/7 : no
A5/1 : yes
Channels : SDCCH + TCH/F + TCH/H
Full-Rate V1: yes
Full-Rate V2: yes
Full-Rate V3: no
Half-Rate V1: yes
Half-Rate V3: no
Min RXLEV : -106
OsmocomBB# show ms
MS '1' is down, radio is not started
IMEI: 000000000000000
IMEISV: 0000000000000000
IMEI generation: fixed
automatic network selection state: A0 null
cell selection state: C0 null
radio ressource layer state: idle
mobility management layer state: MM idle, PLMN search
from the layer23 part,
$ ./mobile -i 127.0.0.1 -d
Copyright (C) 2008-2010 ...
Contributions by ...
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
mobile: option requires an argument -- d
VTY available on port 4247.
No Mobile Station defined, creating: MS '1'
<000e> sim.c:1206 init SIM client
<0005> gsm48_cc.c:61 init Call Control
<0001> gsm48_rr.c:4944 init Radio Ressource process
<0004> gsm48_mm.c:1220 init Mobility Management process
<0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:3471 init PLMN process
<0003> gsm322.c:3472 init Cell Selection process
<0003> gsm322.c:3526 No stored BA list
Mobile '1' initialized, please start phone now!
<0004> subscriber.c:556 Requesting SIM file 0x2fe2
<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000e> sim.c:697 go MF
<000e> sim.c:241 SELECT (file=0x3f00)
<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
can't perform location update, and from the error, is that mean the application failed
to read the simcard correctly?
and what's the meaning of "Mobile '1' initialized, please start phone
now!", is it starting the phone by push the power button? if so, since the firmware
is loaded I can't make the phone start like using original firmware. If i push the
button, it will show message like
Found flash of 2097152 bytes at 0x0 with 2 regions
Region 0 of 31 pages with 65536 bytes each.
Region 1 of 8 pages with 8192 bytes each.
key=20 pressed
Powering off due to keypress.
I am using motorola c118 anw. any clue about this error?
Thanks.
Best Regards,
Rasyid